missing Ntoskrnl.exe and other errors when who reinstall windows 7 pro 64-bit

Similar Questions

• 0x8007045D error code when you install Windows 7 Pro 64-bit

  I get an error 0x8007045D code when installing Windows 7 Pro 64 bit on the same same MSI 970 Gaming (AMD SB950 Chipset 970 +) motherboard, even OEM Win Pro SP1 7 X 64 dvd, the installation on an EVO of 840 Samsung 250 GB SSD.

  16 GB of Ram (4 GB X 4 stix. Ran this OS on this forum for a year, trying to do (was) a clean install. I am puzzled, never had a problem like this.

  I was the installation of the operating system, and you're right, when he was on the 2nd works. He remained at 0% for a while then I get this error message "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. 0x8007045D error code.

  Someone at - he already had this?

  Any help would be appreciated.

  Thank you

  Try to reduce the amount of RAM installed on a unique key and try again.

  If you have several hard drives attached, disconnect all except the disk target hard.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

• BSOD of ntoskrnl.exe and other issues

  It is a new construction, new CPU/motherboard, etc, have a new video card. Three hard drives are in my system (1 SSD and HDD 2). I don't really know where to start to look at what may be the issue. I thought it was the video card, so I replaced it, but I still get similar questions.

  The BSOD is sporadic and the question doesn't seem to be the same thing every time, but ntoskrnl.exe has developed a couple of times. What are the possible problems that I might have?
  Here's what WhoCrashed said on the more recent accidents:
  Friday, February 8, 2013 4:59:24 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\020713-8751-01.dmp
  This was probably caused by the following module: atikmdag.sys (atikmdag + 0x33F79)
  Bugcheck code: 0xA (0xFFFFF88042F698C0, 0xFFFFF80002AD574F, 0x2, 0 x 1)
  Error: IRQL_NOT_LESS_OR_EQUAL
  file path: C:\Windows\system32\drivers\atikmdag.sys
  product: ATI Radeon Family
  company: Advanced Micro Devices, Inc..
  Description: ATI Radeon driver in Kernel Mode
  Bug control description: This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  A third-party driver has been identified as the likely cause of the system error. It is suggested that you search for an update the following driver: atikmdag.sys (ATI Radeon Kernel Mode Driver, Advanced Micro Devices, Inc.).
  Google search: Advanced Micro Devices, Inc. IRQL_NOT_LESS_OR_EQUAL

  Friday, February 8, 2013 4:59:24 AM GMT crashed your computer
  crash dump file: C:\Windows\memory.dmp
  This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
  Bugcheck code: 0xA (0xFFFFF88042F698C0, 0xFFFFF80002AD574F, 0x2, 0 x 1)
  Error: IRQL_NOT_LESS_OR_EQUAL
  Bug control description: This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Thursday, February 7, 2013 21:41:43 this computer crashed
  crash dump file: C:\Windows\Minidump\020713-8564-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x7EFC0)
  Verification of error code: 0 x 50 (0 x 8, 0xFFFFFFFFFFFFFFFF, 0xFFFFFFFFFFFFFFFF, 0x0)
  Error: PAGE_FAULT_IN_NONPAGED_AREA
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that invalid system memory was referenced.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Tuesday, February 5, 2013 11:53:09 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\020513-9063-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x7EFC0)

  
  Verification of error code: 0 x 50 (0 x 8, 0xFFFFF80006BC3FF6, 0xFFFFF80006BC3FF6, 0 x 2)
  Error: PAGE_FAULT_IN_NONPAGED_AREA
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that invalid system memory was referenced.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, January 30, 2013 3:26:32 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\012913-9110-01.dmp
  This was probably caused by the following module: dxgkrnl.sys (dxgkrnl + 0 x 2333)
  Bugcheck code: 0xD1 (0xD, 0x301A460, 0x6FD35E33, 0x1)
  Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
  file path: C:\Windows\system32\drivers\dxgkrnl.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: DirectX Graphics Kernel
  Bug control description: This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Monday, January 28, 2013 10:35:18 PM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\012813-8314-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x7EFC0)
  Bugcheck code: 0x3B (0xC000001D, 0xFFFFF80002AE3305, 0xFFFFF8800DEEA090, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Saturday, January 26, 2013 4:26:54 AM GMT crashed your computer
  crash dump file: C:\Windows\Minidump\012513-9500-01.dmp
  This was probably caused by the following module: hal.dll (hal + 0 x 5472)
  Bugcheck code: 0x1E (0x0, 0x0, 0x0 0 x 0)
  Error: "KMODE_EXCEPTION_NOT_HANDLED"
  file path: C:\Windows\system32\hal.dll
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: Hardware Abstraction Layer DLL
  Bug control description: This indicates that a kernel-mode program generated an exception which did not catch the error handler.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Friday, January 25, 2013 05:35:47 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\012413-11622-01.dmp
  This was probably caused by the following module: ntoskrnl.exe (nt + 0x705C0)
  Bugcheck code: 0x3B (0xFFFFF80002A91846, 0xFFFFF8800CCB9600, 0xC0000096, 0x0)
  Error: SYSTEM_SERVICE_EXCEPTION
  file path: C:\Windows\system32\ntoskrnl.exe
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Kernel System &
  Bug control description: This indicates that an exception happened during execution of a routine that passes from non-preferred to the privileged code code.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

  Wednesday, January 23, 2013 05:06:04 GMT crashed your computer
  crash dump file: C:\Windows\Minidump\012213-9328-01.dmp
  This was probably caused by the following module: pci.sys (pci + 0x25F1)
  Bugcheck code: 0xA (0 x 4722, 0xFFFFF80002ACEF85, 0 x 2, 0 x 1)
  Error: IRQL_NOT_LESS_OR_EQUAL
  file path: C:\Windows\system32\drivers\pci.sys
  product: Microsoft® Windows® Operating System
  company: Microsoft Corporation
  Description: NT Plug-and - Play PCI enumerator
  Bug control description: This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.
  This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
  The accident took place in a standard Microsoft module. Your system configuration is perhaps incorrect. Maybe this problem is caused by another driver on your system which cannot be identified at this time.

  Dan you have 5 different causes there. May be an indication of Malware.
  To eliminate this possible cause, please download the free version of Malwarebytes.

  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.
  
  http://www.Malwarebytes.org/products

• HP Elitebook 2570p: need driver for the device system of Base and BMC20702A0 on HP Elitebook 2570p (Windows 7 Pro 64-bit)

  Hi-

  I just installed Windows 7 Professional on my HP Elitebook 2570p, and Device Manager, I'm missing the drivers for the device Base and BMC20702A0 system.

  I went to download HP driver and downloaded page 3 recommended for chipset drivers, but that has not helped.

  Here is the list of the categories of driver for my HP model from the HP Web site.  Where should I go next door to download the drivers?

  Thank you!

  

  Hello:

  You need these drivers for these two devices:

  The media JMicron card reader driver allows the card slot multimedia integrated in the laptop models running a supported operating system.

  File name: sp63637.exe

  This package contains the Broadcom Bluetooth driver and software for models supported that are running a supported operating system. Broadcom Bluetooth 4.0 driver is required to enable the Broadcom Bluetooth 4.0 devices and is compatible with Broadcom Bluetooth 3.0 and earlier versions.

  File name: sp66402.exe

• I can't change my wallpaper to something other than a solid color - Windows 7 Pro 64-bit

  I am running Windows 7 64-bit SP1.

  I can't change my wallpaper to display something other than a selected solid color. However, while restarting, a selected background image appears for a little while.

  I tried to change the themes without success. I tried a lot of different things. This shouldn't really be a problem. Any thoughts/ideas?

  Hello

  1. Can you see the list of wallpaper in Desktop System Properties?
  2. Recently made changes to your computer? Is there an error while changing the wallpaper?
  3. Right-click on any photo image and select 'set as wallpaper '. Check what is happening?
  4. Are you able to see the desktop icons? have you checked if the problem persists in another user?

  Following steps below can help you to solve your problem:

  • Navigate to the following location:

  C:\Users\\AppData\Roaming\Microsoft\Windows\Themes\TranscodedWallpaper.jpg

  • Delete the file TranscodedWallpaper.jpg.
  • Restart the system once.
  • Now, try to change the wallpaper.

  Hope it will work.

• I use Intel (r) 82945G Express chipset family, my computer performance score is between 2.3 and 5.7 I'm using windows 7 pro 32 bit how to speed up my system.

  1. I am using windows 7 Pro 32-bit on Intel (r) 82945 G chipset.

  2. my computer performance details are as

  Processor of 4.7 (using mid-range (R) Premium (R) D CPU 3 .00GHz)

  5.2 memory (it's 2 GB DDRII)

  Chart 2.3

  3.1 games graphics

  5.7 primary hard drive (I have 1 TB Seagate)

  3. Please help me to improve my score

  abadola

  I don't think that you will be able to increase your score of graphics or increase graphics performance using this chipset... He is old enough.

  If your computer allows it, you can install a separate graphics card.

• Error installation Windows 7 Pro 64 Bit OEM

  Dear all,

  I just confused with install windows 7 Pro 64 Bit OEM CD to the client PC and activate it already.

  I want to change it with Windows 7 Pro 32 Bit OEM CD(I have the cd and license) and activate it.

  The question is:

  1. can I reinstall Windows 7 Pro 32 Bit OEM CD and activate it?

  2. What is the license of Windows 7 Pro 64 Bit OEM? can I re use or sell to another customer?

  3. the procedure for my problem?

  Sincerely,

  Johan Effendy

  Dear all,

  I just confused with install windows 7 Pro 64 Bit OEM CD to the client PC and activate it already.

  I want to change it with Windows 7 Pro 32 Bit OEM CD(I have the cd and license) and activate it.

  The question is:

  1. can I reinstall Windows 7 Pro 32 Bit OEM CD and activate it?

  Answer: Yes

  2. What is the license of Windows 7 Pro 64 Bit OEM? can I re use or sell to another customer?

  Answer: No, once that you install on the customer's PC's linked to this PC / motherboard. There is a small chance that if you have another exact and model PC as the client, it "might" work.

  3       the procedure for my problem?

  For the 32 Bit just activate as you normally would.

  For the 64-bit version, you can try if installed on a similar PC phone activation.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  J W Stuart: http://www.pagestart.com

• Q327120 error when you install Windows xp sp3

  Original title:
  error code
  When I try my winxp sp3 his watch after error what is the solusion? Pls help

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. If I understand correctly, you receive the Q327120 error when you install Windows xp sp3. I suggest you follow the troubleshooting steps to check if this may help.

  You did changes to the computer before the show?

  Method 1:
  You can try the steps in knowledge base article and check.
  Error message: Windows Service Pack 1 has detected that one or more protected Core system files on your computer have been modified
  http://support.Microsoft.com/kb/327120

  Method 2:
  

  Perform a clean boot and then try to install and check.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Check out the link:
  How to download Windows XP SP3
  http://support.Microsoft.com/kb/322389

  Reference link:
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  If you need further assistance, please answer and we will be happy to help you.

• While trying to install windows 7 pro 64-bit, as the files to try to finalize an error message appears and says that windows cannot manipulate files to work with the hardware in my computer

  Original title: Win hardware problem. 7 PRO

  Trying to install windows 7 pro 64-bit, and while files are trying to finalize a message error shows up and says windows can't handle files to work with the hardware in my computer.

  The only thing I can think is that maybe the Mobo is not compatible with windows 7, do not answer on the Asrock web page.

  -Asrock Fatal1ty killer FM2 + Mobo. Processor AMD Athlon X 4 860 K. RAM Corsair 2133 (executed in 1866)

  Or they are corrupt, try to get a new copy and try again.

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• I get the error message: Windows update 0 x 80070490 (2015-08-18-T-10_48_47P) not corrected an error when I install Windows updates. How can I fix?

  I get the error message: Windows update 0 x 80070490 (2015-08-18-T-10_48_47P) not corrected an error when I install Windows updates. How can I fix?

  Hello

  I apologize for the delay in responding.

  This error means that a file (CBS Manifest) that is needed to install updates is corrupt. I suggest to try the procedure described in the following Microsoft Support article and check if it helps. This article consists of the steps to troubleshoot and correct this error.

  https://support.Microsoft.com/en-us/KB/958044

  For more information, you can consult the following Microsoft Help article.

  http://Windows.Microsoft.com/en-us/Windows/Windows-Update-error-80070490#1TC=Windows-7

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• Running Windows 7 Pro, 64-bit and all empty and none of them exe icons only opens.

  I am running Windows 7 Pro, 64-bit Service Pack 1 installed and when start I had dozens of white on the bottom bar task icons by saying that no files have been associated to the program.  I hit cancel and cancelled all out.  All the .exe icons (shortcuts) are empty, all the program under all PROGRAMS icons are empty, and nothing does not open.  My documents on the desktop will BE open in word or excel, but not from the shortcut.  The regedit.exe will work not or open.

  Does anyone have a solution?  It happened yesterday, I restored to 10 October and my computer worked, so I turned it off.  This morning when I turned on he did it again.

  Thanks in advance for you help.

  Jim

  You have changed the exe file association.

  Follow the instructions here and getting on for exe. http://www.dougknox.com/XP/file_assoc.htm

  Note: You have posted to a forum that is completely different to your question/problem category. Your question has been moved to a forum category that matches it's better.

• How to solve (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) error when installing on Windows Server 2008 R2 COM component

  How to solve (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED)) error when installing on Windows Server 2008 R2 COM component

  Please repost your request in one of the appropriate Forums for Windows Server.  Thank you!

• Hi, I have 0xc0000142 error when I start the first pro after the last update, before that I had no problem playing first pro...!

  Hi, I have 0xc0000142 error when I start the first pro after the last update, before that I had no problem playing first pro...!

  Hello Gene,

  You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

  Kind regards

  Navdeep Pandey

• Windows Update error Code: 80072F78. Windows 7 Ultimate 64 bit

  No matter what I try, I always get error code 80072F78.  I am connected via gigabit LAN and I have no problem, surf the web.  I have my temporary disabled anti-virus and Windows Firewall program off the coast (although I tried with it too).  I have a legal, legitimate copy of Windows 7 Ultimate.  I tried for three days to get all updates from Windows Update, but I am unable to get updates from 15 or so.  With much trial and error I finally could get many updates available (close), but I can't seem to get the rest of them.  I am satisfied that I have no connectivity issues.  I can't understand why Windows Update guard fails now.  Does anyone have an idea what could be my problem?

  He did move to Win7 or is it a brand-new (ish) computer?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  You may encounter temporary connection [e.g. 0x80072F78] errors when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  How to reset the Windows Update components?
  [Skip the section to APPLY to; run the difficulty in default and aggressive mode]
  http://support.Microsoft.com/kb/971058

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• LaserJet p1006 and windows 8 pro 64-bit

  When released drivers for the laserjet p1006 for windows 8 pro 64-bit? I have a printer which i cannont use...

  Passed Windows 7 32-bit to 64-bit Windows 8, had all the problems mentioned above, trying to install Laser Jet P1006.  Downloaded and installed Windows 7 64 bit P1006 drivers from HP web site, hp_LJ_P1005_Full_Solution_Row.exe, and ljP1000_P1500-HB-pnp-win64 - in .exe.  Had to install both in the order listed above, printer would not work with a driver in itself.  Printer works like a champ, can't install the new 64 bit drvr Win8 when (if) HP comes out with it.

  Update: A worked well for a week, out of nowhere the same document is sent to print twice, one showing file size, a display 0 kb to the size of the file cannot be deleted 0 kb file without unplugging the printer and restart the computer.  May have to do with the installation of Office 2010. Back to the drawing board.

  Update 2: after failing to uninstall driver, used HP print and Scan Doctor in order to get the docs on the queue, and how 'delete device '.  After that, couldn't find no port selected in "Print properties", I use the usb port 2, but was not yet registered, usb 1 was for my other printer (Lexmark).  Computer restarted, a second icon p1006 printer/device manager, was listed usb port 2 and was selected.  Printer worked.  Uninstalled first icon legacy p1006, unfortunately the two p1006 icons disappeared.  Computer restarted, windows detected printer and installed, p1006 icon reappeared in Device Manager, usb still selected as port 2.  At the moment the two printers work.  All I have to ' do now is of fig on the flag "yellow" on my pc modem... 8 windows aah.

  Also:
  1. recently installed Office 2010.  In previous versions of windows and Office, had a similar impression of the problems with the hp laserjet p1006 queued default printer.  The fix was to choose Microsoft XPS Document Writer as default, and then select the printer that I want to use in the program when I tried to print a document.  Even once just in case.
  2. having two HP printers (for example a deskjet and a laserjet) downloaded on your computer causes all sorts of problems of print queue.  Has to do with both printers using common files. HP has ever imagined a fix for what I know (haven't checked lately), so if you have an HP printer that is installed, and you want a second printer, you have to buy a different brand as Lexmark for your second printer printer.  Suppport from HP will talk about common files, but not on the installation of a different brand printer, then you will have to take my word for it that it works.