Model number of list

Similar Questions

• Compaq Evo D5pM - problems using this model number, never find what he listed...

  Compaq Evo D5pM - (Pent4 - 1.7 GHz) problems using this model looking for parts or information number.  Serial number has not been useful.

  Someone said "aka Compaq D510." Trying to buy memory model (found on the case) my number wasn't so I tried to use D510 (it was listed). Apparently not the same computer / mine use 168 pins sticks and D - 510 came 188 pins. I did my 'upgrade' purchase by check the number of pins and using the already installed type.

  My computer is a vertical minitower - looks like D - 510-, but like I said the components are different.

  I was wondering if anyone knows a model Compaq Evo w / same components (P4 1.7 GHz; 168 pin memory) I could use for research purposes. The smallest horizontal model Evo often uses different (smaller) maps, etc..

  Tried the Ctrl-Alt-S keyboard shortcut to bring up the model number (etc.), but my keyboard shortcuts do not work on this computer. Run a search for edge came up with nothing to tune.

  I tried HP support and drivers.  With the help of several model numbers and found that absolutely nothing for HP Compaq or "Compaq" is in the list.

  It is a great 3rd computer that I've updated w / spare parts, use it remotely, especially for music. Only problem was the dark model number. If anyone has something useful to add would be most appreciated. Thanks in advance...

  PS I'm currently trying to identify MB for what it's worth, but a number of alternative model that works would be great.

  Hello:

  Your model is a d500 CMT HP.

  1 GB 128 x 64-133 MHz PC133, 168P DIMM, 3.3V, sync

  Type of memory: , (non - ECC)
  Maximum memory: 3 GB
  Slots: 3

  This is the page for support and drivers for your PC.

  http://h20566.www2.HP.com/portal/site/hpsc/public/PSI/home/?cc=us & lang = in & sp4ts. OID = 96294 & Task = & AC.admitted = 1389381517647.876444892.199480143

  QuickSpecs:

  http://h18000.www1.HP.com/products/QuickSpecs/productbulletin.html#spectype=North_America & type = HTML & docid = 10946

  Because nobody does more than the memory, it will be hard to find and very expensive.

  You can plan on paying more $ $70 / 1 GB chip if you do not find the specification above used on a place like eBay.

  You can buy a newer, faster CMT from HP on eBay for less than $70 delivered.  Memory is much cheaper to buy as well.

  http://www.eBay.com/ITM/HP-DC7600-Pentium-4-3-0GHz-40Gb-512MB-DVDRW-XPPRO-30-day-warranty-/281231108334?PT=Desktop_PCs & Hash = item417aae28ee

• Satellite Pro M50 - need MODEL number

  Hello world

  I'm new to this bear so please with me. I'm looking to sell my Satellite Pro M50 and need model number to the list correctly.
  Where can I find this number, you can.

  Thanks Keith.

  Hello

  Did you look on the bottom of the unit?
  Please do.

  There should be a label that contains the serial number and model.
  If you need the hardware specifications of notebooks and then use the model number and google for more details
  I sure that you will find at the Toshiba m product page

• Model number confusion: SA30 - 303 is a model A30?

  Hi all, I have a little constructive criticism on the search for files and model numbers etc.

  My question would be is a model A30-SA30 - 303? the reason for the question is highlighted below.

  Ok
  We have the series: Satellite
  We have a model number: PSA30E-00526-EN
  We also have a code: SA30-303
  We have a serial number: 93787194G

  When I go to download its application files:

  Product type: laptop (that of easy)
  Family: Satellite (wow that's really simple and easy to use)
  Series of products: huh! What's that! I look at the options, but I don't see anything that matches or is clear. OK guess let s; now I use the code without name as reference or model number? Well, he asks the model number on the next line, so I'll go with the code.

  Well can't do the "series because it is not listed, it's ok maybe just indicates it is a satellite, so I'll go to the next bit 'A' Yes, maybe it's the series ok I select this one, I think I'm on the right track, it says A30 and I got an A30 is the code without reference." OK I'll stay with this choice.

  The point I am making; and Yes, I know I used sarcasm; but it a message quite well, is, I still don't know for sure if my choice is correct, it's always guesswork, though intelligent guesswork, but guess work nevertheless.

  I find this a lot on Web sites with access to files, design of society etc. model number for their benefit not customers. And they list products differently, using disaggregated model references that are illogical.

  A better way to proceed is to use the serial number of products etc that it would have all the info that model on this already no need for product name, model family, etc! Using the series would be a much more elegant and precise; especially for the less technically minded of us; Personally, I class myself as a user, so if I have my doubts, so must many other users.

  Even if you do not change the system, at least make clearer research example

  Series of products: SA series, SM series not A series

  Or at least have some gif images showing where to look and what for, i.e. to highlight the part of the number you want, I just make an example which can be viewed here: http://i50.photobucket.com/albums/f349/darkan9el/Forum%20Posts/toshiba_label.gif

  Apologizes if I references are bad, but I m just guessing.

  Best regards lee

  Hello

  I put t know what is the problem. The driver download area is very clear to me and to most users. If you have a laptop SA30 303 so I think everything should be clear. Or not?
  S is average for the Satellite. A is the series of products; Model number 30; 303 is a country specification.
  If you want to download the driver, so you have only the SA30 specification.
  Now, all questions should be clear.

• Product Information from Toshiba tool model number is "invalid".

  Just received alert Tempro about upgrading Windows 10 (currently on Windows 7)
  It will list all products which could be upgraded to Windows 10
  It seems to do that no list for my Satellite C855-1J0
  I used the Toshiba product information tool that returns information identical to that on the plate on the base of the machine.
  On which type in the update of Windows 10 box, she's back in is not a valid model number.

  The machine was bought in a shop chain throughout the country, so there is no reason to doubt of authenticity.

  Is the info on the specific plate?
  If so, then why not identified by the compatibility of Windows 10 list?
  Is it right for the upgrade?
  I have already registered on the Microsoft website "get Windows 10'.

  Toshiba take in charge that the nine models of laptops for Windows 10. For them, less than two years older laptops models are 'old' models? They don't even support Windows 8.1 laptop models for Windows 10, not to mention these models like yours with Windows 7 installed.

  Who cares what you said Microsoft, if Toshiba does support your drivers for Windows 10 laptop model because they like to have small extra margin on your model, it is not good to install Windows 10 no mater what Microsoft compatibility app tells you. Next time buy those brands that will support new drivers for laptop, more than three years, not those who, like Toshiba, who support only nine drivers with new laptop models.

• Update the series/model number in the BIOS (ThinkPad 2nd Gen Helix)

  Hello! I have a ThinkPad 2nd Gen Helix (model 20CG000QUS), I replaced the motherboard in (because I'm with a Lenovo authorized service depot), but I'm unable to update the series/model number in the BIOS. I tried the utilties USB and bootable diskette and nor will not work (I can't boot from either one sense). This is despite me turning off the Secure Boot option in the BIOS. When I enter my credentials for the key to maintenance/diskette, I find the download ok in, but on the page for the supported systems for this key maintenance/diskette, the Helix model I have is NOT LISTED. I tried to update using other utilities and I get the words of INVA LID, and I can only replace the "LID". So, basically, I'm stuck.

  Any suggestions? Thanks in advance.

  PM sent

• Pavilion dv6000: model number is Off, how do I find model number

  I want to download a User Guide and search for new drivers for this laptop, but the model number box is dissipated on the bottom. I can see the Service tag, but it doesn't seem to be any way to use it to find my model number.

  Hello

  Shut down the laptop.

  Click next to the ESC key as soon as you start Notepad to open the Start Menu, then choose f10 to open the Bios Menu.

  The first tab should list both Introduction model number product no. break-in - either on the link below.

  http://support.HP.com/us-en/drivers/

  Kind regards

  DP - K

• Is there an API that returns the model number or any other identifier for a module installed, I can use to identify the characteristics of this module?

  For example, I'll call you

  DaqSystem.Local.GetPhysicalChannels (PhysicalChannelTypes.AI, PhysicalChannelAccess.External)

  For a list of connected devices.  The data in the table back looks like this:

  cDAQ1Mod4/ai0 (etc.)

  It tells me that I have a CompactDAQ chassis, which is good, and an analog module in the slot Module4.  What I need to know is not just that there is an analog module in the slot to #4, but also of its ability (voltage, temperature, voltage, etc.) so that I can use the correct DAQmx task for this type of module.  All this has to be discovered during execution.

  Otherwise, I'll have to provide a configuration utility when the user program needs to determine which module is plugged that slot - and will it change by moving it to another location, you must enter these details again.  I want to avoid this by making the material more discoverable as possible.

  I can remember an API - and that is my hope.

  * beep *.

  Hello

  I could understand the syntax for you. It's here.

  Device blah = DaqSystem.Local.LoadDevice ("cDAQ1");
  foreach (String dev in bla. ChassisModuleDeviceNames)
  {
  Label1. Text += "\n" + DaqSystem.Local.LoadDevice (dev). ProductType;
  }

  This displays the model number of all modules of the cDAQ in the chassi. I hope this helps.

  Kind regards

  Perry S.

• Model number latest Sansa Fuze 4 GB pink

  I found two different model numbers for this element.  I want to make sure that I get a newer than an older model.

  Amazon has this model number: SDMX14R004GPA57

  And this site and Wal-Mart has listed as: SDMX14R004GPA70

  Any information would be greatly appreciated.

  Cindy

  Why? There is no functional difference between the 2, interfaces are the same, as is reading. The difference between v.1 and v.2 is some slight physical differences, and release date. I would therefore ask again why a v2 on a v1?

• Crush the model number?

  When I try to download Motorola Phone Tools, I get to the point where I enter the model number of my phone (Motorola Crush). It is not listed as a favorite in the column of the drop-down list. The crush has a model number?

  Thanks in advance

  Model number is R3QTR

• What battery does the dm4x? Or what model number is the dm4x?

  I just ordered a dm4x of Costco, which comes stock with a battery 6 cells.  I would also like to order the upgrade battery 9 cells, but I have no idea what battery model it has need.

  There is no number listed as a dm4x model, so I would say I have the dm4-1000. or the dm4-2000 maybe?

  The computer can't for two weeks, so I don't have the tag to refer to another and surprisingly the model number does not appear in one of the specs on the site of hp or costco.

  I think that the MUO9 is compatible with the dm4x, but I would really like to know for sure before you buy.  If another user of dm4x tell me what battery they use, or maybe what model they have, it would be greatly appreciated. Thanks in advance for any help

  For anyone else who may be looking in the dm4x:

  The product number is LX130AV

  It indeed takes the MU09

• ESXi host bios version and server model number

  Hi all

  I have the script that will display the version of the bios of the esxi host.

  can we add more lines to get the server esxi host (such as Dell R910, R720... model number HP, IBM) with serial numbers. and export it in excel or csv format.

  Script to get the version of the bios is listed below.

  $report = @)

  Get-view ViewType - HostSystem | %{

  $row = "" | SELECT name, "BIOS Version", "BIOS Date"

  $row.name = $_.name

  $biosTemp = ((($_.)) Runtime.HealthSystemRuntime.SystemHealthInfo.NumericSensorInfo | Where {$_.} ({Name: like "* BIOS *"}). Name - split "BIOS") [1] - split "") ""

  $row. "" BIOS version "= $biosTemp [0]

  $row. "" Date of the BIOS ' = $biosTemp [1]

  $report += $row

  }

  $report

  his put Out just like that

  
  

  

  Thanks to all in advance

  This is the version of the firmware of a network card.

  This can be done like this

  Get-view ViewType - HostSystem |

  Select Name,

  @{N = "BIOS Version"; E = {}

  $script: biosTemp = ((($_.)) Runtime.HealthSystemRuntime.SystemHealthInfo.NumericSensorInfo | Where {$_.} ({Name: like "* BIOS *"}). Name - split "BIOS") [1] - split "") ""

  {{$script: biosTemp [0]}},

  @{N = 'BIOS Date'; {E = {$script: biosTemp [1]}},

  @{N = 'Seller'; E={$_. Summary.Hardware.Vendor}},

  @{N = ' series'; E = {}

  $script: esxcli = Get-EsxCli - VMHost $_. Name

  $script: esxcli.hardware.platform.get (). SerialNumber

  }},

  @{N = "Firmware NIC"; E = {}

  $script: esxcli.network.nic.get ('vmnic4') .driverinfo .firmwareversion

  }}

• What's new with models of different list

  Hello

  I have created a web application to my Rotator news on this site http://www.dandmrural.com.au and I would like to know how I can create a link on the article year CRT retailer directly to the PDF rather than the rest of the article {tag_itemurl_withhost} for certain items, so they don't have to do 2 clicks to open the pdf and other items she's following the story (like the element McLellan).

  My list template code is

  < div id = "content-" >

  < img alt = "" class = "& rdquo; image & rdquo; ' src = ' {tag_image_value}? Action = miniature & amp; Width = 300 & amp; Height = 300 "& algorithm ="fill_proportional & quot;"/ > < br / >

  < h3 > {tag_name_nolink} < / h3 >

  < p > {tag_intro} < a href = "{tag_itemurl_withhost}" > read more < /a > < /p >

  < / div >

  I thought I could use a model of alternative list with the following code, but I don't know how to say each element which model to use:

  < div id = "content-" >

  < img alt = "" class = "& rdquo; image & rdquo; ' src = ' {tag_image_value}? Action = miniature & amp; Width = 300 & amp; Height = 300 "& algorithm ="fill_proportional & quot;"/ > < br / >

  < h3 > {tag_name_nolink} < / h3 >

  < p > {tag_intro} < a href = "{tag_url_pdfs}" > read more < /a > < /p >

  < / div >

  Any help would be greatly appreciated.

  See you soon,.

  Tammy

  You can't define a model on a per-article basis, unless you have a limited number of items and make each of them individually.

• Hello, my iphone model number is MKQL2GH / A... What is the region of GH?

  Hello, my iphone model number is MKQL2GH / A... What is the region of GH?

  Do you get this model in settings > general > topic? I can't find a region code of GH.

• I could find Air play in my iPad serial number F7 * P84. Model number is A1432

  MY model number of iPad A1432 with serial number F7 * P84.

  I couldn't find Air play in my iPad

  < personal information under the direction of the host >

  AirPlay are in Control Center (wide upward from the bottom of the screen). But don't appear when the iPad is close to a receiver Airplay as an Apple Tv.

  

  You are near an Airplay compatible receiver?  Connected to the same Wifi network as the Airplay receiver?

  Please do not post your serial number on a public forum. The model number is sufficient.