Cannot start Windows - HAL. DLL missing or corrupt
I have no idea where to post this thread, I just need help. Please: -.
I have just changed on my laptop and WINDOWS COULD NOT START because WHAT THE FOLLOWING FILE IS MISSING or CORRUPT
I have no idea what to do, there is no other message, so I'm stuck. Someone out there have suggestions or help? Thank you Hello Try to start in safe mode. Here, select SafeMode (if possible) If this does not work, you will need to use the recovery disk and must recover the new laptop But this means that your disk should be formatted and you will lose the data stored on the HARD drive Tags: Toshiba Satellite Pro A60: Windows XP cannot start isapnp.sys driver missing or corrupt I had a Satellite Pro A60 for about 3 years without problems. Last week Toshiba touchscreen developed vertical lines of the bleeding and I got error message "Windows XP cannot start because of the missing or damaged driver isapnp.sys. I tried using the recovery disk, but it loads OK, but it fails to make a difference. Hard drive seems to work OK as slave to another computer. No matter what wil suggestions appreciated! Thank you Found this Microsoft Knowledge base article: http://support.Microsoft.com/kb/315311/en-us/ Can it help It is the Dialogue I am presented after each attempt to launch Adobe Edge animate CC 2014. "EdgeAnimate.exe - system error." "The program can't start because the C:\Program Files (x 86) \Adobe\Adobe edge animate CC 2014\cef\d3dx9_43.dll is missing on your computer." Try reinstalling the program to fix this problem. » I have re-installed edge animate several times now, even computer rebooting between installs. For some reason or another, whenever animate Edge is installed, this particular "d3dx9_43.dll" file will not be installed with. What can I do? I use Animate frequently enough that this will become a problem if she cannot resolve it quickly. Help, please. I thought about it. I just had to find my computer 'd3dx9_43.dll', then copy of System32(not cut) in the right folder edge animate. There is no need to reinstall or restart. I already had the latest version of MS Direct X installed, so all that was left was to have the file copied to the correct folder. Edge animate works now stellar. Message... BRS .exe program cannot start because msvcp71.dll missing. pls help. am under win 7, 64 bit. had something to do with HP 3 in 1 printer to the PC by using remove normal within devices/printers, as it had played all of a sudden, with difficulty (failed) reinstall removed! a centuries-old HP drive for my system!, costumes to previous win and also not taken in charge now. also ran a file temporary cleaning via system tools and defragmented. wake up message now on start... as above. a scanner sfc, not found any internal breach. What is brs exe? and the dll file can be found somewhere in the SP and installed, which it is, why it is absent? reviewed 1 addictivetips.com solution proposal. also found 1 suggestion to peer into MS Visual C ++ redistributable. Looks like once your out of warranty free very little real bug and help $free is available. Thank you. MG. msvcp71.dll is not a Windows file, it is a Visual Studio .net file and it is distributed by software vendors, you can have different versions of the file in the directories of different programs. John I'm trying to set up parental controls for my son. I get this error at all times and must go to the process in the Task Manager to get the message to stop appearing. I installed twice things of all Live essentials - all of them even if I don't want or need all - and still get this error message. When I go to the website of parental controls and select WLFS in the box for additional controls and then click user account from my son a pop-up message appears and disappears so fast, that I do not see what is the error message. How can I fix it? Thank you Original title: program cannot start because wlidcli.dll is missing. Try reinstalling the program to fix this problem. Hello It is possible that you setup parental controls are corrupt. To resolve this issue, follow these steps: 1. Uninstall Essentials by using the CMD line parameter. Please follow the steps in this link: How to uninstall Windows Essentials through the CMD line parameter 2 remove the Windows Live folders on the following directories: C:\Program Files\Windows Live
Note 3 reinstall Windows Essentials. Please refer to this article for the download link: Thank you! Outlook cannot start because DCIMAN32.dll is missing Whenever I want to open Microsoft outlook the following textbox is displayed. * The program cannot start because DCIMAN32.dll is missing on your computer. Try reinstalling the program to fix this problem *. Then when I click ok, Outlook opens. Also when you use Internet Explorer, the window open flashes quickly, any suggestions? Thank you for your help Hey,. And have you tried to reinstall Outlook, such as mentioned in the error message? Computer HP laptop windows didn't load because the HAL is missing or corrupt I have a HP Pavilion dv6605us Windows Vista Error message I get is: File: \Windows\System32\hal.dll Status: 0xc000000f Info: Windows could not load because the HAL is missing or corrupt The changes that I do is I did a clean install of Linux deleting all partitions including the HP recovery partition. Now that I have to go back to Windows, I used the recovery disks that I did when I bought the laptop. It took about 24 hours to completely install, then I got this error message when you restart. Help, please Best thing to do is to nuke the drive,then reinstall Vista again. I know it's a long process, but you should get back to run. Linux makes strange recovery partitions does not understand and they are deleted correctly, boot and nuke will take care of it. I get an error message: "the progran cannot start because DEVOBJ.dll is missing on your computer. When I start my computer my screen is all black and the message says 'the progran cannot start because DEVOBJ.dll is missing on your computer. Try reinstalling the program to fix this problem' I don't see even the Start button if someone knows what's going on please help. Take a look at the following: I would also like to launch a full scan with your antivirus The program cannot start because MSVCR80.dll is missing on your computer. Hello If the problem is with iTunes, uninstall everything according to the instructions from Apple: «Remove and reinstall iTunes, QuickTime, and other software components for XP» http://support.Apple.com/kb/ht1925 It is also the same list of what to remove what is in the link above from Apple: http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm Or try this program to remove it: http://www.revouninstaller.com/revo_uninstaller_free_download.html "Resolution of problems with iTunes for Windows Update" https://discussions.Apple.com/docs/doc-6562 If the advice already given does not, please contact Apple for assistance. "Not to install iTunes or QuickTime for Windows" http://support.Apple.com/kb/HT1926 "iTunes support-how to use iTunes. http://www.Apple.com/support/iTunes/ "Contact iTunes Support. http://www.Apple.com/support/iTunes/contact/ Or ask in the community Apple iTunes: https://discussions.Apple.com/community/iTunes ____________________________________________ If the problem is not with iTunes, there is other information about this error on the link pcsupport. See you soon. test of strength of dirt the program cannot start because OpenAL32.dll is missing test of strength of dirt the program cannot start because OpenAL32.dll is missing Hello Did you change your computer before this problem? You can follow the suggestions and check out them. Method 1 Check to see if the problem exists in a clean boot state. How to configure Windows XP to start in a "clean boot" State http://support.Microsoft.com/kb/310353 Note: after you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally. a.Click Startand then click run. b.Type msconfig and then click OK. c the general tab, click Normal Startup - load all device drivers and services, and then click OK. d.When you are prompted, click restart to restart the computer. Method 2 If the problem exists, you can uninstall and reinstall the program. How to change or remove a program in Windows XP http://support.Microsoft.com/kb/307895 Note: Make sure you have the installationd disk before you uninstall the program See also: How to manually remove programs from the add tool / remove programs http://support.Microsoft.com/kb/314481 Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article. How to back up and restore the registry in Windows XP Hello Hello http://support.Microsoft.com/kb/314477 I hope this helps. Just reply to the results. "windows failed to load because that layer HAL is missing or corrupted" my laptop wont even start in safe mode because of "windows failed to load because the HAL is missing or corrupt" I don't have my software for my laptop. Help before that, I had problems to my laptop with windows startup, it worked in safe mode. Hello I suggest you follow the below methods that can help you resolve you issue. Method 1: Boot into the recovery console. Run "chkdsk/p". to check for errors. If errors are found, then run "chkdsk/r". Do follow link below: http://support.Microsoft.com/kb/315265 Reboot to see if the problem is resolved. Method 2: 4. when the "Enter OS Load Options" appears type "/ fastdetect" and press "Enter." 5. close the recovery console to see if the problem is resolved Refer to this link: http://support.microsoft.com/kb/314058 The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem. I get following error when I try to open the computer management in windows 7, the error is as follows. The program cannot start because MSVCR100.dll is missing from your computer. Try reinstalling the program to fix this problem. Where can I find this dll file and help me to download and install. I'd install the Microsoft Visual C++ Redistributable dll, which is necessary for the projects generated with Visual Studio 2010. Download the files below according to your operating system version. I would setup versions because they may be needed for different programs. Check in programs and features, you show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here. Package redistributable Microsoft Visual C++ 2008 (x 86) Microsoft Visual C++ 2008 SP1 Redistributable Package (x 64) Package redistributable Microsoft Visual C++ 2010 (x 86) Package redistributable Microsoft Visual C++ 2010 (x 64) Thank you Marilyn Program cannot start because MSVCR71.dll is missing I have Windows Office home and Student 2007 and a 64-bit system. When you try to open a pdf file in Windows Live Mail, I received this message: the file does not have a program associated with it for performing this action. Install a program or, if such is already installed, create an association in the default programs control panel. The program cannot start because MSVCR71.dll is missing on your computer. Try reinstalling the program to fix this problem. In addition, after trying to update Adobe Reader, the update has failed because of lack MSVCR71.dll. Where and how can I get this file missing? You may need to resave MSVCR71. DLL or scanner and update/replace it. This will take a few minutes. A clean update system should bring back something that looks like this: C:\>sfc/scannow Could you try it and report the results? HP Photosamart Premium: the program cannot start because hpqcutil.dll is missing I've had my printer for quite awhile. Recently I had to download as because wireless USB port would not work. I've used it since, but yesterday, I changed two cartridges. Once I tried scanning photo and save it I got the message: the program cannot start because hpqcutil.dll is missing from the computer. Try reinstalling the program to fix the problem. I reinstalled again today and still get the same message. How do I now please? HP Photosmart Premium 309 Lyn PS my system is Windows 7. 32-bit. You don't need the installation disc at all. Discover the second option in my last post, where you can download the airline pilot, I posted for you as well. Once the download is complete, installation begins, for now, cancel the installation and start following the steps in the second part of my last post, and that will help you perform the uninstall of level 3. Good luck How can I put a page on the tab for quick access page When I open a tab there are 9 pages displayed I can go, I locked all but one. Is it possible that I can put the page I want in this place? will not open several tabs from previous session start Upgrade to the latest version. He still asks about closing multiple tabs when Firefox is closed, but, initially up to automatically opens these tabs. I don't want to have to use 'restore previous session' every time. This does not work when another p After a restart/virus scan (after the large recent Windows Update Microsoft), I see on the background one right part of my screen: Windows Vista (TM) Build 6002 this copy of Windows is not genuine. I looked at the system screen and it shows only: Win BlackBerry Bond display e-mail and the e-mail folders Constant Contact e-mails are not optimized on-screen Blackberry jump so I have to manually shrink in order to read them. I've heard the same complaint from a regular Blackberry user. Constant contact said that their e-mail templates are designed to Norton Antivirus blocked by group policy? Norton Antivirus blocked by group policy? Just removed Trojan:Win32 / AgentBypass.gen! K (I think) with microsoft sucurity essentials but norton always blocked file, it's a thing of adjustment or I still have a bug?
Restart your computer and start pressing F8 on your keyboard.
Then an advanced boot menu should appear.Similar Questions
You receive a "Windows didn't start because the following file is missing or corrupt: Isapnp.sys" error message at startup
C:\Program Files\Windows Live Files\Fichiers
The System Configuration utility dialog box appears.
My laptop is not at all start. It is just coming up with the error message "windows root>\system32\hal.dll. missing. Please reinstall a copy of the above file.
Everything I can find on the web so far tells me to reinstall via an XP CD. My version of xp was preinstalled, because it's a computer dell laptop.
Can someone help me?
Please take a look at this article and follow the steps in troubleshooting bottom of the page.
Total identified Windows installs: 1
[1] C:\Windows
Add installation to boot list? (Yes, no, all)
Press on "y" then "enter".
When "Enter load identifier" appears, type the name of the operating system (this name is arbitrary and it is just a label for the found installation) and press "Enter."
Package redistributable Visual C++ 2005 (X 86)
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
Visual C++ 2005 (x 64) redistributable package manager
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en
http://www.Microsoft.com/download/en/details.aspx?ID=5555
http://www.Microsoft.com/download/en/details.aspx?ID=14632
Start scanning system. This process will take time.
Start of the phase of verification of the scanning system.
Full check of 100%.
Windows resource protection did not find any breach of integrity.
Maybe you are looking for