Missing groups ACS 3.2

Similar Questions

• Missing groups from the application after the last update of lolipop

  After the last update on my Z3 (5.1.1 Android, build number 23.4.A.0.546), groups are missing in contacts. I don't see one of my groups in app 'contacts' Now I can't separate contacts in groups such as family, friends, colleagues, etc. This function of groups has been so useful. Please, everything back as it was.

  Sorry... I wonder worried about this case. A solution is found: everything really is okay. I had to click on "Filter", and then select all groups.

• Adding a custom VSA to a group - ACS unit

  Hello

  Using a secure ACS appliance 4.0

  I want to add a new provider of RADIUS and its VSA associated with the configuration of the ACS. This will be then returned in the authorization.

  I have already added the new seller and the VSA required through RDBMS. I can now see the new seller (supplier) RADIUS in NAP profile etc.

  However I can't seem to find a way that how to set the value of the SBA added? And assign it to a particular group? I can't find this anywhere VSA.

  Add an AAA client with "authenticate using the" Radius (vendor)

  Then go to Configuration of the Interface and select VSA to the user or group

  ~ Rohit

• Group ACS 5.3 removal Migrated_NDGs

  Hello

  I got the task to disentangle a 5.3 ACS server, devices are all imported from a former ACS 4.x server. All the devices in the "Migrated_NDGs" of the Group was created by the migration tool.

  Since I have no need of this group is safe to just delete the Group and the devices will remain in ACS?

  The only groups of network device I really need are the groups 'Rent' and 'Device Type'. Unfortunately, I don't have another server to test on and I do not want to delete the Group and find out that 700 + devices have also disappeared from ACS!

  You also wouldn't not possible to the device to export to CSV, delete them all of CSA, delete the 'Migrated_NDGs' group and then use the CSV file to import the devices return again, but less the Group column "Migrated_NDGs."

  Any help much appreciated.

  Mel

  I just tried this on my server and things worked well.

  If you delete the NDG has child nodes nodes, you may need to remove these nodes first, and when you do this, if there are devices that reference the node that you are deleting, then they get modified to refer to the root node. When finally only the root node is left then can remove the NDG.

  Having said that I recommend to do an export of network devices before starting a backup

  Would be interested to hear how you got and that things went well

• Group ACS 4.2 mapping user

  Hello

  We use GBA 4.2.1.15 with patch 8 on 1113 ACS SE box.

  Our requirement is to assign the ACS group Eve to the user based on the windows Nt group. Which means that I don't have to create individual users in ACS during user login, auth request will be forwarded to the AD (remote database). Depeneding on the group the user of the remote database must be mapped to the local database.

  To do this, I have configured 'database group mapping' according to the following cisco guide.

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/GrpMap.html#wp940538#wp940538

  However, whenever my AD users authenticate that they get the members of the default group configured in «\Default» profile

  I use the GANYMEDE Protocol + in my routers and switches for authentication.

  Please let me know if "External user database group mapping" works with GANYMEDE + or only with the RADIUS protocol.

  If it works with GANYMEDE + let me know what other configuration to do so that my ACS can map users to the appropriate instead of default group groups.

  Hello

  Can you post a screenshot of your group mapping configuration. This will work with Ganymede.

  Thanksm

  Tarik Admani
  * Please note the useful messages *.

• Go to the missing group

  Greetings,

  I was successfully consolidate my tabs in new group among many many created group tabs,

  then an accident happened after that visit a Web site requires Flash Player and Java plugin.

  Windows 7 error reported for container plugin and Firefox errors and the presentation of Firefox automatically

  required abandonment or restart Firefox, after you choose to restart the tabs on the new group are still exist

  but the passage of the group using a right click on the tab disappeared.

  I would like to report this problem to the solution for the future,

  Best regards

  MOHAMAD GHOUL

  Hi MOHAMAD GHOUL.
  First thanks for posting this topic, a lot of errors reported by users have contributed to improve the product over time. However, it wasn't a feature that has changed, I know.

  To move a group, you can move a tile representing a Web page outside his current group. https://support.Mozilla.org/en-us/KB/tab-groups-organize-tabs

  Was it an add on feature? I could be wrong as well, I do not personally much use tab groups. Would you mind showing a screenshot of this feature? How to make a screenshot of my problem? Install an older version of Firefox , if you need as well as.

  Thank you.

• Time Machine backup missing group containers folder?

  I'm on a MBP running 10.11 (Yosemite) - I tried to free up space on my SSD, and I finally remove some profile folders that it turns out that I really, really need. Specifically, I deleted the following:

  • ~/Library/group containers/UBF8T346G9.ms
  • ~/Library/group containers/UBF8T346G9. Office

  Archive a large number of emails locally, and (thought) they are all written in this file. So yes, whatever.

  I thought, "I'll go in a time Machine backup from a few days ago, cling to these bad boys, and I'm back in business." Unfortunately - I searched several TM backups taken in the last few days/weeks and I can not find the folder ~/Library/Group containers. Zero, zip, nada.

  I thought that maybe it's a hidden file or something, so I used the option to make hidden files visible in the Finder. The saw there and also hidden files in Time Machine. Anyway... no group containers folder.

  Any ideas or advice would be greatly appreciated!

  Find my own solution.

  It turns out that group containers is folder/system /. Library - and the. Library file is a hidden folder. Once I thought, I found what I need. BOO!

• How can I create a network of groups ACS 4.2

  Hello

  I want to create a site wise groups in the ACS4.2 is possible or not, please send me the steps.

  Secondly I am having nearly 5000 network devices in my network, I have to manually add all devices or any method is to import the devices in groups

  Please let us now

  With regard to the control of network group following link

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.0/user/guide/n.html#wp342699

  About importing customer, you can use CSUtil database utility

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.0/user/guide/AE.html

  check the section user and aaa client import

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.0/user/guide/AE.html#wp417039

  M.

  hope that helps rate if it is

• Cisco ACS 4.2 a user in several local groups

  Currently, I like this group map

  ACS groups window

  GRP of GRP-A-B-1 and PDM - 2
  GRP - A. GRP - 1

  GRP - Grp-2 B

  For example currently a user test1 is part of two groups 1 and 2 under windows and is mapped to the Grp-A-B of the CSA. Is it possible if I delete the mapping of Grp-A-B in ACS and can see the user test1 speratley in both groups (Grp - A and Grp - B) to GBA?

  Salam Muhammad,

  If you have a local user in ACS, this user cannot be a member of both groups at the same time.

  The same concept applies to external users. They cannot be mapped to two different groups at the same time.

  If you delete the configuration of Grp-A-B, the test1 user will be mapped to the first group in the list because ACS 4.2 process mapping group in the order:

  ' the snip "'

  Order of group mapping

  ACS always maps users to a single group of TISA. However, a user can belong to several groups the group mapping. For example, a user named John could be a member of the ensemble of the engineering group and California, and at the same time be a member of the combination of Group Engineering and management. If the value of group ACS mappings exist for these two combinations, ACS must determine what group John should be affected.

  ACS prevents contradictory group set mappings by assigning an order of mapping for the whole group maps. When a user who is authenticated by an external user database is assigned to a group of ACS, ACS begins at the top of the list of groups for this database mappings. ACS sequentially checks group memberships of user in the database of the external user against each group mapping in the list. Where to find the first set group mapping corresponding memberships to external users in the user database, ACS assigns the user to the group this group map ACS and ends the process of mapping.

  ' the snip "'

  Reference:http://goo.gl/cvc474

  HTH

  Amjad

  Rating of useful answers is more useful to say "thank you".

• User in several Windows/ACS group. Deny a permit

  I have several groups on ACS each tied to a group of AD windows.

  I have a VPN concentrator and a wireless Lan controller.

  I use ACS to authenticate access to the time, but I would like some VPN users have wireless users too, not all.

  If I use NAR to limit the "VPN users" to access WLC device all users with access to the VPN is not wireless, even those who are in the wireless group.

  Is - it there anyway to operate?

  This is how it works.

  Lets say you have three different groups on ad for NetworkAdmin, RouterAdmin,.

  Wireless.

  Go to the external user database == database group mappings == Windows NT/2000 == select the field

  to which you log == Add mapping.

  Select the ad NetworkAdmin group and ciscosecure Group 1 card select the ad RouterAdmin group and map it to ciscosecure Group 2

  Select the ad wireless Group and map it to ciscosecure Group 3

  Mappings of working groups in the order in which they are defined, first set up mapping is

  considered first and then second, third and so on. If a user is in AD Group NetworkAdmin and

  which is mapped to the ACS 1 group and it's the first configured mapping is

  First of ALL (if there is a user in the Group NetworkAdmin, it is always mapped to ciscosecure

  1 and NO further mappings for this user group is enabled and the user is authenticated or

  rejected)

  Scenario: If you have a user called cisco, group NetworkAdmin, cisco1 in RouterAdmin

  Group and cisco2 wireless. They will be always dynamically mapped to group 1, 2 ACS

  and 3 respectively as above mappings.

  You can see the mappings on authentication passed to users as to which group are

  they are mapped to.

  SCENARIO:

  Now if you want a NetworkAdmin user to authenticate to the NetworkAdmin devices and not

  devices or wireless RouterAdmin you should apply NARs for Group 1 because

  NetworkAdmin users connect to this group. Which will allow you access on the Group

  basis for a particular NetworkAdmin NDG or NetworkAdmin individual NAS device.

  NOTE:

  If you are applying NARs for VPN or wireless devices, you must configure two IP

  Base AND CLI/DNIS founded together as NARs were originally designed for cisco IOS for

  routers and switches.

  IMPORTANT: If a user authenticates successfully to the database AD once, his user name is cached on the database of ACS (NOT password) the only way to remove the previously cached user name is to go to usersetup find this user and manually remove it.

  ACS will not support the following configuration:

  * A user active directory which is a member of the 3 AD groups (groups A, B and C) * 3 people

  groups are mapped within FAC as follows-> A Group1, Group2-> B and group 3-> C.

  * The user is in the 3 groups, however it will be always authenticated by Group 1 because

  This is the first group, it appears in, even if there is a configured NAR summons

  the group-specific AAA clients.

  However there are if your maps are below order...

  Groups NT groups ACS

  A, B, C ===> Group 1

  A ===> group 2

  B ===> group 3

  C ===> Group 4.

  You can create a rule DIFFERENT for users a, B, C by configuring the NARS in Group1.

  This rule applies for use ONLY if it is present in ALL three groups (A, B and C).

  You can create a rule for users in Group A (Group 2)

  You can create a rule for users in Group B (Group 3)

  You can create a rule for users in Group C (Group 4)

  Here I am also attaching links related to the group mapping in the user guide:

  Order of group mapping:

  http://www.Cisco.com/univercd/CC/TD/doc/product/access/acs_soft/csacs4nt/acs33/user/QG.htm

  #wp940485

  Kind regards

  ~ JG

  Note the useful messages

• ACS 5.3 - privilege of user group

  Hello Experts,

  How to add a new group ACS 5.3 since AD... ? How can I configure the permission level... ?

  Scenario: A group of employees have given L1 access privilege.

  Thanks in advance...

  The most common solution for this is to put all your users to an AD security group, and then all you do is search for the members of this group according to the AEC authorization rules and if they are members, to return the necessary private

• Group to the Windows database mappings

  Hello

  I am trying to create a series of mappings between a single Windows group groups and one group ACS. I use a unit of ACS 4.0 with a Remote Agent ACS for Windows on a 2003 member server.

  I can add the database with success and map to the domain. When I create a new configuration, the Windows groups list correctly, but when I try to create the map, I find myself with the NTGroups mapped to "All other combinations" and my group of CiscoSecure put to that I've selected. I'm unable to add other mappings to simply replace the premiera. It behaves as if this database of Windows is actually another format that allows only one mapping?

  I noticed there is a limitation on the user, being member of more than 500 groups and I was wondering if this is applied at the point where the groups are listed, or when the user actually attempts to open a session. I'm reasonably sure that I have more than 500 groups.

  I was able to do 1:1 mappings in previous versions of ACS and Windows product.

  Thank you

  Scott

  Hi Scott

  This seems to be a question of Java applet. Try to upgrade your Java.

  Yor map 13:00 group a group ACS but the GUI (web interface) sends that information to the ACS. ACS is the default mapping.

  Try to make the mapping again & again. It will work at any given time.

• How to "failures" in the configuration of groups?

  When you configure a group ACS 3.3, how include you the ' disable the account if the failure of attempts to exceed x "?

  Thank you

  Hello

  It cannot be done using csutil but can be done using Sync of RDBMS. More about this at: -.

  http://www.Cisco.com/univercd/CC/TD/doc/product/access/acs_soft/csacs4nt/acs33/user/sad.htm#wp756877

  For Dbsync Action codes are: -.

  http://www.Cisco.com/univercd/cc/td/doc/Product/Access/acs_soft/csacs4nt/acs33/User/AG.htm#.

  We are interested in the code number 110 and 112

  Kind regards

  Vivek

• Group mappings

  You will have to type certain powers of the brain here. I can map an NT account to a group ACS? If I have a group on our domain called tngrp, can I map it to a HSCguest of ACS group? It will be the groups more detailed if these groups must be checked before our group of NT login domain?

  Thank you

  Dwane

  Yes, Yes and Yes. You can map windows at the ACs groups groups. The traps are:

  You cannot use the nested in AD groups (e.g. testgroup contains testgroup1 and testgroup2).

  A user can not mapped to several groups of ACS. For this reason, as you said, you want the largest groups first. For example, if you want admins to map to administrators and users of map users, you must set the admins above users mapping mapping (assuming that all admins are users).

  -Eric

• Permission of AAA with ACS Shell-games

  Hi all

  I use a router cisco 871 running that version 12.4 (11) T advanced IP Services.

  I have difficulty getting permission to AAA to work properly with ACS.

  I am able to configure ACS fine users and assign them shell and private level 7.

  I then install a set of Shell Auth and enter the issuance of orders and configure.

  When I log in as a user, I get an exec with a level of 7 priv no problem, but I never seem to be able to

  to access global configuration mode by typing in conf (or set up) terminal or t.

  If I type con? It is the only command connect, configure is never an option...

  The only way I can get this to work is by entering the command:

  privilege exec level 7 Configure terminal

  I thought the whole purpose of the ACS Shell Set to provide this information to the router?

  It's frustrating

  The ACS server is set up with the Shell Set named Level_7 order authorization

  It is attributed to the relevant groups and I have the 'Unmatched orders' option selected in the 'license '.

  The "unmatched Args allowed" is also selected.

  See an extract of my IOS config below:

  AAA new-model

  !

  !

  AAA group Ganymede Server + ACS

  Server 10.90.0.11

  !

  AAA authentication login default group local ACS

  AAA authorization exec default group ACS

  AAA authorization commands 7 by default local ACS group

  !

  Cisco radius-server host 10.90.0.11 keys

  !

  !

  privilege exec level 7 Configure terminal

  privilege exec level 7 set up

  privilege exec level 7 show running-config

  privileges exec level 7 show

  !

  Hope you can help me with this one...

  PS I tried with orders of privilege on the router and remove the router and just keep getting the same results!

  Hello

  So now,

  You're actually using two different options and trying to couple then together. What I would say is you either use authorization Command Shell function or play with level privileges. Not mixed together both.

  Above scenario might work, if you move orders to focus on level 6 and give the 7 user privilege level. He couldn't be sure. Try it and share the results.

  That's what I suggest that orders back to a normal level.

  Provided below are the steps to set up the shell command authorization:

  -------------------------------------------

  Follow these steps on the router:

  -------------------------------------------

  ! - is the desired username

  ! - is the password

  ! create - us a local user name and password

  ! - in case we are not able to get authenticated via

  ! - our Ganymede server +. To provide a backdoor.

  password username 15 privilege

  ! - To apply the aaa on the router model

  AAA new-model

  ! - Following command is to specify our ACS

  ! - location of the server, where is the

  ! - ip address of the ACS server. And

  ! - is the key which must be the same during the FAC and the router.

  radius-server host key

  ! - To get the authentication of users through ACS, when they try to log - in

  ! - If our router is unable to join the ACS, we will use

  ! - our local user name & the password that we created above. This

  ! - we prevent locking.

  AAA authentication login default group Ganymede + local

  AAA authorization exec default group Ganymede + local

  AAA authorization config-commands

  AAA authorization commands 0 default group Ganymede + local

  AAA authorization commands 1 default group Ganymede + local

  AAA authorization commands 15 default group Ganymede + local

  ! - Sequence of commands are for posting to the activity of the user.

  ! - When the user connects to the device.

  AAA accounting exec default start-stop Ganymede group.

  AAA accounting system default start-stop Ganymede group.

  orders accounting AAA 0 arrhythmic default group Ganymede +.

  orders accounting AAA 1 by default start-stop Ganymede group.

  orders accounting AAA 15 by default start-stop Ganymede group.

  --------------------

  ACS configuration

  --------------------

  [1] Goto 'Profile components shared' a-> 'Shell command authorization sets'-> 'Add '.

  Provide any name at all.

  provide sufficient description (if necessary)

  (a) for full administrative access set.

  In the unmatched controls, select 'allow '.

  (b) for all access limited.

  In the unmatched controls, select "decline."

  And in the field above 'Add a command' box, type in the box below and the main command "permit unmatched Args" Order under allow.

  For example: If we want the user to only have access to the following commads:

  opening of session

  Logout

  output

  Enable

  Disable

  Show

  Then, the configuration should be:

  -----------------------------------------------

  -Allowed unparalleled Args.

  -----------------------------------------------

  connection permit

  permit disconnection

  exit permits

  Select the permit

  disable the permit

  license terminal configuration

  ethernet interface license

  permits 0

  to see the running-config

  ------------------------------------------------

  in example above, user will be allowed to run only from commands. If the user tries to run the interface ethernet 1', the user will get "failed command authorization.

  [2] press 'submit '.

  [3] Goto Group on which we want to apply these command authorization set. Select 'change settings '.

  (more...)