"Mistake to make" during compilation

Similar Questions

• Files generated during compilation

  There are a bunch of files that are generated during compilation of an application.  What do these files and what are they for (I'm a noob)?

  . COD - I guess that's the application?  Even if it seems to be a ZIP file.

  .jar - I don't understand the purpose of this file?  What is the purpose of this file, if we already have the .cod file?

  . CSO - what is it?

  .jad - I guess that it is a manifesto of a certain type?

  . CAP - another show of a certain type?

  Any guidance would be appreciated.

  Thank you.

  . COD - it's the application.  If it is a ZIP file, which means that you have a large application and it exceeded a limit of size of the code, in which case, the compiler packs individual cod in a single ZIP file for easier management.  Search the Forum by using the term brother for details

  .jar - this is the standard version of java of the compiled application.  So cod files are RIM reconditioning it.  Can you recreated your COD form this.  In addition, for applications 'Library' that are used by other applications, you can 'import' of these and thus reuse the same library.

  . CSO and others.  Used by the signing tool to determine what signatures you need to get

  .jad - this is the file that you use for the installation of Over The Air (OTA)

  . CAP - never looked at that file, believing it is the form of the output of the compiler CAP, which is used for the compilations,

  You can find more information on the latter in the developer's Guide.

• COBOLs in PSOVM - psrun.mak error - compiling "cob64: cannot run Id.

  Hi all
  After the installation of PeopleSoft LMOS on our server, I need to recompile the COBOL. In my view, that it is not included in the LMO. Here are the steps that I did.
  1 Server chip Express 5.0 WrapPack 4
  2. follow the steps of compiling Cobol on Unix mentioned is the guide to PeopleTools_8.50_Installation_Oracle.
  I have successfully compille COBOL files by running. / pscbl.mak. The next step is to connect COBOL on UNIX components in executant./psrun.mak and here, I get the error:
  
  +./psrun.Mak - link PSRUN for oel-5-x86_64, Version 2.6.18 - 92.0.0.0.1.el5xen... +.
  +./psrun.Mak - error (s) encountered creation PSRUN! +
  +./psrun.Mak - see /opt/oracle/psft/appbatch/tools/setup/psrun.err for messages.
  +[root@pshcm91ab setup] # /opt/oracle/psft/appbatch/tools/setup/psrun.err+ more
  cob64: cannot run ld
  +[root@pshcm91ab of installation] #+.
  
  I followed all the steps mentioned environment variable definition in the "compilation on Unix Cobols' in PeopleTools_8.50_Installation_Oracle.
  
  Is there a specific documentation of compilation COBOLs in PeopleSoft LMO?
  Can someone help me with this?
  Thanks in advance.
  -Chris
  
  Published by: user9977167 on 02/04/2010 15:52
  
  Published by: user9977167 on 02/05/2010 06:18

  Chris,
  Yes, on my side, I had a copy of each CD of OEL5.2 x86_64 disc downloaded from http://edelivery.oracle.com/linux
  Who is right for which I have also shown what CD I took the different packages (as far as I know, for your problem, only the first 3 CDs are required).
  I have indeed created an entry in my blog here about it, it was an interesting exercise, even though I'm not sure Peoplesoft LMOS App/lot was built to run the Cobol.

  Nicolas.

• Error during compilation of package header and the body - How to change pkb file associat

  Hello world
  
  It has been noticed elsewhere (in the thread "package for compilation and body header" January 12, 2010) compiling the scripts package sometimes fails (apparently due to a bug in sqldeveloper) when the script contains the trailing slash /.
  
  This bug is still open?
  
  Question: in the thread mentioned above, it is recommended as a workaround to change the association of corresponding file from pl/sql to sql type. I want to do; I know the place in the Preferences dialog box, but most associations seem to hard-coded and cannot be changed.
  
  I would appreciate ideas!
  
  Thanks in advance,
  
  user8632123.

  For the workaround: you need to change the extension of the file , not the association (for example, .sql).

  Have fun
  K.

• X 5 crashes during compilation HTML

  I searched through the forum for my problem, but if some are nearby, none reflects the situation I met recently. I work with RH X 5 in a Windows 2000 (Windows 5.00.2195, with Service Pack 4). In October, everything worked well. Because of the older development environment that is used in our society, I'm limited to generate HTML compiled as the help output. This worked well in October of last year, but now HR crashes when compiling the help file.
  
  I watch the compilation process. It seems to happen all content and media files. I find myself with a '! chm_tmp_folder_0' file which seems to contain everything that I will need the .chm file. But about 30 to 40 seconds, once the "ehlpdhtm.js" step in the build process, he started in the "Transformation of keywords... "the generation dialog box disappears, HR is not refresh and it then closed without comment after a few seconds. I find myself with the aforementioned tmp folder and a .chm file that seems to be the right size, but when I try to open it, I get a "Cannot display page" message.
  
  I moved the project folder in a folder with a short file name just off of the root of the hard drive and tried to run again. The same problem. I upgraded version X5.0.2 (I had been in X5.0.1) HR... his problem. I checked that Comcat.DLL version 4.71 or higher, as suggested in the tech note rb_10293, checked all the URLs of had the slashes to appropriate web addresses, checked, I had an appropriate default section and the window, and then I tried the trick of removing the .xpj file and the project to open the .hhp file. It always crashes when I try to generate the system compiled HTML help, exactly in the same place every time. (Oh and multiply the frustration: outputs WebHelp Pro and FlashHelp all printed Documentation generated successfully.)
  
  Any ideas why my project crashes like that?

  I gave up trying to find the source of the problem.

  I started a new project to HTML help, copied on all subjects. Update. Success. Copied media files. Update. Success.

  I did this step by step for: terms, DPE, OCD, window design, ssl settings. So I'm about 95% back to where I was before all this started, and I have all my new topics and content in place. I guess I'll just work here as if it never happened. I'm a bit wary of adding index keywords, because I have a sneaking suspicion that it was the source of my troubles, but I have no idea why this would be so.

  In any case... Thanks for the help, Colum, Leon.

  Kind regards
  -Jay

• Warning during compilation

  I get this warning message "the type selector 'Label' has not been treated, because the type was not used in the application.
  
  It's weird I have three labels specified. I have two paintings with labels and a button with a label. I get the warning message, but it does not show me where is the questionable code. He tells me that it is in the file containing the two paintings using the label, but that's all. I tried to clean up the project to remove this error, but I still get it. I even deleted all three of my labels, cleaned the project and I still get the message. Any ideas on how to remove this message, or better yet what is the cause?
  
  Have an ordinary day...
  KomputerMan ~ |  :-)

  A "selector type" refers to the CSS. Somewhere, you have a style like this:

  {Label
  ...
  }

  And I think it's telling you that the style was not used anywhere. Although I don't know why he would complain if you use components of the label. :-/

• Unable to use Movie Maker 2.1 to make my own video compilations of my videos converted families (converted with USB 2.0 TV BOX - InterVideo WinDVR).

  I use a USB 2.0 TV BOX (its software is "InterVideo WinDVR") to activate my old family videos VHS and DVR (VCR/DVD via RCA cables drive) of video files.

  The files are anywhere from 4 or 5 MB .5MB (mainly), with one or two files like 7MB, depending on the family event.

  Once I created the new video files, I have no problem to watch with Windows Media Player (and they look beautiful, as there was almost no loss of photo quality and or sound in the transfer at all - very very nice).

  Then I will import the video clips/files newly created in Movie Maker (I have Movie Makers version 2.1). in order to make new compilations video, eager to add effects and transitions and music in Movie Maker.

  The newly created files seem to import no problem... but when I try to preview... the sound plays very well but there is no video... only in black on the preview screen (the few times I tried this I had to close Movie Maker).

  I tried moving them dirrectly to the timeline and then see them and play a clip, but then when I clicked the back button to replay the same thing above occurs, black in the preview with sound window.

  I did some reading online to try to understand, and...

  I tried to import the file/clip directly on the timeline and then finishing/recording on my computer and then importing the wma file that results, but the same thing, black with sound.

  What am I what am I doing wrong or what do I need get this working... grandmas are starting to nag... lol

  Thanks a lot for any help or advice anyone can offer me, time and review.

  Dagtall

  Once again...

  I use USB 2.0 TV BOX to convert my analog video to digital, it's a software is InterVideo WinDVR, using the automatic setting 'Best' for "Record quality", which says that the files are converted to...

  Cut paste &:

  Format: MPEG-2
   
  Audio:
  Format: MPEG-1 Layer II
  Sampling frequency: 44.1 kHz 16-bit stereo
  Bitrate: 224 Kbps
   
  Video:
  Size: 720 x 480
  Frame rate: 29.97 FPS
  Bit rate: 7200 Kbps
   
  Total:
  Bitrate: 7715 Kbps
  File split size: 4063 MB.
  Total record time: 2257 minutes

  I am runing Windows XP Home Edition version 2002 service pack 3, with a Pentium 4 CPU 3.20 GHz, 2 GB Ram. My video card is an e-GeForce 9600 GT superclocked edition DX10 ready 512DDR3 PCI-E.

  I use a USB 2.0 TV BOX (its software is "InterVideo WinDVR") to activate my old family videos VHS and DVR (VCR/DVD via RCA cables drive) of video files.

  The files are anywhere from 4 or 5 MB .5MB (mainly), with one or two files like 7MB, depending on the family event.

  Once I created the new video files, I have no problem to watch with Windows Media Player (and they look beautiful, as there was almost no loss of photo quality and or sound in the transfer at all - very very nice).

  Then I will import the video clips/files newly created in Movie Maker (I have Movie Makers version 2.1). in order to make new compilations video, eager to add effects and transitions and music in Movie Maker.

  The newly created files seem to import no problem... but when I try to preview... the sound plays very well but there is no video... only in black on the preview screen (the few times I tried this I had to close Movie Maker).

  I tried moving them dirrectly to the timeline and then see them and play a clip, but then when I clicked the back button to replay the same thing above occurs, black in the preview with sound window.

  I did some reading online to try to understand, and...

  I tried to import the file/clip directly on the timeline and then finishing/recording on my computer and then importing the wma file that results, but the same thing, black with sound.

  What am I what am I doing wrong or what do I need get this working... grandmas are starting to nag... lol

  Thanks a lot for any help or advice anyone can offer me, time and review.

  Dagtall

  Once again...

  I use USB 2.0 TV BOX to convert my analog video to digital, it's a software is InterVideo WinDVR, using the automatic setting 'Best' for "Record quality", which says that the files are converted to...

  Cut paste &:

  Format: MPEG-2
   
  Audio:
  Format: MPEG-1 Layer II
  Sampling frequency: 44.1 kHz 16-bit stereo
  Bitrate: 224 Kbps
   
  Video:
  Size: 720 x 480
  Frame rate: 29.97 FPS
  Bit rate: 7200 Kbps
   
  Total:
  Bitrate: 7715 Kbps
  File split size: 4063 MB.
  Total record time: 2257 minutes

  I am runing Windows XP Home Edition version 2002 service pack 3, with a Pentium 4 CPU 3.20 GHz, 2 GB Ram. My video card is an e-GeForce 9600 GT superclocked edition DX10 ready 512DDR3 PCI-E.

  ====================================
  You have file compatibility issues.

  Try to use the following free software to convert files
  for the .wmv format and then import into Movie Maker.

  Format Factory
  http://www.pcfreetime.com/

  John Inzer - MS - MVP - digital media experience

• Compilations no longer appear in Albums or playlists

  I think it might be the same issue that is discussed in iTunes not to display all the photos in the grid view (but it's iTunes for Mac - I replied by mistake I use Windows 10).

  Question: Is there a way to make material Compilation to appear in the Album view (s), the way that he used to work before the 12.4.0.119 version?

  After the upgrade to iTunes for Windows to 12.4.0.119, I no longer see compilations (or songs) in various points of view. For example: I imported a box as a compilation. The set consists of several different albums, and I would add the songs as such to a playlist (i.e., a value of an album material at a time). This material is displayed under library-> Albums, but it is no longer made.  (I know that I can click on the button 'Edit' next to 'Library' and add 'Compilations' - it's not what I'm talking about.) "I want to see Albums as I have before).

  I also some songs compilation added to a playlist - they are in fact always there, but they are not displayed when you view as albums.  If I change the display of the playlist to display as a playlist, not only I see the songs on the compilation, but the size increases (rightly) in GB. I prefer the view of the Album and do not look forward to change the view to see what I had in my playlist.  (I don't like albums compilations seem to when I listen to on my iPhone, but it is a different matter.)

  I tried to delete the songs from compilation of the playlist and then adding them again, but that did not help.

  I don't seem to be able to reproduce this problem. Maybe a screenshot to illustrate what you see?

  TT2

• Compilation warning

  SQL > ALTER SESSION SET plsql_warnings * ' enable: serious ', ' enable: performance ', ' ERROR: 05003. "

  What is the implication of the above command?

  A. he issues a warning every time that ERROR: 05003 occur during compilation.

  (B) it causes the compilation fails every time that happens the ERROR.05003 warning.

  C. It emits warnings warn whenever that code causes an unexpected action or erroneous results performance issues.

  D. it causes the compilation fails whenever the code gives wrong results or contains instructions that are never executed.

  No, this is not correct.

  It will become WARNING 5003 a MISTAKE, causing compliation fail instead of succeed. And he has absolutely nothing to do with the performance.

• Triggers do not compile (of APEX Advanced Tutorials.pdf)

  The following trigger not compile. It is the exact copy of the APEX Advanced Tutorials.pdf. It is based on page 249 of the document. Another package is the compilation (ht_check_overdue_issues). Link is provided
  http://download.Oracle.com/docs/CD/E10513_01/doc/AppDev.310/e10497.PDF
  
  Please let me know what mistake I make. It is for the automation of email in APEX
  
  
  IF (INSERTION AND)
  (: new.assigned_to IS NOT NULL)
  OR
  (UPDATE AND)
  
  (: old.assigned_to IS NULL or)
  : new.assigned_to! =: old.assigned_to) AND
  (: new.assigned_to IS NOT NULL)
  THEN
  THE C1
  (SELECT person_name, person_email
  OF ht_people
  WHERE person_id =: new.assigned_to)
  LOOP
  IF c1.person_email IS NOT NULL
  THEN
  FOR c2 IN
  (SELECT project name
  OF ht_projects
  WHERE project =: new.related_project)
  LOOP
  -APEX_MAIL. SEND)
  -p_to = > c1.person_email,
  -p_from = > c1.person_email,
  -p_body = >
  -' You have been assigned a new number.
  "The details are below. ' || Chr (10) |
  -Chr (10) |
  -' Project: ' | C2. PROJECT_NAME | Chr (10) |
  -Summary: ' |: new.issue_summary | " Chr (10) |
  -' State: ' |: new.status | Chr (10) |
  -"Priority: ' |" NVL(:New.Priority,'-'),
  (- p_subj = > 'New Assignment question');
  END LOOP;
  END IF;
  END LOOP;
  END IF;

  Hello

  I guess that your error is here:

  LOOP
  -- APEX_MAIL.SEND(
  -- p_to => c1.person_email,
  -- p_from => c1.person_email,
  -- p_body =>
  -- 'You have been assigned a new issue.
  -- 'The details are below. ' ||chr(10)||
  -- chr(10)||
  -- ' Project: '|| c2.project_name ||chr(10)||
  -- ' Summary: '||:new.issue_summary ||chr(10)||
  -- ' Status: '||:new.status ||chr(10)||
  -- 'Priority: '||nvl(:new.priority,'-'),
  -- p_subj => 'New Issue Assignment');
  END LOOP;
  

  There is no statement between the LOOP and END of LOOP (it's all comments). For testing purposes, you can add a NULL value; statement.

  Greetings,
  Roel

  http://roelhartman.blogspot.com/
  http://www.bloggingaboutoracle.org/
  http://www.Logica.com/

• Problem with compiling SQLDeveloper?

  I noticed sometimes when I compile a PL/SQL package in SQLDeveloper (5440 v1.5.1 build) it tells me that the package was compiled successfully, even if there are errors in the package. Disconnect and reconnect seem to allow me to review the errors, but when I click on "compile" it tells me it is successful and shows as valid.
  
  Any ideas why it does this? The problem seemed to go away by himself before, but he doesn't want to go now, I even restarted my computer and it always tells me that everything's fine and dandy...

  I had this same problem awhile back.

  (Still do, but I've found a workaround.)  :))

  Do you get many warnings during compilation, but no error?

  If so, because it shows only the first X problems and if the X first issues are not errors and warnings, it won't show you errors. Apparently, it's a fault of the database.

  I found two workaround solutions.

  1. fix the reasons that cause the warnings is displayed. If you do this, eventually the errors will show.

  Unfortunately for plan #1 above, there is another flaw in the database that returns incorrect alerts. If so, move to the #2 plan.

  2. There is a setting that disables the feature that displays warnings from the compiler. If you do this, you won't see any warnings (even those you should be set!), but at least you will be able to see the mistakes.

  Hope that helps and that you have not found a new default instead!

• Why is the FPGA Compiler server so slow?

  FPGA Cloud compiler is faster because NO servers are performing, right?
  Well, my Windows 7 PC is powerful, but no luck there!

  Total CPU utilization is never more than 25% and the total memory (including other applications) usage is less than 16%.
  Why, the compile Server uses all available resources? has been restricted?
  How can I leverage more power from my PC?

  If servers OR compile faster code, there must be a plausible explanation / reason?
  Please indicate, how to make the compile server running faster in place?

  I don't know what machines compilation cloud service works, but I do not.

  It seems that the compilation is much faster on a Linux machine on a Windows machine (I think I've heard up to 30% faster). The Linux FPGA compile server is available for LV2012. Set up a Linux machine with a clock high enough CPU and RAM speed and you will get on the fastest possible compilation with current tools.

• LabVIEW 2011 compiled the application crash

  I'm writing an application DAQ simple enough to use in a freshman Engineering Lab is written to the USB-6211. Since it will be used at more than one campus, I try to make a compiled application. Demand, such as built in LabVIEW 2011, works very well. The problem is that the compiled executable hangs in the same places without fail. I've included the source VI unmodified and a version with the acquisition of data code disabled and some dialogue inserted to track the progress of the request. Executables for both are also included.

  I use a architecture of producer/consumer-events to manage the three tasks of data acquisition. Consumers loop will fail after one of the three DAQ events are executed. Consumers loop works very well for the exit event. I also returned to LabVIEW 2010 and recompiled, the same failures.

  Any help is greatly appreciated!

  Stuart

  I think that if you close the front panel to start the VI, it will leave the built application.

  Replace the properies "FP.open" with "FP." State"and toggle between 'Hidden' and 'Normal'. That seems to work in my limited testing.

• If click the white arrow to run vi, is compiled beforehand vi?

  I have this vague idea that compile LabVIEW means something like the compilation in c; compilation only occurs when you want to build the exe.

  And when you click on the white arrow run button in a Labview vi. The vi will be sorta like VB in interpreted mode.

  But however DRESSED review model, I saw this question on Labview know the data type of the strict definition of type at compile time. This seems to suggest that whenever you run the vi, Labview compiles the first vi. Compilation happens only when you want to compile the exe vi.

  While it is true?

  A normal compiler performs different steps during compilation. Pre-treatment, check the syntax, compilation and the actual link is more or less done only once after tell you him to do.

  LabVIEW split this. Syntax checking is a continuous process while you change influence LabVIEW vis. anything not valid causes errors like broken right during the time of change. Once you press the button run LabVIEW can simply take the diagram and compile into machine code, which is normally so fast that you don't even notice it. When you save a disk LabVIEW VI takes the compiled machine code or creates it if it has not been done so far and he recorded with the VI on the disk. Loading the VI the next time the machine code is already there, at least if you are loading the VI on the same platform and version of LabVIEW.

  If LabVIEW ALWAYS executes the compiled code, regardless of whether you run the VI in the development environment or in an executable file.

  Strengthening enforcement is really mostly just take all the parts already compiled and put them in one place, stripping anything useless such as diagrams and also signs of façade that is never visible. This is of course a simplification very strong, but for the purpose of
  This valuable discussion.

• Choose the worker of compilation

  I installed a worker to compile on a linux PC remotely as described here.

  Worker compiling on the remote PC can connect to the compile on PC (widows running) local development server.

  Now, when I make a compilation of the local compilation worker is selected by default.

  How can I select the one remote?

  My setup is as follows

  Development PC: Windows 7, LabVIEW 2010, Xilinx 11.3

  Remote PC: Linux (Ubuntu10.10, I know it is not supported by OR), 2012 LabVIEW compiles worker, Xilinx 13.4

  Is there a compatibility issue between LabVIEW 2010 and 2012 of LabVIEW? Or between the Xilinx software?

  Thank you

  LabVIEW 2010 provides only compile for use with Xilinx 10 and 11 toolchains. Therefore, when you make a compilation, the compile server will search for these tools. Since you have only the xilinx tools installed 13.4 remotely, LabVIEW 2010 will not choose this ability to perform compilations.

  You must update your LabVIEW 2012 host PC to take advantage of its remote workers compiles with the features of LabVIEW 2012.