Mixed architecture with 5508

Similar Questions

• Limitations of architecture with replication of VM with physical RDM Mode

  What are the Limitations of Architecture with replication of VM connected with physical RDM Mode in vsphere replication. Why VMware does not support this?

  I will add some colors to the response of GS. A particular interest with regard to the physical path RDM (pRDM) works, summarize these two chips of the article:

  • Physical mode specifies minimal virtualization SCSI of the mapped device, allowing greater flexibility for SAN management software.
  • VMkernel passes all SCSI commands to the device, with one exception - the REPORT LUNS command is virtualized, so that the VMkernel can isolate the LUN to the virtual machine owner. Otherwise, all the physical characteristics of the underlying hardware are exposed.

  There is an integrated in vSphere vSphere (RV) replication agent that has several functions. In particular, she keeps track of the Scriptures to the virtual machine. When a replication cycle occurs, the changed data is replicated to the target location. The VR agent should be able to 'see' These Scriptures to follow. Given that the physical mode all SCSI commands directly to the device, the VR agent is unable to follow these changes for replication.

• Question/design architecture with best practices?

  Question/design architecture with best practices?
  
  Should I have separate Web server, weblogic application and IAM?
  If yes that how this time will communicate, for example can I webgate on the server that will communicate to each other?
  Any reference to decide how to design and if I have weblogic separate one for enforcement and one for IAM that how session management will take place etc.
  
  How is general design happens IAM project?
  
  Help appreciated.

  I have a business web application deployed on weblogic1 and OHS1

  deploy webtier on this OHS1 to protect the resources on OHS1. webtier will be recorded at OAM (where will be able to communicate with OAM)

  I also IAM deployed on weblogic2 & OHS2

  IAM components have weblogic. then ok. But you don't need to ohs2 here, unless your application itself requires OHS for hosting. But here, you mention that it is fair to IAM - so no need to OSH here. IAM installing requires weblogic.

  wanted to know where should I create provider (weblogic1 or weblogic2), and install webgate (OHS1 or OHS2 or both)?

  I hope it is clear now. If this isn't the case, query post for what is not clear.

• Architecture with two versions of vCOPs management Suite

  Hello

  I appreciate any help on this issue. I have a client who wants vSphere Enterprise to Enterprise vSOM (with vCenter Operations Manager Standard... by default).  This customer has some virtual machines that need monitoring of application., and as you know, it's possible witht vFabric Hyperic available later in the Operations Manager vCenter Enterprise. If the customer is going to buy this two products:

  -vSOM Enterprise: vSphere Enterprise + vCenter Standard Operations Management Suite (licensed per processor)... for the upgrade.   And

  -Operations Management Suite Enterprise (package of 25 OS Instance) vCenter... for VMS that need monitoring.

  In architecture, the question is whether they can 'mix' present two types of license in the same hosts, or if they put those VMs who need follow-up to separate host applications?

  Thanks for your help!

  It is possible to have two different instances of vC registered to a unique vCenter Ops.  My recommendation would be to manage these two versions at the cluster level (Group A would vSOM, Cluster B would be vC OPS, for example).

• can I use a mixer speedboat with logic?

  I use an interface Apollo Twin Duo, two only puts them don't monitor and output two lines, with Logic Pro X, no problem.

  However, from time to time, I would like to mix on a real mixer, so I can stop watching the screen both for my eyes.

  I'm not interested in a DAW controller, I had one and it comes back.

  I just want to know if he is in any case that I can connect to an office of channel 24 or 32 for my Duo Apollo mix since the projects that I have already recorded in logic?

  I know that PreSonus have published a number of new desks, these would work? or any other recommendation to office?

  Hello

  kerochan wrote:

  I just want to know if he is in any case that I can connect to an office of channel 24 or 32 for my Duo Apollo mix since the projects that I have already recorded in logic?

  To do this, you need an audio interface with more than 2 line & 2 outputs to monitor that has your current interface.

  TDC

• Mixed signals with the buffer graph.

  Hi I'm new to LabView and I have a really basic question.

  Here's what I'm trying to do.

  1. I use chart of the mixed signals to display some acquired DAQmx signals.

  2. I have 3 separate field areas.

  3 X - axes of these areas of land must be completely in Sync.

  that is the main reason why I want to use graph of mixed signals.

  4. I want that signals are displayed as table of waveform,

  It's the waveform data are not deleted during update

  and I can scroll to watch old stuff.

  5. I also want to save the data as numbers of I can also

  do all sorts of calculations with them.

  Now with my vi, the graph gets refreshed and crushed

  each sampling period and only a small fraction of the data I want is

  shown on the screen. (I want to these fractions to get annexed by)

  order of chlonological...)

  I guess that it is a fairly common problem for a beginner.

  I could easily do in C or Java, but rather difficult to do on the GUI.

  Any help will be appreciated

  Thank you!

  If you want to see the temporal evolution of your chart, simply change the x-axis not autoscale under properties of the graph. You can use align your waveform in programming > wave > align times. You can activate the option to scroll by right clicking on the graph > visible elements > graphic palette.

  There are many options for data backup. The quick and dirty is to enable indexing of your time loop and thread to write on the worksheet to the title of programming > e/s file > write in the spreadsheet file. Keep in mind that the file is a txt file.

  Post your code for help.

• Software BlackBerry mix conflict with the USB mouse

  I installed Blend and had no problems.  It does not connect while the USB mouse is connected to the computer.  If I disconnect the mouse, then mix will connect to my passport.  IT remains connected and happy until I have plug in a USB mouse.  At that time it disconnects immediately.

  The computer is a laptop with touchpad.  A mouse shows the same question.

  You have the opportunity to try another USB cable?

  I had a similar experience with my eReader and it turns out my USB cable was the source of the problem.

• Photoshop Mix incompatible with Samsung Galaxy GT - N7100 Android 4.4.2 II Note

  Hello.

  I tried to install Photoshop Mix on my device Samsung Galaxy II with Android OS Note 4.4.2 but Google game store shows that it is incompatible with my camera.

  I connected my phone to my pc via USB, it is recognized correctly, but the installation process ends the previous reason.

  So, what can I do to correctly install the PS Mix?

  Thank you.

  Hi Miguel,.

  Please see help Photoshop | Adobe Photoshop Mix FAQ

  Hope that helps!

  Kind regards

  Sheena

• Question of mixer audio with effects and sends visibility

  I started to add an effect to the dynamics of a totality of the channel inside the mixer Audio Track. There is a bug that appears quite often, and I want to know if everyone is touched by it.

  I'm perfectly up-to-date (first Pro CC 2015.1), but this bug may affect earlier versions of the software, too. I think I remember what happens in the earlier versions of CC, but cannot guarantee.

  I'll be referring to the button small triangle that opens and closes the section effects / sends that runs when you click a "spinner".

  Steps to reproduce:

  • Note: I have the project window and mixing of Audio tracks anchored in the same area.
  • Click on "show/hide effects and sends" rotate open the effects
  • Save your prproj file and close Adobe Premiere Pro
  • Open Adobe Premiere Pro and open the same prproj file
  • The spinner is open as if the effects and departures must be visible, but they are not.

  Now, I have to click twice on the spinner twice to actually see the effects and sends.

  This is a minor bug, but I find it affects me often and it's embarrassing.

  Can anyone else reproduce?

  I'm still on Windows 8.1, and my screen resolution is 3840 x 2160 with scaling (100% SETTING)

  Yes did the same thing with me, my mixer track is in stand-alone mode.

• Satellite A300 - series stereo Mix unavailable with the Conexant audio driver

  Hello...

  I have laptop Toshiba Satellite A300 PSAJ0E...
  I was using Windows XP Professional...

  But I'm not able to use Stereo Mix so special...
  I installed the Driver Conexant HD SmartAudio 221...

  What can I do in this topic...

  I thank right now...

  Best regards...

  Unfortunately, but you can not do much
  The point is that it is a Conexant audio driver problem. This option or parameter is simply not available in the Conexant audio driver and as a result the port of stereo mix is not available and cannot be used.

  I don't think a driver update audio can help so expect an update.

  Cheers mate

• Mixed signals with the same index: p

  Hello

  I try to draw multiple signals with the same index x

  I built it, but he can't shoot

  that part which is not respected this VI

  Best regards

  Magnin

  Hello

  I have no license mathscript, but I think it should work:

  

  Let me know...

  Best regards

• can I place my sliders in a plot of mixed signals with my mouse?

  I can move the cursor in the plot via controls cursor without problem. but it's a very slow and laborious process. I would like to be able to just grab the slider with the mouse and place it where I want.

  I can grasp the cursor with my mouse now, but when I move it, it's as if the cursor is locked at the position on the ground and moves the whole plot, I don't want to do.

  I just want to be able to position the cursor a little faster or faster than with the left/right/up/down buttons that are available now. It would be very happy to be able to click on my mouse at a point in the plot and snap the cursor, or just enter the cursor and put it where I want.

  If anyone has any useful suggestions or advice, I appreciate it.

  I'm under labview 8.6 on vista and xp.

  Thanks for your help,

  chip

  Anna k,

  Thanks for your help to solve this problem. That was the part I did not help text, I realized that hand made the 'capture' somehow.

  Thank you for your patience and understanding, so I want to thank baji and james, who were telling me the same thing, I was just too stupid to understand.

  Thank you all,

  chip

  Kudos to you all, if I could figure out how to do this, but I'll go back and try again.

• Mix records with the same name of the internal and external space (clip +)

  Hello

  I have a question regarding the reading of 'File': if having a folder on the inside and external space microsd, both are named "graphics". Is it possible to shuffel these 2 files with the same name? There are also a few other folders I want to be included, so I just couldn't use the "play all" option. I don't want to use replay by id3tag because mines are always screwed up and would be a lot of work to mark all the appropriate files in the.

  Thanks for help

  m.

  I've not played with playlists much.

  If ID3 tags are all screwed up, I would use the MP3tag utility to change the label of the kind in "Charts" on internal and external memory, then you access the kind-> just Charts and play at all.  It is probably not an option if your labels are blank and you don't want to ruin you, but it's really quick & easy to do with MP3tag.

  I think that even Windows Explorer (XP/Vista) can change the field type in the batch (select all 'charts' music files, click right properties, summary (Advanced) tab change the field of its kind in "Charts", OK).  I keep the ID3tags 'good' on my PC, but edit on my player according to the needs.

  Just another idea which is really easy if you're not afraid of screwing the ID3 tags.

• How to mix text with a brush?

  I have the letter T, and I want to thank the T is a very long line. But I can't understand how it mix well so that it looks like one, not like I tried to combine. Here is a screenshot to make it more clear what I'm trying to do. I use Adobe Photoshop CS4. Any inside would be appreciated!

  .

  Screencast:

  Nancy O.

• Physical architecture with XML type

  Hello
  
  I have the following arquives:
  
  -products.dtd
  -file products.xml
  
  driver jdbc: com.sunopsis.jdbc.driver.xml.SnpsXmlDriver
  driver jdbc url: jdbc:snps:xml?f=C:/XSD_ODI_ATG/produtos.xml & d=C:/XSD_ODI_ATG/produtos.dtd & re = gsa-model & s = ODI
  
  
  content of my product.dtd:
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  <! - generated by product.xml by XMLBuddy - >
  <! Add an ELEMENT element (the property-value +) >
  <! ATTLIST add element
  ID ID #REQUIRED
  point-descriptor (catalog | catalogFolder | category | file | external media: product | sku) #REQUIRED >
  <! GSA-model ELEMENT (import-items) >
  <! Import items (add item +) >
  <! Set-property of the ITEM (#PCDATA) >
  <! ATTLIST NMTOKEN #REQUIRED set property name >
  
  
  
  my product.xml file content:
  
  <? XML version = "1.0" encoding = "UTF-8"? >
  <! DOCTYPE gsa-model SYSTEM "produtos.dtd" >
  < gsa-model >
  < import-objects >
  < add an element id = "m2231" point-descriptor 'product' = >
  < set = "childItems" property name > text < / property set >
  < / add item >
  < / import-objects >
  < / gsa-model >
  
  
  When I try to create the physical architecture to ODI, it returns an error:
  
  java.sql.SQLException: no root not found in the DTD file
  
  WHAT IS THE CORRECT ROOT ELEMENT?
  
  Any help is appreciated
  To infinity and beyond
  
  Daniel
  
  Published by: danielm on January 5, 2012 17:39

  A XML file structure is not linear, and cannot therefore be shaped into 'a' product table.
  The way that reverse ODI is that it creates a table for each element. and that's why you see 4 tables (one per element).

  childItems is the value of the attribute 'name' of the element "set_property".
  So, once you get the data inside the database, you will see this in the NAME column.

  HTH