Missing network CUCM services after restore

Similar Questions

• After restoring the factory network card settings will not start

  I have toshiba L300 satt he wouldn't start so after restore settings factory network card does not start so can't do updates cannot find wireless network and I tried plugging cable ethernet directly to the router still cannot be detected or nothing comes with the network adapter won't start not error code 10 tried to load the driver updates but it's so far has got no restore point or restore system disks completely made through bak right discso to normal, says its running vista 32 2006 windows looked everywhere no joy please don't help the driver is realtek rtl8101

  Hello

  go to toshiba and download the drivers for your model laptop

  There is a download tab at the top on the link below

  use the computer that you use to get here download and save to the desktop

  copy to a flash drive - transfer and install it on the other

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• Windows Media Player Network Sharing Service missing in Windows Vista

  I use Vista and WMP11.  I have all the Vista and WMP11 installed updates.  I'm trying to set up the sharing and noticed that the Windows Media Player Network Sharing Service is totally absent from Services.  I ran the Vista System File Checker and it did not help.  How do we install this service?

  Hello
   
   
  1. have you made changes on the computer recently?
   
  I recommend you do a system restore to the previous times and check if that helps. I have listed a few articles that explain the system restore in Windows 7.
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
  
  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
   
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Link to the original images broken after restore

  Hello

  I use the Photos app on my Macbook (last OS X el Capitan 10.11.4) already for a while (with the iCloud features disabled) with the photo library on my Macbook and the images on a network share. It worked perfectly so far until I had to do a new installation of the entire system.

  I made a backup Time Machine so that a copy of my home folder to an external drive before I have re-installed El Capitan 10.11.4 from scratch.

  After that I copied the photo library of my external hard drive in its original location in my home folder, mounted the network share that contains images and Photo enforcement.

  From a first glance, everything was going well and all folders and photo thumbnails are displayed in the Photos app, but this data comes from the photo library. If I want to 'Open the original file in finder' or 'export original file' in the Photos app, I get an error that the original file cannot be found.

  I have the same problem if I restore the photo library of the Time Machine backup.

  What I checked also:

  The library location is / was always the same (/ users/thomas/photos)-before and after the installation of the system.

  * The share network folder mounted is / was always the same (/ Volumes/images).

  Way even restore worked perfectly for iTunes (iTunes library on my MacBook and music files on a mounted network share) by just restore iTunes library to its original location.

  So what goes wrong with my restoration of the photo library? Any comment or suggestion is appreciated!

  Best regards

  Thomas

  If I want to 'Open the original file in finder' or 'export original file' in the Photos app, I get an error that the original file cannot be found.

  Have you tried to reconnect the original file?

  the error message must contain a button to search for the original file.

  Click on 'Find the Original', then select the photo missing on your external hard drive (or network drive), this should reconnect all the images in the same folder at the same time.

  

  Apple does not say if the original files on network volumes are supported.  It can break, if the drive goes offline.

• iPad 'No service' after reboot with 9.3.1

  I've updated my iPad 2 3 model MC982GP/A with 9.3.1 but after restore/update, if I restart the iPad and if "sim pin" is disable, iPad shows 'No Service' with the wifi bars. I need to remove the sim card and put new again for the 3G work.

  If "sim pin" is on, asking for the PIN, everything works fine. Is that I turn off the "sim pin" option the problem come back again.

  Same work with MDM, the problem persists.

  Does anyone have a solution? Is this a bug?

  HNowdy moodnut,

  Welcome to Apple Support communities.

  As I understand it, there is a problem connecting to a cellular data network with your iPad since the update to the latest version of iOS. Try to take a glance at article below and running through the General troubleshooting advice it provides.

  If you cannot connect to a cellular network or cellular data - Apple Support

  See you soon.

• Weird Time Machine question after restoration

  Hi all

  First post here so go easy on me

  I'll try and make this as brief as possible.

  I've been running an iMac 27 "2010 end (still running Lion 10.7.5, but it is stable so I have not found the need to modernize) and NAS from Synology DS212j with TB 2 * 3 disks for the last 3 years. I've set up time service Machine through DSM on the Synology with a quota of 1 200 GB for my iMac which worked perfectly while all the time, during which I restored the weird file without problem.

  Recently, for a number of reasons, I felt the need to update the OS of El Capitan to provide specific features that only there, so I made sure that my last backup was not serious and went through the upgrade process. It took a while but seems fine, but in the end, I became artifacts of the screen during the exchange between the office computers and for the worse, completely locked Mail machine as soon as you have clicked on an email. A lot of research on Google and all the patches applied but no joy, I decided to restore Lion and watch a clean install of El Crappo thereafter.

  At through the process of full restoration without problem and he has restored from the DS212j without a single question (took about 14 hours but again, it worked) and my Mac was back as if nothing ever happened. Happy days!

  Shortly after that, although the problem started with Time Machine backups do not tell me that there is not enough space on the destination to save my machine...

  1. I look into my quota on the NAS (the bit you set to ensure that backups are not the entire disk) and it tells me that there are 820 used GB which I guess is my backups Time Machine original that nothing should have changed on the NAS.

  2. I don't seem to be able to see the Time Capsule shared queue Station disk even after display in shared folders, it should he appear?

  3. I unhid it and he could ride through cmd & k and using smb / / nom_lecteur/Time Capsule so I can now see the volume in the Finder.

  4. I can see there are 2 * sparsebundle files, one for my iMac and the other for Macbook Air my wife. The file for mine displays a last updated date/time of a few minutes ago, but no size of file. The woman shows well, last time/date and file size (he stayed very well throughout this btw).

  5. when I enter Time Machine on the iMac all my historical incremental backups have disappeared and the only backup who shows also available is the date to which I restored from, nothing before and obviously nothing after because there is no space.

  I have not a clue what going on here, but it seems to me like it after restoring my sparsebundle file (which is always on the NAS and must be intact) is there, but for some reason the iMac cannot see/index / register or see one of the backups that are contained in.

  Apple support tried to help but actually said that they don't support anything other than an official time Capsule and Synology must implement the Time Machine in a different way because he could not find the sparesebundle file, only the tf volume content when it is mounted by trying to start the backup.  From what I read and checked the forums of Synology and the sheets, they don't do anything outside the norm with regard to the Time Machine application, it's literally just a network volume that stores the sparesebundle in the same Apple so designed, then why on Earth after restoring my iMac do not see the content of this sparsebundle file , and why it consumes disk space?

  So, what I'm looking for help, is this (or questions):

  A. How do I look inside the time Capsule (this is what I call the Time Machine shared disk) to see how many files is there and if there is a GB 820 that contains all the data from my legacy?

  B. someone at - it an idea how the iMac see and recognize the original file should be here?

  C. If I were to remove the rare bundle that I peut see, will that potentially be old and will be that free space that is held open and allow me to perform a full backup from scratch?

  D. If C is not the original file remains hidden, no idea how I can find...?

  E. do I have other options that you can think of...?

  Sorry, that was supposed to be brief, but I wanted to make sure I had all the info there to allow people to understand what has happened and what I did to try to resolve so far.

  Thanks in advance

  See you soon

  Mark

  Mark, in my opinion, your questions can be answered by the great Pondini http://pondini.org/TM/FAQ.html

• Missing or corrupt files after the installation of the SP3 for XP PRO

  Norton Anti virus history shows no deletions of these files.

  * original title - I have missing files or damaged after the installation of the SP3 for XP PRO. These are files of driver for my DVD player and Camera.Specifically [dcptp.sys] can not be consulted online *.

  And have you tried to reinstall the DVD software & camera?

  Why SP3 was installed years ago?

  Currently, the computer is fully patched to Windows Update?

  ==========================

  Device Manager and network connections may be blank after you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/953791

  Device Manager may not show all devices and network connections may not display network connections after installing Windows XP Service Pack 3
  http://support.Microsoft.com/kb/953979

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• print spooler is missing Windows xp services

  Hi my daughter using a fujitsu siemens laptop running windows xp edition version 2002 service pack 3 family. We have tried to install 2 different printers, but always get says print spooler does not. I checked in the service and there is nothing indicated for printers or print spooler. I looked in c\windows 32 and there are 2 files of coil it but I do not know what to so that it reappears in the services and I can turn it on. can anyone help please?

  Man that's great, as I must have contracted a virus that deleted my services print spooler. Made exactly as stated in the information and then rebooted and it works perfectly now. Really appreciate the help!

  While it is definitely a good read, none of these links seem to tell you how to add the lack of Print Spooler Service and the Microsoft link certainly not will help you add the Service lacks and is a waste of time.

  The Print Spooler Service missing Services, you must add it (how do you suppose that happened?).

  I don't have XP Home Edition, but this method works on XP Pro and I do not see why it would be different.

  Here's how to add the Print Spooler Service:

  If your system is Windows XP Service Pack 3, you can add the Service of print spooler missing to your system by using a registry import.

  Before making any changes to your registry, back up the registry with this free and popular tool:
  http://www.SnapFiles.com/get/ERUNT.html

  Reinstall the missing Print Spooler Service by creating a registry file that you can import into your system (tested on Service Pack 3).

  If you already have a registry entry for the Print Spooler Service, you can export it to a file and save it.  The following example is the code of a working XP Pro Service Pack 3 system generic registry.

  Open notepad to create a new text file by clicking Start, run and enter in the box:

  notebook

  Copy and paste the following lines of text into the new Notepad file:

  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler]
  "DependOnService" = hex (7): 52, 00, 50, 00, 43, 00, 53, 00, 53, 00, 00, 00, 00, 00
  "Description"="loads files to memory for later printing."
  "DisplayName"="print spooler".
  "ErrorControl" = DWORD: 00000001
  "FailureActions" = hex: 80, 51, 01, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, e8, 47, 0c,------.
  00,01,00,00,00,60, EE, 00, 00, 01, 00, 00, 00, 60, ea, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00
  "Group"="SpoolerGroup."
  "ImagePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.
  74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.
  00,70,00, 6f 00 6f, 6 c, 73, 00, 00, 00, 76, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 00, 00
  "LocalSystem ObjectName"=""
  "Start" =: 00000002
  'Type' = dword:00000110

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler\Parameters]

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler\Performance]
  "Close" ="PerfClose."
  "Collect"="PerfCollect."
  "Collect Timeout" = dword:000007 d 0
  "Library"="winspool.drv".
  "Object list"="1450".
  "Open" = "PerfOpen."
  "Open Timeout" = dword:00000fa0
  "WbemAdapFileSignature" = hex: comic, 83, ab, a6, 1, 8A, d9, c8, cc, ff, b8, 69, f2, 94, 18, this
  "WbemAdapFileTime" = hex: 00, 20, 7, 22, cb, 2B, c1 01
  'WbemAdapFileSize' = dword:00023 c 00
  "WbemAdapStatus" = DWORD: 00000000

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler\Security]
  "Security" = hex: 01, 00, 14, 80, 90, 00, 00, 00, 9 c, 00, 00, 00, 14, 00, 00, 00, 30, 00, 00, 00, 02,------.
  00, 1 c, 00, 01, 00, 00, 00, 02, 80, 14, 00, ff, 01, 0f, 00, 01, 01, 00, 00, 00, 00, 00, 01, 00, 00,------.
  00,00,02,00,60,00,04,00,00,00,00,00,14,00, 8 d, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00,------.
  05, 0, 00, 00, 00, 00, 00, 18, 00, 9 d, 01, 02, 00, 01, 02, 00, 00, 00, 00, 00, 05, 20, 00, 00, 00,------.

  
  23,02,00,00,00,00,18,00, ff, 01, 0f, 00, 01, 02, 00, 00, 00, 00, 00, 05, 20, 00, 00, 00, 20,.
  02,00,00,00,00,14,00, fd, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00, 05, 12, 00, 00, 00, 01, 01,
  00,00,00,00,00,05,12,00,00,00,01,01,00,00,00,00,00,05,12,00,00,00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler\Enum]
  "0" = "Root\\LEGACY_SPOOLER\\0000."
  "Count" = DWORD: 00000001
  "NextInstance" = DWORD: 00000001

  Save the new text file with extension .reg to your desktop or a folder with a name you can remember, something like:

  addspooler.reg

  After you save the file, close Notepad.

  Locate the file addspooler.reg on your desktop and double-click it.

  Alternatively, you can right-click on the addspooler.reg file, choose open with... and select the registry editor which will then import the file.

  Answer Yes to the following question: are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  I would restart at this stage to ensure that updates "stick."

  Now you should see the Print Spooler Service and you can right click, choose Properties and (if she isn't already) set the startup type to automatic and start the service if it is not running after reboot.

  Sine the Print Spooler Service should not be missed, I suggest you follow with this (or first):

  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

• the pure networks platform service is not running

  I can't use my wireless card no matter what and this message

  You (or did you) a version of Network Magic installed?  Generally, the complete message would be:

  The Pure Networks Platform Service is not running
  Pure Networks Platform Service must run in order for Network Magic to function. If you have manually stopped or disabled the Pure Network Platform service, restart now.
  [2 links]

  See this FAQ: http://www.purenetworks.com/support/faq/195.html (the site can be slow to load)

  The Microsoft Windows Installer Cleanup utility is no longer available from Microsoft, apparently because it sometimes more removed he was supposed to.  You can always get it, however, here: http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html

  If you use the Windows Installer Cleanup utility, make a first Restore Point (or back up the registry with C:\windows\erunt).

  If you feel uncomfortable using CIP, download and use For free Revo Uninstaller to uninstall the same applications listed in the FAQ

  Personally, I'd skip step 3 "download Network Magic."  There is really no need for this application and, as you saw, it can cause problems.

• After restoring the PC to factory settings because of the Trojan horse, unable to perform desk top applications (bad parameter).

  Windows XP in desktop HP 4 years.  After restoring to the original due to trojan settings, downloaded all the XP updates.  Applications always on the C:\ drive.  When to open the control panel: open / remove programs, none of these applications are displayed.  Program listed as "all users" in the icon property.

  After recovery, you must reinstall all of the programs that were previously installed using the original media.

  A recovery takes the computer to the settings at the start of the computer was first. Even if you have backed up your data, you will need to reinstall the programs such as the tax on the Turbo, Registry Mechanic.

  You will also need to install service packs and Windows updates your recovery CD unless has service pack included.

  Thank you

  Marilyn

• can't pc vista, sleep-even after restoration and even factory re - configure.

  can't pc vista, sleep-even after restoration and even factory re - configure.

  Hi Barry,.

  Welcome to the Microsoft community!

  The computer will not sleep.

  To help you better, we need more information.

  What is brand and model computer?

  To work with the issue, I suggest you check out the site:

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  http://support.Microsoft.com/kb/950686

  Note: once you are done with the boot, follow step 3 in the article http://support.microsoft.com/kb/929135 to set your computer to normal startup.

  Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

  Feel free to contact us for any question related to Windows .

• Peer networking grouping service is not running is the message. How to operate?

  I have two computers at home and have installed a printer on a wireless.  I tried to install another printer wireless in another part of my house but keeps printing one already installed.  I received a message ' peer networking grouping service isn'g running. "  If it could fix the problem, and if so, how can I get the service running?

  I finally got

  1. right click on the three services

  a peer network group)

  (b) peer network identity Manager

  peer name resolution c)

  one after the other.

  (2) rear right clicking on go properties-> logon.

  (3) name of the same profile for all three abuse (passwords must be retyping your own).

  then restart all of the services of three.

  Finally cool off homegroup...

  you will find no error :)

  It worked for me, thanks.

  1. I started by selecting 'peer network identity Manager.
  2 and clicked on the tab log.
  3. then select the bubble for "this account" not "sys local VAC.
  4. then click on the Browse button.
  5. then advanced down to the left.
  6. then find now on half right.
  7. Select "LOCAL SERVICE".
  8 then Ok outside.
  I was asked to restart the service before amendments would change, but I jumped until after I changed the other two services.
  Repeat steps one although 8 to peer name resolution and peer network group in that order. (I don't know why it makes a difference, but it worked for me)
  9 restart the peer network identity Manager
  10 start of peer name resolution
  11 start grouping of network of peers
  It worked for me and I've been hunting for days. Thank you very much to all the world. And a big thanks to rajanaveen.

• Peer Networking Grouping Service does not work; How can I make it work?

  I use Windows 7 and trying to set up a home network I am unable. After you run the troubleshooter, the only problem is that the Peer Networking Grouping Service does not work. Messages to indicate there is no other problems other than Peer name resolution Protocol (PNRPsvc) Service or the Peer Neetworking Identity Manager (p2pimsvc) Service is not running.

  How can I solve this problem?

  Hello

  First delete the file idstore.sst from the following location: C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore.sst and once you remove, restart the service Peer Networking grouping.

  Follow the steps to restart the service:

  a. click Start, type Services.msc in the search box and press enter.

  (b) in the Services window, search for Peer Networking Grouping.

  c. make a right click the service: peer networking grouping and click restart.

  Also, see the following Microsoft articles:

  Establishment of a network domestic:
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Why can't I create a homegroup? :
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-create-a-HomeGroup

  Hope the information is useful.

• Missing security in service center

  My computer came with windows 8, when I run Services.msc I can't find 'Security center' in respect of the services (local). Please how to do? Thank you very much

  -J' had mcafee and I uninstalled it (it came with the windows 8)
  -J' use a sony vaio
  -I don't have an antivirus now!

  Windows key + X, select command (Admin) prompt, type sfc/scannow and return.  If it repairs the system files, run it again until no errors found.

  Ensure that the wscsvc.dll file exists in the %WinDir%\System32 folder. If this file is missing, you can try to restore from your installation of Windows 8 media.

• Create the REDO Logs after restoration of RMAN

  Version 11.2
  Platform: Solaris 10
  
  We restore the cold RMAN backup to a new server. It's a basic restore RMAN where DB name remains the same.
  
  I understand that RMAN backup online redo logs, and for good reason.
  
  We have restored our datafiles successfully. The control file still has the old entries so the query below shows old information about recovery logs
  
  -Display of the configuration of the log file the old control file data

  SYS > select * from v$logfile;         ------------> The below output shows the result of the source server
  
      GROUP# STATUS  TYPE    MEMBER                              IS_
  ---------- ------- ------- ----------------------------------- ---
           1         ONLINE  /DATAM/DB/oradata/slmps/redo1.log      NO
           2         ONLINE  /DATAM/DB/oradata/slmps/redo2.log      NO
           3         ONLINE  /DATAM/DB/oradata/slmps/redo3.log      NO

  I have to use ALTER DATABASE RENAME FILE command as below to update the control file.

  alter database rename file '/DATAM/DB/oradata/slmps/redo1.log' to '/data/oradata/slmps/slmps_log01.dbf' ;
  alter database rename file '/DATAM/DB/oradata/slmps/redo2.log' to '/data/oradata/slmps/slmps_log02.dbf' ;
  alter database rename file '/DATAM/DB/oradata/slmps/redo3.log' to '/data/oradata/slmps/slmps_log03.dbf' ;  

  Currently, in the new server, at the level of the BONE there is no physical file above to
  

  /data/oradata/slmps

  I need to create physically redo new logs using the command or the command ALTER DATABASE RENAME above key create a physical file at the level of the BONE?

  Salvation in spiral,

  Surely, RMAN will search for redo logs when RECOVER is issued.

  When you issue the command RECOVER after restore, RMAN does not check online redo logs. During RECOVERY, RMAN will try to apply the archivelogs or incremental L1 if it has been saved on the source server. RMAN Backup restorations online redo logs or never.

  Here OP tries to restore the backup from the cold to a new server. In this case the RECOVER command is not necessary. The example of the Oracle doc you mentioned should do a restore, recovery of a backup hot. In this case, during the RESTORATION, RMAN will try to apply archivelogs or L1 of the incremental backups.

  In both cases (cold backup restore or restore, recover from Hot Backup), it is the

  alter database open resetlogs
  

  command that will create the online redo log, so it is absent in the location specified by the control file. Because it is a restoration to a new server, recovery logs is missing because it has not been restored (because it has not been saved)