Network with XP (32 bit) and Windows 8.1 (64-bit)

Similar Questions

• Network with vSphere 5.5 and Windows 2012 problems

  Hello

  A few weeks ago, I have updated a server to a client of 4.0 to version 5.5. There was a mistake in any way, but that's another topic...

  Did the update because we run a machine Win2012 on this subject.
  Soon, I recognized that I have trouble, access to the machine, freshly installed by RDP. Some times it works, but mostly it doesn't. It simply expires. All the other virtual machines on the host (Win2008) seem to work very well (haven't heard anything else among users).

  From another VM on the same host, I started to ping the machine of W2012:

  Ping as 172.30.50.135 ausgeführt wird mit 32 bytes of data:

  Antwort von 172.30.50.135: bytes = 32 time < 1 ms TTL = 128

  Zeituberschreitung der Anforderung.

  Antwort von 172.30.50.135: bytes = 32 time = 1ms TTL = 254

  Antwort von 172.30.50.135: bytes = 32 time = 1ms TTL = 254

  Antwort von 172.30.50.135: bytes = 32 time = 1ms TTL = 254

  Huh? A ping with TTL 128, it has expired, then all the wider with TTL 254, cannot access the machine...

  After about three minutes the TTL to 128 jumps and I am able to access the machine again.

  If I disconnect and wait a few minutes, the same thing happens again... Very strange...

  Have not tried to use an adapter E1000 instead of vmxnet3 yet, but here to warn that if possible.

  Any ideas I could try?

  Thank you
  URS

  Oh... Shame on me... What a rookie mistake... Ha ha ha...

  Well... There was a point of access that are configured with the same IP address * facepalm *. I probably did it on the first installation and always used the same wrong IP address on and on. (Don't tell my colleagues!)

• Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  What exact model of AirPort Extreme do you have? Either have your tablet or laptop Win7 been updated recently? They were both able to connect before and not now OR they were never able to connect? Can the laptop Win7 access Internet when connected by Ethernet? One of these devices have problems connecting to other networks Wi - Fi?

• How can I restart firefox with the same tabs and windows?

  How can I restart firefox with the same tabs and windows?

  It is not in the file menu or tools. I get nothing when searching for help. FF still knows how to do it, say to update extensions.

  I know that I can do by saving my session, coming out, reboot and restore the session but is there a single command to do this?

  Thank you. -David

  I have attached a screenshot showing how to select restore automatic session just above the setting of the Home Page where it says "When Firefox starts".

  With this set, you can restart Firefox manually out using the menu-

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  -and then restart Firefox.

  If you want a real reboot with a click of button, you can check something on the Add-ons site: https://addons.mozilla.org/firefox/

• Install windows 7 in Envy DV7-7234 with Windows 8 with win7 dual boot and windows 8

  I can install windows 7 in Envy DV7-7234 with Windows 8 buth with dual boot: win7 and windows 8?

  Installing Windows 7 on your HP ENVY computer Notebook dv7-7234nr is not supported by HP. In addition, no Windows 7 driver is listed on HP Software and Driver Downloads page for your computer.

  HP does not recommend installing Windows 7 and it will support the installation of Windows 7 on a computer comes with Windows 8. HP doesn't provide drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not support some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You will need to DISABLE 'Secure Boot' and ENABLE 'Legacy Support' in the ' settings of BIOS ' settings below page;

  

  Then, start Windows 8 and run the console 'disk management '. Using "Shrink Volume", reducing the size of the "C:" partition about half of its original size. Name of the partition "C:" to something like "Windows 8". Now, start the computer from the Windows 7 DVD, making sure to select "UEFI - internal CD/DVD" or "UEFI - ATAPI CD/DVD ' and not ' Legacy - CD/DVD internal."  (I recommend using a disc of Windows 7 SP1latest drivers have been included in this topic. The use of the SP1 disc usually resolves most disk hard AF and other issues. )

  Install Windows 7 on the partition without label that was established earlier when you shrunk the partition "C:". Continue to install WIndows 7 by / responding to all the guests. Once you download Windows 7 on your computer, we have to track down the compatible drivers for it. Please list all the "hardware ID" for unknown or missing devices.

  Please send Bravo

• Yesterday, I bought photoshop elements 12, it came with disks for Mac and Windows, since I own a Mac and a Windows machine I would like to know if I can legally install on two machines?

  Yesterday, I bought photoshop elements 12, it came with disks for Mac and Windows, since I own a Mac and a Windows machine I would like to know if I can legally install on two machines?

  Yes, you can install it on two computers, and they can be a mac and a windows computer.

• Windows 7 Ultimate 64-bit networking with XP 32 bit systems

  I am an amateur to networking, so this is. Recently I bought Windows 7 ultimate 64-bit, and I want to do networking with XP SP3 32 bit. How can I do this? I have tried, (which I seem to find,) responses on the knowledge base, but nothing is. I would like to be able to file and to print between 2 machines share. The64-bit Windows 7 Ultimate machine is wireless and XP SP3 32-bit machine is connected directly to a modem. I have a Linksys WRT54G Router-v4, and the wireless, it's what Dell provided for me on the new machine. Someone at - it any help? Thank you

  Please repost in the Windows7 Forums: http://social.answers.microsoft.com/Forums/en-US/category/windows7 where Windows7 experts will be happy to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have problems with Adobe Photoshop CS4 and Windows 7 32-bit Professiol.

  When I open an image of the bridge, the photoshop Panel is locked on one side of the screen.  The onle way I can get out of it is CTRL, alt, delete.  The problem persists.  I tried to uninstall Adobe and reinstall with no luck.  I called Adobe and they think that there is a problem with the security system in Windows.  Help, please.

  Hey jrcjr,

  This could be attributed to several factors such as conflicts between device drivers, applications, settings of operating system, hardware, and corrupt elements in specific files.

  Basic troubleshooting
  
  1. make sure that the computer meets the minimum requirements for Photoshop.
  2. install all Windows updates. .
  3 re-create the Photoshop preferences file.

  Re-create the Photoshop preferences file to eliminate problems that may cause a damaged Preferences file.

  To re-create the Photoshop preferences files:

  1. quit Photoshop.
  2. rename the \AppData\Roaming\Adobe\Adobe Photoshop CS4\Adobe Photoshop CS4 Settings\Adobe Photoshop CS4 Prefs.psp directory Users\ [username] Adobe Photoshop CS4 Prefs.old.
  3 launch Photoshop. Photoshop creates a new Adobe Photoshop CS4 Prefs.psp file.
  If the problem persists, the Photoshop preferences files aren't the cause. To restore custom settings, quit Photoshop, and then delete the new Adobe Photoshop CS4 Prefs.psp file and restore the original name of the previous Adobe Photoshop CS4 Prefs.psp file.
  
  4 restart Windows in a modified mode
  
  See this article for reference:
  
  Restart Windows in a modified mode (Windows 7 and Windows Vista)
  http://kb2.Adobe.com/CPS/404/kb404913.html

  5. create the new account administrator (Windows 7 and Vista)
  
  Refer to this article:
  
  Create a new local administrator account (Windows Vista)
  http://kb2.Adobe.com/CPS/404/kb404912.html

  If nothing helps, please contact the vendor of software for any help.

  For your reference:
  
  Fix system errors and freezes in Photoshop CS4 (Windows 7 and Vista)
  http://kb2.Adobe.com/CPS/404/kb404897.html

  Important note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Low use of networks with a copy of the Windows 7 TO Windows 2008 Server client

  Using Windows 7 ultimate and Windows Server 2008 R2

  Two machines, connected via LAN 1000base-T with CAT5e, with a full duplex 1 GB switch between... and Yes, I tried swapping the cables and ports. Server has two RAID5, a tray of 6 and a tray of 8. Resort of work has two RAID5, a 3 SSD and a tray of 4. Both sides with the help of Intel CPU iX and a 811xC chipset RealTek Gb LAN, same latest LAN drivers on both machines. Static, client IP address in a workgroup and server a domain controller for a domain (have not tried to join the client to the domain yet).

  I use Windows Explorer to COPY a set of files of 20 GB... I also tried xcopy and robocopy, with similar results. I tried all suggestions concerning the card settings network about unloading of duplex, big package, DRC, some changes to netsh (RSS and autotune) and a few others. Nothing has really affected the rate of final transfer significantly improve the use (and backup speed - the whole point of this exercise).

  Server to server disk 2 Disk1: > 250 MB/s (server disk IO is not a problem).

  Server to server disk 1 Disk2: > 250 MB/s (server disk IO is not a problem).

  Workstation Disk1 to Disk2: > 150 MB/s (workstation disk IO is not a problem).

  Workstation for Disk1 Disk2: > 150 MB/s (workstation disk IO is not a problem).

  Now for the IO: first a base line by using the server-side Windows Explorer to copy a Client mapped drive to a local drive on the server:

  -Disk1 (D :) Server Workstation Disk2(Z:): 91MB/s (près de 100 % d'utilisation de LAN).))

  Everything looks good so far, but we will retry the same operation, but use Windows Explorer of the customer to copy a disk server mapped to a client local drive:

  -Disk2 workstation to the server Disk2: 25 MB/s down to 17 MB/s; sometimes as low as 9 Mbps. average about 20% use.

  It seems that there is something in Windows 7 that prevents fast passes; or something in Windows Server 2008 that blocks quickly gets. I put the client and server-side receive the training for people with reduced mobility, normal, highlyrestricted and experimental, in different combinations. Once again, nothing concrete to report as an improvement.

  The MS Gurus, which suggests that I do with NetMonitor as well as capture something worth their time to diagnose?

  People - I think I finally found the culprit - and I feel pretty stupid not finding it earlier. No of MS technicians also shoot quite appalled could help.
  Disable Windows Search service (a service of indexation).
  It seems if you never 'change' which is sought (such as adding a new disk, the oath of research), the service will begin to read all the files that are deleted or added to the field of research. If you move, copy, even delete files will incur the wrath of Windows Search indexing delays.
  Once again:
  Turn off / disable - Windows Search - service to start.

• scanning with a mx892 Cannon and windows 8

  I'm trying to scan a document to multiple page in a single PDF with the Canon MX892.  I think I need the driver, MP Navigator Ex Ver 5.1.  It will download but not open on my machine Windows 8.  All solutions?  Currently, without this driver, I can only scan each page individually, and only as a tif or jpg.

  Hello

  Thank you for contacting Microsoft Community.
  Create PDFs of the analysis can be done using a software as well. Usually, if a scanner works very well with a PC (that is to say, scans a document/image can be saved) and it means that it has TWAIN driver installed as well. In this case, you can use any appropriate software to create PDFs, such as Adobe Photoshop or Adobe Acrobat or any other suitable software.
  To install MP Navigator Ex problem, please try the following link for version 5.1.0 (under software):
  http://www.USA.Canon.com/Cusa/consumer/products/printers_multifunction/office_all_in_one_inkjet_printers/pixma_mx892#DriversAndSoftware
  Be sure to select the correct version of Windows 8, Windows 8 indicates 32 - bit, and Windows 8 (x 64) indicates 64 - bit. Cannot install 32-bit drivers on a 64-bit platform and vice versa.
  Try to install. If you have problems to install, right answer here, with events.

• HP EliteBook 850 G3: No audio for no built in speaker and headphone with jack after driver and windows update

  Hello

  I just made some updates driver and windows (windows birthday) and after installation I have not any sound with the built-in spaker or with my headphones plugged with one taken more. But with a usb headset it works!

  When I go to the window of Windows playback devices there is no device present.

  I already update the Audio drivers and reboot to run the tool in solving audio problems in Windows, but nothing new, it does not.

  Gauthier

  Hi Gunthar,

  Give the driver following a shot

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_171406_1

  This driver solved the same problem we had with our Elitebook 840 G3

• Printing with HP Officejet 6100 and Windows 8.1

  I had no problem with the printer before installing Windows 8.1.  We installed the latest printer drivers from the HP website.  The printer wants to print to the back to the front, even though we clearly specified it to print from front to back.  It is typical for every program I use, but more troublesome for Sage 100 contractor, where I print paychecks and A / P checks.  We tried to uninstall drivers and reinstall them.  I even tried to "back to front" because it seemed he wanted to do the opposite.  He printed back to front.  Dial-up, rebooted and it continues to print at the back to the front.  I contacted HP Support and they don't have a clue as to why this is happening.  Help, please!

  Hello

  When you have reinstalled the printer did you use assistant printer?

  Try the following:

  Press enter
  Scroll down to print spooler
  Right-click on the spooler > select Properties
  Make sure that the Startup Type is set to automatic
  Under the service stop status
  Wait for Windows to stop the printer

  Control Panel > open the printer folder
  Right click on the printer icon > select Open
  Do you see the documents listed in the queue for printing?
  Click file > cancel all Documents

  Start > right click on computer > select Manage
  Click on continue on window UAC (Vista, Windows 7)
  Select Device Manager

  Click on the + sign next to Ieeee... compatible printer (Note: some models of printers require an IEEE 1284 parallel port, which allows the rapid two-way communication.)  Do not worry if it is not listed)
  Right-click on the printer driver and select uninstall
  Click on the + sign next to the imaging device (s)
  Right-click on the printer driver and select uninstall
  Click on the + sign next to printers
  Right-click on the printer driver and select uninstall
  Click on the + sign next to Bus USB controllers
  Right-click on the printer driver and select uninstall

  While the printer is turned on, unplug the cable from the rear
  Unplug the cable from the wall outlet

  Wait 5 minutes

  Plug the cable into the wall jack, and then the back of the printer
  Restart the computer

  Go back, and then restart the print spooler

  Try printing again

  Go to the manufacturer's website and search for updated drivers

• Everyone can synchronize their Karma with Moto Phone Tools and Windows 7?

  I bought phone Tools Motorola directly from Avanquest because the bike download link was broken days (not even sure if it works now). After installation on Windows 7, everything seems to work, and Windows indicates that the drivers are installed, but Moto Phone Tools can not find my phone. He asks me to do the usual, unplug, restart, etc., but never found on the phone. Support told me that they do not support Windows 7, so they won't help.

  Is anyone successfully using tools motorcycle Phone on a Karma with Win 7?

  I'm under that Windows 7 now remember?  So I know it works.

• PhotoShop CS6 will work with screen tactile Dell and Windows 10?

  I'm looking to replace my Dell laptop with a 15.6 laptop "series of Inspiron 5000, which has 16 GB RAM 1 TB HD, Intel i7 processor and an AMD Radeon R5 M335 4 GB DDR3 video card.  It is a touch screen with Windows 10.  In talking with Dell technical support, I was told that PhotoShop CS6 FONCTIONNERA NOT with Windows 10 not with the touchscreen even though technology Adobe said it will work with Windows 10 on its "required page.  Dell said that it works with WIndows 7.  I'm confused.  The Adobe forums seem to suggest that Photoshop CS6 will work, so with touch screen and WIndows 10, is there something in the specifications of laptop above Dell that suggests that I'm having a problem?  Will it be buggy?  PhotoShop CS6 will work only with a mouse and not the touch screen?  Is this a problem with the video card? I can't find enough information to feel confident about ordering this Dell laptop forums.  I can go to the 7000 series with a 4 GB NVIDIA® GeForce® GTX 960 M graphics, but I'm not a gamer.

  CS6 works fime on my Dell workstation.

  

• Duplex with our laserjet HP4100 and Windows 7 network printing

  We have two new HP with Windows 7 desktop computers and you try to use the front and back of our network service HP laserjet 4100 dtn can you suggest the correct drivers or settings please?

  Hi, this might be the question why his does not work.

  It's a bug in Windows 7. The duplexor is reported as not installed by default, so you'll have to change that.

  Go to the Control Panel, find the devices and printers, then click on it. Then right click on your printer icon and choose 'printer properties '. In the new screen go to the "Device settings" tab and under "automatic duplex print unit" set installation options on installed. Should be on is not installed by default, so change installed, then click on apply. Restart the software and perhaps even your computer and check that duplex printing is an option now.