Mixture of blackBerry software does not not after update on the device

Similar Questions

• Mixture of blackBerry software does not

  So far, I have been successfully using mixture. Today, I am unable to use it as the hub shows that there is no message today and it seems as if it s trying to load.

  On further investigation I can go in my e-mail accounts and that they are responsible, but it's SMS you are not. So it's as if she is unable to find text messages and it hld throughout the system upward.

  I tried it on two PCs and is that the same thing then I guess that the problem is with the phone. I can find a way to reinstall the mixture on the phone and am stuck now! Have rebooted several times without success.

  Any ideas?

  If there is no message text in history, you are required to keep your phone would you be ready to clear the history of sms/mms on your phone and try again?

  To do it please perform the following steps on your phone:

  1. open HUB

  2. Select the message text in the filter list

  3. press and hold the current date at the top of the list

  4. Select "Delete prior" in the list that appears on the right

  After the messages have been deleted, please try to reconnect on the mixture.

• OfficeJet Pro X451dw (CN463A): updated the Firmware says X451dw "EC Firmware Updater does not contain updates for your device."

  I'm trying to update the firmware on my HP Officejet Pro X451dw (CN463A), but the firmware update fails with the error "This Firmware Updater does not contain updates for your device." More precisely:

  1. With the help of EWS, I confirmed that my current firmware is very old (it lists the firmware version of BWP1CN1315FR, which means 1315FR, right?, dating almost the time I bought the printer about 3 years ago).
  2. I downloaded the firmware ("OJP_X451dw_R1640A_updated.dmg") was last updated, copied 'HP Firmware Updater' in /Applications and then he ran.
  3. It shows my printer in the Device Discovery list. I selected and clicked on continue.
  4. He thinks for a while, displaying "recovery information...". »
  5. After a wait of 30 seconds (approx.), it displays "EC Firmware Updater does not contain updates for your device."

  Any suggestions?

  You're welcome @justkwin.

  Here is the utility of a Mac computer:

  FTP://g4u0180.Houston.HP.com/FTP4/pub/softlib/software13/printers/pentane/OJP_X451dw_R1548A.dmg

  Kind regards

  Shlomi

• Editor BEEP works does not after having changed the OBIEE OBIEE 11.1.1.6.0 integration

  SSO has been implemented with SSO - Ondaaah using Kerberos authentication.
  
  Note then is "OBIEE 11 g: configuration of authentication and SSO with Active Directory and Native of Windows authentication" [Doc ID 1274953.1]
  
  But SSO not working for BI Publisher. When contacted Oracle they suggested me to follow the bug below.
  
  Bug 14066028 -BI PUBLISHER does NOT CREATE SESSION SAW the HELP of MSAD AUTHENTICATOR PERSONALIZED
  
  When OBIEE use SSO with MS Active Directory, BEEP should be used instead of analyltics Analytics-ws endpoint. But currently, BIP uses analyitcs as endpoint.
  
  Solution
  1. replace integration endpoint OBIEE Analytics Analytics-ws in the interface user Admin of BEEP (integration - Oracle BI Presentation Services).
  2 test cycle.
  
  
  --------------------------------------------------------------------------------
  
  Now I can't access BEEP or OBIEE or xmlpserver.
  
  When you try to access BI Publisher by http://servername.domian.com:9704 / xmlpserver
  
  Error 500 - Internal server error
  RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
  10.5.1 500 internal Server Error
  The server encountered an unexpected condition which prevented him from meeting the demand.
  
  
  When you try to access the Administration > BI Publisher > Manager BI Publisher we get the following error.
  
  Error 404 - not found
  RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
  10.4.5 404 not found
  Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.
  
  If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
  
  -----------------------------------------------------------------------------------
  
  I tried to change the xmlp-server - config.xml in to analytics.ws and bounced the server, but still facing the same issue.
  
  Please help get the BI Publisher.
  
  Any help is very appreciated.
  
  Thanks in advance.

  This problem has been solved once once the config.xml xmpl-server-file has been manually under the leadership and analytical endpoint was changed to analytics.ws. Bipublisher.ear on WLS console application restart.

  Thank you
  SVS-

• Z10 ATT BBZ10 10.3.2.440 blackBerry software does not work well: screen distorted, keyboard. How downgrade?

  ATT sent a software relaease 10.3.2.440 which was downloaded on my BBZ10 and does not work well: screen distorted, difficult of keys and numbers located on the edges of the keyboard, etc, etc. How downgrade to previous realease of software which worked very well? Thaks for specific support on the issue and BBZ10.

  FDR wrote:

  ATT sent a software relaease 10.3.2.440 which was downloaded on my BBZ10 and does not work well: screen distorted, difficult of keys and numbers located on the edges of the keyboard, etc, etc. How downgrade to previous realease of software which worked very well? Thaks for specific support on the issue and BBZ10.

  Switch magnifying glass Mode OFF in settings - accessibility.

• For hp dv7 fingerprint reader works does not after update to 8.1 windows

  Hello

  I upgraded Windows 8.1 Windows 8.  Before updating the finger print reader worked. I used it to connect to websites in any browser Firefox. I also logged into windows with my fingerprint reader and the screen unlocked the same way.

  I have updated all the drivers according to the instructions on updatig before windows 8.1 and after update.  I checked that everything compatible with windows 8.1 again by the instructions before putting up-to-date.

  After that update the drive light will not read the finger scan and the light does not illuminate. I went to the control panel to check the driver and he was later. I ran the windows driver verifier and on the HP site checked for validity sensor driver is up-to-date.  When I open simple passage it says congratulations you can connect in the window by the touch of the finger. When I go on Internet sites I have red cells connected with simle pass, he now seeks to connect with the password "master."

  Any help would be appreciated!

  Thank you

  BattleAngelita,

  Welcome to the HP Forum.

  Does the SimplePass asks your for your master password Windows means that the program has survived the process of upgrading to Windows 8, 1 - somehow.

  You can start with the following:

  • Create a Restore Point > create a restore - Win7 Point ORcreate a restore point Win8 
  • Close all your programs and shut down your computer
    • Unplug everything (little unifying for the keyboard / mouse external can stay)
    • Perform the Hard Reset for your laptop
    • Start the computer and connect
  • Check is SimplePass himself has sorted them.

  ==========================================================================

  You can try to update your SimplePass program to the latest version in the series of version 6.x.

  Before you do this, read and follow the instructions to export your Webcards in your .tsd file.  Regardless of whether the Web site connections are working right now; you need this backup in case you lose your HP SimplePass program (thanks to the complete removal / reinstallation or if corruption).

  Then, consider updating the HP SimplePass program to the latest version 6 series.  If you are already using the latest version, consider other options in the guide, including the "Repair SimplePass" procedure.

  Open the file > click Download > click 'open in Adobe Reader.

  Simple Instructions for upgrade HP SimplePass

  Click on the thumbs-up Bravo !

  It's a nice way of saying 'Thank you' for help.

  While I strive to reflect best practices of HP, I do not work for HP.

• X 51 R2 Ethernet does not not after update to the last W10

  So my Windows 10 upgrade works really well, but after the update (may be a coincidence) the Ethernet port no longer works.

  If I go to Device Manager there is no warning. I did the W10 check for update of the driver but there was nothing.

  I swapped autour cables with my Smart TV and he is always able to access the internet, so it is not the cable or switch.

  I booted up a Live Ubuntu disc and it has been able to access the Internet by Ethernet so I guess this isn't a hardware problem.

  I rolled back to Windows 8.1 and it still does not work, so at this point, I guess the update knocked out using some driver Ethernet the X 51.

  I do not have any third-party antivirus installed, just everything what comes with Windows 8.1/10.

  Anyone else does?

  Well duh. When I got to Windows 8.1 I don't check the Device Manager. Of course after the deactivation and reactivation of the Ethernet card it works.

  So, I guess that if someone finds this - here's how to fix your Ethernet if the W10 update knocked out the last two days.

• Webcam works does not after update

  After a recent update on my Windows 7, no webcams work longer. Locate the can´t system, as are they connected werenâ´t.

  I have can´t reinstall the device drivers, because I have a Microsoft LifeCam VX-500, and its pilots are supposed to be a native component of Windows 7. I also tried with other devices, and none of them does not work either.

  After a recent update on my Windows 7, no webcams work longer. Locate the can´t system, as are they connected werenâ´t.

  I have can´t reinstall the device drivers, because I have a Microsoft LifeCam VX-500, and its pilots are supposed to be a native component of Windows 7. I also tried with other devices, and none of them does not work either.

  You can always reinstall drivers even if they are native in Windows. Go to control panel and open the Device Manager. Look down the list of all references to your webcam (video, microphone, etc.). They may appear with a yellow! mark indicating there is a problem with the driver, or they might not. If none does everyone try to enable 'Show hidden devices' in the view menu. For each entry in webcam that you find, right-click on it, select properties then driver. Click on the button that says "roll back driver". The earlier work driver should then re - install.

  If the Roll Back driver option is disabled which means there is no new driver installed. You can always reinstall the driver however. Right-click on each entry in webcam and select uninstall driver. When it is unplug your webcam. Reset is optional, if not plug your webcam into even once (in a port on the computer NOT to a hub) and Windows should re - detect and install the drivers again.

  In case it was an update of the driver who caused your problem when you rolled back each of the webcam drivers and tested the camera working again, go to Windows Update and look for the updates. The problem with the driver should appear again. From the screen to view updates (the one with the details on upgrades), right-click on the update of the webcam driver and select "hide update". After that it shouldn't bother you again.

• Integrated WLS starts does not after activating all the flags "Debug".

  Hello

  I have JDeveloper 11.1.1.4 with Integrated Weblogic Server. I had activated all "Debug" flags in the WLS and now after the bounce required servers, it does not come to the top. Should I did more than all the "Debug" options, but I am just unable to login to turn it off.

  Is it possible to get around this problem?

  Thank you

  Vikas

  Check also if you could comment on the underside of the elements in the config.xml file and restart the server, if you have not kept the backup copy of the configuration file.

  WebLogic

  true

  If the server still does not start, check the server log, for errors or critical problems and go back with the details or error stack trace to help you.

  Thank you

  Vijaya

• App update work does not after updating IOS 10

  Hi guys,.

  After the update my 6plus iphone to IOS 10 yesterday, I have a problem with the update of the applications on the Itunes store. Updates are not downloaded. IPhones shows it starts the download but nothing happens.

  Tried via 4G and Wifi but no difference.

  Help much appreciated.

  Thank you

  TBirdGarage

  Restart your iPhone, and then try again.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

• Phone no ID number does not after updating ios 10, showing "unknown"

  Hi, I have recently updated to ios 10 on my iPhone 5s, after which my phone in the tab displays "unknown". Also I am not able to change a put my number inside. How to solve the problem? Asked me again activate Facetime and iMessage.

  Hello Milan_Mumbai,

  I think I understand your unknown phone number display in your settings. Also, you are being invited to activate new iMessage and FaceTime. These two issues have started after the update to iOS 10. I know not when it can be on your iPhone is not behave as expected after an update. I'm happy to help you.

  If there is a problem with your phone number in the settings, it could impact the iMessage and activations of FaceTime. First of all, I recommend you restart your iPhone. Restarting may solve many unexpected behaviours. Please use the steps below to restart if necessary.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  If the problem persists, follow the steps below.

  1. Make sure that you are connected to a Wi-Fi network or cellular data. If you use an iPhone, you will need the SMS messaging to activate your phone number with iMessage and FaceTime. Depending on your operator, you might be charged for the SMS.
  2. Go to settings > general > Date & time and make sure you have properly configured your zone.

  If you get an error when you try to activate FaceTime or iMessage

  Have a wonderful day!

• Add-ons - works does not after update

  Since the update to Firefox 42, I had to refresh it and among a long list of other problems my modules do not work. When I click on tools > Modules I get the error message "cannot find server".

  How to solve this?
  Thank you.

  • 1 Download Firefox for all languages and systems v42 {web link}
  • 2 Uninstall Firefox on your computer {web link}
    DO NOT REMOVE your profiles.
  • 3 after that, restart the computer. Then, run the full installer.

• Firefox does not after clicking on the symbol, cannot remove firefox because it tells me that it is still open! Windows 7 64 bit

  Firefox does not at all. Would like to remove it and reinstall, however when trying to uninstall a message pops up that I need to first close firefox! In short: impossible to remove firefox, impossible to reinstall, cannot use it. Operating system Windows 7, 64 bit, Sony laptop computer VAIO PCG 81213 M. Firefox worked just fine before. IE works fine.

  This can help if you have had the same problem as me on the occasions.

  Right-click on an empty area of the taskbar. In the menu that appears, select "start Task Manager". Along the upper part of the "Task manager" window, select the 'process '. You will see a list of running processes. Scroll down the list until you see Firefox. Select it and press the 'end process' at the bottom right. Click 'end process' on the warning popup that appears. Firefox should disappear from the list. Now you should be able to start or to uninstall. If Firefox does not appear in the list at all so this fix is not for you. I hope this helps.
  Lozz

• Pavilion G6 2342dx, Wifi works does not after update driver recommended

  Hello. I have Pavilion G6 2342dx running Windows 8. Yesterday, I used HP support assistant to perform some recommended driver updates. Among the things to day was the device of Qualcomm Atheros Wifi driver and the driver of HP wireless button. Peripheral installed WIFI was 10... 222, 10... 212.

  After the update, my laptop cannot detect any wifi network. This shows simply 'no detected networks.' I also noticed that the light on the button wifi (F12) is always white If yes or no I activate flight mode or not. I get a message on the screen of property on the change in status of airplane mode. However, it doesn't seem to be actually toggle the wifi because of the sidebar, it looks like wifi is on but with the message "no media detected" persistent. In addition, wifi on the status bar icon is grayed out with a red x.

  I tried deactivating and activating the adapter without success. I tried to download and reinstall the driver (10... 212) with no luck. I even tried to disable, uninstall and then reinstall the device in Device Manager. System restore fails whenever I have it try. Interestingly, the last driver on the HP support Web site is the 212, no mention of the 222 pilot.

  Everyone has experienced the same? I would really appreaciate help on what I am completely stuck.

  Hi @futoji,

  Thanks for all the help. I finally resorted when you run the upgrade to Windows 8.1 and that seemed to take care of the problem.

• Fullsceen Slideshow works does not after update (2015.2)

  Hi-

  Since the upgrade to the latest version, I note that the slideshow widget full screen does not work. He works within the Muse app (although that it crashed Muse sometimes when using), and although it will display with the built-in preview of Muse, as soon as you try to make an overview of the slideshow browser does not at all, it's all white.

  To make sure that it wasn't a problem in conflict elsewhere on my site, I tried to create a new site of the Muse and the only thing that I add to the page is a slideshow full screen and leave all the default settings (photo galleries and everything) and still nothing loads at all except for the next/previous/counter options.

  Hi BLSMagazine,

  As I suggested above, have you tried to view your site on another browser?

  Kind regards

  Ankush