Mode of calendar MS unknown to me

Similar Questions

• Microsoft Outlook 2016 "could not read the calendar. Unknown error.

  iCloud version 5.1 Windows last 10 develop Outlook 2016 Dell XPS8300

  iCloud moved very well and without error messages. iCloud Contacts and reminders are OK, but when I access iCloud calendar I get this message: "could not read the calendar. Unknown error'

  Three facilities on other similar configuration PCs were flawless with every feature works perfectly.

  Have reinstalled Office 365 and iCloud 5.1 on affected PC several times with the same error when access iCloud calendar.

  Corrections and troubleshooting suggestions are most appreciated.

  Surprisingly, all that was necessary to solve this problem was to select the iCloud in 2016 Outlook tab and press the button refresh!

• Satellite Pro 6100, WXP SP2, once in mode installation ensures the unknown USB

  Hello

  After you install the update in Win XP SP2 on my laptop Toshiba SAT Pro 6100, the following occurs:

  When the laptop wakes from sleep mode, the USB connector is unknown and the communication is lost.

  Who knows the answer to this problem?

  Hello Erjee,
  you just need to install the version of the bios 1.90 or later.

  For other machines with the same problem after installing SP2...
  TE2100 v1.60 or later version
  SATELLITE PRO 6000 v1.60 or later version
  PORTEGE 4000 v2.10 or later version
  TECRA 9000 v1.40 or later version

• Calendar resumes always full screen with black bars at the top and bottom

  Calendar always starts like that. I can reduce and enlarge the window, and the problem disappears when the application is open. But once I leave the app and re - open, I have the black bars and minimize/maximize again to get the calendar view full-screen. Seems to happen on the screen of my Air and when you are connected to an external monitor.

  Thanks in advance

  

  Hello

  I have the same problem.  I had this bug with 10.11.x for awhile and then he suddenly stopped.

  I don't really know how...  Maybe it was a cleaning with Onyx, but I'm not sure.

  Since the upgrade of 10.11.4 today the bug came back.  I ran Onyx on the system without a bit of luck so far.

  @xryancx: do you have that you have installed a beta version of Mac OS X?  It was my case (El Capitan GM) but I did upgrade to the official, as soon has - it is available on the Mac App Store.

  Some people think that I've noticed is that the bug does not affect view DAILY.

  Step to reproduce:

  1. Calendar launch (you'll get the bug full screen)
  2. Exit full screen
  3. Click on daily view
  4. Return to full screen mode
  5. Calendar of quit smoking
  6. Calendar lunch again (there is no bug with day mode)

• Synchronization of calendar with Domino traveler gets alerts but not entries

  I have a very annoying problem - I have configured my pre to sync with Notes via the traveler interface (Exchange).  I get alerts on upcoming events in time and these alerts have all the information, but nothing appears in the calendar itself.  When I reset the phone and re-installation of synchronization, the events show on the calendar for a few moments, then disappear.

  Yes, I chose "All" at the top right (and I've tried to 'Exchange' and back some time switching and yes ' display mode "All calendars" is on this account) and yes I have upgraded to 1.2.1.  Still having the issue.

  Any thoughts on what to try?  Miss me the meetings because of this and I'm pulling my hair out.

  Well, 1.3.1 seems to have solved this problem - I now of the calendar entries.

• Virus blocking firewall/Windows Defender

  Hi, my mom 50 year's stupid had on ebay and clicked on some supposed Government called DCHS, site and she got a virus. She knows almost nothing about computers and initially only affected his user account. Now, he is touching mine!

  What the virus has done:
  1. '-re' head from any website to a site called Newsfudge.com
  2 turned off the Windows Firewall and don't let me start
  3 disabled Windows Defender and doesn't let me start
  4 saved my anti-virus to delete infected files.
  What I tried:
  1 delete the files (did not work)
  2 could not enable the firewall on
  3. made the restoration of the system twice (not in safe mode and said: an unknown error caused it does not work)
  4 tried to delete the files in safe mode
  Should I try to do a restore of the system in Mode safe? Any other ideas?

  Hello

  SR is not a good way to remove any type of program; but you can try it.

  Most of malware wrote in his programming not to allow SR as a way to protect themselves from coming off.

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  ABon the Defender being turned OFF

  You are supposed to have an Antivirus, depend on not only advocate which is an antispyware.

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Module of ASA 5506 Sourcefire stuck in recovery

  I performed these steps:

  1. debugging-start module
  2. SW-module module sfr recover configure image disk0: / file_path
  3. ciscoasa # sw - module module sfr recover boot

  The debug says it's over, but it never had a recovery mode.  Here is the fix:

  ASA - FP # retrieve SFR module sw-module Configuration image disk0:asasfr - 5500 x-boot-$5

  ASA - FP # sw - module module sfr recover boot

  Module sfr is recovered. This could erase all configuration data and all the

  on this device and try to download/install a new image for it. This may take

  several minutes.

  Retrieve module sfr? [confirm]

  Retrieve issued for module sfr.

  ASA - FP # Mod - sfr 0 > *.

  MOD - sfr 1 > * EVENT: creating the disc Image...

  MOD - sfr 2 > * TIME: 13:25:58 EDT October 9, 2015

  MOD - sfr 3 > *.

  MOD - sfr 4 > *.

  MOD - sfr 5 > * EVENT: the module is being recovered.

  MOD - sfr 6 > * TIME: 13:25:58 EDT October 9, 2015

  MOD - sfr 7 > *.

  MOD - sfr 8 > *.

  MOD - sfr 9 > * EVENT: successfully created Disk Image.

  MOD - sfr 10 > * TIME: 13:27:42 EDT October 9, 2015

  MOD - sfr 11 > *.

  MOD - sfr 12 > *.

  MOD - sfr 13 > * EVENT: start settings: Image: mnt/disk0/vm/vm_1.img, ISO:-disk0/mnt/cdrom /.

  MOD - sfr 14 > asasfr-5500 x-boot - 5.4.1 - 211.img, Num processors: 3, RAM: 2292 MB, Mgmt MAC: 80:E0:1 D: 07:00

  MOD - sfr 15 >: BB, CP MAC: 00:00:00:02:00:01, HARD drive:-file player = / dev/sda, cache = none, if = virtio, Dev

  MOD - sfr 16 > *.

  MOD - sfr 17 > * EVENT: start settings suite: RegEx Shared Mem: 0 MB, Cmd Op: r, Shared Mem

  MOD - sfr 18 > key: 8061, Shared Mem size: 16, Journal Pipe: / dev/ttyS0_vm1, sock: / dev/ttyS1_vm1, Me

  MOD - sfr 19 > m-path:-mem-path /hugepages

  MOD - sfr 20 > * TIME: 13:27:43 EDT October 9, 2015

  MOD - sfr 21 > *.

  MOD - sfr 22 > status: mapping host VM 0x2aab3a800000 with size 16777216

  MOD - sfr 23 > WARNING: vlan 0 is not connected to the host's network

  MOD - sfr 24 > ISOLINUX 3.73 on 25-01 - 2009 Copyright (C) 1994-2008 h. Peter Anvin

  MOD - sfr 25 > Cisco SFR-BOOT-IMAGE and CX-BOOT-IMAGE for SFR - 5.4.1

  MOD - sfr 26 > (WARNING: all DATA ON DISK 1 will BE LOST)

  MOD - sfr 27 > load bzImage...

  MOD - sfr 28 > loading initramfs.gz...

  Mod-sfr 29> ...................................................................................

  Mod-sfr 30> ...................................................................................

  Mod-sfr 31> ...................................................................................

  Mod-sfr 32> ...................................................................................

  Mod-sfr 33> ...................................................................................

  Mod-sfr 34> ...................................................................................

  MOD - sfr 35 >... ready.

  MOD - sfr 36 > [0.000000] BIOS EBDA/lowmem to: 0009 fc 00/0009 fc 00

  MOD - sfr 37 > [0.000000] initializing cgroup subsys cpuset

  MOD - sfr 38 > [0.000000] initializing cgroup subsys cpu

  MOD - sfr 39 > [0.000000] Linux version 2.6.28.10.x 86-target-64 ([email protected] / * / )

  40 mod - SFR > re.com) (gcc version 4.3.3 (MontaVista Linux Sourcery g ++ 4.3 - 292)) #1 SMP PREEMPT

  MOD - sfr 41 > Mon Feb 2 00:15:14 EST 2015

  MOD - sfr 42 > [0.000000] command line: initrd = initramfs.gz console = ttyS0, 9600 BOOT_IMAGE = bzIm

  MOD - sfr 43 > age

  MOD - sfr 44 > [0.000000] KERNEL supported CPUs:

  MOD - sfr 45 > [0.000000] Intel GenuineIntel

  MOD - sfr 46 > [0.000000] AMD AuthenticAMD

  MOD - sfr 47 > [0.000000] Centaur CentaurHauls

  MOD - sfr 48 > [0.000000] PAT WC disabled due to the known CPU errata.

  MOD - sfr 49 > physical RAM [0.000000] provided BIOS card:

  MOD - sfr 50 > [0.000000] BIOS-e820: 0000000000000000 - 000000000009fc 00 (usable)

  MOD - sfr 51 > [0.000000] BIOS-e820: 000000000009fc 00 - 00000000000a 0000 (reserved)

  MOD - sfr 52 > [0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)

  MOD - sfr 53 > [0.000000] BIOS-e820: 0000000000100000 - 000000008f3fe000 (usable)

  MOD - sfr 54 > [0.000000] BIOS-e820: 000000008f3fe000 - 000000008f400000 (reserved)

  MOD - sfr 55 > [0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)

  MOD - sfr 56 > [0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)

  MOD - sfr 57 > DMI [0.000000] 2.4 present.

  MOD - sfr 58 > [0.000000] last_pfn = 0x8f3fe max_arch_pfn = 0x3ffffffff

  MOD - sfr 59 > init_memory_mapping [0.000000]: 0000000000000000 000000008f3fe000

  MOD - sfr 60 > last_map_addr [0.000000]: end of the 8f3fe000: 8f3fe000

  MOD - sfr 61 > RAMDISK [0.000000]: 7dbe4000 - 7ffff3a6

  MOD - sfr 62 > [0.000000] ACPI: USE 000FD900, 0014 (r0 BOCHS)

  MOD - sfr 63 > [0.000000] ACPI: RSDT 8F3FE3E0, 0034 (r1 BOCHS BXPCRSDT 1 BXPC 1

  MOD - sfr 64 > [0.000000] ACPI: FACP 8F3FFF80, 0074 (r1 BOCHS BXPCFACP 1 BXPC 1

  MOD - sfr 65 > [0.000000] ACPI: DSDT 8F3FE420, A 11, 9 (r1 BXPC BXDSDT 1 INTL 20100528

  MOD - sfr 66 > [0.000000] ACPI: FACS 8F3FFF40, 0040

  MOD - sfr 67 > [0.000000] ACPI: SSDT 8F3FF740, 07F7 (r1 BOCHS BXPCSSDT 1 BXPC 1

  MOD - sfr 68 > [0.000000] ACPI: APIC 8F3FF610, 0088 (r1 BOCHS BXPCAPIC 1 BXPC 1

  MOD - sfr 69 > [0.000000] ACPI: HPET 8F3FF5D0, 0038 (r1 BOCHS BXPCHPET 1 BXPC 1

  MOD - sfr 70 > [0.000000] No. found NUMA configuration

  MOD - sfr 71 > [0.000000] pretend a node to 0000000000000000-000000008f3fe000

  MOD - sfr 72 > [0.000000] Bootmem configuration node 0000000000000000 0-000000008f3fe000

  MOD - sfr 73 > [0.000000] NODE_DATA [0000000000001000 - 0000000000005fff]

  MOD - sfr 74 > [0.000000] bootmap [000000000000b 000 - 000000000001ce7f] pages 12

  MOD - sfr 75 > [0.000000] (6 reservations early) ==> bootmem [0000000000 - 008f3fe000]

  MOD - sfr 76 > [0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 00]

  [Mod - sfr 77 > 00001000]

  MOD - sfr 78 > [0.000000] TRAMPOLINE [0000006000-0000008000] #1 ==> [0000006000 - 00]

  [Mod - sfr 79 > 00008000]

  MOD - sfr 80 > [0.000000] #2 [0000200000 - 0000ae86dc] ==> TEXT DATA BSS [0000200000 - 00]

  [Mod - sfr 81 > 00ae86dc]

  MOD - sfr 82 > [0.000000] #3 [007dbe4000 - 007ffff3a6] RAMDISK ==> [007dbe4000 - 00]

  [Mod - sfr 83 > 7ffff3a6]

  MOD - sfr 84 > [0.000000] #4 [000009fc 00 - 0000100000] BIOS reserved ==> [000009fc 00-00

  [Mod - sfr 85 > 00100000]

  MOD - sfr 86 > [0.000000] #5 [0000008000 - 000000 b 000] PGTABLE ==> [0000008000 - 00]

  [Mod - sfr 87 > 0000b 000]

  MOD - sfr 88 > [0.000000] found SMP MP-table to 000fdac0 [ffff8800000fdac0]

  MOD - sfr 89 > [0.000000] area NFP ranges:

  MOD - sfr 90 > [0.000000] DMA 0 x 00000000-> 00001000 0 x

  MOD - sfr 91 > DMA32 [0.000000] 0 x 00001000-> 0x00100000

  MOD - sfr 92 > Normal [0.000000] 0x00100000-> 0x00100000

  MOD - sfr 93 > [0.000000] area mobile start NFP for each node

  MOD - sfr 94 > early_node_map [2] [0.000000] active varies NFP

  MOD - sfr 95 > [0.000000] 0: 0x00000000-> 0x0000009f

  MOD - sfr 96 > [0.000000] 0: 0x00000100-> 0x0008f3fe

  MOD - sfr 97 > [0.000000] ACPI: PM-timer IO Port: 0xb008

  MOD - sfr 98 > [0.000000] ACPI: LAPIC (acpi_id [0x00] lapic_id [0x00] activated)

  MOD - sfr 99 > [0.000000] ACPI: LAPIC (acpi_id [0 x 01] lapic_id [0x01] activated)

  MOD - sfr 100 > [0.000000] ACPI: LAPIC (acpi_id [0x02] lapic_id [0x02] activated)

  MOD - sfr 101 > [0.000000] ACPI: LAPIC_NMI (acpi_id [0xff] dfl dfl lint [0x1])

  MOD - sfr 102 > [0.000000] ACPI: IOAPIC (id [0x00] address [0xfec00000] gsi_base [0])

  MOD - sfr 103 > IOAPIC [0.000000] [0]: apic_id 0, 0, 0xfec00000, 0-23 GSI address version

  MOD - sfr 104 > [0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

  MOD - sfr 105 > [0.000000] ACPI: INT_SRC_OVR (high level bus 0 bus_irq 5 global_irq 5)

  MOD - sfr 106 > [0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high)

  MOD - sfr 107 > [0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 level)

  MOD - sfr 108 > [0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 level)

  MOD - sfr 109 > [0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000

  MOD - sfr 110 > [0.000000] Using ACPI (EMAC) for SMP configuration information

  MOD - sfr 111 > [0.000000] SMP: allowing 3 CPUs, 0 hotplug CPUs

  MOD - sfr 112 > [0.000000] PCI resources allocating from 90000000 (gap: 8f400000:6fbfc0)

  113 mod - > 00 SFR)

  MOD - sfr 114 > [0.000000] PERCPU: 53248 bytes of data from the cpu allocation by

  MOD - sfr 115 > [0.000000] zonelists 1 built in node ordering, grouping on mobility.  Total number of pages

  MOD - sfr 116 >: 576247

  MOD - sfr 117 > [0.000000] area of policy: DMA32

  MOD - sfr 118 > [0.000000] kernel command line: initrd = initramfs.gz console = ttyS0, 9600 BOOT_IM

  MOD - sfr 119 > AGE = bzImage

  MOD - sfr 120 > [0.000000] initializing CPU #0

  MOD - sfr 121 > [0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)

  MOD - sfr 122 > [0.000000] TSC: impossible to calibrate against PIT

  MOD - sfr 123 > [0.000000] TSC: HPET/PMTIMER calibration failed.

  MOD - sfr 124 > marking [0.000000] TSC unstable due to could not calculate TSC khz

  MOD - sfr 125 > Console [0.000000]: color VGA + 80 x 25

  MOD - sfr 126 > console [0.000000] [ttyS0] activated

  MOD - sfr 127 > [0.000000] bytes allocated page_cgroup 23592960

  MOD - sfr 128 > [0.000000] Please try cgroup_disable = option of memory if you do not want

  MOD - sfr 129 > [0.000000] opening of audit...

  MOD - sfr 130 > [0.000000] bridge No. found AGP

  MOD - sfr 131 > [0.000000] memory: 2244276 k / 2347000 k available (code kernel 4733 k, absent 388 k)

  132 mod - SFR > 102336 k reserved, 2572 k data, 544 k init)

  MOD - sfr 133 > HPET [0.000000]: 3 timers in 0 total, timers will be used by cpu timer

  MOD - sfr 134 > [0.001999] calibration delay loop... 1056.76 BogoMIPS (lpj = 528384)

  MOD - sfr 135 > [0.028995] security framework initialized

  MOD - sfr 136 > [0,031995] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)

  MOD - sfr 137 > [0,038994] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)

  MOD - sfr 138 > [0,040993] mount-cache hash table entries: 256

  MOD - sfr 139 > [0,042993] initializing cgroup subsys ns

  MOD - sfr 140 > [0.043993] initializing cgroup subsys cpuacct

  MOD - sfr 141 > [0.044993] initializing cgroup subsys memory

  MOD - sfr 142 > [0.045993] CPU: L1 I cache: 32K, cache L1 D: 32K

  MOD - sfr 143 > [0.047992] CPU: L2 cache: 4096K

  MOD - sfr 144 > [0.048992] CPU 0/0 x 0-> node 0

  MOD - sfr 145 > [0.049992] ACPI: Core review 20080926

  MOD - sfr 146 > [0.053991] routing APIC put flat

  MOD - sfr 147 > [0.058991]... TIMER: vector = apic1 0 x 30 = 0 pin 1 = 2 apic2 = - 1 pin 2 =-1

  MOD - sfr 148 > [0.069989] CPU0: Intel CPU of QEMU virtual version 1.5.0 stepping 03

  MOD - sfr 149 > [0.072988] Booting processor APIC 0 1 x 1 ip 0 x 6000

  MOD - sfr 150 > CPU initialization [0.000999] #1

  MOD - sfr 151 > [0.000999] calibration delay loop... 1249.28 BogoMIPS (lpj = 624640)

  MOD - sfr 152 > [0.000999] CPU: L1 I cache: 32K, cache L1 D: 32K

  MOD - sfr 153 > [0.000999] CPU: L2 cache: 4096K

  MOD - sfr 154 > [0.000999] CPU 1/0 x 1-> node 0

  MOD - sfr 155 > [0.106983] CPU1: Intel CPU of QEMU virtual version 1.5.0 stepping 03

  MOD - sfr 156 > [0.110983] Booting processor APIC 0 2 x 2 ip 0 x 6000

  MOD - sfr 157 > [0.000999] init CPU #2

  MOD - sfr 158 > [0.000999] calibration delay loop... 1249.28 BogoMIPS (lpj = 624640)

  MOD - sfr 159 > [0.000999] CPU: L1 I cache: 32K, cache L1 D: 32K

  MOD - sfr 160 > [0.000999] CPU: L2 cache: 4096K

  MOD - sfr 161 > [0.000999] CPU 2/0 x 2-> node 0

  MOD - sfr 162 > [0.145977] CPU2: Intel CPU of QEMU virtual version 1.5.0 stepping 03

  MOD - sfr 163 > [0.150977] Brought up 3 processors

  MOD - sfr 164 > [0.151976] in Total, 3 active processors (3555,32 BogoMIPS).

  MOD - sfr 165 > net_namespace [0.155976]: 1280 bytes

  MOD - sfr 166 > [0.158975] NET: registered protocol family 16

  MOD - sfr 167 > [0.162975] ACPI: bus pci registered type

  MOD - sfr 168 > PCI [0.165974]: thanks to the type 1 for base configuration

  MOD - sfr 169 > [0.208968] ACPI: active interpreter

  MOD - sfr 170 > [0.210967] ACPI: (supports the S0-S5)

  MOD - sfr 171 > [0.212967] ACPI: IOAPIC using for the interrupt routing

  MOD - sfr 172 > ACPI [0.226965]: no dock devices found.

  MOD - sfr 173 > [0.228965] ACPI: PCI [PCI0] root bridge (0000:00)

  MOD - sfr 174 > pci 0000:00:01.3 [0.236963]: oddity: region b000-b03f claimed by PIIX4 ACPI

  MOD - sfr 175 > pci 0000:00:01.3 [0.238963]: oddity: region b100-b10f claimed by PIIX4 SMB

  MOD - sfr 176 > [0.284956] ACPI: PCI Interrupt Link [INKA] (IRQ 5 * 10 11)

  MOD - sfr 177 > [0.287956] ACPI: PCI Interrupt Link [LNKB] (IRQ 5 * 10 11)

  MOD - sfr 178 > [0.291955] ACPI: PCI Interrupt Link [LNKC] (IRQ 10 5 * 11)

  MOD - sfr 179 > [0.294955] ACPI: PCI Interrupt Link [LNKD] (IRQ 10 5 * 11)

  MOD - sfr 180 > [0.297954] ACPI: PCI Interrupt link [LNKS] (IRQ * 9)

  MOD - sfr 181 > [0.303953] SCSI subsystem initialized

  MOD - sfr 182 > [0.306953] usbcore: registered new interface driver usbfs

  MOD - sfr 183 > usbcore [0.308952]: coupling half seat new interface

  MOD - sfr 184 > [0.310952] usbcore: registered new driver usb device

  MOD - sfr 185 > PCI [0.313952]: ACPI using IRQ routing

  MOD - sfr 186 > [0.324000] cfg80211: using information field of static control

  MOD - sfr 187 > [0.326000] cfg80211: regulatory field: U.S.

  MOD - sfr 188 > [0.328000] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

  MOD - sfr 189 > [0.330000] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)

  MOD - sfr 190 > [0.332000] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

  MOD - sfr 191 > [0.334000] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

  MOD - sfr 192 > [0.336000] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

  MOD - sfr 193 > [0.338000] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)

  MOD - sfr 194 > [0.340000] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, MPC 3000)

  MOD - sfr 195 > [0.342000] cfg80211: composing the DREA for country: U.S.

  MOD - sfr 196 > NetLabel [0.344000]: initialization

  MOD - sfr 197 > NetLabel [0.346000]: domain hash size = 128

  MOD - sfr 198 > NetLabel [0.348000]: protocols = without LABEL CIPSOv4

  MOD - sfr 199 > NetLabel [0.350000]: no traffic allowed by default

  MOD - sfr 200 > hpet0 [0.352000]: to MMIO 0xfed00000, IRQ 2, 8, 0

  MOD - sfr 201 > hpet0 [0.355000]: 3 comparators, meter 100.000000 MHz 64-bit

  MOD - sfr 202 > [0.363162] pnp: ACPI PnP init

  MOD - sfr 203 > [0.364902] ACPI: type pnp registered bus

  MOD - sfr 204 > [0.373117] pnp: ACPI PnP: found 9 devices

  MOD - sfr 205 > [0.375853] ACPI: not ACPI pnp bus type

  MOD - sfr 206 > bus [0.390113]: 00 0 io port index: [0 x 00-0xffff]

  MOD - sfr 207 > bus [0.392654]: 00 1 mmio index: [0 x 000000-0xffffffffffffffff]

  MOD - sfr 208 > [0.396124] NET: registered to the family of protocols 2

  MOD - sfr 209 > [0,408163] hash table IP route cache entries: 131072 (order: 8, 1048576 bytes)

  MOD - sfr 210 > [0.418293] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)

  211 mod - SFR > s)

  MOD - sfr 212 > [0,430272] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

  MOD - sfr 213 > [0.434109] TCP: Hash tables configured (established 524288 bind 65536)

  MOD - sfr 214 > [0.438086] TCP reno registered

  MOD - sfr 215 > [0.444206] NET: registered protocol family 1

  MOD - sfr 216 > [0.447125] check if image initramfs... it's

  MOD - sfr 217 > [6.518130] release initrd memory: 36972 released k

  MOD - sfr 218 > [6.569185] of the Microcode Update Driver: v2.00 [email protected] / * />, Peter

  MOD - sfr 219 > Oruba

  MOD - sfr 220 > HugeTLB [6.588064] saved page size of 2 MB, pre-allocated 0 pages

  MOD - sfr 221 > VFS [6,593576]: disk quotas dquot_6.5.1

  MOD - sfr 222 > [6,595689] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

  MOD - sfr 223 > msgmni [6.605316] has been set to 4455

  MOD - sfr 224 > alg [6.612220]: no test for stdrng (krng)

  MOD - sfr 225 > block [6.615153] layer SCSI generic (bsg) version 0.4 (large 252 load driver

  MOD - sfr 226 > [6.618853] io Scheduler noop registered

  MOD - sfr 227 > [6.620963] registered early io Scheduler

  MOD - sfr 228 > registered [6.623461] deadline i/o Scheduler

  MOD - sfr 229 > [6.625704] io Scheduler cfq registered (default)

  MOD - sfr 230 > LTT [6.628422]: ltt-relay init

  MOD - sfr 231 > [6.631109] init ltt-control

  MOD - sfr 232 > LTT [6.662473]: init ltt-kprobes

  MOD - sfr 233 > pci 0000:00:00.0 [6.664400]: limitation of direct transfers of PCI/PCI

  MOD - sfr 234 > [6.667440] pci 0000:00:01.0: PIIX3: allowing Passive release

  MOD - sfr 235 > pci 0000:00:01.0 [6.670447]: workarounds activation ISA DMA hang

  MOD - sfr 236 > pci_hotplug [6.678607]: PCI Hot Plug PCI Core version: 0.5

  MOD - sfr 237 > processor [6.686734] ACPI_CPU:00: registered under cooling_device0

  MOD - sfr 238 > processor [6.690758] ACPI_CPU:01: registered under cooling_device1

  MOD - sfr 239 > processor [6.694508] ACPI_CPU:02: registered under cooling_device2

  MOD - sfr 240 > [6.745499] v1.2 of nonvolatile memory driver

  MOD - sfr 241 > [6.747732] Linux agpgart v0.103 interface

  MOD - sfr 242 > [6.751051] [drm] Initialized drm 1.1.0 20060810

  MOD - sfr 243 > series [6.753517]: 8250/16550 driver4 ports, IRQ sharing enabled

  MOD - sfr 244 > [7.006452] ÿ serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550

  MOD - sfr 245 > serial8250 [7.258458]: ttyS1 to I/O 0x2f8 (irq = 3) is a 16550

  MOD - sfr 246 > [7,266612] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550

  MOD - sfr 247 > [7,271074] 00:07: ttyS1 to I/O 0x2f8 (irq = 3) is a 16550

  MOD - sfr 248 > [7,276159] or floppy drives: fd0 1. 44 m, fd1 is 1.44 M

  MOD - sfr 249 > CDF [7.291444] 0 is a S82078B

  MOD - sfr 250 > brd [7.317314]: loaded module

  MOD - sfr 251 > loop [7.328490]: loaded module

  MOD - sfr 252 > [7.330818] driver Intel® Gigabit Ethernet network version 1.2.45 - k2

  MOD - sfr 253 > [7.334212] Copyright (c) 2008 Intel Corporation.

  MOD - sfr 254 > [7.337304] pcnet32.c:v1.35 21.Apr.2008 [email protected] / * /

  MOD - sfr 255 > [7.340979] e100: Intel® PRO/100 network driver, 3.5.23 - k6-NAPI

  MOD - sfr 256 > [7.344061] e100: Copyright (c) 1999-2006 Intel Corporation

  MOD - sfr 257 > [7.348056] sky2 driver version 1.22

  MOD - sfr 258 > console [7.353036] [netcon0] enabled

  MOD - sfr 259 > netconsole [7.354877]: network registration has started

  MOD - sfr 260 > [7.358495] entry: emulation of mouse button Macintosh as/devices/virtual/input/i

  MOD - sfr 261 > nput0

  MOD - sfr 262 > iSCSI [7.365941] loading transport class v2.0 - 870.

  MOD - sfr 263 > [7.375699] driver "sd" would need to discount - use the type_bus methods

  MOD - sfr 264 > driver [7.379516] "sr" needs updating - please use the type_bus methods

  MOD - sfr 265 > scsi0 [7.387492]: ata_piix

  MOD - sfr 266 > [7.391492] scsi1: ata_piix

  MOD - sfr 267 > [7.394664] ata1: PATA MWDMA2 cmd 0x1f0, 0x3f6 bmdma 0xc0c0 irq 14 ctl max

  MOD - sfr 268 > ata2 [7.398007]: PATA max MWDMA2 cmd 0 x 170 ctl 0 x 376 bmdma 0xc0c8 irq 15

  MOD - sfr 269 > ata1.00 [7.555320]: ATA-7: QEMU HARDDISK, 1.5.0 max UDMA/100

  MOD - sfr 270 > ata1.00 [7.558496]: 6291456 sectors, multi 16: LBA48

  MOD - sfr 271 > ata1.00 [7.562297]: set to MWDMA2

  MOD - sfr 272 > ata2.00 [7.718432]: ATAPI: QEMU DVD-ROM, 1.5.0 max UDMA/100

  MOD - sfr 273 > ata2.00 [7.722448]: set to MWDMA2

  MOD - sfr 274 > [7.726963] isa bounce pool size: 16 pages

  MOD - sfr 275 > [7.728428] 0:0:0:0 scsi: access live ATA QEMU HARD disk 1.5. PQ:

  MOD - sfr 276 > 0 ANSI: 5

  MOD - sfr 277 > sd 0:0:0:0 [7.733798]: [sda] 6291456 sectors of 512 bytes of material: (3.22 GB/3.00

  MOD - SFR 278 > GiB)

  MOD - sfr 279 > sd 0:0:0:0 [7.737586]: [sda] write protect is off

  MOD - sfr 280 > sd 0:0:0:0 [7.741046]: [sda] write cache: enabled, read cache: enabled, doesn'

  MOD - sfr 281 > t support DPO or FUA

  MOD - sfr 282 > sd 0:0:0:0 [7.744505]: [sda] 6291456 sectors of 512 bytes of material: (3.22 GB/3.00

  MOD - SFR 283 > GiB)

  MOD - sfr 284 > sd 0:0:0:0 [7.748396]: [sda] write protect is off

  MOD - sfr 285 > sd 0:0:0:0 [7.750876]: [sda] write cache: enabled, read cache: enabled, doesn'

  MOD - sfr 286 > t support DPO or FUA

  MOD - sfr 287 > [7.755364] sda: unknown partition table

  MOD - sfr 288 > [7.761433] sd 0:0:0:0: disk Attached SCSI [sda]

  MOD - sfr 289 > [7.765315] sd 0:0:0:0: Attached scsi generic sg0 type 0

  MOD - sfr 290 > [7.770345] 1:0:0:0 scsi: CD-ROM DVD-ROM QEMU, 1.5 QEMU. PQ:

  MOD - sfr 291 > 0 ANSI: 5

  MOD - sfr 292 > sr0 [7.777328]: scsi3-mmc drive: 4 x / 4 x cd/rw xa/form2 plateau

  MOD - sfr 293 > [7.780375] uniform CD-ROM review: 3.20

  MOD - sfr 294 > [7.785706] 1:0:0:0 sr: Attached scsi generic sg1 type 5

  MOD - sfr 295 > basic driver Fusion MPT [7.791309] 3.04.07

  MOD - sfr 296 > [7.793519] Copyright (c) 1999-2008 LSI Corporation

  MOD - sfr 297 > [7.795993] SPI Host MPT Fusion driver 3.04.07

  MOD - sfr 298 > Fusion MPT FC host [7.798893] driver 3.04.07

  MOD - sfr 299 > Fusion MPT SAS host [7.801803] driver 3.04.07

  MOD - sfr 300 > ehci_hcd [7.806451]: () 'Improved' USB 2.0 EHCI host controller driver

  MOD - sfr 301 > [7.810308] ohci_hcd: USB 1.1 'open' (OHCI) Host Controller Driver

  MOD - sfr 302 > uhci_hcd [7.814054]: pilot USB Universal Host Controller Interface

  MOD - sfr 303 > [7.818692] usbcore: registered new interface driver usblp

  MOD - sfr 304 > [7.821487] initializing USB Mass Storage driver...

  MOD - sfr 305 > [7.824998] usbcore: registered new driver usb-storage interface

  MOD - sfr 306 > [7.827794] USB Mass Storage support registered.

  MOD - sfr 307 > [7.830759] usbcore: registered new interface driver libusual

  MOD - sfr 308 > PNP [7.834894]: PS/2 controller [PNP0303:KBD, PNP0f13:MOU] 0 x 0, 60 x 64 irq 1.1

  MOD - sfr 309 > serio [7.841445]: 0 x 60 i8042 keyboard port, irq 0 x 64 1

  MOD - sfr 310 > serio [7.844551]: 0 x 60 i8042 port, irq 0 64 12 x

  MOD - sfr 311 > [7,852993] mouse: PS/2 mouse to common mechanism for all mice

  MOD - sfr 312 > [7,861470] 00:01 rtc_cmos: RTC may wake from S4

  MOD - sfr 313 > [7.864335] input: keyboard to translate the value 2 as/devices/platform/i8042/seri

  MOD - sfr 314 > o0/entry/entry 1

  MOD - sfr 315 > [7,865148] 00:01 rtc_cmos: RTC database: registered rtc_cmos as rtc0

  MOD - sfr 316 > rtc0 [7.865148]: alerts until one day, 114 bytes nvram, hpet IRQ

  MOD - sfr 317 > i2c/dev entries driver [7.865929]

  MOD - sfr 318 > md [7.867791]: raid1 personality registered for level 1

  MOD - sfr 319 > device - map [7.880892]: ioctl: 4.14.0 - ioctl (2008-04-23) initialized: dm - dev

  MOD - sfr 320 > [email protected] / * /

  MOD - sfr 321 > [7.885043] cpuidle: using Governor ladder

  MOD - sfr 322 > [7.887189] cpuidle: using the menu of Governor

  MOD - sfr 323 > [7.889424] no iBFT detected.

  MOD - sfr 324 > [7.907995] usbcore: registered new interface driver hiddev

  MOD - sfr 325 > [7.912219] usbcore: registered new interface driver usbhid

  MOD - sfr 326 > usbhid [7.914857]: kernel v2.6 HID Driver

  MOD - sfr 327 > [7.918409] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11

  MOD - sfr 328 > [7.920969] 0000:00:04.0 virtio-pci: PCI INT A-> link [LNKD]-> GSI 11 (level,

  329 mod - SFR > high)-> IRQ 11

  MOD - sfr 330 > [7.927488] ACPI: PCI Interrupt Link [INKA] enabled at IRQ 10

  MOD - sfr 331 > [7.930856] 0000:00:05.0 virtio-pci: PCI INT A-> link [INKA]-> GSI (level 10,

  332 mod - SFR > high)-> IRQ 10

  MOD - sfr 333 > [7.938651] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11

  MOD - sfr 334 > [7.942086] 0000:00:07.0 virtio-pci: PCI INT A-> link [LNKC]-> GSI 11 (level,

  335 mod - SFR > high)-> IRQ 11

  MOD - sfr 336 > vda [7.948686]: vda1 vda2 vda3< vda5="" vda6="" vda7="">

  MOD - sfr 337 > [7.964043] Advanced Linux Sound Architecture Driver Version 1.0.18rc3.

  MOD - sfr 338 > [7.973312] list of devices ALSA:

  MOD - sfr 339 > [7.974949] No soundcards found.

  MOD - sfr 340 > [7,976759] Netfilter messages via NETLINK v0.30.

  MOD - sfr 341 > [7.979604] nf_conntrack version 0.5.0 (16384 buckets, max 65536)

  MOD - sfr 342 > [7.983256] ctnetlink v0.93: registration with nfnetlink.

  MOD - sfr 343 > IPv4 [7.987257] pilot in IPv4 tunneling

  MOD - sfr 344 > ip_tables [7,991258]: (C) 2000-2006 Netfilter Core Team

  MOD - sfr 345 > [7.993887] registered TCP cubic

  MOD - sfr 346 > [7.995714] socket of netlink XFRM initialization

  MOD - sfr 347 > [7.999255] NET: registered to the family of protocols 10

  MOD - sfr 348 > [8.003264] lo: disabled Privacy Extensions

  MOD - sfr 349 > tunl0 [8.007258]: disabled Privacy Extensions

  MOD - sfr 350 > ip6_tables [8,011258]: (C) 2000-2006 Netfilter Core Team

  MOD - sfr 351 > [8.014386] IPv6 over IPv4 tunnel driver

  MOD - sfr 352 > sit0 [8.017431]: disabled Privacy Extensions

  MOD - sfr 353 > [8.021257] NET: registered protocol family 17

  MOD - sfr 354 > CPP [8.025256]: registered udp transport module.

  MOD - sfr 355 > CPP [8.026916]: registered tcp transport module.

  MOD - sfr 356 > taskstats registered [8,031108] version 1

  MOD - sfr 357 > [8.125760] input: ImExPS/2 generic explore Mouse as/devices/platform/i8042/s

  MOD - sfr 358 > erio1/entry/input2

  MOD - sfr 359 > [9,543210] queries send DHCP and RARP, OK

  MOD - sfr 360 > [10.161328] IP-Config: 0.0.0.0 DHCP response, my address is 192.168.10.1

  MOD - sfr 361 > 01

  MOD - sfr 362 > [10.173277] IP-Config: complete:

  MOD - sfr 363 > device [10.175341] = eth1, addr = 192.168.10.101, mask = 255.255.255.0 gw = 192,1

  MOD - sfr 364 > 68.10.2.

  MOD - sfr 365 > host [10.179964] = 192.168.10.101 = domain, nis-domain = (none).

  MOD - sfr 366 > [10.183083] bootserver = 0.0.0.0, rootserver = 0.0.0.0, rootpath =

  MOD - sfr 367 > [10.186725] release of kernel memory used: 544 k released

  MOD - sfr 368 > INIT: initialization version 2.86

  MOD - sfr 369 > [10.446791] version 124 udevd began

  MOD - sfr 370 > please wait: start...

  MOD - sfr 371 > climb: already mounted or busy/sys sysfs

  MOD - sfr 372 > mount: according to mtab, sysfs is already mounted on/sys

  MOD - sfr 373 > starting udev, udev [10.949268]: renamed cplane eth0 network interface

  MOD - sfr 374 > [10.962321] end_request: i/o error, dev fd0, sector 0

  MOD - sfr 375 > udev [10.979259]: renamed eth1 eth0 network interface

  MOD - sfr 376 > [11.535307] end_request: i/o error, dev fd0, sector 0

  MOD - sfr 377 > INIT: enter run level: 5

  MOD - sfr 378 > boot OpenBSD Secure Shell Server: sshd

  MOD - sfr 379 > generating ssh RSA key...

  MOD - sfr 380 > generating ssh DSA key...

  MOD - sfr 381 > fact.

  MOD - 382 LICO > demon from Advanced Configuration and Power Interface: acpid.

  MOD - sfr 383 > acpid: commissioning with proc fs

  MOD - sfr 384 > acpid: opendir(/etc/acpi/events): no such file or directory

  MOD - sfr 385 > starting Busybox inetd: inetd... done.

  MOD - sfr 386 > starting ntpd: fact

  MOD - sfr 387 > starting syslogd/klogd: fact

  MOD - sfr 388 >

  Services Cisco FirePOWER 5.4.1 boot image

  ASA - FP # sh mod sfr

  Model serial number of map mod

  ---- -------------------------------------------- ------------------ -----------

  SFR unknown n/a JAD192502N6

  MAC mod Fw Sw Version Version Version Hw address range

  ---- --------------------------------- ------------ ------------ ---------------

  SFR 80e0.1d7d.53bb to 80e0.1d7d.53bb / o

  The Application name of the SSM status Version of the Application of SSM mod

  ---- ------------------------------ ---------------- --------------------------

  Data on the State of mod aircraft compatibility status

  ---- ------------------ --------------------- -------------

  SFR recover not Applicable

  Which is expected. Then you must:

   session sfr console

  .. .and then login (admin / Admin123).

  You should get a prompt like:

   asasfr-boot>

  Run "setup" but to "bootstrap" basic settings (ip address, host name, etc.) on the partially initialized module.

  Then, install the system software image using the system command:

   asasfr-boot> system install [noconfirm] url

  Include the noconfirm option if you do not respond to the confirmation messages. Use an HTTP, HTTPS or FTP URL; If a user name and password are required, you will be asked for them. the URL must include the package (pkg) with the complete picture of SFR installation package.

  When the installation is complete, the system reboots. Allow or more than 10 minutes for the installation of the application component and fire ASA services start.

  The output of the show module sfr command should also show up to all processes.

• Thunderbird freezes when Windows 10 fate of mode 'sleep'. SOLVED by disabling lightning, provider for Google Calendar and calendar Tweak

  Since the update of Windows 7 Windows 10, Thunderbird has acted erratically. At random times, he keeps checking for new messages. If I then try to manually check for mail, it freezes. He meets some menu commands, but by clicking anywhere in the components (list the mailboxes), the list of messages, etc. does nothing. Sometimes, it opens a white notification window, which I can only get rid of kill it with Task Manager. More often, if I just close Thunderbird and start it again, it starts working normally again... For a period of time. The problem seems to happen most often when I turn Windows off mode 'sleep', but

  I'm currently under Thunderbird 38.2.0.

  I tried to disable some add-ons that I wasn't really using. I'll see if that helps. I saw that he suggested that users with similar problems running Thunderbird with all disabled add-ons, but I also saw that it said that it is really only a temporary fix rather than a real solution and I agree. List of enabled extensions:

  Add-on Compatibility Reporter 1.1.1
  The Update Checker 2.13 module
  Check compatibility 1.3.1
  Compact header 2.1.0
  Mark all as read button 0.7.1
  Reduce to a minimum at Lac revived 1.1.2.1

  Any other suggestions? Anyone else having the same problem? I saw a few others with Windows 10 problems, but nothing quite matched mine.

  Thanks for the help. Until now, deactivation of lightning, provider for Google Calendar and calendar Tweaks seems to have solved the problem. If it begins to freeze again, I'll do Mode without fail a test.

• Can I sync the calendar in offline mode?

  I have setup a personal CalDAV server at home. With Firefox OS (v1.1), I added the external calendar successfully and I can create and edit (does not however remove, but who don't mind) events without problem. Obviously, this works only while I'm connected to my local network. What I want to do is to add events to the calendar in offline mode and when I get, synchronize all these events to caldav calendar. Is there a way to do this?

  Hi lufte.

  This feature is not available in the current version of Firefox OS.

  You can suggest new features and provide feedback to Firefox OS by going to settings > Improve Firefox OS > send feedback from Mozilla. Our defence experts review all comments that will help with new features and map future versions of the device.

  In the meantime, I created a ticket in bugzilla so that our engineers can start to investigate:

  • https://Bugzilla.Mozilla.org/show_bug.cgi?id=1023061

  Please let us know if you have any other questions.

  Thank you

  -Ralph

• I've upgraded to Firefox 12.0. Now, my Gmail calendar does not open in edit mode. I returned to explore, and the calendar opens there. What is the cure?

  I've upgraded to Firefox 12.0. Now, when I try to reach my Gmail Calendar, he only returned in read-only mode. Temporarily, I went to explore. the calendar appears when editing without problem. What should be my next steps to solve this problem?

  Try to clear the cache of the browser and possibly site cookies, in questions to troubleshoot Firefox in Safe Mode test failure

• The mode of saving on a calendar

  Hello-

  Is there a way to set the mode to save energy on a Canon iR - ADV C2220 for turning on and off a calendar? I'm hoping to put it so it is from Monday to Friday from 08:00 to 18:00. Is this possible?

  Hi 4thelol,

  Thanks for posting!

  Canon does not provide direct support for imageRUNNER the serial products, but your dealer will be able to help you! If you do not have a reseller, please call us at 1-800-OK-CANON (1-800-652-2666) and we will be happy to provide you with the names of the dealers in your area!

• Account ghost or unknown shows in safe mode in Windows XP machine.

  Original title: Phantom account.

  Hello everyone, I hope that someone may be able to provide an answer to a problem, that I detected. I have a "ghost" or "ACCOUNT UNKNOWN" account username on my XP Home SP2 that I found when I went into safe mode and checked the properties-> tab security for one of my programs. This seems to be present in most of the software, but not all.

  The unknown user account is S-1-5-32-547 - can anyone tell me what it is or how it got there? Or, is there a need to worry?

  When I actually open via control panel user accounts, it is not listed. Only, I fell on it all by checking the properties on the software in safe mode.

  Thanks for any help on this problem / question.

  Kind regards

  Mr.Roger

  Hi Mr.Roger,

  By default, a built-in Administrator account is created when you install the Windows operating system. This account is only accessible in safe mode and to solve the problems of user account.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer

• mode MSC e250 presents itself as the 2 discs with 0kb and unknown file formats

  I have an e250 v01.00.12A and when I put in MSC mode and connect to my computer, it shows two disks, each completely empty and with a size of 0 and an unknown file system. The system setting menu has NO option to reformat the drive. I'm trying to install Rockbox or even just update the firmware, but I am completely at a loss on how to address the issue. I tried using the Sansa Updater into recovery mode, but nothing has worked. Manual updates don't work because I have no way to get the files on the device in MSC mode.

  Thanks for the help.

  Too bad. I have it. I updated the firmware and formatted (Sansa.fmt) in recovery mode. I had to do it twice, for some reason; the first time he totally ruined the memory and it would not connect in control or PSG in addition to showing as 0 MB in the settings menu. Tried again, and it works fine now. Thanks for the help, c1u31355!

• The VIsta calendar reminder is not pop up after the mode "Eve"

  Hello

  I had put a task reminder in the calendar from Windows Vista program.  But did not recall. I put usually PC mode 'sleep' when finished. So I tested if that did anything. So, I had an appointment for 12:15 and had reminder 5 minutes before.  Put the PC in 'sleep' to 12:00 and he works at 12:20, but the reminder of the calendar has no pop up, even after some time. It arises in place when I open the calendar program.  Even if instead of mode 'sleep', if I shut down the PC and start the reminder immediately opens. If "sleep" mode somehow put reminders in the sleep forever.

  Does anyone have idea about this bug?

  Thank you

  I don't know a solution. It does the same thing for me. I use the Outlook calendar. The Live, or Google Calendar likely would do anything as well.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• (Link in compliance mode) unknown USB device

  Hello, when I start Windows 8 Pro I have error "USB device not recognized" and then when I check the Device Manager it is peripheral USB unknown (link in compliance mode), but I have only the mouse and keyboard connected to usb and they work very well. When I try to update the drivers for this unknown device, I get "the best driver for your device software is already installed. When I run troubleshooting I get "Device unknown USB (link in compliance mode) does not work properly" I know already and its not that useful.

  Thank you.

  Hello

  If I understand the question, you get an error message "USB device" unrecognized during startup. Please let me know if this is not correct.
  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.
  1. What is the number of brand and model of the computer?
  2. What is the number of brands and models of mouse and keyboard?
  Method 1:
  I suggest you try to plug in another mouse and keyboard on this computer and check. This is to check if the problem is with the computer or the keyboard and pouts.
  Method 2:
  You can also download and install the latest drivers for the chipset and USB controllers on the manufacturer's Web site. And check if the problem persists.
  Do get back to us and let us know the State of the question in the case where you need further help or your next post. We, at tender Microsoft to excellence.