ESXi host bios version and server model number

Similar Questions

• HP 2000-2061TU: How can I upgrade my graphic card in my laptop and my model number is hp 2000-2061TU

  How can I update my graphic card in my laptop? and my model number is hp 2000-2061TU

  Please help me...

  Hello
  
  Could you confirm the model name?
  
  It is the following:
  2000 2106TU?
  
  http://support.HP.com/in-en/product/HP-2000-notebook-PC-series/5259209/model/5269792/document/c03454511/
  
  If so, no, you can not - your laptop does no graphics "card", the graph is integrated type Intel Celeron processor.
  
  Manual: http://h10032.www1.hp.com/ctg/Manual/c03308228
  
  Concerning
  
  Visruth

• What version of esxi supports Windows 8 and Server 2012

  We have ESXi 5.0 and vSphere 5.0.

  I want to make the smallest upgrade for our VMware supports Windows 8 and Server 2012.

  What upgrade do I do?

  According to the matrix of product interoperability VMwarevCenter Server 5.0 (without update) supports ESXi 5.0 Update 1 guests too.

  André

• ESXI hosts 5-2 and the best way to configure vSwitch and Nic redundancy

  Hi all

  Could someone help me find the best way to configure the vNetwork on 2 5 ESXI host for redundancy.  Once I managed to correctly configure the 2 hosts I will seek to use the same installation process for 6 guests.  3 sites with 2 hosts on each site managed all of vCentre Server

  I have 2 DL380 G7 servers 5 ESXI installed on a class 10, 8 GB SD card, I'm looking to install VSA on the 2 hosts on each server with 4 TB of internal storage (8 * 600 GB 10 k SAS).  Each server has a gigabit integrated 4-port NIC and I installed a 2nd NIC gigabit PCIe 4 ports, I also x 2 16 switches of port with Layer 3 routing.  I use vSphere 5 Standard acceleration Kit I am looking to use vCentre server for managing, vMotion for maintenance, HA for the failover and VM 10/15 (vCentre Server Std, DB SQL to vCentre Server, Exchange 2010, SQL Server 2008 R2, IIS Intranet, Helpdesk, 1 DC, 2 Domain Controller, AV Server, WSUS, SCCM Server, and Terminal Server server).

  What would be the best way to install and configure the network for performance and redundancy and am I missing something?

  My thoughts are, Teaming: -.

  vCenter - vswitch0 - port1 on NIC1 and port1 on NIC 2 - port1 on NIC1 to physical switch 1 - port1 on NIC2 to physical switch 2

  vMotion - vswitch1 - port2 on NIC1 and port2on NIC 2 - port2 on NIC1 to physical switch 1 - port2 on NIC2 to physical switch 2

  HA - vswitch3 - port3 on NIC1 and port3on NIC 2 - port3 on NIC1 physics 1 - port3 on NIC2 to physical switch 2 switch

  VM - vswitch4 - port4 on NIC1 and port4on NIC 2 - port4 on NIC1 to physical switch 1 - port4 on NIC2 to physical switch 2

  or do I need an additional NIC on each server to hit the VM 12-6 VM for 2 ports on 2 NETWORK interface card, or maybe something else I missed?

  Thank you

  In your case, to keep it simple and what I can say here is what would be my recommendation:

  3 standard vSwitches

  vSwitch0:

  • Management - vmnic0, vmnic2

  vSwitch1:

  • vMotion - vmnic1, vmnic3

  vSwitch2:

  • VM network - vmnic4, vmnic5, vmnic6, vmnic7

  The only reason why that I didn't split the VM in other network adapters shipped is because the difference in the types of the DL380 adapter shipped and the PCIe quad.

• How to extract the selected ESXi host user name and the password in the web client of vSphere?

  Hi all.

  I'm developing a plug-in for the web client to vsphere. I want to communicate with the selected host of ESXi in my Java Service Layer and who needs the host user name and password.

  I don't know how to search the Flex user interface layer.

  ESXi credentials are not stored in the user interface layer, you must use the vSphere SDK Web Service on the coast of java.  See vim.host.ConnectInfo.

• Satellite A100-003: Question about RAM and recording model number

  Dear Sir/Madam,

  1. the first problem is that I bought the notebook of Toshiba Satellite A100-003 model. But when I tried to save the European web site of Toshiba with my serial number it says Satellite A100-011. I do not understand what it means that. But I do not know my phone model A100-003-PSAARE-0470257Z. The serial number of my laptop is: 17739127G

  2. Another problem is the European website of Toshiba and Turkey Toshiba official site (http://www.toshibatr.com/notebook_filter.asp?ktg=A100) says Rams are 533 MHz "2 048 (1, 024 + 1, 024) MB of RAM DDR2 (533 MHz)"but mine is at 266 MHz. "

  http://img510.imageshack.us/my.php?image=satellitea100003xg4.jpg

  I was wondering in Toshiba laptops of the Turkey has problems or handed in state something? I sent e-mail to the web site of Toshiba Turkey but they don't send me emails or information.

  Thank you for helping me,
  Halin

  Hello

  First of all your registration number is not a 'problem '. Maybe it s just a small mistake in their database. When I registered my P200 registration reported me another type as mine was, but after a call to the hotline of toshiba told me, that my machine is listed correctly in the database.
  Don t worry, register just she.

  With regard to the RAM:

  Do you know why's called it 'DDR' ram? That means 'RAM memory' and the goal is to double the frontsidebus.

  In your case, that means: the REAL AND PHYSICAL frontsidebus is 266 Mhz, but because the flow is double you have a 533 MHz frontsidebus (532, 34.Mhz).
  CPU - Z and WCPUID are simply display the physical clock of the RAM, but the frontsidebus double the signal and then you pure and authentic to 533 MHZ.

  I hope I could explain something to you. ;)

  Have a nice weekend

• ESXi host report CPU and memory usage

  Hi all

  I'm looking for a script that exports CPU ESX host and use of MEM in below format

  HOST use CPU % MEM %

  70 30 host1

  30 50 host2

  Concerning

  Pankaj

  Try something like this

  Get-VMHost | Sort-Object -Property Name |Select Name,State,  @{N="Status";E={$_.ExtensionData.Summary.OverallStatus}},  @{N="CPU%";E={[Math]::Round(100*$_.ExtensionData.Summary.QuickStats.OverallCpuUsage/($_.ExtensionData.Summary.Hardware.CpuMhz*$_.ExtensionData.Summary.Hardware.NumCpuCores),0)}},  @{N="Mem%";E={[Math]::Round(100*$_.ExtensionData.Summary.QuickStats.OverallMemoryUsage*1MB/$_.ExtensionData.Summary.Hardware.MemorySize,0)}}
  

• What will be called the ESXi new/next version and...

  How and where can I sign up for the BETA or RC for the next latest and greatest version?

  As much as I KNOW, you cannot sign up for beta more for vSphere.  If you have a TAM, you can communicate with him to see what they can do.

• Ask for the old version and serial number

  I just installed Adobe Acrobat Pro DC after using a trial version.  When I open DC Pro, serial number validation is OK, but then it asks for an earlier version and the serial number.  I have DC drive installed that I downloaded from the Web site of my school.

  What you describe seems to indicate that you have purchased an upgrade, which requires you to prove that you are eligible indicating the old version and by providing its serial number.

• Need help PowerCLI with recovery ESXi host Asset Tag Info

  In the hope that someone, anyone, will be able to help me understand what I can do wrong and how to use PowerCLI to retrieve valid ESXi host Asset Tag information that appears in the tab material status vCenter. I have absolutely no problem of recovery of the serial numbers of host (sometimes referred to as Service Tags), manufacture, model, part, build, etc., but don't can't seem to be able to interrogate the current numbers of inventory number .

  None of the following attributes or property values currently returned the information required and which exists (see image below):

  Hardware.SystemInfo.OtherIdentifyingInfo [0]. IdentifierValue

  Hardware.SystemInfo.OtherIdentifyingInfo [1]. IdentifierValue

  Hardware.SystemInfo.OtherIdentifyingInfo [2]. IdentifierValue

  Hardware.SystemInfo.OtherIdentifyingInfo | where {$_.} IdentifierType.Key - eq "assettag" IdentifierValue})

  

  This is the script that I am running. I used PowerCLI Version 5.1:

  $VIServer = 'enter vCenter Server Name'

  
  # Add component snap kernel PowerCLI
  If (!) () Get-pssnapin-name VMware.VimAutomation.Core - erroraction silentlycontinue)) {}
  Add-pssnapin VMware.VimAutomation.Core
  }

  SE connect-VIServer $VIServer

  $HostReport = @)

  $VMH = get-VMHost | Get-View | % {}

  $Report = "" | Select the host name, Version, build, manufacture, model, series, Asset Tag

  $Report.Hostname = $_. Name

  $Report.version = $_. Config.Product.Version

  $Report.Build = $_. Config.Product.Build

  $Report.manufacture = $_. Hardware.SystemInfo.Vendor

  $Report.Model = $_. Hardware.SystemInfo.Model

  $Report.Serial = $_. Hardware.SystemInfo.OtherIdentifyingInfo [0]. IdentifierValue

  $ Tag = Report.Asset?

  $HostReport += $Report
  
  }

  $HostReport | Export-Csv «.\HostReport.csv"- NoTypeInformation

  Disconnect-VIServer-confirm: $false

  Ron thx.

  As far as I know, has nothing to do with PowerCLI, this is how vCenter gets this information, and how and where some HW providers make this information available.

  With the interface of the CIM, you can dump all the available information and then find exactly the tag died murdered.

  See what this returns

  import-module CimCmdlets$esxiHostname = "MyESXiServer"$HostUsername = "root"$CIOpt = New-CimSessionOption -SkipCACheck -SkipCNCheck -SkipRevocationCheck -Encoding Utf8 -UseSsl$Session = New-CimSession -Authentication Basic -Credential $HostUsername -ComputerName $esxiHostname -port 443 -SessionOption $CIOptGet-CimInstance -CimSession $Session -ClassName CIM_Chassis
  

  You will be asked the password root ESXi.

  On some of our older IBM HW, I get the following where we expect the identification sticker.

  

  But the information is there, just to another property.

  As we have already mentioned our VMworld session, exploring the CIM API.

  There is a lot of information in there

• Update BIOS Satellite L20-121 model: PSL20E

  Hello
  I want to update bios v1.10 for v1.80. I downloaded the version of victory, but the following error:
  Part ID of the system BIOS and the new Image file are different (System = EW5 EW6 = lead). The system platform may be different from the Image file. You sure you want to continue?

  What should I do? Go forward or not?
  PS: I looked up the Bios updates with the model number of the laptop.

  Post edited by: newsalex

  Hello Alex

  I put t know how old is your device exactly but AFAIK Satellite L20 is fairly new to laptop and I really want to know why you want to update BIOS.
  You have problems with your device, or you want your device is updated?

• Solo upgrade VCenter 5.5 e non esxi host

  Ciao a tutti!

  Al momento e uso VCenter 4.1 host esxi 4.1

  I like to do solo upgrade Vcenter del went 5.5 (Gli nei mesi as host)

  Ho aperto one ticket per sapere is era possibile e mi hanno detto:

  Yes, you can upgrade your server vCenter to 5.5 and you can manage your ESXi host with version 4.1.

  Ho aperto a ticket by the licenza altro e mi hanno risposto ncosi:

  If I understand correctly, you want to upgrade the server vCenter Server to version 5.5 and want to know if the ESXi must be upgraded too.

  If you upgrade the server vCenter Server to version 5.5, then the server ESXi also need to be updated to the same version.

  Morale della favola? posso procedere con is it vcenter?

  Grazie!

  the che cerchi e risposta whichproduces VMware interoperability matrices

  MI pare che sia compatibile con he vcenter 5.5u2 ESXi fino alla 4.0.

  Perched non upgradare gli host good?

  Dai talk anche uno who VMware Compatibility Guide: search system

• ME of ESXi host

  Hi all

  I have a doubt about the ME of ESXi host. I know, it is assigned by vCenter Server ESXi hosts & when each and every host have even number of data store, it is used to set the master host in cluster HA.

  My question or doubt is-

  When he is assigned to the host? At the time of the addition when adding in vCenter Server Instance or cluster HA? Please clearify?

  IIRC when adding to vcenter, I don't think it changes.

  Here's something interesting:

  The electoral process is defined by an algorithm with two published rules. For the first time, the host with access to the largest number of victories of data warehouses. In case of tie, the second rule comes into play: the host with the lexically highest Managed Object ID (ME) is chosen. When the attempt to rig these elections as lexically here means, for example, this host-99 is actually greater than host-100.

  http://www.windowsitpro.com/article/virtual-machine-VM-virtualizationserver/vSphere-5-FDM-master-141016

• I bought Creative Suite 2 Premium years previously, and now "serial number is invalid.

  The applicatioon cannot continue and must now stop", I can't use more?

  CS2, Acrobat 7 + Audition 3 (AND PREVIOUS) activation server has disappeared, then read below

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  .

  You MUST use the special version and the serial number on the page, not your original drive or serial number

  .

  NOTE that CS2 will not install on a "modern" with an Intel Mac

  When you install the special version of the PPro2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option

• Create the role in each ESXi host

  I need to create a 'Test' role with only 'Browse datastore' on each ESXi host in the vCenter server.

  OK, I see, you need a role on each server ESX (i). It is possible both with the cmdlet New-ferrule.

  Get-VMHost | %{

  $esx = Connect-VIServer-Server $_-user root - password $pswd

  New-ferrule-name Test-"Datastore.Browse" of privilege-Server $esx

  Disconnect-VIServer-Server $esx - confirm: $false

  }

  The script will connect to each ESX (i) server, create the role on the (i) ESX Server (with the server parameter) and disconnect.

  You will need to have the root password in the $pswd variable.