Models for EPUB CSS stylesheet?

Similar Questions

• Re: CSS external style; I finished a Web site for the class (html 5 and I forgot to select the external CSS stylesheet; do I have to redo the project in Dreamweaver CS6)

  Hello

  Re: External CSS to model; I finished a Web site for the class (html 5 and I forgot to select the external CSS stylesheet; do I have to redo the project in Dreamweaver CS6)

  In 2015, CC, you can do the following...

  1. turn highlight everything between your

• Insert a div for a single document case back only when using external CSS stylesheet.

  I'm trying to set a background image in one of my div boxes, but because I am using an external stylesheet it changes it in all my documents. How can you do with just this one page? Preferably in design mode.

  What I was doing to slove this problem was:

  • Open my external CSS stylesheet
  • Copy the contents of this
  • Remove the CSS link in a page, that I wanted to be different.
  • Paste the content in thein the rest of the page CSS rules.

  Then I could put a background in this box without affecting other pages...

  I tried the other suggestions, but could not get to work. Don't say that they are wrong, but maybe I was wrong implementation does not.

• Unexpected error when linking of CSS stylesheet

  I worked on this site for over a month now. I have a linked external CSS stylesheet and everything works seamlessly between Dreamweaver and the web. Today I tried to create a model and then didn't like, so I removed it. After that, my CSS rules were not correctly displayed EVEN IF my formatting and everything remained the same.
  
  I have a feeling there is that something put cached behind the scenes that is to play it. Community help is greatly appreciated. This is not the first time that I couldn't link a CSS stylesheet.

  I came to the answer myself by a lot of inference in reading help files for myriad.

  THE ANSWER: What happened was that the link between my style sheet and 'site' I was working with had become "broken" for some unknown reason to me. (Most likely cause by removing me things outside of Dreamweaver). I ran the Broken Link checker and reassigned the link to my style sheet CSS using the 'Browse' function so that the internal system of Dreamweaver can reconfigure itself directly look for the style sheet. It turns out that the difference is between css/styles.css (BAD) and the (GOOD)... css/styles.css.

  I was unable to add the '.. ', but anywhere in the fixer of broken link.

• Why can't I create a new epub file in a model of epub on ibooks author?

  I try to import an epub I created on another platform in iBooks author in order to edit it there and re-export as an epub. When you choose file > new epub file and I choose a model, epub models are not available. No idea why? No work around? I don't see why I can't create an epub from an any epub.

  I don't think that iBA has the functionality you need.  You start with a model of epub and add things to it.

  You must use another application to edit your original epub.  Apple won't do anything for this AFAIK.

• The CSS stylesheet using custom

  I try to use a custom CSS stylesheet and cannot operate. I created my style sheet and downloaded to only show under the shared components > > Cascading Style Sheets.
  
  Displaying the source code for my pages currently indicates a reference to what I think is the default style sheet.

  <link rel="stylesheet" href="/i/css/apex_3_1.css" type="text/css" />

  But no reference to the one I uploaded. So I guess I need to add a new reference pointing to my sheet.
  
  So questions-
  -How and where can I add this reference?
  -Is the right way to do things if I want to use my own styles?

  West Indies,

  Go to your shared components > Temples > select the page template, you want to ask your CSS and in the "Header" area, you will see references to the CSS of the APEX, something like:

  Now, just add your CSS reference after reference CSS of the APEX.

  I hope this helps.

  -Chris

• How to make a model for a quarter fold card

  How to make a model for a quarter fold card - horizontal and vertical format

  HI Mickey,

  Check the file > new file selector model to see if your version of Pages offers card models. This began as a two "single fold" card on US letter in landscape orientation.

  The model included three pages. Page 1 Page 2 inside, outside, and the third was a blank page. Only Page 1 was included in the original document.

  I started by the insertion of a page inside, containing two of the big text box below.

  Back to Page 1, I chose an image returned vertically then horizontally, then repeated this procedure with the text box that contains "Thank You".

  I traced the two objects, then moved inside page, placing the pair in the upper left corner.

  Inside page, I removed the text in the box on the left and replaced by "left inside,"a label to mark the position of this section in the final map. "

  I added a text box, entered 'Back' returned vertically then horizontally and dragged to the position shown.

  

  Save the result as a model.

  Using the same document, I went to file > layout and changed the landscape to Portrait orientation.

  Do drag the blue guides to the indicated positions, then reshape the elements to fit the new space.

  

  Save the result as a model (with a different name of the above registered version).

  Kind regards

  Barry

  PS: Executed using Pages ' 09.

• Is the designation of the precise A1286 model for a 2012 Macbook Pro 15.4 mid "computer?

  Is the designation of the precise A1286 model for a 2012 Macbook Pro 15.4 mid "computer?

  OVERVIEW
  Introduced	June 2012
  Discontinued	October 2013
  Model identifier	MacBookPro9, 1
  Model number	A1286

  Edit: in fact this model number is used for some units, from a late model ' 08.

• New user pages :) I seletced arrow shape, he does exactly that for my needs, can I now register as a form of model for easy future use please? Thank you!

  New user pages I seletced arrow shape, he made exactly that for my needs, can I now save it as a form of model for easy future use please? Thank you!

  Hi PAYGPI,

  A Pages document with some arrows. With a selected arrow Panel Format (right) organize tab > stay on the Page. You can then move around the page.

  

  Menu > file > save as template.

  In the model picker, rename it. I used the name clip art arrows. It appears in the template selector > my templates.

  

  To rename or delete a custom template (in my models) right click or control click on this model:

  

  Please call with questions.

  Kind regards

  Ian.

• Rechargeable battery NP-FH40 model for model Handycam Sony DCR-SR42E

  Because I'm not able to find rechargeable battery NP-FH40 model for the Handycam Sony DCR-SR42E model in one of your stores in Delhi, what is the replacement battery model. Help, please.

  Hello. The H-series batteries have been replaced by the series V so look for a NP-FVxx. The voltage may be slightly different from the original battery, but this isn't a problem. The physical difference only is the size of the center of each side of the battery tab then you might want to try before buying just to make sure it fits. I replaced my series H with V series without any problem.

• Import the SPICE model for transistor BJT BFP720F in Multisim

  Hello

  I'm trying to get the SPICE model for the BFP720F transistor provided by Infineon to work in Multisim.

  I have attached the template as provided by the manufacturer.

  If I import it as-is, I get error messages "invalid node identifier '<4>'" (I have translated that German, it might not be exactly this message in the English version).

  So I tried to replace all the "<4>" with "4", which seems to help, but now the error is "adjusted temperature setting"VJC (PC)"negative" and "incorrect use of the parameters of the model. Now I don't really know what to do with it.

  Is the template provided in the wrong format? I somehow can it in the right so I am able to use it?

  Because I need for my project semester in College, any help would be much appreciated.

  Thanks in advance!

  Hi NikoNR,

  When writing a detailed description of what I did exactly with the Wizard component, the component again to create in Multisim from scratch, I found that there are different SPICE models provided in the package for use with AWR MWO. They have a different file extension, but are normal text SPICE inside files.

  It turns out that they actually work with Multisim. The difference is small, there is only one temperature (TNOM) setting that is absent in these models, distinct from the "general" I first tried to use. It seems that Multisim had a problem with this setting, leading to the error I encountered.

  Anyway, the problem is solved now. Thanks for your help

  Good day

  (The now much happier) EE-student

  ----

  Edit: I have attached the SPICE model, that I ended up using, in case someone at - he never met a similar problem. The only change I did this, is to replace '<4>' with '4' in the part of the diode (single occurrence here). I had to zip to download with his original extention (.mdl).

• Is there a model for MCU PIC12F675?

  I am currently working on a design that integrates the MCU PIC12F675 of Microchip. I want to be able to simulate this circuit in Multisim, however, there is no included model for her. Is it possible to get this simulation model?

  Hello

  In Multisim allows only to simulate 8051/8052 and PIC16F84/PIC16F84A. There is no way to add new models of microcontrollers to the database.

  Kind regards

• I installed a new card grafics since then the mask of model for a driver to display driver rotation.

  Original title: my computer ask for a display driver and I don't know.

  I installed a new card grafics since then the mask of model for a driver to driver display rotation

  Hi gerdablignaut,

  1. What is the brand and model of your computer?

  2 have you made any hardware changes or software on the computer before this problem?

  3. What is the full error message that you receive?

  4. when exactly you receive the error message?

  You can check for any updated driver available via Windows updates and check if this solves the problem.

  
  Reference: How to manage devices in Windows XP

  Hope the helps of information.
  Please post back and we do know.

• Sony Vegas Pro 11 shows only audio models for rendering

  Hey there.

  I have Sony Vegas Pro 11 running under Windows 7 64-bit.
  I do a lot of projects such as movies at home...
  I just finished a family film with several audio & video clips with transparent title text clips, and I wanted to make. But when I click "Render As", only make model for audio is shown in the choice of ".flac", ".ac3", ".aif", ".mp3", ".ogg", ".pca", ".wav" and "w64 '... The render window does not render models show video (my usual rendering template is ".wmv"...

  This isn't my first project and it is a reissue of a movie (with fees of non-edited clips) that I already made using sony vegas pro.

  The project settings for the movie is:

  Cinema widescreen (my custom template) - 1920 x 786'

  Cadence - 24,000 IPS

  Stereoscopic 3D mode - off

  Order - top field first field

  Format of the pixels - Square 1.0000

  Rotation of output - 0% "original".

  Pixel - 8-Bit format

  Compositing Gamma - 2,222 video (by default and no selection)

  Full resolution rendered quality - best

  Type - Gaussian blur of movement

  Deintelace methods - fields of mixture
  Can someone tell me what could be wrong with my project?

  Hey I know it's super old, but maybe my suggestions will help someone anyway. What I found is that when you try to export an audio clip or give priority to an audio clip that Sony Vegas will automatically that the whole project is for sound only; even if you add your video clips and effects later. This makes it super annoying when you try to make your video project and you can only see the audio rendering options. After clicking on 'display as', you may find that the options that you have are all audio models. For a change, who simply click on the small blue link under the 'Browse...' button that says 'more Filter Options'. You should see a bunch of options appear under the output Format:

  Check the box "only of video models" and voila! Your video options are back! Worked for me hope I could help you because it really frustrated me after working on my project all day LOL.

• License model for BB10 apps in AppWorld

  On the BB dev site, I found the following:

  Applications running on the BlackBerry 10 operating system is the use of a static licensing model, regardless of the choice made in the licensing model in the supplier portal.

  This means that we don't need to bother about the licensing model for BB10 apps and let the App World which must manage the licesning Blackberry world mechanism?

  Fix. In BB 10 it is not possible for a user to save the app package and copy it to another device. Therefore, there is no chance of your app executable escaped a user and then on any other side loading on their device. It is protected in this way and the dynamics of license is not really necessary...

  But if you want extra protection, you can always do it within your application, but you have to manage your own licensing model in this case.

  Shadid