Peer networking grouping service is not running is the message. How to operate?

Similar Questions

• Peer Networking Grouping Service does not work; How can I make it work?

  I use Windows 7 and trying to set up a home network I am unable. After you run the troubleshooter, the only problem is that the Peer Networking Grouping Service does not work. Messages to indicate there is no other problems other than Peer name resolution Protocol (PNRPsvc) Service or the Peer Neetworking Identity Manager (p2pimsvc) Service is not running.

  How can I solve this problem?

  Hello

  First delete the file idstore.sst from the following location: C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore.sst and once you remove, restart the service Peer Networking grouping.

  Follow the steps to restart the service:

  a. click Start, type Services.msc in the search box and press enter.

  (b) in the Services window, search for Peer Networking Grouping.

  c. make a right click the service: peer networking grouping and click restart.

  Also, see the following Microsoft articles:

  Establishment of a network domestic:
  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network

  Why can't I create a homegroup? :
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-create-a-HomeGroup

  Hope the information is useful.

• How can I fix it? message is peer networking group service does not work

  When I connect, I can get online.   When my wife logs on the same computer, it is and error and cannot get online.  I get a message in addition to ppeer service networking group does not work that States cannot access service Group Policy client and see the system event log.  Is there a way to fix this?

  Hi thadkresho,

  Thanks for posting your query in Microsoft Communities. The problem description, I understand that your wife is not able to connect on the same computer. Provide the following information for a better understanding of the issue:

  ·         Did you do changes on the computer before the show?

  ·         You use a third-party security software?

  ·         What version of the operating system is installed on the computer?

  ·         If it works much earlier?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.

  Method 2: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  Let us know if you need more assistance.

  Thank you.

• the pure networks platform service is not running

  I can't use my wireless card no matter what and this message

  You (or did you) a version of Network Magic installed?  Generally, the complete message would be:

  The Pure Networks Platform Service is not running
  Pure Networks Platform Service must run in order for Network Magic to function. If you have manually stopped or disabled the Pure Network Platform service, restart now.
  [2 links]

  See this FAQ: http://www.purenetworks.com/support/faq/195.html (the site can be slow to load)

  The Microsoft Windows Installer Cleanup utility is no longer available from Microsoft, apparently because it sometimes more removed he was supposed to.  You can always get it, however, here: http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html

  If you use the Windows Installer Cleanup utility, make a first Restore Point (or back up the registry with C:\windows\erunt).

  If you feel uncomfortable using CIP, download and use For free Revo Uninstaller to uninstall the same applications listed in the FAQ

  Personally, I'd skip step 3 "download Network Magic."  There is really no need for this application and, as you saw, it can cause problems.

• No sound. Error "The Audio Service is not running"

  The sound stopped working on my Dell XPS M1210. I get the message "The Audio Service is not running" and the resolution of problems can't fix. Any suggestions?

  Hello

  See if that helps you.

  Do to Dell drivers and download page > equip your Dell model number > follow the prompts to find the drivers for your operating system > Search Audio drivers > download and install.

  http://www.Dell.com/support/drivers/us/en/usgen1/DriversHome/NeedProductSelection

  See you soon.

• Print Spooler service is not running and cannot install a new printer

  My print spooler service is not running and the computer will not let me install a new printer. How can I fix it?

  Hi John,.

  What is the number and the model of your printer?

  You can try running the fixit of the printer and check.

  Diagnose and automatically fix problems printing and printer

  You can also consult the following articles and check.

  Printer in Windows problems

  Resources for the resolution of the printer in Windows XP problems

• Error message-""could not be achieved. " "The print spooler service is not running.

  Can anyone help. Whenever I try to print, I get a message that I need to add a printer, even if I have a printer installed. When I click Yes I Mindprint an another error box saying 'operation could not be performed. The print spooler service is not running"could someone advise how to solve this.

  Thanks in advance

  Matt

  Hello

  ·        Have you tried the steps that are listed in the article manually and see if the problem is resolved?

  ·        Who is the manufacturer of the printer and what is the model?

  ·        When did you get the error message when you try to install the printer or when you try to print?

  I suggest you follow the steps mentioned below.

   

  Method 1:

  I suggest you to check if the Printer Spooler service is started.

  a. Click Start and click Run.

  b. type services.msc in the box run.

  c. find the print spooler service and right click on it.

  d. click Properties and verify that the startup type is set to automatic.

  Method 2:

  Step 1:

  To start in safe mode, follow the steps mentioned below.

  a. restart and keep tapping F8 until you reach the start menu.

  b. Select safe mode and press ENTER.

  Step 2:

  In safe mode, delete the printer and spool driver files. To do so, start Microsoft Windows Explorer, and then delete all files and folders in the following two folders (where C: is the drive where you installed Windows XP):

  C:\Windows\System32\Spool\Printers

  C:\Windows\System32\Spool\Drivers\w32x86

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Services do not run in win2k3r2?

  In my server, I installed Win server2k3 r2 Standard with sp1. my server is running for 3 years with any problem, but last 3 days in theaters do face has a few problems in services, i.e. computer browser service does not work and service of network connections do not run both services do not, run but if I try to start the service that I make a mistake, called "Dependence is not available please check" as am facing this error. and if I have a network and sharing Center it can't see my lan card, but my server is running live, this server is the web server, there is no problem that all are running and am able to ping to the door also...

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the System Management Server on TechNet forum. Please post your question in the Systems Management Server 2003 TechNet forum.

• "Printer properties cannot be displayed. The print spooler service is not running. "(even when it works)

  When I click with the right button on a particular printer and try to view the properties of it, I get the following message:

  Printer properties cannot be displayed.  The print spooler service is not running

  It is, it is run as go to-> Services administrative tools in the Control Panel checks.

  One of the 'printers', I installed is "send to OneNote 2007".  I can click right on this very well - just not this another printer. I'd be able to do if the print spooler is not running?

  Indeed, if I turn off the print spooler, * all * printer in "Printers and faxes" disappear.  So the fact that I'm still see them first place suggests to me that the printer spooler is running.

  I posted this on Microsoft.public.windowsxp.general a while ago and someone suggested that I visit this site .  Problem is C:\WINDOWS\system32\spool\PRINTERS is empty.  It is empty when the print spooler is running and it is empty when it is not.

  Also, I was unable to install KB896423 since I am running SP3.  Try to install he did the following:

  Setup has detected that the version of Service Pack for this system is newer than the update you are applying.

  There is no need to install this update.

  The printer is a "local printer attached to this computer" connected via a "Standard TCP/IP Port".  Personally, I think such a printer should be called "a network printer or a printer attached to another computer", but that is the terminology used by the "Add Printer Wizard".

  Hello terrafrost,.

  Thank you for visiting the Microsoft answers community.

  What is the model number of the printer that you are using?

  Printing a "Standard TCP/IP Port, is used for a printer that is directly connected to a network, not on your local system.

  I would try to uninstall your printer and reinstall your printer.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm not abe to do the Windows updates, message warns me that the service is not running

  I can't do an update of windows due to a message saying that the service is not running.  What this means and how can I solve the problem.

  Hi EmogeneHutchinson,

  ·         Did you do changes on the computer before the show?

  ·         You install updates?

  ·         What is the full error message?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

• Firewall is corrupt? Does not connect to the internet. Get the message "the firewall settings window cannot be displayed because the associated service is not running".

  Original title: wall of fire is corrupt? Does not connect to internet

  The "firewall settings window cannot be displayed because the associated service is not running" message, but then it won't access the internet or run the program. We have done all the steps listed here http://windowsxp.mvps.org/sharedaccess.htm, but nothing worked so far. Even re-installed SP3. Help, please! Thank you very much.

  Hello

  What happens if you disable the firewall?

  Run the checker (sfc) system files on the computer.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  a. open an administrator command prompt. To do this, click Start, click principally made programs, Accessories, right-click Guest, and then click run as administrator.

  If you are prompted for an administrator password or for confirmation, type the password or provide confirmation.

  c. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  The following article might be useful:
  After you run Microsoft Windows AntiSpyware (Beta), you have problems with the network, or you receive an error message
  http://support.Microsoft.com/kb/892350

• Windows wireless service is not running on this computer

  I have a Gateway laptop running 32-bit Vista SP2 I can't connect to wireless networks. One day, I had no problems and the next, I am unable to find all the networks.  When I try to connect to a network, I get a message that Windows cannot find any network.  When diagnosing why link is clicked I get an error dialog box "Windows Wireless Service is not running on this computer. When the Windows network diagnostics dialogue box I click on 'Start Windows Wireless Service' and then told me that Windows cannot resolve the problem and ask contact me my network administrator or ISP.

  I tried several fixes of different forums and nothing has worked.  I ran the antivirus scans that have not found anything.  Y at - it a fix for this problem?

  Hello
   
  1 have you checked the State of the wireless autoconfiguration WLAN service in the services window?
  2. do you have any security software installed on the computer?
  3. have you made changes on the computer recently?
   
  We will first try to manually start the wireless service, i.e. the WLAN AutoConfig service. To do this, connect to the computer as an administrator.
  1. Click Start, type services.msc and press to enter.
  2. Locate the autoconfiguration WLAN service, double-click to open its properties window.
  3. on the general tab, change the startup type to automatic and click on the Start button.
  4. click on apply, then ok.
   
  Try to connect to the wireless connection and check the result.
   
  If the service still does not start, run the System File Checker tool to scan the computer for the corrupt system files and automatically correct. To run a sfc scan, try the steps mentioned in this link: http://support.microsoft.com/kb/929833
   
  For more information on the wireless settings, see this link: http://technet.microsoft.com/en-us/library/bb878035.aspx
   
  Let us know the result of the above troubleshooting steps so that we can discuss in detail and help you further.
   
  Kind regards
  Syed V
  Answers from Microsoft supports the engineer.

• Cannot install message of updates that Windows Update cannot currently check the updates because the service is not running

  Original title: update Windows impossible currently to check updates because the service doesn't work (Vista 64)

  I get the message: ' Windows Update cannot currently check for updates, because the service is not running. "  You may have to restart your computer. "I rebooted without change.

  I have Vista 64-bit with installed MSE and it cannot update its virus database.  I have also Windows Media Center put up a TV and may not be able to download an updated Guide.

  Can someone help me please?  I just finished a full scan of Malwarebytes and a full scan of MSE - both in Mode safe mode with networking.

  I found a few other forums similar to my problem, but I don't know that they are the same as mine.  I'm a little wary about some of the suggested corrections, so I thought I would like to get suggestions directly related to my problem.

  Thank you!

  Hello

  1. what exactly happens when you try to download the update for Windows Media Center guide? Do you get any error messages?

  2 did you do changes on the computer before the show?

  Method 1: Run the update utility

  See the following site:

  Problems with installing updates

  http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-problems-with-installing-updates.

  Method 2: Start services

  Make sure that the following services are started:

  a. Windows Update

  b. Background Intelligent Transfer Service

  c. Cryptographic Services

  To do:

  a. click Start, type services.mscwithout the quotes and press enter.
  b. double-click the service and under Service status click Start, if it is not started.

  Method 3: Reset the update components

  See the following site:

  How to reset the Windows Update components?

  http://support.microsoft.com/kb/971058.

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry .

  Method 4: Run the fixit

  See the following site:

  The problem with Microsoft Windows Update is not working

  http://support.microsoft.com/mats/windows_update/.

• Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

  Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

  I am currently using windows 32 bit vist

  I rebooted, I changed the settings, I don't have a file called window update service in the service section to stop and start, I tried the fix programs, I'm out of ideas and I need help!

  Suggestions?

  Hello

  1. have you made changes on the computer before this problem?

  2. which antivirus app do you use?

  I suggest you try these methods and check.

  Method 1:

  Anti-virus software may conflict with Windows Update. You can temporary disable them and check the issue.

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 3: If the methods above do not help, I suggest you delete the edb.log file and check if that helps.

  Follow these steps:

  a. click the Start button, click computer.

  b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log
  Where 'C' is the drive of operating system
  c. delete the log file, and then restart the computer and check the issue.

• Windows update error: Windows cannot currently check the updates because the service is not running

  Original title: Windows Update No. Longer - Vista business functions

  Last month my Win Vista will not update, little matter how many times I try to do. I always get the error message "Windows cannot currently check for updates because the service is not running." You may have to restart your computer. "Control via msconfig reveals that he is ticked as"running ".

  I run Microsoft Fixit has several times. It is said he has "solved" the problem, but it did not work. Of course there is a corrupted somewhere file that needs to be replaced.

  Please don't say no "update for Win 7" or "Reinstall Windows" because it's not just going to happen.

  Thanks in advance,

  Hello

  1. you remember to make changes to the computer before this problem?

  2. what anti-virus software is installed on your computer?

  Follow these methods.

  Method 1: Anti-virus software may conflict with Windows Update.  You can temporary disable them and check the issue.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 2: How to reset the Windows Update components?
   http://support.Microsoft.com/kb/971058
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

   

  Method 3:  If the methods above do not help, I suggest you delete the edb.log file and check if that helps.

  Follow these steps:

  a. click the Start button, click computer.

  b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log

  c. delete the log file, and then restart the computer and check the issue.

  Well, it's going to be a long Chronicle, but in the end, the problem has been resolved. Please bear with me:

  Running the program MS Fixit in the past without success, I tried to run the update after you temporarily disable AVG, my program AV. no joy.

  I then ran CC Cleaner to get rid of some of 'dead weight '. I even used its registry cleaning option (which included saves).

  At that point, I did some 'household', & began to defragment my HD with Defraggler. But since it seems to take forever, I went to My Defrag, who finished the job much quicker.

  Although I tried to delete the edb.log file using method 3, I kept getting a message system which was unable to complete this action because the file has been opened in another program.  In the end, I was able to delete the file, but fact directly through Explorer. There also seems to be a sort of small file edb.log, indicating that it was a "recovered" version I deleted that one as well.

  At this point, I ran MS Fixit, who States that the Windows Update components needed to be fixed and proceeded to do so again. Because he had allegedly "fixed" my Updater in the past, I was not holding much hope that this time would be any different. So, after that what he has done, I was pleasantly surprised, I might actually start updating!

  However, the update message that a new version would be dl before I could go any further. So I did it.

  When the new version is started, it ran for about 10 minutes, coming with about 50 updates. According to flush out those who were of no use to me, finally I had dl and installed all relevant updates. And now, the update seems to work fine.

  Once again, my apologies for the long answer. But I wanted to tell the whole story, as I did not quite plan of RajithR.

  Thank you!