missing runddl32.exe file?

Similar Questions

• my missing snd32.exe file

  IM missing my snd32.exe file. also, my volume icon in try. Ive tried all that can not find the file, no sound on my windows xp. need help ASAP!

  Hello

  Try the procedure described in the following article and see if it helps.

  Volume icon is not displayed in the notification area, and you may receive an error message when you try to add it.

  http://support.Microsoft.com/kb/319095

• Qosmio F20-153 - ntoskrnl.exe file missing

  Hello

  I have an almost 5 year old toshiba Qosmio F20-153, which has developed an error with the Windows message root>\system32\ntoskrnl.exe file is missing.
  I wonder if it's fixable without completely re - install the complete operating system that I still have the Toshiba restore disk.

  Any help much appreciated.

  Hey Buddy,

  In my view, your only option is recovering the entire notebook. The Toshiba Recovery disk only contains an image of factory settings, which means that you can t install this single file of this disc.
  In addition it s a good idea to reinstall Windows from time to time. If your installation is already 5 years old, you should do this. You will be surprised with the speed of your laptop is after that. :)

  Use the recovery disk is quite simple: you must boot from that disk and follow the instructions on the screen. You do a few clicks only and that s it!

• the csrss.exe file is missing

  I was downloading addons for a game on the internet and then later the next time I turned on my computer, it said I was missing the csrss.exe file and so I searched for it looking to see if I somehow accidentally moved and he didn't so I was wondering if there is anyway I might get this file without reformat my computer and reinstall windows xp

  How can I get a new file csrss.exe

  MD5: f12b178b1678d778cfd3ff1fc38c71fb

  SHA1: d9aa29288951e94773caa1054237d29734e79f34

  SHA256: 42a7aeb7d7056d583b620993f733d259b78600aab2c9b95e58d437a6401c79b1

  ssdeep: 96:1NlAN1CnotgbZm4vU / 93SqYs5FEW5B8enWwG:1NlANooygp/ZSq/5eW5B8enW

  File size: 6144 bytes

  This confirms my suspicions you have (or had) malware. This version of csrss.exe is for service Pack 2 of Windows XP.
  You really need to run MBAM.
  But despite this, if you run at the SP2 level, it is unclear what might make its way onto your PC. There are some out there extremely difficult to detect rootkits. You find you might need to perform a clean installation. If you would rather fight infection, you can always look for guided help:
  http://www.bleepingcomputer.com/forums/forum103.html

• How can I get the print spooler to start when the file is missing: lexbces.exe? where can I download this file?

  I TRIED TO RE-INSTALL MY HP WIRELESS PRINTER AND IT WOULD NOT INSTALL. I HAVE RECEIVED AN ERROR MESSAGE THAT THE PRINT SPOOLER WAS NOT WORKING AND STOPPED. I have TRIED TO START THE PRINT SPOOLER AND FOUND what IT MISSING THE lexbces.exe FILE. I THINK THAT WHEN I UNINSTALLED THE HP PRINTER, HE WALKED OUT OF THIS FILE. IT IS IN THE SYSTEM 32 AND A FILE OF REMOTE PROCEDURE CALL. DOWNLOAD THIS FILE OR DO I HAVE TO RE-INSTALL WINDOWS XP?

  Lexbces.exe is from Lexmark (or Dell-badged Lexmark) printer install.  When the Lexmark printers are installed, they configure the print spooler to depend on Lexbces.  Unfortunately, when you uninstall the software Lexmark, the uninstall program removes the file but does not have the print spooler dependency.

  Open a command prompt window (start > run > cmd > OK)
  Type the following line in the black command prompt window and press enter

  dependent on the spooler of sc config = RPCSS

  Note that there is no space before the = but there is a space after it.

  Restart the computer.

  See the instructions on One Article to do a clean installation of your printer.

  After the restart, you can check that the print spooler has started in several ways.  One way is:

  Open a command prompt window and type the following command, and then press ENTER:

  spooler request SC

  You should see the following in the command prompt window:

  spooler request SC

  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

• Problems with the sound on my PC (i.e., no noise at all). m ' said that the Sndvol32.exe file is missing

  I have problems with the sound on my PC (i.e., no noise at all).  He told me that the Sndvol32.exe file is missing.  I went through the 'fix - it' and the solution is to extract the file from the Windows XP CD.  My PC did not come with it - otherwise, how can I get this file?  Thanks in advance!

  Most of the people do not have a genuine XP bootable CD.   This is good advice if you have a true bootbale CD, but given that the majority of people have never seen one in their life, why start there?  That's why this kind of troubleshooting tips kill me...

  The fix it will not help you.

  This will help you:

  I downloaded a copy of the file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.

  You have to put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

  Of course the file must never be missing, so something has badly haywire.

  If the system is working properly, what do you think has happened since the last time, that he did not work properly?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  No matter what you use for the antivirus/antimalware protection, I followed with some other respectable malware scanners, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Ntoskrnl;. exe that is missing or corrupt file error

  I have a laptop with a ntoskrnl;. exe file that is missing or corrupted and cannot rebuild or load from cd, can I download this file somewhere, or what I can do to re - install this file and how?

  Hi WEBERSCHLOTZSKY,

  1. When you receive the error message?

  2. did you of recent changes on the computer?

  3. what happens when you try to copy the file from the Windows XP CD?

  There are several reasons for this error message to occur.

  This problem is often caused when the boot.ini file is missing or misconfigured. This problem often occurs when a user has recently added or removed from an operating system on the computer or added or deleted hard disk drives in the computer.

  If you are unable to start Windows and the error message then consult the below Microsoft article and try the steps mentioned, check if it helps.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

• MS Office 2013 missing EXE files

  I just installed a Seagate Backup (purchased from Dell) Plus drive on my XPS 8.1 Win system.  Installed SW of backup supplied with the player.

  Now I can't open MS Office 2013 applications (Outlook, Excel, Powerpoint), but no problem with any other application installed on the PC.

  Location of the file checked programs icons to point to and .exe files are missing! (FYI, this is c: Program Files > Microsoft Office 15 > root > office 15 > OUTLOOK.) EXE, etc.)

  Now that I think of it, I had a Windows Installer update automatically yesterday, which may have caused the problem.

  Someone at - he saw this problem, and is my only solution to reinstall the applications?  I don't like this major corruption occur for unknown reasons.  Who knows what else is hidden here?

  Thanks, Nadine,.

  I just went ahead and reinstalled Office, which worked well.  Not know what caused the problem; the mod only SW was the update of windows. Solving the problems of Update site corrected MS 2 'mistakes' in the previous version. No idea why, but everything clear now.

• I downloaded 3 files from Adobe for CS3, but one of the .exe files cannot be due to due to a (file archive part missing, all parties must be in the same folder message)

  Please help, I downloaded 3 files from Adobe for CS3, but one of the .exe files cannot be due to due to a (file archive part missing, all parties must be in the same folder message)

  Hi Francis,.

  Make sure you download both files from there. https://helpx.Adobe.com/Creative-Suite/KB/CS3-product-downloads.html

  Compare the size of the file and you will have to perhaps disable all anitvirus during download and install it.

  Thank you

  Scott

• Exe file missing

  I don't know how to respond to the message sent from Millennium, but it was discovered, I was conquered by Adobe Photo shop for Mac OS and not for Windows, that's why my exe file was missing.

  An easy way to reply to the message is to visit the forum and find/access your assignment and post a reply to any message you want.

• I am trying to reset windows xp back to the original settings, but miss me the winnt32.exe file. Where can I go to get the download

  I don't have a winnt32.exe in the i386 folder. My computer behaves very strange sometimes. It drags, freezes and load things on that I do not click.

  You can download SP3 from HERECOMPUTER. Save it to your desktop. Use an extraction of files such as WnRar software to extract the service pack 3 you downloaded to extract the files in the C drive. Once the files have been extracted, click Start > run and paste the command below > click Ok. This should install the recovery console.

  C:\\i386\winnt32.exe cmdcons

  In addition, the i386 folder will contain the winnt32.exe file you requested.

• Rundll32.exe missing, unable to reinstall open rundll32.exe or .exe files

  Then I looked around and discovered I had a virus, XP Security, erased rundll32.exe when it was faded.  Now, I found another copy on my computer to ISO recovery that accompanies it (thank you, MSI), but it is useless, because I can't OPEN. EXE FILES.  I had internet explore to open internet Explorer by selecting in the menu open with that appears whenever I open a .exe file, and that worked for a few other programs (World of Warcraft, as well, mainly to test).

  So, what should I do to open Rundll32.exe when my computer won't let me choose Rundll32.exe as a program to open Rundll32.exe with.  I select it in the open with menu by means of travel, and it does not appear in the list of programs that I can use, such as Internet Explorer and wow.

  I wanted to talk to someone on the phone for 5 minutes to understand this point, but that costs 20% of this cost my computer ($50, im on a netbook).  Come on, $ 50?  really, microsoft?

  Thank you for your response. Here's my problem. I'm on a laptop at the moment. My problem is with my desktop windows xp home edition. I can't access a Web site or make it appear an address bar imput your link. Whenever I click on internet explore or itunes or whatever it is that must be open to the top, I get the 'open with' box and it says: "choose the program you want to use to open this file. I tried to remove the rundll32.exe and go back in the folder.

  When I go to the c\windows\system32\rundll32.exe folder and remove the file, I go back to the results of the research, and he returned in the results of research after a few seconds.

  Thanks again.

  The goal is to not do not delete the rundll32 permanently, but replace it with a replacement valid. If your MAP replaces the file then it is useless to continue to delete.

  That said, the best way to solve this problem is to use a flash (USB drive) drive or other removable media to download and run the file on the link I gave you. However, if you do not have access to removable media, you can try to manually reassociate the executables.

  CTRL-ALT-DEL and open Task Manager.  Once there, click file, and then hold down the CTRL key and click New task (run).  This will open a command prompt window. On the command line type assoc.exe = exefile > press ENTER. You should receive a prompt action succeeded.

  Looks like your shortcuts can have been so separated. On the command line type assoc.lnk = lnkfile > press ENTER.

  Click on the link below, download, update and perform a full scan with Malwarebytes.

  Malwarebytes.org

  How to use Malwarebytes

• Windows Vista cannot open .exe files and rundll32.exe are missing and are not accessible.

  Windows Vista cannot open .exe files and errors occur with rundll32.exe.

  http://www.Winhelponline.com/articles/105/1/file-association-fixes-for-Windows-Vista.html
   
  Get the patch exe file by clicking on the page and choose Save target
  As. Can you double click it? Otherwise you can start
  c:\windows\system32\regedit.exe find and right click on it and choose
  Run as administrator. Does this work. Otherwise copy regedit.exe for your
  Desktop and rename the regedit.com. You need show extensions to rename.
   
  That's what help said to show extensions.
   
  Show or hide file name extensions
   
  A file name extension is a set of characters added at the end of a file name
  determine which program should open it. Follow these steps to choose
  If Windows displays these file extensions.
   
  Click to open the Folder Options (in Control Panel).
   
  Click on the view tab, and then, under Advanced settings, do one of the
  Next:
   
  To hide file extensions, select hide them extensions of known file types
  check box, and then click OK.
   
  To view file extensions, clear hide them extensions of known file types
  check box, and then click OK.
   
  Start Regedit, menu file - import and import the downloaded file.
   
   
  --
  ..
  --
  "Leecherous" wrote in message news: 9a998a10-f4f6-433 a - 9 b 55-c051da91f152...
  > Windows Vista cannot open .exe files and errors occur with
  > rundll32.exe.
   
   

• failure to launch the .exe file missing from Lightoom 6

  I downloaded Lightroom 6 twice now, because it does not start from the shortcut.  I can't find an exe file in the Program Files to launch directly.  Otherwise, anyone having this problem or have a solution?

  I am answering my own question... you must first log out of creative cloud and then reconnect.  Don't know why, but it works.

• Application Builder Question: How to get several .exe files in one version?

  I am trying to release a LV 2010 application composed of a high level VI (Main.vi), and a number of dynamically called live contacting one using functional global variables (and a few classic global variables).

  One of the dynamic subVIs (Second.vi) can in fact be used independently of Main.vi (and often will). I wish it were available as a .exe, but I would like to be able to communicate with Main.exe if is started after Second.exe. Is - it somehow possible?

  It seems to me that I must write two screws as independent applications (and release them as such, but in the same folder of the application) and find another way to enable the exchange of data between the two (which, I have no idea). Is there an easier way, I'm missing? The two screws as high level screws in the Build specification will do almost what I want, but not quite, since it in order to open the two screws little important if I want to run only the Main.vi or Second.vi only (and of course only show the single .exe file in the application folder).

  You could do this by using the arguments passed to the exe.  This document gives an example "past of Arguments to a LabVIEW executable".  I just think, you can create shortcuts in the Application Builder, but you will need to generate them buy a post running installation tool.

  Jason