Missing ASMS

Have a fatal error, asms pack 1 xp missing that happened when trying to re - install XP on a new HD. Some installed then error appeared.

SamDoughboy

Hi Sam,

Visit this link for a Microsoft solution

Tags: Windows

Similar Questions

Re-install Windows XP Pro: Windows will not start - WINDOWS/system32/config/SYSTEM missing or damaged

Windows tells me to run the install from the original CD, and then to enter the 'r' to repair the problem. I never get: Windows reboots repeatedly, or it crashes just without giving me the chance to enter the 'r '. A Windows XP Pro with SP3 iso file did not help; not more than another copy of a Windows XP Pro with SP2 CD. What should I do now? How can I systematically enter the Windows installation, and how can I do a repair installation?

Yaaakov Kayman, retired engineer-programmer/software system (for the most-mainframe)

http://support.Microsoft.com/kb/311755

read the above for asms file missing

==========

also please note that you can not do a repair install on xp sp3 with a cd of xp sp2.

It must be a cd with sp3 slipstreamed CD.

=====

If you can get into your bios default and the cd to start everything first and try again, what happens this time?

In addition, clean the cd by wiping gently from the Center to the edge, NOT in a circle, with a soft cloth wet litely.

your cd can have a streak that gives you the error.

=========

It can also be your player, you have a tower with two drives? If so pass out them and see if the problem occurs.

Missing file of sludge activated when installing XP

Recently, I reformatted the hard drive on my computer and tried to reinstall Windows XP. I get half way through installation and getting a message says that the asms file is missing and gives me the possibility to locate the file on the computer. How can I solve this problem?

If you do a Google search on your error message, you will find a few good ideas that have several happy endings (this seems to be a relatively common problem). There is even a Microsoft KB article on this subject, but depends on several unknown factors, it may not work for you:

http://support.Microsoft.com/default.aspx?scid=KB; EN-US; Q311755

There are other ideas on the Internet that appear to be effective when the article MS does not work.

It's a shame that we know absolutely nothing about your system, but that's the way it goes around here.

If we knew more about your system and what you have, you would probably be done now!

I'm moving to Windows XP, Vista, I got an error stating - Int failed: E:\i386\asms

E:\i386\asms. error

I'm moving to Windows XP, Vista, I got an error stating - Int failed: E:\i386\asms. and told me I/O device missing and do anythging else used.

Hello

Unfortunately, it seems that you are using the Windows XP CD is corrupt and therefore unusable for installation. Please see: How to replace lost Microsoft software

Kind regards

Chauvet J.

switch from vista to xp - Int failed: E:\i386\asms.

I'm trying to switch back to Windows XP, Vista. I had to send my laptop in for repair and they loaded Vista on it because that's what was on this subject during the purchase. I bought this from a company that had upgraded to XP, which I like much better. I got an error stating - Int failed: E:\i386\asms. He also tells me that I'm missing some files - xmlp-*-xdr. Don't know what that means. As I load the CD for XP he showed some files would not be responsible and gave me the the ability to jump, which I did because it would'nt I would try again. They finished with xmp. Anyone got the answers or help for me? I cannot get my laptop to start because of this and don't know what to do?
Thanks in advance!
Dee

Unfortunately, it seems that you are using the Windows XP CD is corrupt and therefore unusable for installation. Please see: How to replace lost Microsoft software

logfile missing watch on the primary database

In a 11.2.0.4 database, we have configured Data Guard, so they created pending log files, but it has been deleted in ASM + accidentally.
Thus, research in the database primary, the newspaper observed log pending files, but is not in ASM +.
In the alert log has not been recorded event.
I can do the recreation of the eve logfiles?
What role can have on the primary database?
Our configuration:
BECAUSE with 4 cases
--
logonline 5 groups for example
each group of logonline with 2 members
--
6 standby of the group e.g.
each group watches with 2 members
Total 48 asm file missing
Select *-Group #, Member
v $ logfile where type = "STANDBY".
order by group #.
GROUP # STATUS TYPE MEMBER IS_RECOVERY_DEST_FILE
No. 51 +DATA_EXA/prep/onlinelog/group_51.1613.804140169 EVE
No. 51 +RECO_EXA/prep/onlinelog/group_51.2918.804140175 EVE
No. 52 +DATA_EXA/prep/onlinelog/group_52.1614.804140479 EVE
No. 52 +RECO_EXA/prep/onlinelog/group_52.4182.804140485 EVE
....
.....
74 No. +DATA_EXA/prep/onlinelog/group_74.972.875418965 day BEFORE
74 No. +RECO_EXA/prep/onlinelog/group_74.14330.875418971 day BEFORE
ASMCMD >
ASMCMD > ls-l +DATA_EXA/prep/onlinelog/group_74.972.875418965
ASMCMD-8002: entry 'group_74.972.875418965' does not exist in the directory ' + prep/DATA_EXA/onlinelog /'
ASMCMD >
ASMCMD >

Redologs Eve will be active when the database is in the role of Eve, so you can drop the watch group redologfile missing for the thread and add it again.

You have lost all the groups newspaper waiting for redo for all threads?

On primary, you can drop all odds redolog groups because they will be unassigned State on the standby database make sure the group is unassigned status before falling

Select Group #, THREAD #, STATUS from v$ standby_log;

RMAN, restoration of ASM no - asm environment!

Dear friends,
WE are running Oracle 11 GR 2 CARS as our PRODUCTION server. also, we have a single instance, DATAGUARD, where production data are replicated.
On the end DATAGUARD, we take a weekly full backup RMAN. My db_name is 'isldb '.
Now I want to restore the backup, RMAN COMPLETE the DATAGUARD server to a new server NO - ASM using file system normal... For this reason, I have to follow the procedure below:
(1) take RMAN full backup of DATAGUARD END as a stage to mount and store it on ' / rmanback' file. I use the below taken backup script:
Run {}
allocate channels d1 device type disk format ' / rmanback/isl/$TODAY/df_%U_%T';
allocate channel device type d2 disc format ' / rmanback/isl/$TODAY/df_%U_%T';
backup database effective additional 0 CHECK the LOGIC AS BACKUPSET COMPRESS;
backup format ' / rmanback/isl/$TODAY/controlfile.ctlbk' (current controlfile);
backup format ' / rmanback/isl/$TODAY/spfile.spbak' (spfile);
ARCHIVELOG backup all;
output channel d1;
output channel d2;
}
(2) the transfer of the rman backup complete on a remote server on the same ' / rmanback' file.
(3) in the new server, I take the scene nomount database using a spfile (spfile has a single entry: 'DB_NAME = isldb')
(4) then I restore the controlfile successfully:
[oracle@PRIM ~] target rman $ /.
Recovery Manager: release 11.2.0.3.0 - Production Wed Aug 20 16:01:21 2014
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database: ISLDB (unassembled)
RMAN > restore controlfile to ' / rmanback/isl/20140810_181405/controlfile.ctlbk';
From restoration to 20 August 14
using the control file of the target instead of recovery catalog database
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID = 332 type device = DISK
channel ORA_DISK_1: restore the control file
channel ORA_DISK_1: restore complete, duration: 00:00:01
output file name=/u01/app/oracle/oradata/isldg/control01.ctl
output file name=/u01/app/oracle/oradata/isldg/control02.ctl
Finished restore at August 20, 14
(5) to restore the data successfully file using the command below:
run
{
the value of newname for datafile '+ DATA/isldg/datafile/system.298.849413815' to ' / u01/app/oracle/oradata/isldb/system1.dbf';
the value of newname for datafile '+ DATA/isldg/datafile/sysaux.295.849413813' to ' / u01/app/oracle/oradata/isldb/sysaux1.dbf';
the value of newname for datafile '+ DATA/isldg/datafile/undotbs1.296.849413813' to ' / u01/app/oracle/oradata/isldb/undotbs1.dbf';
the value of newname for datafile '+ DATA/isldg/datafile/undotbs2.297.849413815' to ' / u01/app/oracle/oradata/isldb/undotbs2.dbf';
the value of newname for datafile '+ DATA/isldg/datafile/users.299.849413849' to ' / u01/app/oracle/oradata/isldb/users1.dbf';
the value of newname for datafile '+ DATA/isldg/datafile/bu_system_tbs.291.849413617' to ' / u01/app/oracle/oradata/isldb/bu_system_tbs1.dbf';
the value of newname for datafile '+ DATA/isldg/datafile/bu_his_log_tbs.292.849413617' to ' / u01/app/oracle/oradata/isldb/bu_his_log_tbs1.dbf';
the value of newname for datafile '+ DATA/isldg/datafile/bu_index_tbs.293.849413617' to ' / u01/app/oracle/oradata/isldb/bu_index_tbs1.dbf';
the value of newname for datafile '+ DATA/isldg/datafile/bu_image_tbs.294.849413619' to ' / u01/app/oracle/oradata/isldb/bu_image_tbs1.dbf';
the value of newname for tempfile 1 to ' / u01/app/oracle/oradata/isldb/temp1.dbf';
restore the database;
}
RESTORATION came with success, and all data files store in the folder specified with success.
(6) now when I recover the database, then I found the below error:
> SQL > alter database open resetlogs;
ALTER database open resetlogs
ERROR on line 1:
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: '+ DATA/isldg/datafile/system.298.849413815 '.
> SQL > restore database;
ORA-00283: cool cancelled due to errors
ORA-01610: recovery using BACKUP CONTROLFILE option must be
> SQL > restore database until cancel using backup controlfile;
ORA-00283: cool cancelled due to errors
ORA-01110: data file 1: '+ DATA/isldg/datafile/system.298.849413815 '.
ORA-01157: cannot identify/lock data file 1 - see DBWR trace file
ORA-01110: data file 1: '+ DATA/isldg/datafile/system.298.849413815 '.
Could someone help me please, how can I recover as open my database?

Your archivelog was not "missing." He seems to have a different file name format.

No one can touch «_allow_resetlogs_corruption» action You are now on your own.

Hemant K Collette

RMAN duplicate for standby the active database and the missing data files

We have a car of 2 node ASM 11 GR 2 and 11.1 of database and a standby with ASM also. Our database is relatively low (300 GB)
and in one recent event the day before was such a departure from the primary that we decided to "repopulate" the data using duplicate RMAN.
I deleted the data files of the previous day and followed the Oracle documentation to duplicate a database. In the waiting
I created a static listener and a pfile containing only the essential information (db_unique_name). I started the day before with nomount using the 'empty' pfile.
I run RMAN, connected to the target and ancillary catalogues and run this command:
```
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate channel prmy5 type disk;
allocate auxiliary channel stby1 type disk;
duplicate target database for standby from active database nofilenamecheck;
}
```
RMAN duplication completed without errors, so I started the rescue database and got
an error saying that datafile XXX is missing. I checked XXX datafile at the primary level
and it is in a DISCONNECTED state. In the standby database the same data file is in the online state.
So I think the problem is that during the duplication, RMAN (as documentation States) does not work
Copy the files of data in offline mode, but the standby control file seem to think that these data files
are online and should be present.
Can someone please help me solve this problem? From my understanding, I could just copy the missing persons
data files (there are many however) and in the standby go offline, but I don't think it's
the right solution, edit this file for control of the standby? I would add another option
in the RMAN script?

Take the data file in offline mode on the site of the previous day.

I don't think that two COPIES try to manage separately offline files.

Hemant K Collette

Missing files in the command "copy list" once restored controlfile

Hello
Perform the restore/recovery exercise (11 GR 2 on ASM), I did the following:
1 / the DB running, "copy list" in RMAN (to retrieve a list of my backups).
2 / done one the judgment then went to AMSCMD and deleted all the files in data/ctlfile/spfile manually
(wanted to test a complete restoration with nothing but archives and backups),.
3 / managed to restore my spfile with ' restore spfile to ' + DATA...» »,
4 / then could "startup mount" my DB and restore controlfile with
«Restore controlfile from «+ FRA/DBNAME/BACKUPSET/2014_01_29/ncnnn...»» » ; »
5 / then I "copy list" once again
and here, I saw 3 files were missing (so I started to meet a lot of problems
so we can still restore/recovery...)
Someone has already encountered this problem before?
Thank you very much in advance...
SEB

Hello

When you have restored a controlfile from a backup, it will list only copies or backup that have been registered with this controlfeil, if you want to catalog backups to restore controlfile, you can use the catalog command.

Thank you

ASM shutdown problem

Hi experts,
suddenly I've faced shutdown ASM on a 2 RAC node problems. When trying to reboot the second node of the ora.asm of resources cannot be stopped.
The closure of the ASM runs out after 10 minutes. There is an interesting line in the ohasd.log saying that the DSO cannot be stopped because of an error: 3.
Anyone know what this means? I googled hours and hours without success, even in MOS I have not found any additional information.
Help is greatly appreciated!
Thank you very much
Volker
PS My environment:
-2 node RAC OEL 6.3
-11.2.0.4 oracle Enterprise Edition

Hi gentlemen,

I think I solved my problem with the help of google omniscient. :-)

So far, there seems to be a missing entry in the local/etc/hosts (on the second node) to the second node.

So I added the line

192.168.0.112 rac2.localdomain rac2

and this morning, everything was fine.

Thank you very much for your advice!

Concerning

Volker

How to take database backup ASM/Instance?
Hello

I'm new with ASM. We take ASM/instance of database backup.

can we have the idea to backup ASM?

1. what components should be saved as database/Instance ASM / ASM all files?

Please do the needful.

Thank you
Nitin
Hello Nitin,

First of all, you must understand that the RDBMS & ASM instance is different but yes, both are running on the same computer.

ASM includes essentially two things: ASM instance (1) and the storage of the DSO (2).

(1) ASM instance
------------------------

That's just an instance when we do not backup but Yes if you want to keep the ASM instance configuration file then just follow these steps:

[grid@host01 ~] $. oraenv
ORACLE_SID = [+ ASM1]? + ASM1
The basic Oracle for ORACLE_HOME=/u01/app/11.2.0/grid is/u01/app/grid

SQL > create pfile='/home/grid/init+ASM1.ora' of spfile;

Created file.

(2) ASM STORAGE
-------------------------

-Storage ASM includes essentially ASM starts, namely new set of disks.

-Whenever we do not create ASM diskgroup diskgroup contains still three things:

(a) disc ASM
(b) models and metadata
(c) the ASM files (essentially datafile or all database files)

-We take backup of two things on three things in ASM diskgroup:

(1) ASM files - with RMAN because these are files of database.
(2) ASM diskgroup models & metadata - with the MD_BACKUP of ASMCMD command.

Now, MD_BACKUP will create a backup as your specified location file and this file will includes all models and metadata of the diskgroup. Benefits of taking diskgroup metadata are, if we lost the diskgroup, so we do not worry some details configuration command MD_RESTORE use to recreate the diskgroup with the same configuration. But remember that it does not restore the data file or any other file that was there on the diskgroup going to use RMAN to restore the missing files.

See the example:

ASMCMD > lsdg

State Type sector Rebal to Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files name of the block
EXTERN MOUNTED N 512 4096 1048576 11742 11643 0 11643 0 N ABC /.
NORMAL CLIMB N 512 4096 1048576 15656 10661 1259 4701 0 N DATA.
EXTERN MOUNTED N 512 4096 1048576 15656 13874 0 13874 0 N FRA.
ASMCMD >
>

ASMCMD >/home/grid/data_backup_file - G DATA md_backup
Group of disk to save metadata: DATA
Path to current directory alias: cluster01
Path to current directory alias: ORCL
Path to current directory alias: ORCL/fichier_parametres
Path to current directory alias: ORCL/DATA file
Current directory alias path: cluster01/OCRFILE
Path to current directory alias: ORCL/CONTROLFILE
Path to current directory alias: ORCL/TEMPFILE
Path to current directory alias: ORCL/ONLINELOG
Current directory alias path: cluster01/ASMPARAMETERFILE
ASMCMD >

* vim # / home/grid/data_backup_file *.

@diskgroup_set =)
{
"ATTRINFO"-ONLINE {}
"MODEL. OCRBACKUP. REDUNDANCY '-ONLINE 18',
"MODEL. FICHIER_PARAMETRES. MIRROR_REGION '-ONLINE '0',
"MODEL. TEMPORARY FILE. REDUNDANCY '-ONLINE 18',
"MODEL. TEMPORARY FILE. MIRROR_REGION '-ONLINE '0',
"MODEL. FICHIER_PARAMETRES. REDUNDANCY '-ONLINE 18',
"SECTOR_SIZE"-ONLINE '512',
"MODEL. DATAGUARDCONFIG. REDUNDANCY '-ONLINE 18',
' ACCESS_CONTROL. UMASK '-ONLINE '066'.
"MODEL. ASM_STALE. STRIPE '-ONLINE '0',
"MODEL. ARCHIVELOG. STRIPE '-ONLINE '0',
"MODEL. DATAGUARDCONFIG. PRIMARY_REGION '-ONLINE '0',
"MODEL. OCRBACKUP. STRIPE '-ONLINE '0',
"MODEL. DATA FILE. STRIPE '-ONLINE '0',
"AU_SIZE"-ONLINE '1048576',
"MODEL. ASMPARAMETERFILE. STRIPE '-ONLINE '0',
"MODEL. TRACK CHANGES. PRIMARY_REGION '-ONLINE '0',
"MODEL. CONTROLFILE. REDUNDANCY '-ONLINE 19',
"MODEL. FLASHFILE. STRIPE '-ONLINE '0',
"MODEL. BACKUPSET. PRIMARY_REGION '-ONLINE '0',
"MODEL. ARCHIVELOG. PRIMARY_REGION '-ONLINE '0',
"MODEL. TRACK CHANGES. STRIPE '-ONLINE '0',
"MODEL. ONLINELOG. PRIMARY_REGION '-ONLINE '0',
"MODEL. TRACK CHANGES. REDUNDANCY '-ONLINE 18',
"MODEL. BACKUPSET. STRIPE '-ONLINE '0',
"MODEL. OCRFILE. MIRROR_REGION '-ONLINE '0',
"DISK_REPAIR_TIME' => '3.6 h."
"MODEL. AUTOBACKUP. REDUNDANCY '-ONLINE 18',
"MODEL. DUMPSET. REDUNDANCY '-ONLINE 18',
"MODEL. RETURN OF FLAME. MIRROR_REGION '-ONLINE '0',
"MODEL. DUMPSET. MIRROR_REGION '-ONLINE '0',
"MODEL. DUMPSET. PRIMARY_REGION '-ONLINE '0',
"MODEL. ASM_STALE. REDUNDANCY '-ONLINE 19',
"MODEL. RETURN OF FLAME. PRIMARY_REGION '-ONLINE '0',
"MODEL. CONTROLFILE. STRIPE '-ONLINE 1',
"MODEL. DATA FILE. REDUNDANCY '-ONLINE 18',
"MODEL. XTRANSPORT. REDUNDANCY '-ONLINE 18',
"MODEL. AUTOBACKUP. PRIMARY_REGION '-ONLINE '0',
"MODEL. CONTROLFILE. MIRROR_REGION '-ONLINE '0',
"MODEL. DATA FILE. PRIMARY_REGION '-ONLINE '0',
"MODEL. ASMPARAMETERFILE. REDUNDANCY '-ONLINE 18',
"MODEL. FLASHFILE. MIRROR_REGION '-ONLINE '0',
"MODEL. ASM_STALE. MIRROR_REGION '-ONLINE '0',
"MODEL. RETURN OF FLAME. REDUNDANCY '-ONLINE 18',
"MODEL. DATAGUARDCONFIG. STRIPE '-ONLINE '0',
"CELL. SMART_SCAN_CAPABLE'-ONLINE 'FALSE. '
"TEMPLATE_VERSION"-ONLINE '186646528',
"MODEL. FICHIER_PARAMETRES. STRIPE '-ONLINE '0',
"MODEL. DATA FILE. MIRROR_REGION '-ONLINE '0',
"MODEL. FICHIER_PARAMETRES. PRIMARY_REGION '-ONLINE '0',
"MODEL. BACKUPSET. MIRROR_REGION '-ONLINE '0',
"MODEL. OCRBACKUP. MIRROR_REGION '-ONLINE '0',
"MODEL. ONLINELOG. REDUNDANCY '-ONLINE 18',
"MODEL. ASMPARAMETERBAKFILE. STRIPE '-ONLINE '0',
' ACCESS_CONTROL. PERMIT TO '-ONLINE 'FALSE. '
"MODEL. DATAGUARDCONFIG. MIRROR_REGION '-ONLINE '0',
"MODEL. TEMPORARY FILE. PRIMARY_REGION '-ONLINE '0',
"COMPATIBLE. RDBMS '-ONLINE '10.1.0.0.0'.
"MODEL. FLASHFILE. PRIMARY_REGION '-ONLINE '0',
"MODEL. ONLINELOG. MIRROR_REGION '-ONLINE '0',
"MODEL. FLASHFILE. REDUNDANCY '-ONLINE 18',
"MODEL. OCRBACKUP. PRIMARY_REGION '-ONLINE '0',
"MODEL. OCRFILE. STRIPE '-ONLINE '0',
"MODEL. AUTOBACKUP. MIRROR_REGION '-ONLINE '0',
"MODEL. ASM_STALE. PRIMARY_REGION '-ONLINE '0',
"MODEL. ASMPARAMETERBAKFILE. PRIMARY_REGION '-ONLINE '0',
"MODEL. XTRANSPORT. PRIMARY_REGION '-ONLINE '0',
"MODEL. DUMPSET. STRIPE '-ONLINE '0',
"MODEL. TEMPORARY FILE. STRIPE '-ONLINE '0',
"MODEL. OCRFILE. PRIMARY_REGION '-ONLINE '0',
"MODEL. ONLINELOG. STRIPE '-ONLINE '0',
"MODEL. ARCHIVELOG. REDUNDANCY '-ONLINE 18',
"MODEL. OCRFILE. REDUNDANCY '-ONLINE 18',
"MODEL. ARCHIVELOG. MIRROR_REGION '-ONLINE '0',
"MODEL. ASMPARAMETERFILE. MIRROR_REGION '-ONLINE '0',
"MODEL. RETURN OF FLAME. STRIPE '-ONLINE '0',
"MODEL. CONTROLFILE. PRIMARY_REGION '-ONLINE '0',
"MODEL. XTRANSPORT. MIRROR_REGION '-ONLINE '0',
"MODEL. BACKUPSET. REDUNDANCY '-ONLINE 18',
"MODEL. ASMPARAMETERBAKFILE. REDUNDANCY '-ONLINE 18',
"MODEL. XTRANSPORT. STRIPE '-ONLINE '0',
"MODEL. TRACK CHANGES. MIRROR_REGION '-ONLINE '0',
"COMPATIBLE. ASM '-ONLINE '11.2.0.0.0'.
"MODEL. ASMPARAMETERBAKFILE. MIRROR_REGION '-ONLINE '0',
"MODEL. ASMPARAMETERFILE. PRIMARY_REGION '-ONLINE '0',
"MODEL. AUTOBACKUP. STRIPE'-'0' ONLINE
},
"DISKSINFO"-ONLINE {}
"ASMDISK02"-ONLINE {}
"ASMDISK02"-ONLINE {}
"TOTAL_MB"-ONLINE '3914',
"FAILGROUP" => "ASMDISK02."
"NAME" => "ASMDISK02."
"DGNAME"-ONLINE "DATA."
'PATH' => 'ORCL:ASMDISK02 '.
}
},
"ASMDISK01"-ONLINE {}
"ASMDISK01"-ONLINE {}
"TOTAL_MB"-ONLINE '3914',
"FAILGROUP" => "ASMDISK01."
"NAME" => "ASMDISK01."
"DGNAME"-ONLINE "DATA."
'PATH' => 'ORCL:ASMDISK01 '.
}
},
"ASMDISK04"-ONLINE {}
"ASMDISK04"-ONLINE {}
"TOTAL_MB"-ONLINE '3914',
"FAILGROUP" => "ASMDISK04."
"NAME" => "ASMDISK04."
"DGNAME"-ONLINE "DATA."
'PATH' => 'ORCL:ASMDISK04 '.
}
},
"ASMDISK03"-ONLINE {}
"ASMDISK03"-ONLINE {}
"TOTAL_MB"-ONLINE '3914',
"FAILGROUP" => "ASMDISK03."
"NAME" => "ASMDISK03."
"DGNAME"-ONLINE "DATA."
'PATH' => 'ORCL:ASMDISK03 '.
}
}
},
"DGINFO"-ONLINE {}
"DGTORESTORE"-ONLINE 0
"DGCOMPAT"-ONLINE ' 11.2.0.0.0. "
"DGNAME"-ONLINE "DATA."
"DGDBCOMPAT"-ONLINE ' 10.1.0.0.0. "
"DGTYPE"-ONLINE "NORMAL."
"DGAUSZ"-ONLINE '1048576'
},
"ALIASINFO"-ONLINE {}
'6' => {
"DGNAME"-ONLINE "DATA."
'LEVEL'-ONLINE 1
"ALIASNAME"-online "cluster01/ASMPARAMETERFILE"
'REFERENCE_INDEX'-'16777322' ONLINE
},
'3' => {
"DGNAME"-ONLINE "DATA."
'LEVEL'-ONLINE 1
"ALIASNAME" => "ORCL/CONTROLFILE.
'REFERENCE_INDEX'-'16777534' ONLINE
},
'7' => {
"DGNAME"-ONLINE "DATA."
'LEVEL'-ONLINE 1
"ALIASNAME" => "ORCL/FICHIER_PARAMETRES,"
'REFERENCE_INDEX'-'16777693' ONLINE
},
'2' => {
"DGNAME"-ONLINE "DATA."
'LEVEL'-ONLINE 1
"ALIASNAME" => "ORCL/ONLINELOG,"
'REFERENCE_INDEX'-'16777587' ONLINE
},
'8' => {
"DGNAME"-ONLINE "DATA."
'LEVEL'-ONLINE 1
"ALIASNAME"-online "cluster01/OCRFILE"
'REFERENCE_INDEX'-'16777375' ONLINE
},
'1' => {
"DGNAME"-ONLINE "DATA."
'LEVEL'-ONLINE 0
"ALIASNAME"-online "cluster01."
'REFERENCE_INDEX'-'16777269' ONLINE
},
'4' => {
"DGNAME"-ONLINE "DATA."
'LEVEL'-ONLINE 1
"ALIASNAME" => ORCL/DATA FILE"."
'REFERENCE_INDEX'-'16777481' ONLINE
},
'0' => {
"DGNAME"-ONLINE "DATA."
'LEVEL'-ONLINE 0
"ALIASNAME" => "ORCL".
'REFERENCE_INDEX'-'16777428' ONLINE
},
'5' => {
"DGNAME"-ONLINE "DATA."
'LEVEL'-ONLINE 1
"ALIASNAME" => "ORCL/TEMPFILE"
'REFERENCE_INDEX'-'16777640' ONLINE
}
},
'TEMPLATEINFO'-ONLINE {}
'11' => {}
"DGNAME"-ONLINE "DATA."
"STRIPE"-ONLINE 'ROUGH. "
'TEMPNAME' => 'AUTOBACKUP.
"REDUNDANCY"-ONLINE "MIRROR."
'SYSTEM' => 'Y '.
},
'7' => {
"DGNAME"-ONLINE "DATA."
"STRIPE"-ONLINE 'ROUGH. "
"TEMPNAME' => 'ASMPARAMETERFILE."
"REDUNDANCY"-ONLINE "MIRROR."
'SYSTEM' => 'Y '.
},
'2' => {
"DGNAME"-ONLINE "DATA."
"STRIPE"-ONLINE 'ROUGH. "
"TEMPNAME' => 'ARCHIVELOG."
"REDUNDANCY"-ONLINE "MIRROR."
'SYSTEM' => 'Y '.
},
'17' => {}
"DGNAME"-ONLINE "DATA."
"STRIPE"-ONLINE 'ROUGH. "
"TEMPNAME' => 'OCRBACKUP."
"REDUNDANCY"-ONLINE "MIRROR."
'SYSTEM' => 'Y '.
},
'1' => {
"DGNAME"-ONLINE "DATA."
"STRIPE"-ONLINE 'ROUGH. "
"TEMPNAME' => 'ASM_STALE."
"REDUNDANCY"-ONLINE "HIGH."
'SYSTEM' => 'Y '.
},
'18' => {}
"DGNAME"-ONLINE "DATA."
"STRIPE"-ONLINE 'ROUGH. "
"TEMPNAME' => 'ONLINELOG."
"REDUNDANCY"-ONLINE "MIRROR."
'SYSTEM' => 'Y '.
},
'0' => {
"DGNAME"-ONLINE "DATA."
"STRIPE"-ONLINE 'ROUGH. "
'TEMPNAME' => 'DATAFILE ',.
"REDUNDANCY"-ONLINE "MIRROR."
'SYSTEM' => 'Y '.
},
'16' => {}
"DGNAME"-ONLINE "DATA."
"STRIPE"-ONLINE 'ROUGH. "
"TEMPNAME' => 'OCRFILE."
"REDUNDANCY"-ONLINE "MIRROR."
'SYSTEM' => 'Y '.
},
'13' => {}
"DGNAME"-ONLINE "DATA."
"STRIPE"-ONLINE 'ROUGH. "
"TEMPNAME'-ONLINE"TRACK CHANGES. "
"REDUNDANCY"-ONLINE "MIRROR."
'SYSTEM' => 'Y '.
},
'6' => {
"DGNAME"-ONLINE "DATA."
"STRIPE"-ONLINE 'ROUGH. "
"TEMPNAME' => 'ASMPARAMETERBAKFILE."
"REDUNDANCY"-ONLINE "MIRROR."
'SYSTEM' => 'Y '.
},
'3' => {
"DGNAME"-ONLINE "DATA."
"STRIPE"-ONLINE 'ROUGH. "
"TEMPNAME' => 'FLASHFILE."
"REDUNDANCY"-ONLINE "MIRROR."
'SYSTEM' => 'Y '.
},
'9' => {
"DGNAME"-ONLINE "DATA."
"STRIPE"-ONLINE 'ROUGH. "
"TEMPNAME" => "TEMPFILE"
"REDUNDANCY"-ONLINE "MIRROR."
'SYSTEM' => 'Y '.
},
'12' => {}
"DGNAME"-ONLINE "DATA."
"STRIPE"-ONLINE 'ROUGH. "
"TEMPNAME' => 'XTRANSPORT."
"REDUNDANCY"-ONLINE "MIRROR."
'SYSTEM' => 'Y '.
},
'14' => {}
"DGNAME"-ONLINE "DATA."
"STRIPE"-ONLINE 'ROUGH. "
"TEMPNAME'-ONLINE"FLASHBACK. "
"REDUNDANCY"-ONLINE "MIRROR."
'SYSTEM' => 'Y '.
},
'15' => {}
"DGNAME"-ONLINE "DATA."
"STRIPE"-ONLINE 'ROUGH. "
"TEMPNAME' => 'DATAGUARDCONFIG."
"REDUNDANCY"-ONLINE "MIRROR."
'SYSTEM' => 'Y '.
},
'8' => {
"DGNAME"-ONLINE "DATA."
"STRIPE"-ONLINE 'ROUGH. "
"TEMPNAME' => 'FICHIER_PARAMETRES."
"REDUNDANCY"-ONLINE "MIRROR."
'SYSTEM' => 'Y '.
},
'4' => {
"DGNAME"-ONLINE "DATA."
"STRIPE"-ONLINE "FINE."
'TEMPNAME' => 'CONTROLFILE.
"REDUNDANCY"-ONLINE "HIGH."
'SYSTEM' => 'Y '.
},
'10' => {}
"DGNAME"-ONLINE "DATA."
"STRIPE"-ONLINE 'ROUGH. "
"TEMPNAME' => 'BACKUPSET."
"REDUNDANCY"-ONLINE "MIRROR."
'SYSTEM' => 'Y '.
},
'5' => {
"DGNAME"-ONLINE "DATA."
"STRIPE"-ONLINE 'ROUGH. "
"TEMPNAME' => 'DUMPSET."
"REDUNDANCY"-ONLINE "MIRROR."
'SYSTEM' => 'Y '.
}
}
}
);

NOTE:

To re-create the diskgroup dropped with the same restoration of the configuration of the diskgroup even with the aid of diskgroup as:

asmcmd >/home/grid/data_backup_file - full - G DATA md_restore

Hope its clear now.

Thank you

Ashish Shukla

ASM Diskgroup existing disks
Hello
Oracle RDBMS version 11.2.0.3.0
OS: OEL 6.3
Stand-alone server of the grid Infrastructure.
MY question: I want to connect existing disks to ASM instance. What commands to create new disks existing diskgroup using without erasing the data on disks?
Hello
My recommendation is to create the ASM using ASCMA instance.

Because the step below is valid only up to 11.1 or less, for 11.2 is missing a few extra steps.

Now the steps for manual creation of DSO;

1. create the file password for manually creating an ASM instance.
orapwd file = $ORACLE_HOME/dbs/orapw + ASM Password123 = 5 entries = password

In this way the user ASMSNMP will not be created and you must manually assigns a role SYSASM to the SYS user. ASMCA do automatically.

2. create the needed directories:

mkdir Pei $ORACLE_BASE/admin / + ASM
CD $ORACLE_BASE/admin / + ASM
mkdir bdump
mkdir udump
mkdir cdump
mkdir pfile

These directories are obsolete on 11.2, now Oracle use ADR to store logs.

3. create the file init + ASM.ora under the $ORACLE_HOME/dbs:

asm_diskgroups = 'DATA', 'FRA '.
asm_diskstring = "/ dev/oracleasm/discs / *'"
background_dump_dest ='/ u01/app/admin / + ASM/bdump "
core_dump_dest ='/ u01/app/admin / + ASM/cdump '
instance_type = "asm".
LARGE_POOL_SIZE = 12 M
user_dump_dest ='/ u01/app/admin / + ASM/udump '

ASMCA value target memory at least 272 M

4 - export ORACLE_SID = + ASM
Instance ASM 5-start in editing mode:

sqlplus / as sysasm
Create spfile from pfile;
Startup mount
Show disc setting

6 - Mount starts;

change fra diskgroup Steed;
change the data diskgroup medium;

Missing a few steps here.

ASMCA will activate/configure "ora.asm" (by adding the SPFILE and some PARAMETERS on OLR) resources and all dependent resources and create DISKGROUP resources.
If you do not have config, ASM will be not started/stoped/restarted automatically.

Once again... Is recommended to create an ASM Instance using ASMCA and a SMALL Lun (1 GB) to store only the ASM SPFILE when creating and then just get the other DISKGROUP.

When you activate your database or add the DISKGROUP resources on Oracle Restart, and ASM must exist to work properly
Published by: Levi Pereira April 11, 2013 13:31

RMAN Active cloning succeeded, but spfile turned out to be missing
Environment:

OS Version: HP - UX B.11.31 U ia64

Oracle DB Version: 11.2.0.3.0
Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

The files of the databases on: + managed ASM starts

RMAN Active cloning command below is used to clone the database from one 'A' host to another host 'B '.
```
 duplicate target database to testDB from active database nofilenamecheck ; 
```
Cloning completed successfully. But when I checked on the existence of spfile the missing found spfile.
```
SQL> show parameter spfile

NAME                                 TYPE        VALUE
spfile                               string      /app/oracle/product/11.2.0.3/db/dbs/spfiletestDB.ora
```
What could be the cause of the missing spfile?

I have been informed below as a workaround.

1. create the spfile and pfile memory and bounce the db for this problem.
2 RMAN Active clone script specified with the clause pfile.
For example.
```
 duplicate target database to testDB  from active database file=/app/oracle/product/11.2.0.3/db/dbs/inittestDB.ora;  
```
Would appreciate the counsel on this.

Published by: Sivaprasad S January 31, 2013 17:13
Hello;

What could be the cause of the missing spfile?

This:
```
duplicate target database to testDB from active database nofilenamecheck
```
Instead:
```
duplicate target database to testDB from active database spfile nofilenamecheck
```
See:

http://docs.Oracle.com/CD/B28359_01/backup.111/b28270/rcmdupdb.htm

Example 23-3

Remember to close some of your old questions

Best regards

mseberg

urgent asm does not start with ora 1031. !!!
Hi guys,.
Stuck with a problem who are unsure how to proceed... cluster services doesnot comeup... tried to watch using crsctl start - n node cluster gives me error... below I'm missing something here... Can someone help me please on this...

[node + ASM1:root] crsctl start - n node of cluster
CRS-2672: attempt to start 'ora.asm' on 'node '.
ORA-01031: insufficient privileges
CRS-5017: the action "ora.asm start" resource has met the following error:
ORA-01031: insufficient privileges
. For details, refer to "(:CLSN00107:))" "in ' / u01/app/11.2.0.3/grid/log/node/agent/ohasd/oraagent_grid/oraagent_grid.log '.
CRS-2674: beginning of 'ora.asm', the 'node' failed
CRS-2679: attempt to clean the 'ora.asm' on 'node '.
ORA-01031: insufficient privileges
CRS-2681: clean 'ora.asm' on 'node' successful
CRS-4705: beginning of the Clusterware failed on the node.
CRS-4000: Start command has failed, or completed with errors.

crsctl check crs shows me the following...

CRS-4638: Oracle high availability Services is online
CRS-4535: cannot communicate with Cluster Ready Services
CRS-4529: Cluster Synchronization Services is online
CRS-4534: can not communicate with the event Manager

tried from asm manually... but not sufficient privileges said...

[node: + ASM1:grid] echo $ORACLE_HOME
/U01/app/11.2.0.3/grid
[node: + ASM1:grid] echo $ORACLE_SID
+ ASM1

[node: + ASM1:grid] sqlplus "virtue sysdba".

SQL * more: Production of liberation 11.2.0.3.0 sam 8 15:21:21 dec 2012

Copyright (c) 1982, 2011, Oracle. All rights reserved.

Connect to an instance is idle.

SQL > startup
ORA-01031: insufficient privileges

Grid has the following privileges

[node: + ASM1:grid] id
UID = 501 (Grid) gid = 501 (oinstall) groups = 501 (oinstall), 502 (dba), 504 (asmadmin), 506 (asmdba), 507 (asmoper)

ID [node: ipdexdev1:oracle]
UID = 502 (Oracle) gid = 501 (oinstall) groups = 10 (wheel), 501 (oinstall), 502 (dba), 506 (asmdba)

The other node works very well... against the privileges that they are the same on the other node too...
sys / ACE sysasm

then start

Disgroup unable to mount ASM (disk error exist not at all)
one of our RAC system have ill of ASM.

ASM guest 3,4,5 disc error is missing, while we, that there is only the configured disk 1,2,3 for FLIGHT 1,2,3
on the two nodes of the RAC

1. How can we be sure where Disc 3,4,5 is?
2. how to get rid of this non - exist disks?

Thank you all for the replies and advice

BR/ricky

alter diskgroup asm_sai mount

*

ERROR on line 1:

ORA-15032: not all changes made

ORA-15040: diskgroup is incomplete

ORA-15042: ASM '5' disc is missing

ORA-15042: ASM disk '4' is missing

ORA-15042: ASM disk '3' is missing

/etc/init.d/oracleasm listdisks

VOL1

VOL2

VOL3

Device "/ dev/emcpowere1 ' is marked an ASM disk with the label"VOL1 '.

Device "/ dev/emcpowerf" is not marked as a disc of the ASM

Device "/ dev/emcpowerf1 ' is marked with an ASM disk with the label"VOL2 ".

Device "/ dev/emcpowerg" is not marked as a disc of the ASM

Device "/ dev/emcpowerg1 ' is marked with an ASM disk with the label «VOL3»

Select GROUP_NUMBER, NAME, STATE, TYPE of v$ asm_diskgroup;

GROUP_NUMBER STATE TYPE NAME

------------ ------------------------------ ----------- ------

0 REMOVED ASM_SAI

Select GROUP_NUMBER, DISK_NUMBER, MOUNT_STATUS, State, NAME, path of v$ asm_disk;

GROUP_NUMBER DISK_NUMBER MOUNT_S STATE NAME

------------ ----------- ------- -------- ------------------------------

PATH

--------------------------------------------------------------------------------

0 NORMAL 0 CLOSED

ORCL:VOL1

0 2 CLOSED NORMAL

ORCL:VOL3

0 1 CLOSED NORMAL

ORCL:VOL2
What version of Oracle and what operating system are you using?

74	No. +DATA_EXA/prep/onlinelog/group_74.972.875418965 day BEFORE
74	No. +RECO_EXA/prep/onlinelog/group_74.14330.875418971 day BEFORE

Missing ASMS

Similar Questions

Maybe you are looking for