Missing drivers on Pavilion DV6 with Windows 7 Pro 64

I have a few missing drivers for 3 devices of system of Base (BSD) and 1 unknown device. Here is the hardware ID:

BSD 1-

PCI\VEN_197B & DEV_2382 & SUBSYS_3603103C & REV_00

PCI\VEN_197B & DEV_2382 & SUBSYS_3603103C

PCI\VEN_197B & DEV_2382 & CC_088000

PCI\VEN_197B & DEV_2382 & CC_0880

BSD 2-

PCI\VEN_197B & DEV_2383 & SUBSYS_3603103C & REV_00

PCI\VEN_197B & DEV_2383 & SUBSYS_3603103C

PCI\VEN_197B & DEV_2383 & CC_088000

PCI\VEN_197B & DEV_2383 & CC_0880

BSD 3-

PCI\VEN_197B & DEV_2384 & SUBSYS_3603103C & REV_00

PCI\VEN_197B & DEV_2384 & SUBSYS_3603103C

PCI\VEN_197B & DEV_2384 & CC_088000

PCI\VEN_197B & DEV_2384 & CC_0880

I just noticed that the only difference in these identifiers is 2382 and 2383 2384

The ID of the unknown device are-

ACPI\ENE0100

* ENE0100

Any help to identify missing drivers would be very much appreciated.

Thank you.

Thanks again Paul. I went to the HP support site and put in my correct as model number you suggested and found MORE than just the drivers I need. I was able to match the drivers I need really to the material I did.

Thanks again. Now, everything is good.

All the best.

Tags: Notebooks

Similar Questions

  • HP Pavilion dv6 with Windows 7 - updated 2011 Atheros Wireless LAN Driver

    Hello

    Yesterday my HP Support Assistant marked me on two updates for my system.

    Updates/Messages:

    Atheros Wireless Lan Driver 2011

    This package contains drivers for the Atheros Wireless LAN adapters supported in the...

    SoftPaq number: SP52131 Version: 9.20Ap4 size: 81,94 MB

    Atheros Wireless LAN Driver - Win 7 

    This package provides the driver for Atheros WLAN Devices

    SoftPaq number: SP48755 Version: 1.00Ep1 size: 20,91 MB

    I tried to download both without success.   Have I not the right drivers?

    Here are my details of computers...

    Product name: HP Pavilion dv6 Notebook PC - Windows 7

    Serial number: [edited by Moderator serial number]

    Thank you

    Robyn

    Hello:

    It would be the last card for your PC's Atheros wireless driver...

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?lang=en&cc=us&sp4ts.Oid=5060882&swItem=ob_108905_1

  • Are drivers Conexant Sound Compatible with Windows 8 PRO?

    I made an installation on-site of Windows 8 Pro on my laptop HP G60-549dx.  After you install any noise (Conexant).  Driver latetest installed and when outages available.  A clean install would cure the problem or Conexant Sound is not compatible.  Thank you

    don't know if you have already done the clean install, but was your time! Was there made, unsuccessfully, same... only microsoft or hp computer can solve this problem.

  • HP Pavilion dv6 with Windows 7 - HP BIOS update

    Good afternoon

    When I run the HP Support Assistant, under the button "updated and of the developed"; the tab "actions".  He tells me to update my BIOS.

    I select and menu drop down it states the following:

    • SoftPaq = SP61028
    • Version = F.29

    I select the download button and it does the new window and follow the download process.  When complete I chose to "restart" as requested.  Go through the necessary process.  Back on the desktop.

    If I open the HP Support Assistant and look under the same as in the first sentence.  He told me that I should update the BIOS and is the the same thing again.

    I tried 3 times to update my BIOS.  Is there a problem with the download?

    Seems to me having 'weird' things going on with my laptop the past few weeks.  Hard to explain but I post something earlier on the Interactive Services detection window popping up.  Also my Mozilla Firefox keep gel (not answer) as well as a few other software.   I ran tune-up and make sure that I defragment on a weekly basis; seems to help.  I use ESET NOD32 Antivirus and it to update as it supposed to.

    Any suggestions?

    Help

    Robyn

    Hello again LuvGSPointers.

    It turns out that SP61028 is the latest BIOS for your laptop.  However, you go ahead and try to download it directly from HP support site and install it.  Here is a direct link.

    I also suggest that you uninstall and reinstall HP Support Assistant.  Here is a link to the latest version of HP Support Assistant.

    Nice day.  I'll keep an eye out for your next reply.

  • HP Pavilion dv6 with Windows 7 - Interactive Services detection

    Hello

    I get the following window poping up on my laptop...

    Detection of Interactive Services:

    A program that is running on this computer tries to display a message.

    The program might know form, you or your permission to perform a task.
    (with the following options of your choice)

    • Display the message
    • Ask me later

    If I see it, it goes to a white screen with two windows.  One is a runtime error (program:C:\windows\system32\spoolsv.exe) and other States something about the return to the previous screen.  Choose this option and it goes immediately to my office.  If I choose to ask me later, he returned to my office.  Anyway the window keep poping up.

    I don't understand what it is or what to do about it.  But when the window appears the icon that appears in my toolbar has a picture of a camera and printer in it.  This connected to my printer?  Even if my connection to my wireless printer seems to be running.

    Help

    Robyn

    Try disabling hardware acceleration in Firefox.

    This thread in detail how to disable hardware acceleration.

  • Problems with HP Simplepass 2011 - HP Pavilion dv6 Notebook Windows 7 64 bit

    HP Pavilion dv6 Notebook Windows 7 64 bit

    I have this laptop about two years. I had have to rely on the factory affecting several times on circumstances independent-(donjon de Norton Utilities supprimant les registres essentiels). But, recently, I restored to factory setting and updated my Norton Internet Security to the latest version and everything was fine until my fingersensor stop Saw several hours after. He reads is no longer my fingerprint.  I am prompted by the software to enter my password by typing only and not in the typing and scanning. Right now my quick launch is based on numbers from 0 to 9. Can someone guide me to recover my software working properly?

    You can try to uninstall the driver and the software for Simplepass, then re - install, refer to this guide

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and/HP-SimplePass-identity-protection-validity-fingerprint-and/m-p/742013

  • HP Pavilion dv6 3060em: HP Pavilion dv6 3060em Windows XP

    Hello! I can't find drivers for my laptop HP Pavilion dv6 3060em with Windows XP Pro. Help, please.

    Hello

    Thanks for posting in the Forum from HP Support.

    Here is the official site to download the drivers for your model-> http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us & lc = in & product = 4226935

    Your computer supports only Windows 7. It is the operating system that is supported.

    In fact, Windows 7 is a good choice considering this support of Win 7 Pro/Ultimate/Enterprise virtual XP, called XP Mode. Learn more about it here:

    http://Windows.Microsoft.com/en-us/Windows7/install-and-use-Windows-XP-mode-in-Windows-7

    http://www.howtogeek.com/HOWTO/10911/run-XP-mode-on-Windows-7-machines-without-hardware-virtualization/

    Please, let me know if you need help!

  • laptop HP pavilion g6, with Windows 7 home basic 64-bit

    In 2012, I bought a pc hp laptop pavilion g6, with Windows 7 home basic 64-bit in Saudi Arabia. I found 2 months that I did after I bought it reinstall drive does not work please help me

    Hello

    Here are a few options.

    1. you can order a set of replacement of the recovery media using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

    Order HP recovery disks.

    2 you can use the following method to create your own family Windows 7 Edition installation disk basic 64-bit.

    Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

    An example of a COA label can be seen here.

    You can create a Windows 7 installation disc yourself using another PC. However, it not there no download directly available for Windows 7 Home Basic Edition, so you'll need to download another version (one will do, but the link below is for Windows 7 Home Premium 64-bit - the source is Digital River).

    Windows 7 Home Premium SP1 64-bit

    For the key on your label of COA to work, you must now use the method described in the following link to convert this ISO to an all-version Installer.

    http://www.SevenForums.com/tutorials/85813-Windows-7-universal-installation-disc-create.html

    Once that is done, use an application like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.

    Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

    http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

    You may need for your laptop, software and additional pilots are in entering either the complete model number or product of your g6 series no here.

    Best regards

    DP - K

  • Pavilion Notebook with windows 8.1: burning problem of the photos on a CD

    On my old computer, it was easy to burn photos to a CD - R. I tried to do it on the Pavilion laptop with windows 8.1 but without success. Try with the office, the message says "windows can't burn to the current disc. Please insert a writable disc in driver E. " But I've been using a disc that worked on the old computer. When I tried it through Media Player, it didn't just start burning once I inserted the disc and no progress has been demonstrated. When I checked the properties of the E drive it showed there's nothing on the disc.

    Hi MMM55,

    If she did not work with Cyberlink so let's try another method. It is possible to burn without using software as if you were in the first place. I've included some tutorials and I think choose USB option is what caused this problem for you. Here's a YouTube video on how to burn a CD and the same thing but in steps written here.

    Thank you

  • where I can find drivers for Pavilion dv6-7055er enemy: bcm20702a0, simple communication controller pci

    where I can find drivers for Pavilion dv6-7055er enemy:

    bcm20702a0

    simple communication controller PCI

    Please download and install the driver Intel Management Engine Interface (MEI) from the following link:

    http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56158.exe

  • can someone help me with the link to download hp2050 print drivers that are compatible with windows 8.

    can someone help me with the link to download hp2050 print drivers that are compatible with windows 8, my software CD is not compatible with windows 8, and I can't use the printer now.

    Hello

    The installation program "Full Feature" can be found on the following link.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109407-2&cc=us&DLC=en&LC=en&OS=4132&product=4027469&sw_lang=

    Kind regards

    DP - K

  • DC 7900 SFF: Missing driver for DC 7900 SFF Windows XP pro SP3

    Hello

    I already read this post: http://h30499.www3.hp.com/t5/Business-PCs-Compaq-Elite-Pro/DC7900-SFF-Drivers-for-XP-Professional/td...

    But unfortunately it does not solve my problem with a driver missing on the relocation of a Windows XP Pro SP3 with the DC 7900 SFF.

    The missing pilot is linked to:

    PCI \VEN_8086&DEV_ 3 A 02 & SUBSYS_3034103C & REV_02

    Everything else seems fine.

    If someone could give me some information or links to the correct drivers, would be great

    (already tried most of the available drivers on the HP site for this model)

    Thank you!

    Hello:

    This hardware ID decodes the Intel ICH10D / DO SATA AHCI Controller.

    The chipset installation utility should be installing this product...

    https://Downloadcenter.Intel.com/download/20019/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets

  • TS 130 with Windows 8 Pro OEM version

    Intend to buy 130 TS and would like to know if I could use it as an office
    PC with Windows 8 PRO OEM builder version of the product?

    Thank you!

    Hello and welcome back!

    It should work. Windows 8 is compatible / certified on the TS130 platform means that Lenovo provides drivers, firmware, etc. for this OS and is supported.

  • Using a HP DC7900 with Windows XP Pro 64 bit, looking for the audio driver.

    Using a HP DC7900 with Windows XP Pro 64 bit, which does not support the HP.  I found all the drivers except the audio driver.  It's a HD audio integrated with AD1884A codec.  Can someone tell me please the driver?

    HP supports evrything but XP 64 bit for this system.  I already tried the mftr chipset. What struck me everything but audio.  So I installed a card SB X - Fi I found laying around.

    Thanks for the information!

  • Installing drivers for HP M1319f on Windows 7 Pro 64 bit

    I upgraded a client to a new office of HP with Windows 7 Pro 64 bit OS. She has a HP Laserjet M1319f connected via USB. When I download and run from the driver download site on HP or download, save, and make the installation of the C drive, it gets to the point says "Adding printer drivers" and it crashes at two or four bars, so I have to kill it in the Task Manager. I tried to install it with the printer unplugged and got the same result. Windows OS printer drivers work fine.  What's up with the HP driver installation?

    Hi dpgerhardt,

    1. Open my computer
    2. Navigate to the location of C:\Program Files (x 86) \HP\HP LaserJet M1319 MFP Series\Scan To and then create a shortcut on your desktop for hppscan0.exe

Maybe you are looking for

  • plan to iCloud for multiple accounts

    I think of purchasing a plan from iCloud for my family. Between my wife and me, we have nearby a 1 terrabyte of photos.  I tried to use a personal cloud at home, but it's quickly become cumbersome the advantage, however, is that both of us can access

  • Carrying case for Portege R500?

    I'm looking for a pretty tight case, preferably not too bulky, for my Portege R500. I'll use it for travel, so it should be robust (so not something as a sleeve or whatever it is). Any ideas?

  • Find my temporary folder - NOT the Temporary Internet Files folder

    Where can I find the temporary files folder? I'm not looking for the Temporary Internet Files folder but the temporary file folder. I recently downloaded a digital purchase from a Web site on my computer. Normally, I can right click and select Save t

  • I want to connect to a network printer hp cp1518ni with different versions of windows (win7 & winxp)

    I want to connect to a network printer hp cp1518ni with different versions of windows (win7 & winxp). My pc with win 7 work ok, but the pc with win xp not 'see' the printer on the network. What is the additional driver should I install? Thank you

  • Adding photos in folders already in the catalog

    If I've already imported a folder of photos from my hard drive in Lr,and then I add or remove photos in this folder on my hard drive.These changes will be reflected in the Lr catalog?Do I need to perform a procedure of Lr to update changes inmake fol