Models and real space used

Similar Questions

• Why I don't see (created with my iPhone 5 s) forms in the creative clouds (for iOS) and the space used in CC is 0 MB? Where are they kept?

  I installed Adobe forms on my iPhone (iOS 8) and don't see, where the forms are stored.

  In CC app for iOS, there is no files (and the space used in CC is 0 MB). And I do not see my shapes in your other apps (for iOS: ideas, Photoshop Mix).

  How to export shapes for the storage of files?

  Content in your libraries CC is currently not available on the CC iOS app.  You can see it online.  But, not in the app native iOS... yet. I hope that the CC app will have this feature soon.

• What are the models and how he uses a?

  I'm migrating TheBat! (on Windows XP) to TBird (on Xubuntu 12.04.4) and the terminology used by both programs is radically different. I find TBird pages 'help' was almost exclusively on new users who don't know about e-mail, with no details available to help people in my situation to get on the same page.

  You can read about them here.
  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Using_Templates

• Space used (%) surveillance for tablespaces

  Hello world
  
  I am currently using:
  RedHat Linux ES 5 2.6.18 and also
  Oracle 10g Release 2 for Linux x 86 R10.2.0.3
  
  While listening to my storage using OEM Database Control spaces, I noticed that two storage spaces were almost full.
  
  [SYSAUX] - size: 290 MB, used 283 MB (97% full)
  [SYSTEM] - size: 320 MB, used 313 MB (98% full)
  
  When I try to locate these two spaces of storage data files in his directory (/ home/dba/oracle/oradata/oracle), it shows the allocated size (290 MB for sysaux01.dbf) & 320Mo for system01.dbf and not the space used.
  
  I have three questions to ask here:
  
  1. why it is not warnings or alarms, even if spaces storage is greater than the critical size?
  [2nd-how come the files of data shows the size allocated tablespaces and not used space?]
  3 - How can I find and monitor the real space of the tablespaces used?
  4. I enabled the AutoExtend feature, but I'm you worry if there is any other it related?
  
  I'm still very new here.
  Please forgive me for all that is wrong.
  Looking forward for your expertise, advice and help.
  Thank you for your attention.
  
  -Eyes-
  
  ++ Kef Lim ++

  Hello

  1. why it is not warnings or alarms, even if spaces storage is greater than the critical size?

  1 oracle never show any warning about space to reach its critical position. It will just pull a mistake when he soenot find the space. You can create alerts in your database to accomplish your task.

  [2nd-how come the files of data shows the size allocated tablespaces and not used space?]

  Data files show the total size of alliocated to them. You are just lookingg at the level of the operating system and files are the total for this tablespace size poster because total space is allocated at the same time when you create the tablespace. Space is not large, they are required. That's why it shows the total space.

  3 - How can I find & watch the real space of the tablespaces used?

  To learn real space used in particular tablespace, that you must use DBA_DATAFILES and DBA_FREE_SPACE views database. To view the free space use the following query.

  Select
  FS.tablespace_name 'space ',.
  (df.totalspace - fs.freespace) "Used MB."
  FS. FreeSpace 'MB free.
  DF. TotalSpace 'Total MB. "
  round (100 * (fs.freespace/df.totalspace)) "Free PCT."
  Of
  (select
  nom_tablespace,
  Round (Sum (bytes) / 1048576) TotalSpace
  Of
  DBA_DATA_FILES
  Group
  tablespace_name
  ) df,.
  (select
  nom_tablespace,
  Round (Sum (bytes) / 1048576) FreeSpace
  Of
  dba_free_space
  Group
  tablespace_name
  ) fs
  where
  DF.tablespace_name = fs.tablespace_name;

  4. I enabled the AutoExtend feature, but I'm you worry if there is any other it related?

  There is no concern about using the function of other autoexten that it will work until you have hard tyour space on disk where the file is placed.

  hope you get the answers and it helped.

  Kind regards
  Navneet

• Qosmio G30(Japanese model) and television in Australia,

  Hello
  I bought a Qosmio g30 Japan about 6 years ago. I have now returned to Australia and want to watch TV on the qosmio. The cables provided to the Japan do not fit the connection of the antenna into the wall in Australia. I guess that I'm not the only person who has a Japanese model and wants to use it in Australia. Nobody knows what kind of converter plugs that I need?

  Any help is good.

  Pat.

  Hmm maybe you can order this adapter to a Toshiba ASP in your country
  Otherwise, you will need to check some special electronic merchants in downtown, perhaps they could provide an extra adapter for antenna cable

  Good luck

• How to interface a simple way using LabVIEW 2009 simulink model and SIT?

  Hello

  I finally found a way to use a template simulink with LabVIEW and the Toolbox to SIT, but I'm not satisfied.

  If you have any suggestions, the link of resource that I missed, please do not hesitate to answer

  Note that I do not know much about simulink, so that is my question seems stupid, let me know what

  Software configuration

  OS: Windows (not an RT target)

  LabVIEW 2009

  SIT 2009

  question 1: interfacing the model DLL (mapping considerations) with a driver VI

  We have created a model of DLL by using the 'Workshop in real time' tab in simulink.

  In LabVIEW, launch us the tool 'SIT connection manager' and try to use the DLL with a driver VI by mapping the e/s model for screw/lights orders.

  The fact is that I fail to connect to my controls/indicators VI/o model because they do not appear in the mapping dialog box.

  The simulink single objects that I managed to map are "constant" and "test points" while I need to edit the template simulink itself (example below)

  

  Are in e/s model, not considered as part of the parameters of the model? (this could make sense because the mapping says in fact that it operates on "model parameters")

  Is it possible to link the IO model VI commands/lights?

  Note:

  -the "configure HW i/o mapping" dialog box allows me to map model e/s with e/s HW...

  -The examples also use these "constant" and "test points".

  2nd question: use of direct screw SIT

  I tried to use the DLL directly with the screws SIT (code example below)

  This kind of code works well on another project (target of 8.0/RT LV) but not on the current project (LV 2009/Windows)

  The second stage of the model never ends:

  -0-index of the loop works as expected (model doing its job).

  -index of the loop 1 starts normally, but execution is stuck in the 'SIT scheduler.vi.

  Then I have no choice that to kill LabVIEW ("Reset screws" windows appear if I try to stop/close them).

  

  Is there a reason that I do not see what explains this behavior?

  Thanks for reading.

  Any help appreciated.

  Kind regards

  Hello

  I spent some time analyzing the VI driver as you suggested.

  Here are my findings.

  Question 1: the SIT connection manager does not pass to the model SW controls/indicators. Only, it allows the user map HW AIs/AOs.

  The only solution I found (to have a SW - for example a shared variable - object that is mapped to an input/output model) is to customize the VI driver that is scripted by the SIT Connection Manager ("_Baserate Loop.vi" in the flat sequence structure named "read code")

  Question 2: after spending some time in the VI driver, it seems that the VI to call right is not 'SIT scheduler.vi' but 'If SIT take model no time' (which uses the other as a Subvi)

  

  My conclusions are correct? If I use the API in the wrong way, please let me know.

  Kind regards

• JSF - lack of source code using the creation of models and composition

  It's really strange, or maybe I don't understand JSF.
  
  Supposedly to make the long story short, I have the following:
  
  a. masterLayout.xhtml file - primary model
  b. file myPractice.xhtml - compositions that uses templates to file masterLayout.xhtml
  
  masterLayout.xhtml page go to myPractice.xhtml (using ajax). The myPractice.xhtml rendered correctly - shows all components of the model and its own page. But when I check the "see source code page", I see the source code of masterLayout.xhtml.
  
  Here is the part of the source code:
  
  IMPORTANT NOTE: masterLayout.xhtml has a COMMANDBUTTON RICHFACES (a4j:commandButton) WHICH RENDER THE PANEL ID "MyPractice" FOUND IN myPractice.xhtml. Means that this rendering of the page via ajax commandButton control.
  
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  masterLayout.xhtml (model)
  
  :
  < a4j:commandButton styleClass = "#{control.myPracticeStyle}" value = "MY PRACTICE" action = "myPractice' actionListener =" #{control.myPracticeAction} "make = 'myPractice' / > '.
  :
  < style tr = "height: 780px;" >
  < style td = ' width: 8%; ' > < table >
  < style td = ' width: 8%; ">
  & #060; br / >
  < name ui:insert 'content' = >
  < / ui:insert >
  < table >
  < style td = ' width: 8%; ' > < table >
  < /tr >
  
  < /table >
  
  < / rich: panel >
  
  < / h:form >
  
  You can see the ui: insert above.
  
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  myPractice.xhtml
  
  "< ui:composition template="/templates/masterLayout.xhtml ">
  
  < ui: set name = "content" >
  
  < id rich: panel = "myPractice" style = "height: 764px; border: 0px; padding: 0px; ">
  
  < table width = "100%" border = "0" cellpadding = "0" cellspacing = "0" >
  
  < b >
  
  < style td = "width: 100%;" >
  
  < h:panelGrid style = "width: 100%;" cellpadding = "0" cellspacing = "0" >
  
  < f: facet name = "header" >
  
  < h:panelGrid style = "width: 100%;" cellpadding = "0" cellspacing = "0" columns = "5" columnClasses = "overviewTabColumn, aumTabColumn, feesTabColumn, cashFlowTabColumn, emptyTabColumn" >
  
  < a4j:commandButton styleClass = "#{control.overviewStyle}" value = "OVERVIEW" action = 'Preview' actionListener = "#{control.overviewAction}" make = 'Preview' / > '.
  
  < a4j:commandButton styleClass = "#{control.aumStyle} ' value = 'AUM' action = 'aum' actionListener =" #{control.aumAction} "make = 'aum' / > '.
  
  < a4j:commandButton styleClass = "#{control.feesStyle} ' value = 'FEES' action = 'fees' actionListener =" #{control.feesAction} "make = 'fees' / > '.
  
  < a4j:commandButton styleClass = "#{control.cashFlowStyle}" value = "CASH FLOW" action = "Cash Flow" actionListener = "#{control.cashFlowAction}" make = 'Cash Flow' / > '.
  
  < h:outputText value = "" style = "width: 100%;" / > "
  
  
  < / h:panelGrid >
  
  < / f: facet >
  
  < / h:panelGrid >
  
  < table >
  
  < /tr >
  
  < b >
  
  < td > < table >
  
  < /tr >
  
  < b >
  < td >
  < name ui:insert 'subContent' = >
  < / ui:insert >
  < table >
  < /tr >
  
  < /table >
  
  < / rich: panel >
  
  < / ui: define >
  
  < ui:composition >
  
  This set define supposed to go in the ui section: masterLayout.xhtml insert.
  
  ===================================================================================================
  
  Source of real "see Page" FireFox or IE when myPractice.xhtml is made and displayed.
  
  < style tr = "height: 780px;" >
  < style td = ' width: 8%; ' > < table >
  < style td = ' width: 8%; ">
  & #060; br / > < = missing source code?
  < table >
  < style td = ' width: 8%; ' > < table >
  < /tr >
  
  < / div >
  < div >
  
  "< input type ="hidden"name ="javax.faces.ViewState"id =" javax.faces.ViewState "value ="-2088890247043631074:-2632132869735171398 "
  AutoComplete = "off" / >
  
  < / make >
  
  < / body >
  
  < / html >
  < / ui:composition >
  
  If you look at this "source code" view Page"carefully comparing to masterLayout.xhtml, from the height: 780px, you will notice the name of ui: insert section = 'content' is... empty.

  When you "view source" you made an another GET, that renders the page in its original state. It is not the source as it is currently displayed for example after a button push.

• I created a budget using models and cannot change it

  I created a budget using models and cannot change it.  When I open it I can't do anything with it!  I'm stupid or what?

  Like Emily Litella, Neve rmind!

• No picture but sound using WMP and Real Player after update 8.1 Win

  Also good windows media player and real player does not display a video but will play sounds (from the video) after the upgrade.

  Microsoft not interested in the problem and real cannot advise on the issue once the configuration ompatibility option didn't work.

  Ideas on the Windows 8.1 that I was fired by Microsoft to the OEM supplier.
  Everything worked perfectly well in Windows 8.0.

  I am running 64 bit.

  Hello

  I gues due to lack of information it would be difficult to help you.
  You haven't posted anything on your laptop model.
  Also you says nothing about the video files you want to play.

  Did you update all drivers and utilities on your laptop after the 8.1 of Windows upgrade?
  If your laptop is Win 8.1 supported, you must pass the Toshiba drivers and tools as described in the installation instructions (you will find on the website of driver Toshiba)

  By the way: I have similar problem hade a few years ago reading movie in DiVx format.
  I had to install the DivX Codec. I installed the K-Lite Codec package, which contains the essential codecs

• My space Icloud is used because of the backup of the Ipad and I use three devices under ID so my iphone always gives the warning of small footprint. How can I save the back upward on my PC so that I can delete of I have cloud and free space

  My space Icloud is used because of the backup of the Ipad and I use three devices under ID so my iphone always gives the warning of small footprint. How can I save the back upward on my PC so that I can delete of I have cloud and free space

  Hello

  You want to know is explained here: https://www.apple.com/support/iphone/backup/

  If you want to delete the backups that are currently clogging up your iCloud-storage space, use this: iCloud: delete a backup device iOS to iCloud

• I want to view the properties of folders of files and the size of the files used on the right by clicking on them and the properties of the workstation to see the disk space used. __

  I have trouble finding the disk space used by files and folders individually and when I try to know how much is consumed and free by right click on my computer.  This was easy in XP, but I can't get the answers I need to analyze which uses space, where and how.  What is happening with this?

  Hi NativeLegal Eagle,

  Usually, right-click on the file or folder and clicking the properties option will give the details of the file or folder. The details include, type, size, location, size of the file on the disc etc.

  Make a right click on my computer will not give the details of available disk space on the computer.

  If you want to know the amount of space consumed by a program, then it can be found in the Add/Remove Programs window.
  a. Click Start, click Run, type appwiz.cpl, and then click ok.
  b. in the list, we can find the total space used by individual program running on the computer.

  Note: If nothing is listed in the file properties window or a file, then provide us with more information, so that we can better help you.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I want to hang the Tower up to my big screen and instead of using a keyboard, I bind a tablet that I can use as a keyboard and to manipulate objects on the screen in real time

  I am in the middle of do a remodeling and think about a furture upgrade my PC at home, I want to hang the Tower up to my big screen and instead of using a keyboard, I want to connect a tablet that I can use as a keyboard and to manipulate objects on the screen in real time. Is there a way to do this?

  (1) before the PC upgrade, please read the complete technical documents for all devices

  you want to go to upgrade

  (2) it is the first thing to do to make complete lists of materials you want to change.

  Compare specifications detaily, note important diference between many of the same features

  (3) for more information on some devices and materials, see link below

  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us

• Is this possible? I have less free space on the C drive, and I have exactly 56.998 space USED (s)

  I have less free space on the C drive, and I have exactly 56.998 space USED (s)... Here is the photo that explains everything...

  http://i45.Tinypic.com/eklpja.PNG
  P.S 
  I recently installed a new Windows 7 because my PC was crushed.

  Adding sizes show in various properties of the folder does not show the actual space consumed.

  This free utility can reveal information relevant and that is using the space

  http://www.Jam-software.com/treesize_free/

• I am trying to perform a static check on the model. When I double click the model and go to the tab control... There is nothing to select in the knowledge module. I want to use CKM here... but nothing appearing in the drop-down menu. The global KMs are no

  I am trying to perform a static check on the model. When I double click the model and go to the tab control... There is nothing to select in the knowledge module. I want to use CKM here... but nothing appearing in the drop-down menu. The global not supposed to KMs the listed here?

  Hello

  You have imported the whole CKM in modules of knowledge?

  If not, import ckm and do it.

  Kind regards

  Gangareddy.k

• Windows 2008 R2 NIC disconnected when converting from a model and started using workflow start-vm in VCO

  Hello

  Have a very strange problem. I wanted to apply patches using a VCO on my model R2 2012 Windows workflow and Windows 2008 R2 models. My model of Windows 2008 R2 when converted and started by the workflow VCO does NOT get an ip address. Yet, when I manually turn on the model of Windows 2008 R2 after be converted manually, it gets an ip address immediately. So weird.  There is no problem with 2012 Windows, it works very well. NOTE: The workflow that starts the virtual machine only turns on (and is built in the workflow built by vmware) Finally, today I built a new model and has the same problem. NIC is VMXNET3 and problem seems of course specific OS, has anyone seen this before?

  Thank you

  I found this article and fix it. It resembles a known issue with VSphere 5.1

  VMware KB: Registration or the deployment of a VM template fails