Missing Ethernet, network controllers SM Bus and PCI device after a clean install of Windows 7 64 bit

Similar Questions

• After a clean install of Windows Vista, Intel Wifi card is installed and activated, but does not detect the network.

  Wireless card not working after a clean install of Windows Vista

  I did a clean install of Windows Vista Home Premium on my HP Pavilion of 32 bits. I've completely updated Windows via Service Pack 2. Given that the clean install, my wireless card, Intel (r) Wireless WiFi Link 4965AGN, was not able to detect all the networks. The Wifi card is listed under NICs as being installed and activated. the hardware on my laptop Wifi switch is set on "on" and the light is blue, indicating that the card is working.

  I can connect to the internet if I connect physically my computer to the modem with an ethernet cable wireless, so the modem isn't the problem. Other computers can connect to the wireless modem, so my Wifi modem functionality is not the problem. The problem with my computer.

  I tried to uninstall the Intel driver and reboot my computer with the generic driver. Install the driver generic, but my wireless card has not always worked. I then ran an update of windows, nothing helps.

  I tried to install the "Intel® PRO /? Wireless and WiFi Link"drivers for Windows Vista (32-bit 13.1.1.1 the latest version and the previous version 12.4.4.5 32-bit) for the Intel® Wireless WiFi Link 4965AGN directly from the Intel Web site at http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Wireless+Networking&ProductLine=Intel%C2%AE+WiFi+Products&ProductProduct=Intel%C2%AE+Wireless+WiFi+Link+4965AGN. The map didn't always work with a driver.

  In addition to the pilots, I also downloaded a tool of diagnosis of Intel (Intel® PROSet /?) Utility of WiFi wireless connection for Windows Vista 32 -? Bit). Said diagnostic tool the WiFi card is not installed or enabled, however, Device Manager maintains that he is also installed and active.

  Is there a problem that causes Device Manager to say that all is well with the card, but does not map to realize that they diminish the radio signals? Everything's fine, diagnostic, it just does not detect networks around him. Help, please.

  Hello

  The on/off switch actually works?

  Since it is an internal adapter to ensure it is enabled in the settings of configuration/F2 (BIOS/CMOS) often like you
  Start - so look at the screen.

  Have you tried the computer on other WiFi networks? You had a WiFi type problem before the
  Re-install of Vista?

  ---------------------------------------------------------------------------------------------------------------------

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• After a clean install of Windows 7, I can't connect to the wireless network and more problems...

  I recently did a clean install of genuine copy of Windows 7 Home Premium to clear unwanted programs all on my computer. Because the product key are disabled unexpectedly.

  The installation works fine, but after the installation. I can't connect to a wireless network, because there is no network adapter installed on the computer.

  Also, I can't set my screen resolution of 1366 x 768. Before any new install, the screen resolution sets to 1366 x 768 as native and recommended screen resolution. Now, I'm stuck at the screen resolution 1024 x 768. I need to change the graphics card so my laptop screen can support 1366 x 768? If necessary, please give me instructions on how to do this.

  Thank you.

  Acer Aspire one C5Cbb-722

  Go here, select your model, then download and install the network and video drivers.

  http://www.Acer.ca/AC/en/CA/content/drivers

• Loss of Internet and Windows features limited after a clean install of Windows 7

  Hi all

  Here's a bit of context. I had an additional Lenovo T410 sitting around, so I tried restoring it to its "factory condition" by a start-up "format". Plan was to boot from the CD drive and reinstall Windows 7 (32 bit) in the process. However, disaster, after the process complete, I'm now stuck in a kind of safe mode (everything is bigger than usual) and the computer is running several pilots. I manually installed the network card driver (can identify networking but cannot connect to the internet). Device Manager still shows device Base system, controller, Ethernet, Serial Port PCI, PCI Simple Communications Controller and unknown to be updated device drivers.

  My goals here are to 1) restore internet connectivity and 2) make all the features of Windows 7 Home Premium.

  Thank you for any input!

  * Virtual H.o.t. If you stuck with me through this whole explanation.

  Lenovo.com connect on another computer, click Help, enter your computer type and download the network drivers for your machine. Then return to the page to download the driver to your computer and download ThinkVantage System Update. Run this and it will update automatically the rest of your hardware drivers (see the post of Zoltan, above).

• Where to download drivers and utilities Toshiba after a clean install?

  My new Qosmio X 500 is very slow, that just after the start and I want to do a clean install to remove unnecessary software (Norton, MS Office Trial, some utilities Tishiba) completely, but I want to assure you that I can always find and install utilities (Protection of the HDD, fingerprint reader, etc.) I want as well as drivers for all components (Webcam, bluetooth access keys)

  These things do not come to drive more and the page "downloads" on mytoshiba point to nothing at all

  Help, please! I wanted to do today, but cannot not even call anyone, as it is Sunday here :(

  If you want to have more portable computer fast, you should not do clean OS install. Just remove all things you need and also to disable some applications to start with Windows.
  All is the OS configuration issue.

  Please note that Toshiba recovery image has been tested and all hardware components will not function properly. With your new installation of operating system, sometimes you'll have some strange problems.

• After a clean install of Windows Vista Home Premium, how long will it take to run updates and it will take a lot of bandwidth?

  updates after clean install of Vista Home premium

  I plan on upgrading the hard drive on my laptop two year old, which will require a clean install of Vista Home Edition full.  I live in a remote with the satellite internet service.  I would like to know in advance what will happen after the installation with the updates of the program.  I will ask you to install them? It would take a lot of bandwidth?

  Hi EllenCB,

  Welcome to Windows Vista community responses.

  Once you make a clean installation on your hard drive is erased. Now, when you install the operating system return updates that have been deleted will be delivered by Windows update to install on your computer. To save time and bandwidth, you can directly install Service pack 1 and Service pack 2 for Vista which would contain more updates. Of course when you run Windows update and when you try to download from the internet, your download speed will decrease. It is best to keep your system up to date which will allow your version of Windows to run better.

  Before installing the update, run the checksur tool, this tool is running an ad hoc analysis of inconsistencies that might prevent future maintenance operations. Download the tool from the link below.

  http://support.Microsoft.com/kb/947821/

  Please let us know if you need additional assistance.

  Kind regards
  Anthony
  Microsoft technical support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After a clean install of windows 7 Home premium 64-bit, dvd will play not [scrambled] and computer is crashes sometimes and I have to force the reboot.

  I have windows 7 Home premium 64-bit, which has totally collapsed.  By mistake, I installed my operating system 32-bit vista on it.  I bought a new windows 7 Home premium operating system and installed.  I did a clean install after formatting the hard drive [the did twice].  Now dvd will play not [scrambled] and computer is crashes sometimes and I have to force the reboot.  I saw the reference to System 32 on restart options.  Help?

  Original title: operating system 32 and 64 bit

  Have you installed Windows 7 device drivers for your make and model. If this is not the case, then go to the support web site factory and download Windows 7 drivers to a folder on your PC and then first install the drivers for the card mother/chipset, followed by USB, SATA, LAN, Audio and all other pilots.

  Find the website of your computer manufacturer support.
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  How do you know if you have a 32 bit or bit 6 vrsion of Windows installed:

  http://support.Microsoft.com/kb/827218

  BIOS updates: you should check to see if there was one, or sometimes several updates BIOS for the motherboard. Read (if provided) which solves the update. Sometimes a newer BIOS update will fix the problem. Read the instructions on how to your BIOS update/flash very carefully and be more you understand the process. There is a risk of a bad flash/update occurs which can make your system unbootable.

  Also check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• did a clean install of windows 7/64 bit pro on dell xps 8300 and error no driver for sm bus controller / / help

  I need sm contrller driver

  dwDUSTER,

  When you reinstalled the operating system, have you installed the software of computer system and the first chipset drivers? If this is not the case, the rest of the drivers will not install. How to download and install drivers in the correct order

  Start with the computer system software and the chipset drivers and follow the list.

  Rick

• NVIDIA nForce network controller does not work after a clean install of Windows 7 "Code 10"

  HP 6736nr

  AMD processor, nVIDIA nFORCE Network Cotnroller (I wish there were more about HW than that)

  Windows7 32 bit host

  Wireless works fine.

  For network LAN controller, Device Manager displays "Device cannot start Code 10".  not useful as nVIDIA site

  I need to find new drivers.  Following hardware ID:

  PCI\VEN_10DE & DEV_054C & SUBSYS_30CF103C & REV_A2

  PCI\VEN_10DE & DEV_054C & SUBSYS_30CF103C

  PCI\VEN_10DE & DEV_054C & CC_020000

  PCI\VEN_10DE & DEV_054C & CC_0200

  I tried to disable / enable, and uninstall and nothing works.

  Thanks in advance.

  Hello:

  Normally, the chipset nForce Vista driver install the network card.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-55781-1&CC=US&DLC=en&LC=en&os=2100&Product=3646946&sw_lang=

• Network drivers are not detected after a clean install of Windows 7

  Original title: reinstall Windows 7 ultimate

  Hi I have just reinstalled windows 7 ultimate 32 bit on my laptop and does not detect the driver from the internet. How can I fix it...?

  Hi Mosochapis,

  To provide the proper resolution, I would need more information on your side.

  1. What is the number of brand and model of the laptop?

  2 do you have wireless or wired Internet connection?

  I suggest to install more recent network driver on the manufacturer's Web site and check if it helps.

  Check out the link:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Check out the link for more information.

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Portege M750 - PCI controller is not installed on Windows 7 64 bit software

  Hi, got a SSD upgrade for my machine so decided to do a new install of Windows 7 64 bit and now I have and error indicating that the PCI controller software is not installed, I have tried windows update no. chance - to ideas please?

  Thank you, Peter

  Hi pbaker_1,

  Hmm... PCI controller could mean everything... I think you forget to install the driver for this device

  What is the device ID and the seller of it?

• New R13 - R7 - 372T: Tools missing after the clean install

  Hello!

  I got my R13 - R7 - 372T today and I want to do a clean install of Windows 10. I checked the Acer site and saw that most of the drivers are available on the download page, I also found the abApps (Portal of Acer and) download ( https://www.cloud.acer.com/ops/downloads) where I need those who one day but its seems that some of the pre-installed tools/applications are missing. How can I reinstall the following tools if I wipe my device? (I have already created a backup of the recovery partition but I need regular installation files):

  -Acer care center (edit: I found a link for verification of compatibility to download it here: http://www.acer.com/ac/en/MY/content/software-acer-care-center )

  -Acer Hover access (edit: found the link for flight stationary access here: http://go.acer.com/?id=18022#_ga=1.267060686.114307318.1458377954 but not sure of the version)

  -Dolby X 2 Audio Windows App

  -Acer Audio utility invert (makes that actually do?)

  I'm a little disappointed that Acer does not offer those by convenient download as the rest of the drivers and application of quick access for example. So where can I download those, or how I at least check out them of the recovery media that I created?

  Edit: Looks like after some experiences of most of the tools I mentioned is unnecessary (so I removed them from the list) or available by searching around for a while. However the 2 above mentioned utilities are still missing.

  Thank you!

  Alex

  Dolby

  Go to Manager of device/Audio inputs and outputs / RealTek High Definition Audio speakers / right click and uninstall.

  Go to C:/drivers/setup and install. Otherwise it

  Audio

  Realtek

  Audio driver

  6.0.1.7288

  386,0 MB

  04/11/2014

  Download

  Don't restart yet.

  Go to PCEE4/Dolby Home Theater / double click and install/reboot.

  Audio Acer utility to invert

  I don't know what it is. Nobody seems to know.

• Ethernet controller for devices drivers not install on Windows 7 (32 bit)

  Hi all

  Need a bit of help (Neo red) says

  No seriously, I'm ready VMware 7 and I converted my laptop to a VMware image running Windows 7 32 bit.

  Everything works as expected, however my ethernet (Nic) controller display Code 28. The drivers for the device are not installed.

  I installed VMware Tools and operating system selected for the image is Windows 7 32 bit. I also tried to update the drivers, however drivers are not found.

  All proposed would be appreciated.

  Please note that I printed my VMX file below.

  

  . Encoding = "windows-1252".

  config.version = '8 '.

  virtualHW.version = "7".

  memsize = "2048".

  MemAllowAutoScaleDown = "FALSE".

  displayName = "LPT - 3001.prime - uk.local.

  guestOS = "windows7"

  numvcpus = '2 '.

  Serial0.present = 'TRUE '.

  Serial0.FileType = "peripheral".

  Serial0.filename = "auto-detect".

  Serial0.AutoDetect = 'TRUE '.

  Sound.Present = 'TRUE '.

  Sound.FileName = "-1".

  Sound.AutoDetect = "TRUE".

  USB. Present = 'TRUE '.

  ethernet0. Present = 'TRUE '.

  ethernet0. AddressType = 'generated '.

  ethernet0. ConnectionType = "bridged".

  ethernet0.startConnected = 'TRUE '.

  Ethernet1. Present = 'TRUE '.

  Ethernet1. AddressType = 'generated '.

  Ethernet1. ConnectionType = "bridged".

  Ethernet1.startConnected = 'TRUE '.

  ide0:0. Present = 'TRUE '.

  ide0:0. FileName = "LPT - 3001.prime - uk.local.vmdk.

  ide0:1.present = 'TRUE '.

  ide0:1.AutoDetect = 'TRUE '.

  ide0:1.filename = "automatic detection".

  ide0:1.DeviceType = "cdrom-raw"

  MKS. Enable3D = 'TRUE '.

  vmci0. Present = 'TRUE '.

  EHCI. Present = 'TRUE '.

  annotation = «»

  pciBridge0.present = 'TRUE '.

  Tools.Upgrade.Policy = "useGlobal".

  pciBridge4.present = 'TRUE '.

  pciBridge4.virtualDev = "pcieRootPort"

  pciBridge5.present = 'TRUE '.

  pciBridge5.virtualDev = "pcieRootPort"

  pciBridge6.present = 'TRUE '.

  pciBridge6.virtualDev = "pcieRootPort"

  pciBridge7.present = 'TRUE '.

  pciBridge7.virtualDev = "pcieRootPort"

  extendedConfigFile = "LPT - 3001.prime - uk.local.vmxf.

  floppy0. FileName = "a":

  virtualHW.productCompatibility = "hosted".

  ethernet0.generatedAddress = "00: 0C: 29:26:12:9 d.

  Ethernet1.generatedAddress = "00: 0C: 29:26:12:a7.

  UUID. Location = "56 4 d 1f 86 ba a3 e8 bd - 15 34 17 36 26 12 9 d ea.

  UUID. BIOS = "56 4 d 1f 86 ba a3 e8 bd - 15 34 17 36 26 12 9 d ea.

  ide0:0. Redo = «»

  vmotion.checkpointFBSize = "134217728.

  pciBridge0.pciSlotNumber = "17".

  pciBridge4.pciSlotNumber = "21".

  pciBridge5.pciSlotNumber = "22".

  pciBridge6.pciSlotNumber = "23".

  pciBridge7.pciSlotNumber = "24".

  usb.pciSlotNumber = "32".

  ethernet0.pciSlotNumber = "33".

  Ethernet1.pciSlotNumber = "34".

  sound.pciSlotNumber = "37".

  ehci.pciSlotNumber = "38".

  vmci0.pciSlotNumber = "39".

  ethernet0.generatedAddressOffset = '0 '.

  Ethernet1.generatedAddressOffset = "10".

  vmci0.ID = "908464797".

  ethernet0.linkStatePropagation.enable = "FALSE".

  scsi0. Present = 'TRUE '.

  Ethernet1.wakeOnPcktRcv = "FALSE".

  scsi0.pciSlotNumber = "16".

  cleanShutdown = "FALSE".

  Replay.Supported = "FALSE".

  Replay.FileName = «»

  USB:1.present = 'TRUE '.

  USB:1.DeviceType = "hub".

  ethernet2. Present = "FALSE".

  ethernet3. Present = "FALSE".

  ide0:1.startConnected = 'TRUE '.

  tools.syncTime = "FALSE".

  unity.wasCapable = 'TRUE '.

  USB:0. Present = 'TRUE '.

  USB:0. DeviceType = "mouse".

  doesn't matter - just add them to the end

  ___________________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• RN v1 duo set for Time Machine and after a clean install of Yosemite I can't access my data

  Hi guys,.

  I have the ReadyNas duo v1 set for Time Machine and after a clean install of Yosemite I can't access my data.

  When I try via the Finder, files look for empty to me while info shows that they are not.

  I have no more support and I tried everything I could but all my data remains inaccessible.

  

  

  I have finally reached my backup via Time Machine, it was temporary unavailable yesterday.

  Thank you guys!

• the screen is huge, after a clean install of XP and IE crashes after opening

  Hello. I hope someone can help. I had a nasty virus my virus program has not detected in time. After that that he has been detected and deleted my computer did not work well. the virus program had deleted some files from XP to base when he got rid of the virus. I tried to repair windows with the XP cd, but my HARD drive freeze. Well I ended up getting a new HARD drive and I full format before installing windows xp. XP installed fine and I then progressed in the installation of all the drivers that came with my computer, when it was new, which was about 15 CD. Well now, I have more problems. my screen is HUGE and I am unable to change the screen meanless and IE crashes after opening. until I reinstalled windows, I took my wireless card and reinstalled after installing windows. It shows that I have a good internet connection, but it still crashes. can anyone help. my XP cd has SP2 on it.

  You want to get your computer up to date. You can get SP3 from here and there are more than 100 + updates after the SP.

  Service Pack 3: http://www.microsoft.com/en-us/download/details.aspx?id=24

  I hope this helps.