missing resource on windows 7 startup dll

Similar Questions

• missing installation-C:\Windows\system32\HPZidr12.dll file

  HP 1510 all in one deskjet, Windows 7 32-bit, the recent upgrade Vista to Win 7.

  I noticed Solution Center HP indicated that my printer has been disconnected. I've been checking the ink levels, printer was working fine.

  As indicated, I've uninstalled and reinstalled twice. Software seems installed and the printer works. However during installation, I received installation and error message missing C:\Windows\system32\HPZidr12.dll would not be completed. To the left of this Wrapper message was Dot repair 4. Solution Center said HP is disconnected and no pages test works because the laptop and printer are not connected.

  Help, please!

  Travis'

  Sorry it took so long to resolve. Finally, I have installed the file, ran the installation wizard with no luck. I ran the HP Print Scan doctor who says things were OK, still nothing. So ran the patch to Win7 and everything is now recognized.

  I want to thank you for your help, you wre great!

  Connie

• I get the error message at startup missing modul c:\windows\system32\wabqwuny.dll

  what I'm doing. Download this file are what

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• missing windows\system32\nvcp.dll entry window NvSession boot error

  Any help with this. Windows Vista receives this error message, windows\system32\nvcp.dll missing entry error NvSession startup window, during a disconnection. Recently a user's outlook has been removed to solve another problem, and the problem seems to have started just after that. Thank you

  http://pcsupport.about.com/od/findbyerrormessage/a/nvcpl-DLL-not-found-missing-error.htm

  Stages of difficulty c:\windows\system32\nvcpl.dll is missing and c:\windows\system32\nvcpl.dll errors not found

  See if help above.

  See you soon.

  Mick Murphy - Microsoft partner

• on startup, I get this msg that windows\system32\nvspcap64.dll has been missing.how to the difficulty?

  Windows\System32\Nvspcap64.dll happens every time that I reboot. How this can be repaired. Thanks ADotson

  Hi ADotson, follow the steps to solve your problem.

  Start > run > type msconfig > Startup tab

  A lot of startup items listed here. Expand the menu of commands .

  Check the location of your Windows\System32\Nvspcap64.dll

• c:\windows\system32\d11872t14.dll missing file

  Original title: c:\windows\system32\d11872t14.dll

  I got a message saying that this file is missing: c:\windows\system32\d11872t14.dll. . How can I get that back?

  It confuses me again why the MS Answers forum does not prompt for any information system when a new question is asked because we don't know anything on your system.

  You see only this message when you start your system and then good, things work or come to the top when you do certain things and if so, what do you do when you see?

  I did a Google search on this DLL and did not get any results (except your message), which makes the suspicious file.

  If you see the message when you restart your system and then things work very well after that (for example, after clicking OK), I think I do it in this direction:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• @ Startup error: < root Windows > \system32\hal.dll.

  A "highly recommended" malware free program apparently deleted a file system.

  After the reboot, I received this message at startup:
  Windows could not start because the following file is missing or corrupt:
  \System32\hal.dll.
  Please reinstall a copy of the above file
  So the question is... How do I re - install the hal.dll file when I can't start the computer... Download USB?
  Hi thomasm.
   
  Follow the steps listed in this article to resolve the problem:
  Error message: Windows has not start because the following file is missing or damaged

• C:\windows\system32\NvCpl.dll is absent at Windows startup.

  Original title: C:\windows\system32\nvcpl.dll is missing

  Help, please

  C:\windows\system32\NvCpl.dll is absent at Windows startup

  
  

  

  YW antonis10006.

• Cannot start Windows - HAL. DLL missing or corrupt

  I have no idea where to post this thread, I just need help. Please: -.

  I have just changed on my laptop and WINDOWS COULD NOT START because WHAT THE FOLLOWING FILE IS MISSING or CORRUPT \SYSTEM32\HAL. DLL came right on the screen.

  I have no idea what to do, there is no other message, so I'm stuck.

  Someone out there have suggestions or help?

  Thank you

  Hello

  Try to start in safe mode.
  Restart your computer and start pressing F8 on your keyboard.
  Then an advanced boot menu should appear.

  Here, select SafeMode (if possible)

  If this does not work, you will need to use the recovery disk and must recover the new laptop

  But this means that your disk should be formatted and you will lose the data stored on the HARD drive

• Windows 7 d3dx10_.dll file is missing

  Original title: WINDOWS 7. DLL FILE MISSING

  I have a problem when I run this game that an error pops up saying that my d3dx10_.dll file is missing what to do

  can any body help me

  Hey Kevindran,

  What game are you talking about?

  D3dx10.dll problems result in one way or another by a problem with Microsoft DirectX. The file d3dx10.dll is one of many files in the DirectX software collection. Because DirectX is used by most Windows-based games and graphics programs advancements, d3dx10.dll errors usually only appear when you use these programs.

  Here's what you can do to fix the error.

  1. find a DirectX installer on your game folder or installation CD or DVD. Usually, if a game uses DirectX, software developers includes a copy of DirectX on the installation disc.

  2. Uninstall the game and then reinstall it again. Something could have happened to the files in the program work with d3dx10.dll and a reinstall might do the trick.

  To get help, view the required information.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Startup error: C:\Windows\system32\imagxra.dll is not valid

  Original title: C:\Windows\system32\imagxra.dll is not valid

  It appears when I click on anything and while the pc is CONSTANTLY boot on & it will be visible!
  WHAT CAN I DO?

  Hi LumierRodriguez,

  1. Did you the latest changes on the computer?
  2. You have security software installed on the computer?

  Method 1

  Check if the problem persists in the safe mode and after return with the result.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

• Missing or damaged"< root windows > \system32\hal.dll.

  I get the message "Windows cannot start because the following file is missing or corrupt" \system32\hal.dll. It is a Dell computer running windows XP that came preloaded on the Dell. I've been running this computer for years before, without this problem. Can anyone help?

  If the computer is not currently bootable,

  Then, you will need to borrow an xp installation cd to start the computer and run some commands through the function of the CD recovery console.

  Another option, to remove the hard drive and install it as a slave on a functional computer disk.   then use this functional computer and the o.s. to fix the problem on this slave drive.

  Another option is to see if dell experts have a different methodology to fix the error.

  There is a community forum to dell.com dell, where you can ask this question.

  in all cases, the question you have is not uncommon and has been requested and answered thousands of times.

  Here is more information about this:

  http://www.google.com/search?sourceid=navclient&aq=0&oq=missing+or+corrupt%22+%3cwindows+root%3e%5csystem32%5chal.dll&ie=UTF-8&rlz=1T4ACEW_enUS421US421&q=missing+or+corrupt+windows+root+system32+hal.dll

• Error message: missing or corrupted: [Windows root]\system32\hal.dll

  We bought a new pc with Windows 7. My autocad program is not compatible with this op system so I kept the old pc and plan to use it for autocad only. When I tried to boot the old pc, the following message appears: "Windows has not start because the following file is missing or corrupted: [Windows root]\system32\hal.dll.» Any have a solution outside shoot the operator?

  Hi DickBernhardt,

  These articles may help:

  How to fix System32 Hal.dll:

  http://www.ehow.com/how_6184909_fix-System32-HAL-DLL.html

  How to perform a repair of Windows XP Installation:

  http://pcsupport.about.com/od/OperatingSystems/SS/instxprepair1.htm

  How to restore Hal.dll from the Windows XP CD:

  http://pcsupport.about.com/od/fixtheproblem/HT/restorehaldll.htm

  I hope this helps.

• Startup error: the following file is missing or currupt/windows/system32/config/system

  Original title: xp dell 2004

  He said that windows did not start because the following file is missing or currupt/windows/system32/config/system

  Hello

  The article below should help you to start your computer successfully.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Startup error - file is missing or corrupt: windows\system32\config\system

  When I turn on my computer, I get the following error message:

  Windows could not start because the following gile is missing or damaged:
  Windows\System32\Config\System
  You can try to repair this file by starting Windows Setup using the original Setup CD.
  Select the rat the first screen to start repair.

  I can't solve this problem because I do not understand what to do.
  First of all, I put in the recovery CD Toshiba to installation and then I turned on the computer.
  When the Toshiba screen came on I pressed r
  Nothing happened and I was returned to the original error message

  Secondly, I tried holding down c when I turned on the computer because that's what cd said to
  The CD loaded and brought me to a screen that asked me if I had backed up all my files
  I've supported them all upward, only some, because previously there was no problem with the computer and I don't think I have it will re-start.
  I hit not and so I do not know what to do next.

  I can lose everything on my computer, otherwise I'd just re - load windows. What should I do?

  Is anyway for me to back up my documents and then reload everything, or is there a way for me to fix the entire system without erasing it?

  Thanks for your help
  Josh

  I agree with kody. You can try to fix it using windows advanced option menu. Maybe you can also try to repair Windows by using the recovery console. Problem is that this option can be used with Microsoft WXP CD facilities and not with supplied recovery media.

  http://helpdesk.its.uiowa.edu/Windows/instructions/repairinstall.htm