Re: Satellite T110-107 will not start in the form of recovery option using the f8 key.
I tried several times and can't get the option of recovering your system by typing intermittently the * key f8 during the startup * as it says in the manual, it will just directly in Windows. I just installed the latest version of the BIOS, but that did not help either. I have no recovery discs, but I would get the f8 problem solved in any case. Everything else works perfectly. Thank you.
Hello
Maybe you didn t press F8 in the right way
You must press F8 immediately after the laptop has been powered!
Press several times to be sure 100%
If this does not work, create the recovery disk! This should be done first before you do anything with the laptop!
The recovery disk is always important and useful if something goes wrong with the HARD drive!
After you create the recovery disk using this drive to put the laptop in the same State as on the first day of purchase
Tags: Toshiba
Similar Questions
-
Satellite Pro L300 will not start after the Bios Update
Help please.
I simply formatted laptop Satellite Pro L300.
I used all the drivers updated Toshiba and everything is fine.I then updated the bios with the latest version.
After this laptop computer is unbootable but continues to scroll through the start menu and any which option to choose it just keeps doing the same.The ides welcome
Hey Buddy,
What start menu, you mean?
I put t understand how it is possible until you wrote that your laptop does not start?
-
Satellite T110-107 does not start
At this machine for a little more than a month, today I reatated it when it became very slow after clicking on restart just off and turns not again.
I get the power light and the wireless light, the HARD drive light lights for qbout 5 seconds then turns off, the fan also works for about the same amount of time.
Nothing appears on the screen at all.
I suspect maybe it is defective.Suggestions for help would be useful.
Thanks in advanceHi mate,
Try this: remove the battery and the AC adapter. Now wait up to 1 hour and then reconnect the battery and the AC adapter. If you start the laptop now can you confirm that it s working now?
If not I think that it s time for an authorized service provider. Sounds like a hardware problem and the technicians can repair this for you! :)
-
Satellite Pro M10 will not start again and comes up with the error message
My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.What can I do to get the notbook again reboot?
Hello
Seems that there are problems with the files of GoBack.
Try to boot in safe mode and remove the Norton System works from your laptop ;)
If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs
Good luck
-
Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
Tried running firefox.exe Pei but error message:XML parsing error: the undefined entity
Location: chrome://mozapps/content/profile/profileSelection.xul
Line 18, column 1:
"< dialog < =" "^ =" "p =" "> < / dialogue >Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.
Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)
-
Laptop will not start without the battery attached
Hello
I have a Hp pavilion dv6700 series (dv6840el) and just, it will not start without the battery attached.
If I plug in the AC adapter, I get some computer activity (fan, noise of the dvd player and HD drive spins) for about 5 seconds, then shuts down.
Once I plug the battery (which is dying, who need a replacement), the laptop starts fine.
So my question is: what is a motherboard or a problem with the AC adapter?
The AC adapter looks ok, however. But if I am considering buying a spare battery, I assure you that I have a new adapter as well.
Thanks in advance.
Hello
Visit this link
Good Luk
-
Internet, not able to browse computers on the network
The computer has internet access, but I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250. Also in the event log Workstation reports: could not load RDR device driver. Cannot run the sfc in safemode, gives the 0x000006ba error, the rpc server is unavailable. Runs under normal windows, noticed in the registry last run: 0x000003e3 error code (try adding c:\windows\system32\drivesr\i81xnt5.sys to the dllcache)I'm puzzled.Hello
I suggest you to send your request in the below link.
http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads
-
My dell optiplex 740 will not start. The screen is black, once it displays the Dell logo. It does not say that the computer is in mode 'sleep'.
- Did you the latest changes on the computer?
- When was the last time it was working fine?
- You receive an error message?
Method 1
See the articles below and check if it helps.
Computer stops responding with a black screen when you start Windows XP
http://support.Microsoft.com/kb/314503
After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen
http://support.Microsoft.com/kb/318027
Method 2
I suggest that you start the computer in the last good known Configuration mode and safe mode, post back with the result.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222
How to start your computer by using last good known Windows XP Configuration
http://support.Microsoft.com/kb/307852
How to fix a computer that does not start
http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start
Method 3
If the computer can boot in any mode, then I suggest that you perform the clean boot procedure and check if it helps.
It is possible that some third-party programs installed on the computer is causing the problem.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
-
Computer will not start at the top. I was first getting a 'file problem' message on nv4_mini.sys. After finding that someone else had the same problem and I responded went to try the solution but then started to get the message that the file: \windows\system32\config\system is missing or corupted. Have tried to do where I could start up in safe mode and cannot. Tried to boot from the installation CD, but when I try to make the system recovery and choose the system to recover nothing happens. This isn't regarding the password. I have a Dimension 4500 XP sp3
Hi BrianJ641,
Follow the steps in the article.
http://support.Microsoft.com/kb/307545
Note: When you are prompted to type the administrator password, you can type if you set the password. If the administrator password is blank, just press ENTER.
-
Vista - computer will not start without the disc
loaded vista on my computer - now computer will not start without the disc
Went into my bios as suggested to check the boot order - and, Yes, I got HDD1 as first boot then CD - but then I remembered something I had seen earlier on my computer - it was on the list the HD which had my system like HDD0 files - so, I checked and there it was - listed option HDD0 so I changed HDD1 of HDD0 and was able to boot my computer without the disk system. Hope this helps someone else with the same prob.
-
Just installed 14 elements, but the editor will not start. The notice appearing - Italian - is: Impossibile find it punto di ingresso della procedure nella libreria di special dinamico C:\WINDOWS\SYSTEM32\MSVCP110.dll _crtCreateSymbolicLinkW
Hello
Update your Redistributable Package VS.
https://www.Microsoft.com/en-AU/Download/details.aspx?ID=30679
-
Photoshop CC 2015 (Norwegian version) will not start. The following message: Adobe Photoshop CC has stopped working. A problem caused the program stopped fungeresom correctly. The program will be closed and you will be notified if a solution is available.
reset your preferences-
Acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html
Adobe media encoder: https://forums.adobe.com/thread/1713540
Legacy: http://helpx.adobe.com/after-effects/using/preferences.html
Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html
Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
InDesign: https://forums.adobe.com/thread/526990
Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
Photoshop: https://forums.adobe.com/thread/375776
Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html
First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
If that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall
-
Satellite A105-S4164 - will not start only white screen
Hi all
I have a laptop Toshiba Satellite A105-S4164 that will not start.I thought that maybe there is a problem with the battery. I took out the battery and then plugged the laptop to the power outlet, makes no difference. The blue lights in the front of the laptop, lights, but I hear no noise from the motherboard or the fan. The laptop is bought in July 2006 and it is out of warranty.
All I see is a white screen.My guess is that the motherboard must be replaced. I have also had kept with Symantic anti-virus and windows updates XP before April 1, 2009.
Thank you for your comments.
Seyed
You can see an image on an external monitor?
Well, I think that in this case the laptop must be verified by the technician for laptop. You should contact an ASP and ask for help. It would be the best way because the technician can be sure what parts are defective.
http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider -
L50 - B satellite will not start when the battery is completely discharged
Hello
My Toshiba L50 - B won't start when the battery is fully drained but connected to the power outlet.
I try to work most of the time on the battery to keep the battery in good shape, but when I forgot to turn off the battery drains and the system will not start when I plug in the adapter.The battery charge indicator is orange light as it should. Only when the battery is fully charged to 100%, it will run at startup and function normally after that. I tried to turn on the laptop several times during the charge cycle, but only when the charge indicator changes from yellow to white it starts. Tested for 2 bodies.
My old Toshiba always immediately turned on when I plugged the adapter even when the battery has been completely drained. Am I missing a setting somewhere?
Thanks for responding... I hope well :-)
Toshiba L50 - B
Windows 8.1
Any standard/original setting since I only acquired this laptop a month ago.The laptop should light up if the power adapter is plugged in and power the laptop corectly any if the battery is empty or during charge.
Please check the version of the BIOS that is available on your mobile phone and compare with the BIOS available on the page of the Toshiba UE driver
Maybe you need to update the BIOS, but to be honest, the history seems really odd to me and I m afraid that there could be some power supply electronic problemSo in the worst case, the laptop must be checked by authorized service provider.
-
L50-A-19N satellite will not start in the BIOS
Hello
I have a problem with my laptop.
I have installed 8.1 and fedora 20 windows.I was in fedora, when I decided to restart Windows.
Instead of grub, I saw message with the error and my notebook has stopped booting.I pressed the power button / stop, he died but when Im trying to start it again, I see the logo of Toshiba Leading Innovation and that's it.
It will not start any further.
I decided to get my system, but when I press F2 or F12, nothing happens.
I can't get into the BIOS!Please, help me to solve it.
Somehow, this seems really strange
I m wondering why you are unable to access the BIOSWhat you can try to do is, remove the laptop HARD drive and switch on and press F2.
From my point of view of the rare even if the isn't HARD drive connected, you should be able to access the BIOS.But for Pierre, I'm not very well your laptop problem is related to the faulty / corrupt Boot partition m
However, your comments would be greatly appreciated
Maybe you are looking for
-
How to change my Apple ID primary e-mail address?
How to change my Apple ID primary e-mail address? The instructions of change of your Apple - Apple Support ID no longer work.
-
Satellite A100 PSAA8: I can type uppercase when caps lock is disabled
Hello (First: I am not good in English because I'm from Holland.) I own a Satellite A100 PSAA8, it used to work very well :)But in recent weeks, I have a weird keyboard problem.I can type only uppercase when caps lock is off and I can't type all numb
-
When you type the text jumps to a random place in the body of the message. This occurs when the mouse pointer is somewhere in the text box. I leave the pointer outside of typing the text box so I don't know where! all ideas
-
We are having a problem installing Microsoft Dynamics CRM 2015. The installer made it through all the screens of the wizard and got to the stage of the installation and was partially the real installation process then stopped to complain that the use
-
I just upgraded my ASA from 7 to 8 and now, my remote access VPN working properly. The tunnels connect and I can ping anything, but I can't browse network shares or connect to Exchange. No idea as to what I'm missing? Thank you Dan