Qosmio G30(Japanese model) and television in Australia,

Similar Questions

• Qosmio G30 display flickering and cannot connect to Windows

  I have to press F5 to make the visible display each time that I boot. I thought that it was a software related issue and I tried to format the drive with recovery CD original. However, the screen keeps flickering of the stage of the BIOS.
  Now, it's even worse. The screen flashes when the turning on and I cannot Ouvrezunesession Windows MCE after formatted HARD drive.

  After reading the FAQ and related articles, I suspect that it was a problem of graphics (hardware).
  My graphics card is NVidia Go7600. Is this true, and it's a must to change the hardware (graphics card)?

  Appreciate your advice before contacting the local support team.

  Thank you very much!

  Hello!

  That s a strange question. Do you have the same problems on an external monitor?

  If a display is flashing, the screen itself is faulty, the FL tube is the cause of the error. I think that is the best, when an ASP (authorized service provider) checks your Qosmio G30.
  Here you can find one:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

  Good luck

  Good bye

• Some problems with Qosmio G30-179 - remote and TV

  Hello, (I am French and my English is bad)

  I have a Qosmio G30-179 and I can't use my remote when the computer's power on. But I can use the remote to turn on my computer and I can use it when I use the TV and media keys (on the right of the power button).

  Another problem: I get nothing when I search for a signal TV on Media player. Even if I'm in a place where I already receive all TV channels. Maybe they had some problems undetected...

  All these functions have already worked and I realized that they do not work there is little time. But I don't use them for a long time, since I have received my computer, when he came back guaranteed (I send them because he had a problem in the bars of RAM.)

  Then, I think that there was a problem with the service. But I'm not sure.

  What do you think about this? Should I call them?
  Or this problem can be easily resolved?
  Thank you in advance.

  In this case, it is really not easy to give advice quite simply. If you are looking for the simplest solution I recommend you save all your data and install OS using recovery DVDs. After that make this laptop will have factory again and I hope that it will work as before.

  Good bye

• Qosmio G30-145: WinXP and RAID driver - no response

  I did everything that is needed for the installation of windows xp for Qosmio G30-145.

  Installation process is as a result: as in http://support.toshiba-tro.de/kb0/TSB56012H0001R01.htm and that worked, but during the installation of windows has started, you will be asked once more (first time I did format and second time that I did ' t format HARD drive): "INSERT THE DISK LABELLED"TOSHIBA RAID DRIVER"in the A: drive... "Press on enter when ready '- but no reaction... SOLUTION!

  Thanks in advance.

  Hello

  According to the Toshiba page suggested when installing Windows using to partition or format the HARD drive, the RAID driver is deleted in the process. This causes the shot the next time that the machine start-up.
  To avoid this, perform a partitioning and formatting before you run the manual installation of Windows.
  This behavior is not displayed during the installation of Windows XP with SP2 integrated

  Well, perhaps, you need a CD OS Win SP2 integrated?

  But why you do not use the recovery CD Toshiba delivered?
  On this CD, all drivers are preinstalled and you only need to install the OS from the recovery CD. All should work properly.

  PS: Just for the record: in the BIOS, you should find an option to disable (or change) the RAID.

• Qosmio G30-155 Vista and cannot install XP

  Hello

  I have G30/155 laptop with pre-installed Vista and I want to install XP on the second HD (D :).
  How can I do? The stop to start installation process.
  When I put the installation CD, the installation does not start!
  The media are OK and CD/DVD drive too

  Concerning

  Hello

  I presume that the Qosmio G30 supports RAID technology. Did you install the RAID driver until you have followed with the installation of Windows?

• Problems with the TV and WXP MCE on my Qosmio G30 Japanese tuner

  Hello everyone,

  I bought my G30/593ls to the Japan. The operating system included it was the WXP Home edition, instead of the MCE. To watch TV, a program called avcenter was included. Unfortunately it is only available in Japanese. Then I looked around and found that, in all other countries THAT MCE was shipped with the laptop. Since I wanted to change to another OS even when (my Japanese is not good ^^) I thought why not MCE.

  Right now I have the problem that after installing WXP MCE on my computer and it does not recognize my TV tuner. I'm sure that the tuner works, because when I use the media center I can watch TV. I used the same driver that was installed when I bought the computer.

  Maybe it has something to do with the fact that the tuner of my version is not TNT but ISDB-t?

  Thank you

  Hello

  no luck, my friend with this Tuner. You know why? ISDB-t is only Tokyo (Tokyo Tower sending) and available Okinawa and the Brazil as the standard TV.

  So you will need to swap the tuner if possible, because the pilot European work on won´t for this device.

  Welcome them

• Qosmio G30-153 stops and restarts when you try to run programs and games

  I bought inscribed in the computer of 22 days ago. After 4 days of work without problem the laptop started to plant a blue screen, mainly with the "MEMORY_MANAGEMENT" error

  Very often when you try to play a 3D game or using any program (internet browser, file manager or almost). As the Blue error screen is essential to the system, the computer restarts by itself, but even more often an (specific to the program or to a standard error window

  Windows "(nous sommes désolés, mais le programme doit mettre fin à cause de l'erreur...-une erreur principalement dans certains fichiers.dll dans le répertoire Windows) appears disabled to continue the work on the program until you restart manually."

  I restored the system once already - it did not help, I also downloaded the latest drivers, including upgrading the Bios.

  What can be wrong, I have no idea. Help, please...

  Hello

  Can you please tell us what games you have preinstalled and programs? Description of your problem is quite general and it is not possible to have any concrete indication that may be the problem. For some time, I have G30 and operating system runs very stable with standard applications such as Microsoft Office, Skype, Icq, MSN messenger and IE7 with LAN and WLAN connection.

  Up to now, I really didn't notice any problem. Because of this, I really want to know what programs you're using.

• My Qosmio G30 going slower and slower

  My G30 seems to get slower and slower - can anyone recommend procedures or software that can release to the top/optimize or accelerate my lap top.

  Thank you very much. Ron

  Hello Ron

  Can you please tell me what you mean exactly as slower and slower? Returns to the slow start or laptop computer runs slowly while you perform a certain operation?

• Qosmio G30 - S-video and undetectable video anywhere

  Try different cords of different cameras, video and software of WMM for Virtual Dub - nothing.

  What controls the selection of the source? How can I test it?

  What do you do exactly?

• Qosmio G30 - 175 virus and the need to recover

  Unfortunately, my husband has downloaded a virus Smart Engine and now my laptop does not work.

  Sometimes I can get on the internet and Word for example, but sometimes takes several attempts.
  Slowly, has worsened over the last days even though I thought I had removed the virus.

  Cannot back up data because IE components cannot be read etc.
  I wonder if I use the recovery disk will I lose all my data, photographs and documents?

  Any help would be appreciated

  > I wonder if I use the recovery disk will I lose all my data, photographs and documents?
  Unfortunately, Yes. The recovery would be to format the whole HARD drive and would erase the partitions too.
  I recommend starting the Live CD WinPE and BartPE. (use google)

  These are Boot CD. This will start Notepad with Windows operating system environment that allows you to access the data on the HARD drive.
  Then, you can back up important data, and can then use the recovery disk to reinstall new OS.

• Qosmio G30-163 mouse and keyboard does not work properly

  Hi all

  I installed an update of the firmware of the toshiba site. I think that the upgrade was for the dvd but am not sure. I just saw an available upgrade and installed. Stupid of me. The dvd drive has been previously not recording. If after installing the update of the firmware I has not restarted the machine. In the meantime, I forgot the upgrade and then I did to fix the error of dvd

  "Start the Registry Editor (start, run and type regedit and click on).

  Search for "UpperFilters" and "LowerFilters" (and "UpperFilters.bak" "LowerFilters.bak", if they exist) value under the following key in the registry and delete it:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Exit the registry editor.

  Reset. »

  Now, after restart the keyboard and the mouse does not work. I can't go in safe mode because I can't press ok for the user login screen. I have attached an external keyboard, but it still does not work.

  I use windows xp, I have a lot of data. I can't do anything. If anyone has any idea please help me. The laptop is out of warranty. I'm stuck. Help, please.

  John

  S rally strange because I put t see a link between the firmware CD/DVD, UpperFilters and LowerFilters and the keyboard and mouse.

  This is first time that a removal of the upper and lower filters would undermine the functionality of keyboard and mouse. Which is really strange.

  Anyway, you are able to access the BIOS? If this isn't the case, then this is not good.

  First of all, you should try to save the data stored on the HARD disk in this case, I recommend to remove the laptop HARD drive and connect it using a USB HDD on another controller.
  This would allow you to save the data to another HARD disk.

  Put the removed HARD disk in Notepad, and then try to reinstall the OS from the Toshiba restore CD.
  I hope that this will be possible because I don't see another way to get the operating system again.

  Good luck by a friend

• Re: Qosmio G30 and green screen problem

  Dear friends

  I thing is interesting for any owner of Qosmio to look at this:

  http://www.asklaptopfreak.com/laptop-notebook-help/2007/07/08/Toshiba-Qosmio-G30-screen-problem/comment-page-4/#comment-130784

  http://www.asklaptopfreak.com/laptop-notebook-help/2007/07/08/Toshiba-Qosmio-G30-screen-problem/

  My Qosmio G30 is already dead, I got an estimate from the official service, to repair my qosmio costs nearly 600 pounds. Is a design flaw. Go on the internet.

  Interesting links! Thank you.
  I have to say then I must be lucky. My Qosmio G30 (German model) works well and without any problems

• Qosmio G30 freezes at startup of Norton Internet Security 2008

  Norton Internet Security 2008 will freeze my computer because soon, it attempts to load and the only way to do is to restart the system by pressing the on/off key.

  My laptop is a Toshiba Qosmio G30-177 (model No. PQG32E-02G022GR) with Vista Ultimate and pre-installed NIS2007. I have no problem with this NIS2008 version on my other laptop (Qosmio F10 - PQF10E-02300JGR, WinXP MCE).
  NIS2007 works well on my G30 and I have no problems at all, but more recent versions of NIS seem to be in conflict with my system:

  1. I am able to install and run the new version, download all updates and adjusting the settings. Maybe, a couple days later my computer freezes after start in exactly when the NIS tray icon appears. For a few seconds there is simply no response of the system at all and the LED of my laptop show that any HD activity has ceased. After having been inactive during those seconds, the cooling fan will start to operate at maximum power, creating a huge noise that I never experienced before, not even while the CPU was operating at 100% for a while due to other programs. Force a reboot, that's all I can do.

  2. now, this time, I rebooted my laptop successfully even once (took a few attempts) and it all of a sudden not freeze. Then I disabled the firewall and auto-protect at all times, so there was no freezing at startup and I just had to enable both the firewall and auto-protect after start manually. In order to avoid the gel again after the reboot, I always disabled NIS before shutdown. For one or two days of workaround has been quite successful.

  3. all of a sudden, after one or two days, this work around will become useless, because the system begins to freeze again at the time of the icon is displayed. In this case, restart has no effect at all, and NIS will continue to freeze at startup. I also tried to prevent form from NIS to ccApp.exe run automatically at startup (administrative tools > system configuration > "Startup" tab). It's successful and my laptop is able to start normally, but if later I try to start NIS manually, it will freeze again.

  I had this problem since NIS2008 just came out, so I thought that at the same time an update Windows or Norton may have solved the problem, but this weekend I gave another NIS2008 trying without success. I'm pretty sure that the problem is not caused by other software than Windows or Norton, because I also tried to install NIS after a full system recovery, so I've only preinstalled NIS2007 and Vista on my laptop. I use Norton removal tool and follow the instructions to uninstall before attempting to install the new version of course.
  My last hope was that the version of NIS2009beta somehow would not freeze my system, but it does. It does not matter if I try to start 2008 or version 2009beta, the problem is exactly the same.

  What really motivates me almost crazy is the fact that NIS works perfectly for a while, then needs enough small workaround, and then after some time completely refuses to work. In these two days I do not change system settings, install or uninstall programs or doing whatever it is that I felt might conflict with NIS...
  So far, I have no idea of the solution and have again use NIS2007.

  Someone knows how to fix this?

  Hello

  To be honest I don t use the Norton internet security because it slows down the performance of the laptop and he needs too many resources.
  I used the NIS06 and after several months of use I removed it from my system for the reasons mentioned above.

  I put really know what might be a problem with your Norton Internet Security but I guess its associated software question maybe there are a few compatibility issues with vista and NIS08. Who knows...

  In my opinion, you should first check the Symantec Web site for more details.
  Maybe these questions are mentioned somewhere in the FAQ section and maybe some updates or patches are available.

  Good bye

• Qosmio G30 - 190 can't start

  I have the Qosmio G30 - 190 model No computer. PQG30E-039023FR

  There is often a blue if poster tell me there's an erros on the system
  I tried to restore from the TOSHIBA restore CD. but after you create the software image and eject the recovery CD, the Qosmio stop automatically. And when I restart that tell me Windows errors, the software is not installed try to install it again.
  I have change the memory to see if it is the problem, but something happened

  Let me know if you can help me to solve these problems, thank you in advance for your help.

  Ayaovi

  What do you mean "stop automatically"? The machine has been shut off instantly? Alternatively, windows closed down by itself?

  If it turns off instantly, then it might be the accumulation of dust in the heat sink causing it to overheat.

  You should test the RAM before reinstalling Windows. You can download the bootable Memtest on www.memtest.org CD ISO

• Qosmio G30-117 - no HDMI plug - so, how can I connect to my new TV HDMI

  Hello
  I've had this laptop for about a year and for a large part of which I had no idea what was HDMI. Then my old TV died and I had to get a new one. In order to have my Qosmio I assumed (stupidly) - after all, it is a (relatively) new piece of equipment and has the HDDVD. I bought the new TV, got the cables and low and this is where should be the connection HDMI was nothing.

  There is another connection that I thought was HDMI but isn't. I am able to connect to the TV using my d-connection cable SCART. But of course how a true HD signal. I can't seem to find out and a call to the support of Tosh line me anywhere we know?

  Y at - he had a special adapter/cable which can connect in this regard ' HDMI? If this is not the case, how can I can a HDMI Signal on my TV from the phone.

  Any help or ideas appreciated

  Thank you
  Peter

  Hello

  The Qosmio G30-117 model was not delivered with the HD-DVD drive, but only with the player double layer DVD Super-Multi drive (+ R) and so this laptop does not support HDMI port but only digital device on the port (d-connector).
  The other G30 with HD-DVD has been bundled with HDMI port.

  A component-D to HDMI adapter is unknown to me. But why you want to connect the HDMI laptop if the laptop does not support HD-DVD player?