Mixman DM2 shuts down my computer?

Similar Questions

• When I try to shut down my computer with Firefox running it hangs and stops the shutdown process.

  When I try to shut down my computer with Firefox running, it does not close properly during the closing. Instead, it crashes (as described in this article) and will continue to do so until I have stop the shutdown process and close it manually, where it will still not respond. There is the substantive issue. Here is the list of the relevant data to identify more precisely:

  On the list of programs is still active during the closure, the window of Firefox starts only appearing once as it should be, but a few seconds after starting to hang, it begins to appear a second time on the bottom of the list, with the specific name of the page is a duplicate of whatever it is on the original.

  This problem does not occur in safe mode, but it is not caused by one of my addons either, as I figured out after disabling all my addons with tools > Modules rather than the safe mode and still the problem.

  He is listed as that passes several times a week, but that is simply because that's how many times I forgot to close Firefox before pressing 'closed' and leaves the room without bothering to check it works. It happens whenever I try to turn off the computer with Firefox is running well.

  See this article--> occurs not in Safe Mode

  Check and say whether his work after turning off hardware acceleration.

• After leaving the House, ready to shut down my computer, I suddenly started to get ads full page on screen for everything under the Sun.

  I remove home page ready to shut down the computer. On the screen is an ad full page, always different and unrelated to Web sites I visited. He only started recently.

  Looks like a dose of Malware.

  Install, update and run these programs in this order. They are listed in order of efficiency.
  (Not all programs to detect malware, you may need to run them all to solve your problem.)
  These programs are provided free for personal use, but some have limited functionality in "free" mode - but these are the features that you really need not to find and eliminate the problem you have.
  
  Note: If your malware infection is bad enough and you're poorly led to URLS other than what is displayed, you may need to use another PC to download these programs and use a USB stick for transfer to the afflicted PC.

  Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
  
  SuperAntispyware - http://www.superantispyware.com/
  
  AdAware - http://www.lavasoftusa.com/software/adaware/
  
  Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
  
  Windows Defender: Home Page - http://www.microsoft.com/windows/prod.../default.mspx
  
  In addition, if you have a re-direct search engine problem, see this:
  
  http://deletemalware.blogspot.com/2010/02/remove-Google-redirect-virus.html

  If they can't find it or cannot delete it, post in one of these forums using specialized malware removal:
  
  http://www.spywarewarrior.com/index.php
  
  http://Forum.aumha.org/
  
  http://www.spywareinfoforum.com/
  
  http://bleepingcomputer.com

• I get strange symbols when typing and the only way to get rid of them is to shut down my computer!

  Sometimes while typing, a bar appears above the letter, I type with a large number of strange symbols for this letter. The keyboard stop typing. The only way I found to get out, is to shut down my computer and restart it. My wife has the same problem on his computer. What are the causes and can disable this pen?

  When you press certain keys in the letter, a menu of accented letter versions (used in foreign languages) appears so you can choose a. To remove the menu, all you have to do is to continue typing. Product there not?

• Updates Windows 7 has won 13 59 while finalizing the upgrade to Windows 7 from Vista. I shut down the computer?

  Updates Windows 7 has won 13 59 while finalizing the upgrade to Windows 7 from Vista.  I shut down the computer?

  Yes. Close and restart, the updates will catch up.

• Just installed Windows 7. Windows udate watch 21 important security updates but they will install. I get the error code 80070539. Tried to install the updates but the shut down the computer, but the computer stops until they install.

  Just installed Windows 7. Windows udate watch 21 important security updates but they will install. I get the error code 80070539. Tried to install updates by shutting down the computer, but the computer stops until they install.

  Hello Tallydupp, welcome.

  Do you by chance have Google Desktop? Some users have reported interference problems in Winodws 7 while using an older version of Google Desktop.
  Try to uninstall it if it exists.

  Let us know what happens

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• with MS XP, when I shut down the computer, try to download the same update again and again!

  and I don't know how to find the updated info?  Help!  It takes 5-10 minutes every time I have shut down the computer.  How to cancel this update which blocks my crt?

  Thank you!

  Julie

  Hi jjackbcop,

  Thanks for posting in the Microsoft Community.

  I understand that you are facing the issue with windows updates offer several times over and over again.

  Method 1:

  I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow these steps to configure Windows to use a Normal startup of the link report section to return the computer to a Normal startup mode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2:

  I suggest you send the link and check (this also applies to windows XP).

  Windows Update or Microsoft Update repeatedly offers the same update

  https://support.Microsoft.com/kb/910339

• Computer gives an error on IPCap.exe two or three times and then shuts down my computer

  Original title : ipcap.exe

  I get an error message on IPCap.exe and it will close. He would make 2 or three times and then shut down my computer.

  Any suggestions?

  Hello

  • What is the exact error message that you receive?
  • What were book them before the problem started?

  You can view these methods:

  Method 1:

  I suggest you make a system full scan just to be sure.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 2:
  I also suggest you to verify the issue in the State of clean boot and check.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note:

  How to configure Windows to use a Normal startup state After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  1. Click Start and then click Run.
  2. Type msconfig and click OK.
     The System Configuration Utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all services and device drivers and then click OK.
  4. When you are prompted, click on restart to restart the computer.

• When shutting down my computer, Windows tries to close with force "Mediacontextnotificationwindow"... any idea on what it is and how to solve this problem?

  Original title: closed to stop forced mediacontextnotificationwindow

  I'm having a problem with a 'program'... ? When shutting down my computer, Windows tries to close with force "Mediacontextnotificationwindow"... any idea on what it is and how to solve this problem?

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the exact message?

  Perform the clean boot may help you resolve this problem.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  a. click Startand then click run.
  b. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  d. When you are prompted, click on restart to restart the computer.

• Svchost.exe shut down my computer help please!

  Svchost.exe 0 x 47563634 referenced the memory-to-memory 0 x 0000000 could be written... Click ok to debug or cancel and no matter where I click on it it shuts down my computer after so many seconds... I've done virus scans etc... I tried to understand this point for centuries, how to get rid of him to come... I have a virus on my computer svrcard (think that's the name) and nothing will get rid of it, so I think this might be related... norton recognize but cannot quartine it or delete and I have had for about 2 years... I put the svchost.exe side warning to do something on my computer because if I click on it it will stop me... I tried many things and nothing is working any help would be greatly appreciated thanks

  Disable Norton.
  Download Microsoft Safety Scanner to scan your computer infections by the virus.
  This is a free security tool, you can perform. It works with your existing antivirus.
  http://www.Microsoft.com/security/scanner/en-in/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Once it has run, you have to re - activate Norton. If the Microsoft safety scanner does not remove the virus, I suggest that you contact Norton support because it does not find the virus, he just can not remove it.

  I hope this helps.

• I have windows xp SP3 installed and every time I have shut down the computer and think that his chest away he starts back up?

  I use an ACER Am1201-B1603A 4800 + AMD Anthlon x 2 #gig ddr ram 120 GB windows xp sp3 with all updates...

  Whenever the computer is shutdown with in a few minutes, it restarts.  This is a new installation like 3 days...

  Any help would be appreciated to grealty

  Hello

  Method 1

  Refer to the article below and try the steps mentioned, check if it helps.

  Windows XP restarts when you try to shut down your computer

  http://support.Microsoft.com/kb/311806

  Method 2

  If the previous step fails then I suggest that you check to see if the problem persists in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 3

  If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you configure the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , and then click run.
  2. Type msconfig , and then click OK.
     The System Configuration utility dialog box appears.
  3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
  4. When you are prompted, click restart to restart the computer.

• Whenever I have shut down my computer it detects 2 updates. I checked the updates of Windows and it seems to be the same ones every day.

  Whenever I have shut down my computer it detects 2 updates. I checked the updates of Windows and it seems to be the same ones every day. And they did so why they keep needing to be updated? They are: a security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864) and: Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2539631)

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  UTC/GMT is 16:02 Friday, September 23, 2011

• The 'Search' function on the start menu does not work. It seems to freeze and will not even close until I have shut down the computer. What can I do to correct this situation?

  I tried to use the "Search" function to locate a specific file.  The computer froze... not allow me to cancel when I realized that it wasn't working.  The only way I could get the closing of the window had to shut down the computer.

  Hi DyleAcker,
   
  -Search function work is no problem earlier?
   
  Run the troubleshooter from the link given below and if it helps to fix the problem:
  Fix Windows Search when it crashes or shows no results

• Whenever I have shut down my computer, I am disconnected from Windows Live Messanger and must manually connect at the beginning of my next session.

  Question asked by Neil Clark (me)
   
  I selected the option Connect automatically in Windows Live Messenger when I turn my computer. Whenever I have shut down my computer, I am disconnected from Windows Live Messanger and must manually connect at the beginning of my next session.

   

  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
   
  Sunday, August 22, 2010 01:54

   

  Windows Live K - Ann C response.

   

  Hi Neil,

  This error occurs usually when a record has been changed when an update has been performed on your computer. To resolve this issue, follow these steps:

  
  Important: before you edit the registry, make sure to save, to understand how to restore the registry if a problem occurs.

  Warning: If you use the correct registry editor, you may cause serious problems may require you to reinstall your operating system. Microsoft does not guarantee that you can solve problems that result from the use of the Publisher of the registry incorrectly. Use the registry edit at your own risk.

  
  BACKUP REGISTRY KEYS:

  1. click on Start, click on run

  2. type regedit and click Ok

  3. in the registry editor window, click desktop on the left side to make sure that you backup all the registry keys.

  4. click on file and click on export

  5. save the file on your desktop or in your desired location. It will have the default extension (* .reg) to back up the registry.

  6. If you want to restore a file to the registry, in the Registry Editor window, click file and click Import

  7. navigate to the location and find the name of the file with the .reg extension and click Open.

  Note: you will be prompted that importation has been properly registered in the register.

  
  TROUBLESHOOTING STEPS:

  1. open the registry editor by clicking on Start, then run. Type regedit and then click OK.

  2 open the user Shell Folders folder. To do this, click on the + sign of each of the products listed below.

  a. click on the [] sign + next to HKEY_CURRENT_USER

  b. scroll and click on the [] sign + next to Software

  c. scroll down and click on the [+] sign next to Microsoft

  d. scroll down and click on the [+] sign next to Windows

  e. scroll down and click on the [+] sign next to CurrentVersion

  f. scroll and click on the [] sign + next to the Explorer

  3. click on the User Shell Folders. A list of entries appears on the right side. Double-click AppData.

  4. the value data, type the following entry, and then click OK: %USERPROFILE%\Application Data

  5. close the Windows Registry Editor and restart your computer.

  Thank you

  K Ann C.

   

  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

   
  Thursday, August 26, 2010 09:27

   

  Response from Neil Clark

   

  Hi K - Ann,

  Thank you for the above information.

  I followed you instruction to back up the registry keys, but when I followed step number 7. Navigate to the location and look for the name of the file with the .reg extension and click Open, the message of answers that I received from the registry editor has been as follows: -.

  Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.
  
  So I closed my computer and restarted. I then followed your instructions again (this time save the backup of the registry to a member in the same library, called "Backup260910bkup"

  Yet once, when I followed the number of the step 7. Navigate to the location and look for the name of the file with the .reg extension and click Open, the message of answers that I received from the registry editor has been as follows: -.

  Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910bkup.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.

  Can you tell me what I need to do to work around this problem of backup of the registry?

  I look forward to receiving your response.

  Thank you

  Neil Clark.

   
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Monday, August 30, 2010 22:19

   

  Response of Windows Live Mechell P.

  Posted by Neil Clark

   

  Impossible to import C:\Documents and Settings\Compaq_Owner\My Documents\My Backup\Backup260910bkup.reg of register: not all data was successfully written to the registry.  Some keys are open by the system or my other processes.

  For this error, you must contact the Support Windows via Microsoft answers Forum link below:
  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

  Thank you
  Mechell P.

  Hi NeilRClark,

  When a registry key is blocked from change, the user can also run a. Registry Registry REG entries to merge the registry keys, values or the value in the system registry data, with the following permission denied error message:

  Cannot import RegistrationEntries.reg. Not all data was successfully written to the registry. Some keys are open by the system or other processes.

  To solve this problem, the ownership and grant full control (read and write) permissions and rights on the protected system registry key.

  Check out this link to do the same thing:

  How to capture a file or a folder in Windows XP

  To take ownership of a file or folder

• Error Windows Update problem "don't shut down your computer updates being configured"

  OT: Windows Update problem.

  Why should I continue to get the message ' don't shut down your computer updates being configured "where all the updates seem to have been installed?

  Start here (ignore the title): http://support.microsoft.com/kb/949358