Mobile friendly test fails because the Muse sets phone width in pixels

Similar Questions

• Friendly Mobille test fails because the Muse sets phone width in pixels

  Google recommends setting put phone in width as "width = device-width" rather than in pixels

  Is it possible to do it in Muse or do I need to go into the HTML and change the settings manually

  Not a problem to do this, but a nuisance and the Muse can replace when I update the page for another reason

  Thank you

  Kirby

  Please see the answer here Mobile friendly test fails because the Muse sets the width in pixels phone>.

• I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  I try to connect my apple TV.  I've been up to signature in ITunes but got the message that the connection failed because the network time has not been set.  I don't know what I should do.  Thanks in advance.

  Date and me are dealt with by the network. Try restarting your router/modem...

  Verify that DNS is set to auto

  Make sure port 123 is open on the router (refer to the manual of the router to you)

• Adobe Application Manager corrupt - are trying to install the new copy will fail because the AAM is missing according to dump record installation - how to fix this chicken in the egg problem?

  Adobe Application Manager is corrupt and allows a reinstallation try Fail Adobe Acrobat Pro XI - try to install the new copy of the AAM fails because the AAM is missing according to dump record installation - how to fix this chicken in the egg problem?

  06/04/16 16:23:29:507. [INFO] |  | USS | PIM | PIM |  |  | 6256 | Build Version - 9.0.0.244

  06/04/16 16:23:29:507. [INFO] |  | USS | PIM | PIM |  |  | 6256 | Exploitation forest verbosity level set to 4

  06/04/16 16:23:29:507. [INFO] |  | USS | PIM | PIM |  |  | 6256 | CREATING Instance PIM...

  06/04/16 16:23:29:507. [FATAL] |  | USS | PIM | PIM |  |  | 6256 | Detected db journal file, Adobe Application Manager is in a State damaged to C:\Program Files (x 86) \Common Files\Adobe\OOBE\PDApp

  06/04/16 16:23:29:507. [FATAL] |  | USS | PIM | PIM |  |  | 6256 | Adobe Application Manager is needed to solve this problem. However, it is missing or damaged.

  Download a new copy of Adobe Application Manager of http://www.Adobe.com ,

  or re install this product.

  06/04/16 16:23:29:507. [FATAL] |  | USS | The installation program. The installation program.  |  | 6256 | Cannot create the PIM item

  06/04/16 16:23:29:507. [INFO] |  | USS | The installation program.  |  |  | 6256 | Event generated Guid is: "986b04a2-3099-49fd-9067-df69c36ff2b2."

  06/04/16 16:23:29:507. [INFO] |  | USS | The installation program.  |  |  | 6256 | Event generated Guid is: "e5f02581-649c-49ec-a265-800eeb5ad426."

  Does anyone have an idea what to do? I use Windows 7 as operating system

  Hi Ruedigerd91465945,

  Well try download and install Adobe Application manager from here: Adobe - Adobe Application Manager: For Windows: Adobe Application Manager: thank you

  Before installing kindly, restart the machine and then rename the folder in C:\Program Files (x 86) OOBE \Common Files\Adobe\OOBE\PDApp as OOBE_OLD

  Let us know if that helps.

• I want to display the number of success / testing failed in the Testtand of xml report, please help me

  Hi, I want to display the number of success / testing failed in the Testtand of xml report, please help me.

  Later, my requirement is that I should be able to view the number of test / has not passed in the header of the report too.

  I have attached a sequence to give you an idea of how to get the number of results (I don't check it works ), I used 'SequenceFilePostResultListEntry' callback to calculate the number of results.

  and the number of results is passed to the 'ModifyReportHeader' through Globals files, where you can edit the XML file to display in the Repot (follow the link in my previous post).

  Hope this helps

  AshwiN,

• Messenger for Mac connection failed because the service is not responding

  After downloading the Messenger for Mac.8.1 I tried to connect but got the message "connection to Microsoft Messenger failed because the service is not available or you may not be connected to the internet." I am connected to the internet and disconnected from Windows Live messenger. I tried to change my account. I have an OSX6.8 Mac Snow leopard. Nothing works, please help.
  Thank you

  Hello

  Since you are facing this problem only with MSN messenger, I suggest you to contact MSN messenger support group or posting in the support for assistance on the same forums.

  Here is the link: http://windowslivehelp.com/product.aspx?productid=2

  It will be useful.

• Cannot sign it says: "signing in to Windows Live messenger failed because the server is temporarily unavailable. "Please try again later ' Error Code: 8e5e02011

  When I tried to log in it freezes for a while, then he said "signing into Windows Live messenger failed because the server is temporarily unavailable. "Please try again later".
  Error code: 8e5e0211

  Hi Cera,

  In dealing with the problem with Windows Live Messenger, I recommend you post your question in Windows Live Solution Center for assistance.

  Portal Messenger

  Hope the helps of information.

• BioHD-8 error code a smart test failed on the drive

  I am running vista Home premium that came pre-installed (so I don't have a disc) on a hp pavilion slimline S3500f

  I had a problem when windows wouldn't load, just kept freezing and restarting a couple of times before it load.

  I was recommended to change my graphics card, which I did and windows starts to load and then arrested again.

  Then I got a blue screen Uni, when I ran a diagnostic test, I got an error code BioHD-8 a smart test failed on the drive

  I have Norton anti-virus installed on the pc

  I would really appreciate your help on this, thanks in advance

  Hello
  I would suggest to run Startup Repair and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Otherwise, I suggest you post the question in the hp forum and check if that helps:
  http://h30434.www3.HP.com/T5/desktop-hardware/BD-p/HardwareDPC

  It will be useful.

• The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

  I've always used my blackberry to tether my phone but I get the following error message and I can't solve this problem, any help would be appreciated, thanks!

  The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

  Hello

  It seems that the blackberry is not more.

  Pass the installation attaches on the blackberry and make sure that it is configured properly and work.

• Code signing request has failed because the service is temporarily unavailable

  cannot create debug token today. still not to print the message: Code signing request has failed because the service is temporarily unavailable. What is happen?

  Service has been done.
  http://supportforums.BlackBerry.com/T5/BlackBerry-world-development/app-signing-server-down/m-p/2669...
  Try again.

• Authentication failed because the third remote has closed the transport stream

  I am trying to download a zip since an external public server example: https://xyz.com/abc.zip using the webclient.downloadfile () method in an application console, but I end up getting the error below

  "The underlying connection was closed: an unexpected error occurred on a send" and

  "Authentication failed because the third remote has closed the transport stream.

  I tried several solution, but nothing helped. I have no control over the external server. When I manually navigate the link on my browser, I get that download the file, namely the external server is fine and the problem is downloading from the code.

  I tried to put

  System.Net.ServicePointManager.SecurityProtocol = System.Net.SecurityProtocolType.Tls | System.Net.SecurityProtocolType.Ssl3; but it does not work.

  Please suggest

  Hi Anil,

  Thanks for posting your query in Microsoft Community.

  Your question is beyond the scope of what is generally answered in this forum of consumer and would be better suited for the IT Pro TechNet public.

  Please post your question in the TechNet Forums.

• Lost the ability to create tokens of debugging: error: Code signing request has failed because the value debug token of Type Package is not allowed.

  I have been a token of debugging and apps on my device Z10 hundreds of times from the command line and Momentics but this time I am confused.

  I am trying to create a token of debugging (in command line and Momentics) and deploy it in my Z10 camera, but it does not work.   In both cases, I get the following error.

  "Error: Code signing request has failed because the value debug token of Type Package is not allowed."

  2 things have happened recently that make this potentially different situation.

  a.) now my device is currently running OS 10.2

  (b) there was something new regarding signing apps with your blackberry ID?

  I was a little out of the loop for 1-2 months so please forgive me if this problem is very obvious... I am looking for a clue to what I'm doing wrong.

  This has been fixed on both of your accounts.  It was a problem of account setup.  We're looking at what caused it to prevent it from happening in the future.

• Cisco AnyConnect VPN Client (connection attempt failed because the network or pc problem cisco)

  Hi all

  I am trying to connect to my Cisco AnyConnect VPN Client but everytime I try, I get an error (connection attempt failed because the network or pc problem cisco)

  Can anyone help me please with this.

  Thank you

  Zia

  What is the local firewall on your computer?

• Download the stand-alone host to vCenter License Server failed because the exception: vim.fault.HostConnectFault.

  Location:

  ESXi 5.5 Update 2 stand-alone host with a licnese Essentials

  vCenter Server 5.5 Update 2

  Whenever I'm going to add this host to vCenter he fails with the error: download the file < HOST IP > license to vCenter Server failed because the exception: vim.fault.HostConnectFault.

  I restarted the server vCenter, tried different credentials and looked through all the articles online that I can find online with the same question and nothing none of them suggested has worked so far.

  Thoughts?  Ideas?

  I'll leave this here in the event that it helps someone else.  I was using an administrator account on the stand-alone host in an attempt to add it via vCenter.  Once I started using the Root account on the host, I could add without problems.

• I received a notice that my auto renew failed because the credit card could not be processed.  I've updated the information, now how to make certain that my fee was properly paid?

  I received a notice that my auto renew failed because the credit card could not be processed.  I've updated the information, now how to make certain that my fee was properly paid?

  HI nocaldavid,

  If you're referring to your ExportPDF subscription, I can confirm that it has renewed successfully. The next in your account billing date is November 27, 2015, and the account is active.

  You can find a receipt for your payment by following the instructions in this document: manage your membership and your payment. Creative cloud. Look in the section payment & credit card.

  Best,

  Sara