LaserJet p1006 and windows 8 pro 64-bit

Similar Questions

• Unsupported personality: PCL on print Laserjet 1012 from Windows 7 Pro 64-bit

  I have an HP Laserjet 1012.  My PC has Windows 7 Pro 64 bit.  I used the Laserjet 1015 PCL 6 drivers.  When I printed the first two times, it worked fine.  Now each page just print "Unsupported personality: PCL ' at the top.

  What should I do now?

  Thank you for your ' Experts for a day Tech Support.

  Mark

  Hi rbarbo43,

  I found the following thread that will help you during the installation of the printer in Windows 7. Let me know if you need assistance?

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/LaserJet-1012-driver-for-Windows-7/m-p/351356#M16114

• Maximum memory for Pavilion DV7t special edition running Windows 7 pro 64-bit with Intel i7 Q720

  I have an entertainment 2009 Dv7t Special Edition running on Windows 7 64 bit with intention processor i7 Q720 @1 .60GZ. I have 8 G of ram now but need to go to the top. Can I put two 8 G in the slots. Read some reviews say the software works and Windows 7 pro 64-bit can take up to 132 G RAM, if that was even possible. I run two internal drives. But with the addition of the cloud and running photoshop on cloud too much memory is used, slow down the computer. You want to go to 16. Everybody does and no problem?

  Thank you

  Hello

  As mentioned previously, there are SEVERAL dv7t editions and special editions. We have dv7t-3000, 4000-dv7t... and it is very difficult to find the right plug. Please use the following link to find the product/model number:

  http://support.HP.com/us-en/document/c00033108

  Your machine could be the following:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us & dlc = in & lc = in & product = 5292645 &

  If so, the #4 on the following manual page it support 16 GB max:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us & dlc = in & lc = in & product = 5292645 &

  You can have 2 x 8 GB, no choice. Only a few portable computers that have 4 slots and supports up to 32 GB. No way on this earth at this time, you can find a laptop that supports the 132 Gb of RAM.

  Kind regards.

• using Laserjet-Canon LBP 1120 printer on new HP ProBook 4350 s under Windows 7 Pro (64 bit).

  Hello everyone, I have a printer Canon Laserjet LBP 1120, I try to use via the new HP ProBook 4350 s under Windows 7 Pro (64 bit).  I tried the recommended troubleshooting options, nothing helps... Any suggestions?  Thanks a bunch

  All drivers/software from the Canon site, if they have win7 64 bit software and install according to Canon intstructions

• Windows 7 Pro 64 bit black screen with the mouse only on startup and nothing else

  Hi there, Windows 7 system recently froze on me when I tried to move a large file on a USB hard drive. I didn't was not able to close the file so I decided to stop my PC with the regular start-> Shut Down.

  Now when I try to turn on my computer, after the "starting Windows" and Microsoft report goes to a pure black screen with just a (mobile) mouse cursor, not keyboard commands or click right work (eg. ctrl + alt + delete does nothing).

  I tried to start in safe mode, safe mode with network, they do the same thing after the "Starting Windows" screen. Tried to boot with my Windows 7 Pro 64-bit installation disk so and entered commissioning repair - no problem. Tried system restore and it went successfully, however after clicking restart is again the same thing!

  It's really making me crazy, could someone please help me? I really want to reinstall Windows and lost my files (since I can't even in a form any Windows Installer interface I'm not able to do a repair).

  Thanks in advance for your suggestions!

  I will proceed to a re - install now, thanks anyway for your efforts

• While trying to install windows 7 pro 64-bit, as the files to try to finalize an error message appears and says that windows cannot manipulate files to work with the hardware in my computer

  Original title: Win hardware problem. 7 PRO

  Trying to install windows 7 pro 64-bit, and while files are trying to finalize a message error shows up and says windows can't handle files to work with the hardware in my computer.

  The only thing I can think is that maybe the Mobo is not compatible with windows 7, do not answer on the Asrock web page.

  -Asrock Fatal1ty killer FM2 + Mobo. Processor AMD Athlon X 4 860 K. RAM Corsair 2133 (executed in 1866)

  Or they are corrupt, try to get a new copy and try again.

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• Windows 7 Pro 64 bit and slow down the performance of the system

  Its week Tuesday I had to buy a new motherboard for my computer as a (ASUS M5A97 THE R2.0) upgrade from my old Board that was used at the time. At present, I suffer from these setbacks and problems that I don't understand completely at all on the right, or what reasons is causing my system to the right way to work. From this moment everything that I know, is installed correctly with all the appropriate drivers (x 64) are also installed for the chipset on the map, the video card (XFX Radeon HD 6770) as well and nothing else that needed to be installed at the time because the operating system running the version of Windows 7 Pro 64 bit. The problem that I'm facing here is that for some reason, my system is now slowly in response to any kind of program or an application (either Internet Explorer, Windows Update). I have flashed the BIOS and there now the most recent version, and the system is upgraded to SP1. Any ideas?

  Good so I found the problem. It was real HARD drive I had in my system. After you told me to do what you had posted, I started thinking and wanted to try a theory. I connect a spare hard drive I had in another computer, I like a build up of hobby. It's only 200 GB, but still more than enough. Anyway, when about and installed the operating system on it and of course I could tell a MAJOR DIFFERENCE in the overall performance!

  The original HARD drive that is a Western Digital 500 GB took more than 2 1/2 hours to install completely; the Seagate 200 GB took only 20 minutes! In addition, I have much better overall system stability. So for now I'll stick with the smaller drive, until I can get a HARD drive more be my main in my system.

• Running Windows 7 Pro, 64-bit and all empty and none of them exe icons only opens.

  I am running Windows 7 Pro, 64-bit Service Pack 1 installed and when start I had dozens of white on the bottom bar task icons by saying that no files have been associated to the program.  I hit cancel and cancelled all out.  All the .exe icons (shortcuts) are empty, all the program under all PROGRAMS icons are empty, and nothing does not open.  My documents on the desktop will BE open in word or excel, but not from the shortcut.  The regedit.exe will work not or open.

  Does anyone have a solution?  It happened yesterday, I restored to 10 October and my computer worked, so I turned it off.  This morning when I turned on he did it again.

  Thanks in advance for you help.

  Jim

  You have changed the exe file association.

  Follow the instructions here and getting on for exe. http://www.dougknox.com/XP/file_assoc.htm

  Note: You have posted to a forum that is completely different to your question/problem category. Your question has been moved to a forum category that matches it's better.

• I have a brand new installation of 13 PS elements. How I have difficulty drag and drop doesn't work is not on my system Windows 7 Pro 64-bit?

  I just installed PS 13 items on my system Windows 7 Pro 64-bit. Mouse clicking works, but how I have difficulty drag and drop works do not? For example, I can't create a selection rectangle or drag the sliders or move the panels of the tool or resize a text box, I tried as an administrator (it does not help). Same "ClickLock" in Windows does not drag. No other program on my machine has problems. Help!

  Reset preferences did not set anything. Even reinstall 13 elements PS has not fixed anything.

  However, late breaking new...

  See other discussions on this topic, which suggests a conflict of startup program that might be the cause, I did some experiments.

  All the functions of the mouse to 13 PS elements worked well if I started my Windows 7 in "safe" mode
  So, back in 'normal' mode, I manually disabled all startup programs. Returned mouse problem.
  Enter the control panel "services", I disabled 'Synergy' (a program that allows me to share my keyboard and mouse between two computers). Fixed a problem.
  The reactivation of all the startup programs while leaving a synergy service is turned off, everything works still fine.
  Start all programs present and re-empowerment synergy, but turned off its 'high privilege check box. Everything is still fine.

  Conclusion: Synergy in high privilege mode service was the only culprit.
  Synergy in non high mode allows my PS 13 items and keyboard/mouse sharing to coexist.

  The strange thing is that only PS elements 13 was affected by synergy. I detect no problems anywhere else. But it doesn't matter; the new arrangement (no high synergy) works fine for everything.

  Al

• I use Intel (r) 82945G Express chipset family, my computer performance score is between 2.3 and 5.7 I'm using windows 7 pro 32 bit how to speed up my system.

  1. I am using windows 7 Pro 32-bit on Intel (r) 82945 G chipset.

  2. my computer performance details are as

  Processor of 4.7 (using mid-range (R) Premium (R) D CPU 3 .00GHz)

  5.2 memory (it's 2 GB DDRII)

  Chart 2.3

  3.1 games graphics

  5.7 primary hard drive (I have 1 TB Seagate)

  3. Please help me to improve my score

  abadola

  I don't think that you will be able to increase your score of graphics or increase graphics performance using this chipset... He is old enough.

  If your computer allows it, you can install a separate graphics card.

• Installing drivers for HP M1319f on Windows 7 Pro 64 bit

  I upgraded a client to a new office of HP with Windows 7 Pro 64 bit OS. She has a HP Laserjet M1319f connected via USB. When I download and run from the driver download site on HP or download, save, and make the installation of the C drive, it gets to the point says "Adding printer drivers" and it crashes at two or four bars, so I have to kill it in the Task Manager. I tried to install it with the printer unplugged and got the same result. Windows OS printer drivers work fine.  What's up with the HP driver installation?

  Hi dpgerhardt,

  1. Open my computer
  2. Navigate to the location of C:\Program Files (x 86) \HP\HP LaserJet M1319 MFP Series\Scan To and then create a shortcut on your desktop for hppscan0.exe

• Aurora running, but can not be played on Desktop Windows 7 pro 64-bit

  I've been using Aurora for several years with Windows 7 pro 64-bit with the two latest major 28/29 Auroa just missing from my desk after clicking on the icon on the desktop, I tried to uninstall, but the system told me I had still Aroura running uninstall so I had to reboot my PC, I could uninstall I then reinstalled Aurora and a pinned icon appeared in the taskbar, but when I clicked on the icon on the desktop the hourglass turned but no Aroura started on the desktop, so I went through the whole thing again and uninstalled Aurora and installed Firefox V26 and now it has progressed to the last version that has disappeared as exactly the same way.

  What can I do if I use Aroura again because it is very good and safe to use?

  I can't use the troubleshooting info as I can't see Aurora/Firefox to view or copy/paste the info shown.

  Pete

  Thank you solved the problem, I restarted the PC and now Aurora works again thanks.

• HP PavilionSleekbook 15-b009ee: HP Pavilion Sleekbook 15-b009ee Windows 7 Pro 64-bit drivers

  I need the Drivers of HP Pavilion Sleekbook 15-b009ee Windows 7 Pro 64 bit. Please if someone can sat down me.

  Hello:

  Try the W7 x 64 drivers and software for this model except the BIOS and firmware files.

  http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-envy-Ultrabook-4-1100/5296027/model/5316650

  Your model uses the Intel HD graphics driver.

• HP Pavilion Slimline s3760in D: need help in Clean install Windows 10 pro 64-bit?

  Hello

  For the past few months I am running windows 10 pro where I had to upgrade windows 8.1 pro 32 - bit windows 10 pro 32-bit. If my system is activated in windows 10 pro and it is authentic.

  

  When I checked in the type of system, it says operating system 32-bit, x 64 processor.  4 GB RAM only 3.12 GB of RAM is usable.

  This means that my processor supports 64-bit operating system. That's why I intend to clean windows install 10 pro and install the 64-bit version so that I can use all 4 GB of RAM.

  That's why went into a tool for creating media and downloaded Mediacreation Toolx64 but when I try to launch the app it shows error "this app cant run on your pc. But Mediacreation tool for 32 bit gently. According to me, given that my current OS is 32-bit so mediacreation toolx64 is not running.

  So I was wondering if I run 32-bit tool mediacreation and choose 'create multimedia installation for another pc' and chosen architecture (32-bit and 64-bit) times, then the clean installation of windows pro 10 OS will I have the option to choose between the version 64-bit and 32-bit version?

  [2] already my windows 10 pro is active in 32-bit version, I get a product key error when I clean install 10 pro for the 64 bit version of windows?

  [3] will be my windows 10 64-bit pro is activated? Since my windows 10 pro turned in a 32-bit version.

  Microsoft memo said "Your PC will activate online automatically as long as the same edition of Windows 10 has been activated successfully on this PC using the free Windows 10 upgrade offer."

  HI Varadar,

  You're right, you choose the installation program of the media creation tool that corresponds to your current system, but create a support for another PC and select 64-bit or both.  I would choose 64-bit.

  Yes, what you plan should work.  Once you have upgraded to Windows 10 32 - bit and Windows checked 10 32 - bit is set, you can use Media Setup to switch to Windows 10 64 - bit.  But... I could ask you to wait a month.  It was reported on the sites a Updatefor Windows 10 is expected in November.  This update will include some changes and corrections that we have already published to our group of insiders test.  The recent blog post is hereand scroll to the bottom of reading on the Activation stuff.  We also wrote about the changes, including the news of your task in our own forum.

  What do you think should work now today, if there is no problem or bug there is no backup.  But if you wait a bit, then the backup as explained will use your Windows 8.1 Pro key into your HP motherboard.

  I hope this helps,

  Charles

• BIOS 4.03 for workstation xw9400 running windows 7 pro 64-bit

  None does not know where and how can I update the bios on a running windows 7 pro 64-bit xw9400 (HP does not list in the drivers section?) currantly only got bios V3.13 and im sure it should be on atleast v4.03?

  see you soon

  Oh well all good now, worked to followed her the road to iso cd and managed to update the bios to version 4.03.
  
  Once again thanks for the support...
  
  Concerning
  Chardsky...