MISSING Flash.ocx - 64-bit and Windows 7 NEED HELP

Similar Questions

• Is it possible to run Windows 7 * 32-bit and Windows 7 * 64-bit on the same computer?

  I have Windows 7 * 32 bit running in my computer. But a lot of games that is built on 64-bit do not work in my system. I tried to install Windows 7 * 64 Bit on another partition of my computer. But before the start of the system using the Windows 7 installation DVD, I get an error with the oxc00000e9 status. The info says: unexpected i/o error has occurred.

  My question is whether it can run Windows 7 * 32-bit and Windows 7 * 64-bit on the same computer. If so, how to install the Windows 7 * 64-Bit? Thank you.

  Yes, you can, but you will need to have a permit for it if you plan to have both on the same computer.

  the key that can be used with 32-bit or 64-bit Windows 7 is designed to drive 1. You cannot use install both. 1 license, 1 installation, so choose wisely. If you want to install Windows 7 32 or 64 bit on another partition or another computer, you must purchase an additional license.

  INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

  Resources:

  Please see the following article with useful information about dual-boot:

  http://Windows.Microsoft.com/en-us/Windows7/can-I-have-more-than-one-operating-system-on-my-computer-multiboot

• VM with l.o. xp 32-bit and Windows 2003 are very slow

  Hi all
  expose the problem

  
  I installed esxi5.1 Server poweredge r715 ADM Opteron 6238 processor. the bios of the server is upgraded to the latest version 2.9.0

  VM with l.o. xp 32-bit and Windows 2003 are very slow and found to have 100% of the CPU.

  This problem also happens with the new machine virtual and not only moved to another computer virtual infrastructure.

  Support DELL has verified the server BIOS settings and it's ok

  Thank you

  Mr. Nelli

  This BIOS version introduces a few new States C. can you check that your power supply is set to 'Maximum Performance' and that you have disabled C1E.

• When my computor starts, the screen displays administrator profressionelle of windows xp, I don't remember the password I had used and cannot log - need help

  When my computor starts, the screen displays administrator profressionelle of windows xp, I don't remember the password I had used and cannot log - need help

  The solution is here:

  http://support.Microsoft.com/kb/321305?WA=wsignin1.0

• What is and windows 7 needs to cmmgr32.exe?

  What is and windows 7 needs to cmmgr32.exe?

  (Moved to programs)

  Hello

  Thanks for the reply.

  Cmmgr32.exe is a type of exe associated MSDN disc 1268, developed by Microsoft for the Windows operating system. The latest known version of Cmmgr32.exe is 1.0.0.0, which was produced for Windows. This EXE file has a popularity rating of 1 star and a security clearance "Unknown".

  If your computer works fine we then just ignore it and write us if you have problems.

• Network with XP (32 bit) and Windows 8.1 (64-bit)

  Printer HP F4280 is directly connected to the XP computer and via a network cable modem connection to the computer Windows 8.1.

  The XP computer gets perfect prints. Windows 8.1 computer gets incomplete prints - shadow stuff are printed, the print is missing.

  I tried new drivers on each - XP only accepts a 32-bit driver. I put a 64-bit on windows 8.1 driver - nothing improved 8.1 prints.

  What can I do?

  Hi donpatent,

  If you connect the printer directly to the computer Windows 8.1 and install it, it prints correctly?

• Tungsten T3 Hot Sync in Windows 7 Ultimate 64-bit and WIndows XP mode

  I've upgraded to Windows 7 Ultimate 64 bit and now my Palm T3 will not be synchronized.  I downloaded desktop 4.1.4e 6.3 and 4.1.4. I tried all three in both windows 7 and windows XP mode that tells me is a 32-bit o/s but I'm really not sure.  I tried to hot sync in bluetooth in windows 7, as the T3 and laptop connect but he always tells me that the port is used by another program? Does anyone know what I have to do to get it to sync or am I've sentenced to throw my faithful T3 out? Any ideas?

  Hello eaglesfan723 and welcome to the forums of Palm.

  The Tungsten T3 HotSync driver is not 64-bit capable, this is why you can't get the T3 to HotSync.  Please read this thread to learn more about your options with Windows 7.

  Alan G

• Application pools and CF9 64-bit and Windows 2008 R2 64-bit

  Hi all.

  Since about 3 months ago, I got CF9 64-bit running successfully on a Windows 2008 R2 64-bit, and 64-bit PHP server.

  It was a few days get it all working happily together, but it's an entirely different discussion, I'm happy to help if someone at - it need help.

  My question is for someone with some experience and understanding of the relationship between IIS 7, Cold Fusion and Application Pools.

  We have 8 GB of RAM on a 3.2 GHz dual processor box.  And on this particular server, we have about 350 sites of cold fusion.  All sites of very low traffic, I should add.  Like maybe on average 1000 page clicks each day.  In any case these sites ran flawlessly on 2 GB of RAM box with two 1 GHz processors.  And honestly, it ran more surely than it does now.

  What role the Application Pools in an environment dedicated to Cold Fusion?

  Because only one instance of JRun is already launched, SEE crashes when requests overwhelms the box and it blocks.  So, kind of defeated the purpose of the independent application in my opinion Pools.

  During my installation and transfer of these sites, I gave them each their own independent Application Pool, which are now individual instances of IIS worker process, each using about 10 MB of RAM.  Thus, for example, if the interaction that happens with 200 websites that they eat up to 2 GB of RAM, which, although not large, is very well now.  The problem is that I intend to leave this machine reach 500 sites before adding another box, but I worry about the performance.

  FUNDAMENTAL QUESTIONS:

  Should cold fusion Pools of independent applications for each web site or all websites can be used under DefaultAppPool?

  And what are the advantages and disadvantages of the two options?

  Is there a setting I should change who will say active stop w3wp.exe instances if no activity takes place for a certain period of time to release the memory.

  Thanks for any input.

  Rush, the bottom line questions:

  Should cold fusion Pools of independent for each web site applications or can

  all of these Web sites running under DefaultAppPool?

  No, it's not 'need '. They can all run in a pool. It is probably best to split them somehow, so that is something is not bad in a single application pool, at least those of the other application pool still works.

  And what are the advantages and disadvantages of the two options?

  As you note, each application pool uses a little memory. Not much, but as you note, 200 + it adds up. FWIW, the application pool is also part of the connection between IIS and CF, and there are times where just a recycling application pool (rather than restart CF) can solve a problem.

  That said, there certainly are times where CF will be what does not, and it won't matter to the application pools how you have. That's really what you want to focus on: why (if ever) SEE becomes is not responding.

  Is there a setting I should change who will say active

  instances of w3wp.exe to stop if no activity takes place for a certain

  time to release the memory.

  It is the default behavior of the application pools. See the "Advanced settings" for each pool in IIS 7 (or for her properties in IIS 6) for the recycling of various parameters of health protection.

  To return to your root cause problem (CF becomes unresponsive), anyway, you say "these sites were without fault on 2 GB of RAM box with two 1 GHz processors.  And honestly he ran more surely than it does now. "So what was 'before '? Not just less memory, I guess. He was also 32-bit instead? Was that an earlier version of the CF? It is useful for you to be more specific.

  Again, everything that is wrong is an explanation. It looks like you use the CF Server (not multiserver) mode, until you find in the coldfusion9\runtime\logs (not the coldfusion9\logs)? There may be important information before your plant that explains what is happening.

  As for your struggles get CF running on IIS 7, I'm curious: was it the 9.0? If Yes, what 9.0.1 (the free updater, which must be installed today on a download of CF9) which supported for IIS 7. Previously, it was indeed a little manual to make work work. And in fact, it may be that an update to version 9.0.1 could help resolve some problems if your manual configuration efforts could have hurt at all.

  Hope some of it is useful.

  /Charlie arehart

  [email protected]

  Quick delivery, help desk services remotely, the demand for CF (and CFBuilder)

  More on http://www.carehart.org/consulting

• Windows 7 - need help to install Microsoft Network Version 2.0 Framework 64-bit

  I need help, I had someone install Windows 7 Ultimate on my laptop.  I have the 64 bit version, I read some of the other forums and I Framework 3.5.1 installed, and I get a message each time I log on that says "Microsoft Network Version 2.0 Framework" is needed to continue. I tried to get it in the downloads of Microsoft, but I get SO many results that I don't know which one I need. I could not use my wireless, wireless printer, I have Windows 7.

  You may wish to review the previous discussions on this topic: Http://www.google.com/search?hl=en&safe=off&rls=com.microsoft: en - US & q = + site: social.answers.microsoft.com and .net framework 2.0 + required + continues & his = X & ei = qNouTI2hDsH_lgfV8cWSCg & ved = 0CBkQrQIwAA ~ Robear Dyer (PA Bear) ~ MS MVP(c'estàdire,messagerie, sécurité,Windows&UpdateServices) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Microsoft windows search indexer stopped working and was closed - need help please

  I started getting this message

  Microsoft windows search indexing has stopped working and was closed
  today
  I deleted the files as described in other threads
  I tried to restore the index - which has not worked
  the sfc/scannow gets to 78% and then I get an error log - I can't open the newspaper - I do not have permission
  What should I do?
  my computer came pre-loaded with vista, so I did not install CD

  Hello

  Download and install Windows Search 4.0 and see if it helps.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=14850

  Hope this information helps.

• SFC.exe flashes on the screen and will I need to download a torrent file, what is the problem?

  Gateway NV54... Try to open the torrent file... Need sfc.exe. It flashes on the screen and disappeared! What should I do?

  Hello
   
  Perform the System Restore to the point that your computer was working normally.

• Downgrade HP 15-r011dx for windows 7, need help finding drivers

  I installed Windows 7 64 bit on my new laptop HP 15-r011dx and can not find the drivers for the wireless network adapter. Any help would be greatly appreciated! Thank you in advance!

  Most of the Windows 7 drivers for your computer are on the page of drivers PC laptop HP 15-r011dx. This Realtek RTL8188EE 802.11b/g/n Wireless LAN driver should work on your computer. If this driver doesn't work or other devices you are missing, thanks for posting (text only) Windows Device Manager "Hardware ID" for all devices missing or unknown, as shown in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Windows XP-need help Urgent recovery

  I'm new to Toshiba. I HAV a hard drive 60 GB partition and windows XP home installed. I want to partition the hard drive now. Now after formatting the hard drive that I lose Windows XP it completely or there at - it of the chance to recover and reinstall it. Need urgent help.

  Hello

  You can reinstall your laptop using the recovery CD. It is easier and more rapid way to reinstall the operating system, all drivers and tools. Put the recovery in DVD-ROM CD, start the laptop and press the C button. At first, there is the choice between two types of installation (Standard mode and expert mode).

  If you choose first a whole HARD drive will be formatted and used for installing the OS. With the second (expert mode), it is possible to install the OS on the first partition. It is also possible to define what the partition size should be.

  Try it. It's very simple to do.

  Good luck

• Dumping Windows 8 installation of Windows 7 need help with drivers desktop HP ENVY

  During the holidays, we bought a HP ENVY with Windows 8 is installed, model H8 - 1417C.  This machine has a processor intel I7 3rd generation processor a graphics card from nvidia Geforce GT 630 with 2 GB of memory preinstalled audio beats and 12 GB of RAM as well as a 2 TB HDD.  Sounds like a great machine however several programs I use are not windows 8 compatible over all work via citrx will not load windows 8 anytime in the forseable future.  I therefore decided to remove the original hard disk and replace it with another 2 TB drive and install Windows 7, already purchased.  Today was the day of the change more however when I started hunting for the drivers I came across problems.  HP web site uses drivers for download only in Windows 8.  Its been a while since I've worked inside a machine and Windows 8 only adds to the problems.  But I am sure that if I can find the drivers that I can do the job, that is why I bought the Tablet instead of custom build in order to avoid all this. THANKS in advance for any help.

  You are the very welcome.

  Is there a recommended order generally agreed to install some of the hardware drivers.

  1 chip set.  Install and reboot.

  2 chart. Install and reboot.

  3. audio. Installation and reboot

  4. network cable.

  All others as you wish.

• HARD drive is full, but only be able to view the OS, applications and data. Need help to find out what else takes place.

  I am running a Compaq nx 7400 and Windows Vista Business edition. My HARD drive is 66.6 GB. PROG 7.63 files. Windows 9.61. 19.3 user data. 36.54 total.
  But my HARD disk is apparently full of 98.7 percent. Where the other GB 30.1? Recycle bin isempty and deleted temporary files.
  I want to upgrade to Win 7, but do not have the space.
  Can someone help me, please!

  Hello Falcodriver,

  Thanks for the return of the answer!  I have included a link below with a similar question.  It could be the system restore or backups that use the extra space.  I hope this link helps!

  Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/hard-drive-is-full-and-i-Don ' t-know-why/83b620da-c029-4a1b-81cd-0b166b008162

  Thank you