Missing option "install the signing keys".

Similar Questions

• JDE 4.2.1 install the signing keys

  Hello

  I have a problem. I recently installed an earlier version of JDE 4.2.1 in order to test it on one of the devices.

  I create my project with this version and it works fine on the Simulator. However when I'm asking signatures, it gives me an error:

  'Unable to signatures demand up to that this request has been saved with all the powers of signature required'

  Usually, I use the eclipse with version 4.6 and signature plugin it works fine.

  So my question is, how do I do signature work?

  Copy all the signature key files (*.csi files *.csk and sigtool.* ) in the JDE/bin folder.

• Re: Satellite T110-107 will not start in the form of recovery option using the f8 key.

  I tried several times and can't get the option of recovering your system by typing intermittently the * key f8 during the startup * as it says in the manual, it will just directly in Windows. I just installed the latest version of the BIOS, but that did not help either. I have no recovery discs, but I would get the f8 problem solved in any case. Everything else works perfectly. Thank you.

  Hello

  Maybe you didn t press F8 in the right way
  You must press F8 immediately after the laptop has been powered!
  Press several times to be sure 100%

  If this does not work, create the recovery disk! This should be done first before you do anything with the laptop!
  The recovery disk is always important and useful if something goes wrong with the HARD drive!

  After you create the recovery disk using this drive to put the laptop in the same State as on the first day of purchase

• Re-install the product key (Windows 7 pro) after replacing the motherboard

  Hallo

  Please help me how re - activate the product my windows 7 pro ater ke, replace the motherboard due to burned (motherboard)
  Thank you

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Please note that if you use an OEM license, you may not be able to do:

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

• Cannot install the signed file BAR, [if the argument "blackberry - sign - sigfile ' is not GPACACF]

  Hi all

  I have following queries on the use of certificates in BAR files.  Certificates are defined by the user.  [ie. certificates created locally using this link 'http://developer.blackberry.com/native/documentation/core/com.qnx.doc.nfc/topic/manual/t_nfcdevguide...

  Queries are

  1. the '-sigfile "command argument"blackberry-signer", if I have any other purpose than"GPACACF", I get the error message following ' result::failure 880/var/tmp/cgic851170: cannot access the Member ' META-INF/FILEACF.» EC'

   

     2 can I sign several certificates [one after the other] using the command "blackberry-signatory"?

  Forward to your response

  OK, I tested the procedure in the documentation and created a file of key PKCS #12 and gave my key an aliass MYALIAS. See the details here:

  $ openssl pkcs12 -in selfsign.p12 -info
  Enter Import Password:
  MAC Iteration 2048
  MAC verified OK
  PKCS7 Encrypted data: pbeWithSHA1And40BitRC2-CBC, Iteration 2048
  Certificate bag
  Bag Attributes
      friendlyName: MYALIAS
      localKeyID: D8 CB 15 E1 B3 30 0C 90 C0 57 EB FA A1 D4 20 BB 1C EF A7 40
  subject=/C=GB/ST=Berkshire/L=Slough/O=BlackBerry/OU=DevReel/CN=Test/[email protected]
  issuer=/C=GB/ST=Berkshire/L=Slough/O=BlackBerry/OU=DevReel/CN=Test/[email protected]
  -----BEGIN CERTIFICATE-----
  MIICgTCCAeoCCQDgvIXlO1lIYDANBgkqhkiG9w0BAQUFADCBhDELMAkGA1UEBhMC
  R0IxEjAQBgNVBAgMCUJlcmtzaGlyZTEPMA0GA1UEBwwGU2xvdWdoMRMwEQYDVQQK
  DApCbGFja0JlcnJ5MRAwDgYDVQQLDAdEZXZSZWVsMQ0wCwYDVQQDDARUZXN0MRow
  GAYJKoZIhvcNAQkBFgtmb29AYmFyLmNvbTAeFw0xMzA4MTYxMTQ0MjFaFw0xNDA4
  MTYxMTQ0MjFaMIGEMQswCQYDVQQGEwJHQjESMBAGA1UECAwJQmVya3NoaXJlMQ8w
  DQYDVQQHDAZTbG91Z2gxEzARBgNVBAoMCkJsYWNrQmVycnkxEDAOBgNVBAsMB0Rl
  dlJlZWwxDTALBgNVBAMMBFRlc3QxGjAYBgkqhkiG9w0BCQEWC2Zvb0BiYXIuY29t
  MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQDskC5uCv6eGgZvrXpWJsXz11HK
  POCraWH7QfWEaa/d82SusTVVL2UEqcWhRKHGD3ogikyQ+p4MiCKViYKXG2067nfv
  C+yNUupinb7Bsx/YsUp5zv135fpMXn9rSD/P5LegQONxVqeW5ZoSc3br4JAmYoFq
  uwnNQJl+0AeD7HUjUQIDAQABMA0GCSqGSIb3DQEBBQUAA4GBAKSKibcQgvho0kPU
  E53TWjiVTOxxMzpu2F3/y1McEeOwg0bvTvfoGm3fFJnVM/B1509QgEVenSuO4Am8
  CrF9MCdRA8HJeAw2P7YHSwRgc9nn1HqkqF1McRi+DVCwIfWUFCyD9Wllb5PWPlkD
  voqNLCtuuYRyoIGq+gANBXLOlg1m
  -----END CERTIFICATE-----
  PKCS7 Data
  Shrouded Keybag: pbeWithSHA1And3-KeyTripleDES-CBC, Iteration 2048
  Bag Attributes
      friendlyName: MYALIAS
      localKeyID: D8 CB 15 E1 B3 30 0C 90 C0 57 EB FA A1 D4 20 BB 1C EF A7 40
  Key Attributes: 
  

  I then used blackberry - sign to sign a file bar:

  >> blackberry-signer -keystore selfsign.p12 -sigfile GPACACF -sigalg SHA512withRSA -storepass barfoo -verbose NfcChicken-1_0_0_20.bar MYALIAS
  SF Digest =
  4e 0e 9c 25 a5 2e 0a 1a b9 c0 d2 f8 7c 9e 05 e1
  65 39 eb 92 4e 1d db d8 9d 11 f5 8f 84 b0 92 75
  48 3e 53 40 b6 e3 b9 cc bd 6e 7e 61 95 7b ba d5
  6e b1 76 be b6 c5 d9 a7 ac f3 ad c0 1f fd e7 8a
   Updating: META-INF/MANIFEST.MF
     Adding: META-INF/GPACACF.SF
     Adding: META-INF/GPACACF.RSA
    Signing: native/bar-descriptor.xml
    Signing: native/icon.png
    Signing: native/assets/images/brown_egg.png
    Signing: native/assets/images/Thumbs.db
    Signing: native/assets/main.qml
    Signing: native/assets/sounds/chicken1.wav
    Signing: native/qm/NfcChicken.qm
    Signing: native/NfcChicken.so
    Signing: native/assets/.assets.index
  Info: Bar signed.
  

  If you look at the signed file bar, you can see the GPACACF. SF and. RSA files in the manifesto bar.

  

  If I use the following command

  >>blackberry-signer -keystore selfsign.p12 -sigfile XYZ -sigalg SHA512withRSA
  -storepass barfoo -verbose NfcChicken-1_0_0_20.bar MYALIAS
  SF Digest =
  4e 0e 9c 25 a5 2e 0a 1a b9 c0 d2 f8 7c 9e 05 e1
  65 39 eb 92 4e 1d db d8 9d 11 f5 8f 84 b0 92 75
  48 3e 53 40 b6 e3 b9 cc bd 6e 7e 61 95 7b ba d5
  6e b1 76 be b6 c5 d9 a7 ac f3 ad c0 1f fd e7 8a
   Updating: META-INF/MANIFEST.MF
     Adding: META-INF/XYZ.SF
     Adding: META-INF/XYZ.RSA
    Signing: native/bar-descriptor.xml
    Signing: native/icon.png
    Signing: native/assets/images/brown_egg.png
    Signing: native/assets/images/Thumbs.db
    Signing: native/assets/main.qml
    Signing: native/assets/sounds/chicken1.wav
    Signing: native/qm/NfcChicken.qm
    Signing: native/NfcChicken.so
    Signing: native/assets/.assets.index
  Info: Bar signed.
  

  using a sigfile - XYZ to sign the file bar and the bar file contains:

  

  showing the XYZ. SF and. RSA files added to the clear bar.

  I don't see the error that you notice.

  The documentation notes that this form of blackberry-signer syntax is available only on recent versions of th emost of this command. I ran these commands on the current beta version 10.2 public but it should work with 10.1.

  What version of the SDK yuou use?

• [SOLVED] Problem with the signed key protected api

  Hey guys,.

  I already have a signed key registered with JDE 5.0.

  Just created my first app using the api protected and when I load them into the unit and try to run it, it says the app is attempting to use api protected and does not load.

  What I am doing wrong?

  OK, I just read this:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/8067/645045/8655/8656/127107...

  Send a code signing request to the administration of BlackBerry signature tool

  

  Solved!

• Non-Cisco guy here needs to install the activation key for AnyConnect

  Hello

  I downloaded the key and there seems to be an "authorization key", and below the list of services provides the key

  the serial number of my 5510 and then 5 groups of numbers. I guess that 5 of the numbers 'groups' are the activation key.

  I tried using PuTTY to the console and typed:

  > t conf

  conf >-activation key-->, and then the series of numbers. I assumed that I had to put a 0 x in front of them all, but outside itkind as I

  I put the last number and crushes a little. What is going on?

  Also, we have the ASDM, if I can use it would be simpler. How would I do that?

  Help!

  -ar

  You are welcome.

  Please mark your answers question and/or useful responses.

• Timeline missing options at the bottom, without Peel onion etc...

  Hello world

  Please someone help me here T_T
  I don't know why my edit looks like this ANIMER CC, there is no bar at the bottom, I can't scroll, I don't have options like the onion skin...
  What is going on? I totally freak out. It looks like this:
  
  Whereas it should look like this (Flash CS6):
  
  I really hope that someone can help me. This is the first time in my life, I have never asked for help in a forum, but I am so desperate now...
  Thank you very much in advance!
  SKYROLL85

  Check your display setting scaling. Must be 100%.

• Several threads do a put option on the same key - Concurrency

  HI -.
  
  I have a scenario where I want to combine data from different sources into the bucket.
  
  For example
  
  {mybucket}
  
  key (a common field by source 1 and source 2)
  
  Record Source1
  Record Source2
  
  }
  
  It is possible that both we run charger s1 and s2 charger at the same time. The two Sources have a common key which I had as key in mybucket.
  
  Question is: How can I prevent multiple threads trying to insert the record with the same key. customer 1 could do an insert on the key with the data from the source 1 and client 2 will insert the same key with data of source2. Specifically, I'm looking at a scenario where the key was not present in the cache when two customers tried to get a lock on the key. Because I don't have the key in the cache, how I would lock it. ??
  
  All patterns to manage such a scenario would be useful for me. I thought I read the data once more and check if the data this particular thread has written is available to ensure that the entry was correct. Otherwise, we'd have to lock the entire map, which I think is under optimal.
  
  In some cache implementations, I have seen that we will get the main double exceptions when trying to insert a record with the same key. It would also, but unable to understand if the consistency has a few exceptions like that.
  
  Please suggest solutions.

  Hello

  user779867 wrote:
  Hello
  I think we can use lock mechanishm and have a dummy_init key inserted into the named cache.
  If for any given insert, if there is no lock on the key, and then use dummy_init key to lock and insert the same...
  Kind regards

  Published by: user779867 on October 7, 2010 19:06

  Hi anonymous user779867.

  1. you need not inserted into the cache cache worth to lock his key.
  2. If you use the same unique key in all discussions to lock, then it will be slower than with a single thread without blocking.
  3. using a lock, get + change + sale + unlock cycle is way slower than to do it in a processor input because it involves 3 writing cache (lock, put, unlock) and a cache read (get) compared to one when using a the entry processor-based approach. Entry-processors mean also significantly less traffic collision.

  Best regards

  Robert

• The signing keys and PlugIn Eclipse

  I read that the SignatureKeys are valid for one PC

  I put my 3 signature files to

  c:/rim_signature

  Since eclipse/preferences/BlackBerry Java PlugIn / SignatureTool

  I installed using 'Install new Keys ".

  now, there are a few files under eclipse/plugins/net.rim.ejde/vmTools

  -SignatureTool.jar

  -sigtool.csk

  -sigtool.db

  -sigtool.set

  everything works well for a few months

  just to confirm, a few questions:

  * I can't now other works of eclipse on the same PC

  use "Import existing keys" - so the key can be shared between the Installations of Eclipse n

  If you move to another PC, I

  * Remove the preferences Menu on old PC key

  * then again install PC

  or order another set of signature files and install on two computers

  Am I wrong?

  Hi ΕΚΚΕ,

  You're right, most of the time. The only problem is that remove your key from your old computer will not allow to be installed on the new computer. Keys can only be registered once. If you want to move your ability to sign in a new PC, you can email [email protected] with your request and someone would be able to cancel your original key, then issue a new series on the same account.

  Kind regards

• Problem with the signing key

  Hai guys I have problem with the key signature when signing request l click appears "impossible to ask for signatures until this application with all the necessary powers of signature. any body know this problem? I have send an email to [email protected] no answer not until now.

  * my windows is problem *.

  Thank you

  Well Yes send another.

• [Update November Photoshop] Windows 10. Resizing of the missing options in the properties panel to work plans

  And yet another bug in the new update. On windows, 10 I am unable to change the size of : or Y of selected work plans position. This bug does not appear on the Mac version of the new update.

  Can I change the W and X options. But H and there are grayed out and inaccessible.

  

  Consider adding an option [updated for beta products] in cloud Creative Application settings if the Adobe QA team is non-existent.

  Consider adding an option [updated for beta products] in cloud Creative Application settings if the Adobe QA team is non-existent.

  He is a user of the Forum, so you are not properly addressing Adobe here, even if some employees of Adobe fortunately declined.

  If it is a bug reproducible post a bug report to the wire to

  Community customer Photoshop family

• The product key label is worn and missing two numbers. How can I get back them so I can re - install the software?

  missing numbers

  The product key label is worn and missing two numbers. How can I get back them so I can re - install the software? The hard drive broke down.

  Thank you.

  How to identify, locate, and replace a product key
  http://support.Microsoft.com/kb/811224

• Problem signing key with Chrome Ripple when installing on my Alpha BB10 device

  The signing keys created since Blackberry 10 native SDK Eclipse plugin can also be used to sign applications Webworks HTML 5 under construction of Goggle Chrome Ripple Extension?

  My directory "C:\Users\dev\AppData\Local\Research In Motion" seems to have the files: author.p12, barsigner.csk... etc. But when trying to install on my 'device BB10 Dev Alpha', the server of the ripple is spewing what follows:

  Build completed, now deploy
  ...

  Info: Send request: install and launch
  Info: Action: install and launch

  ...

  actual_id:
  actual_version:
  result::failure 881 missing signatures

  Problem I think was that I had no "Enable Remote Web Inspector" checked and maybe even used the wrong PIN number (confused 0 o) and 8B.

• How many systems can install the key Signature of BB?

  Hello

  Is someone can you please tell me the number of systems can install of Blackberry signing keys? We bought the keys to the eclipse successfully installed in my system. My colleague instala the same keys?

  Thanks in advance

  BlackBerry code signing can be installed on one PC at a time.