Module"C:\ProgramData\EbutwExegu.dat" failed to load the
"I won"module"C:\ProgramData\EbutwExegu.dat" failed to load "whenever I have to start, the system works normally after dimissing message
I also can't uninstall Security Essentials completely - I was wondering if the two were connected
Hello
Google has no information on this 'EbutwExegu.dat' file, so it can be a left over Malware boot entry that was removed from your security programs.
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:
http://www.Malwarebytes.org/products/malwarebytes_free
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
If the problem persists after scanning, take these startup entries:
"How to use MSCONFIG in Windows Vista"
http://www.netsquirrel.com/Msconfig/msconfig_vista.html
You can also use this free program to do, too:
"Autoruns for Windows V11.32"
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
__________________________________________________
"How to manually uninstall Microsoft Security Essentials 1.0.1963 if you cannot uninstall it using Add / Remove programs.
http://support.Microsoft.com/kb/2435760/en-us
See you soon.
Tags: Windows
Similar Questions
-
Half-life 2 says failed to load the Launcher DLL specified module could not be found
Failed to load the Launcher DLL:
the specified module could not be foundHi Madoo17,
Welcome to the community of Microsoft and thanks for posting the question. I've surely you will help find a solution on the issue.
1. Once you get this error message?
2. it worked before?
3 did you changes to the computer before the show?
Perform the steps:
Method 1:
Put the computer in a State of boot is a way to know which application is causing this problem.
To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
Step 1:
Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
Follow the steps in the link below to do the same thing:
How to configure Windows XP to start in a "clean boot" State
Note: After troubleshooting, be sure to set the computer to start as usual as shown here:
Step 2: To configure Windows to use a Normal startup state
After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
a. Click Start and then click Run.
b. type msconfig and click OK. The System Configuration Utility dialog box appears.
c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.
d. When you are prompted, click on restart to restart the computer.
Method 2: Use the (SFC) System File Checker tool.
SFC system gives an administrator the ability to scan the files all protected to check their versions. If the System File Checker detects that a protected file has been replaced, it retrieves the correct version of the file in the folder cache (% Systemroot%\System32\Dllcache) or the Windows installation source files and then replaces the incorrect file. System File Checker verifies and repopulates the cache folder also. You must be logged in as an administrator or as a member of the Administrators group to run the System File Checker.
Check out this link to do the same thing:
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
Hope this information helps. Please reply back with the State so that we can help you.
-
Hello
I will apply patch bundle and my oracle database 11.2.0.2 and Microsoft Windows x 86 platform. As read the file Readme Oracle recommends to use OPatch utility version 11.2.0.1.3 or later. To check the inventory availability I use the command lsinventory % ORACLE_HOME%/OPatch/opatch.
It ended to give details below.
Citing O 11.2 patch .0.1.1
OPatch could not create/open history for writing file: * my home oracle path***\cfgtoollogs\opatch\opatch_history.txt
**ORACLE_HOME***\cfgtoollogs\opatch\opatch_history.txt (access is denied)
Setup Oracle interim Patch version 11.2.0.1.1
Copyright (c) 2009, Oracle Corporation. All rights reserved.
OPatch could open the log file, the recording is not possible
Home Oracle: *.
Inventory Center: C:\Program Files\Oracle\Inventory
from: n/a
OPatch version: 11.2.0.1.1
YES version: 11.2.0.2.0
YES location: * ORACLE_HOME * \oui
Location of the log file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch2015-04-09_16-27-49PM.log
History of patch file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch_history.txt
Failure of the load of the inventory... OPatch failed to load the inventory for the given Oracle Home.
LsInventorySession failed: LsInventory failed to create the log directory * ORACLE_HOME * \cfgtoollogs\opatch\lsinv\lsinventory2015-04 -.
09_16-27 - 49 PM .txt
OPatch failed with error code = 73
Can someone please help me solve this problem?
Do I need to install the last opatch utility?
Hello
This error message " LsInventorySession failed: LsInventory failed to create the log directory * ORACLE_HOME * \cfgtoollogs\opatch\lsinv\lsinventory2015-04 - .
09_16-27 - 49 PM .txt "
indicates that you have a permission problem with your file systems: cfgtoollogs/ORACLE_HOME/opatch
Check the owner of this file system.
Kind regards
-
Failed to load the user profile on my laptop. Help
I can't connect my laptop as his watch the above message, it is 2 years and a half old and isa an inspiron 1525, helps, I know I need to re boot, but as I am not too good with the system and was looking to find out where to download a disc and make sure that I get the right one can someone help me. in my library now wiyh a ubs if I need.
Next time please post the error message in its entirety... verbatim.
What is the real error message?...
Failed to load the user profile and the user profile service does not log
If Yes, read on...
You haveanother admin account , you can connect?
If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.If you don't have another admin account, go into safe mode.
Here's how to get safe mode:
Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Safe Mode with network.In the window of logon in safe mode...
1 can connect to your account administrator in safe mode?
If so, do a restore system first, if no help, run theMicrosoft tutorial support listed below.2. If you can't log into your own account, you see another admin next to your account in the logon screen?
If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and newdo a first system restore, if not help, run the Microsoft tutorial support listed below.If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
How to restore the system:
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlTutorial from Microsoft support :
http://support.Microsoft.com/kb/947215
There are several methods, go through one by one.
Method 3 has a "fix it for me" applicationFor the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
did a normal turn on the computer. Message came back failed to load the local profile. IO error. When he signed me, all my documents in My Documents had disappeared.
A corrupt profile is fairly easy to recover with minimal losses. Refer to the following procedure:
"How to recover damaged Windows XP user profile"
<>http://support.Microsoft.com/kb/555473 >Corrupt profiles are almost always accompanied by hard drive corruption. After recovery, scan your hard disk for errors using chkdsk with the /f or/r option
"How to perform disk error in Windows XP check"
<>http://support.Microsoft.com/kb/315265 >The disk check procedure can take hours depending on the size of your hard drive and the amount of corruption and cannot be interrupted, then run it when you won't need your computer for awhile.
HTH,
JW -
start the computer to start but stops at "failed to load the core file?
Original title: how to get Windows XP to boot my computer from starting when starts but stops at "failed to load the core file?
When I try to start my computer, it stops at "cannot load the kernel." It will go no further. What is the solution?
Please see: How to perform a Windows XP repair install
-
the user profile Service service has no logon failed to load the user profile
I received the following message when I try and log in my account to have:
The user profile Service service has no logon failed to load the user profile
What are my options?
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
"Whenever I tried to sign up with my password to connect, do the following: the user profile service service failed connection, failed to load the user profile" when I click OK, it disconnects... Help, please
Go to Safe Mode and do a system restore. See the link below:
The user profile Service has not logon. User profile cannot be loaded
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/the-user-profile-service-failed-the-logon-user/995955f8-d9d4-4148-840D-c896c3be78b8Follow the links on the post.
-
Error message: "the service user profile service has no logon failed to load the user profile.
Unable to connect.
· Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~If the above does not work:
See if the information in the above tutorial will help you.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947215#letmefixit
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947242
A temporary profile is loaded after you connect to a Windows Vista-based system
See you soon.
Mick Murphy - Microsoft partner
-
I got the error "the service user profile Service has no connection, failed to load the user profile" when you try to use my desktip. It is on the login page. My account icon loads and the guest account. I have enter my password as an administrator and get the error message listed above. I followed all the solutions I could find and it is not corrected.
I have a slight hitch, after several failed here, I checked the domestic Group on my laptop and I have high listed as connected to the Group Home Office; with all the files. How can I fix the desk top to coinside with his status of being online. Yet once, my counter top will not recognize the password, but the desk top shows online in the home group.
Home Group is Windows 7.
Here is the Vista Forums.
What operating system do you use?
Vista info below:
· Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~If the above does not work:
See if the information in the above tutorial will help you.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947242
A temporary profile is loaded after you connect to a Windows Vista-based system
See you soon.
Mick Murphy - Microsoft partner
-
WUDFRd failed to load of the device
Hello
I did a clean install of Windows 7 64 bit and everything goes fine until I started to add the specific drivers of lenovo t61p. I get the following in the Event Viewer error message:
The \Driver\WUDFRd failed to load the device driver USB\VID_0483 & PID_2016\5 & 295bd535 & 0 & 2.
After a lot of Googling, I found that the usb device is a fingerprint reader. remove the fingerprint reader drivers removes the error in Event Viewer.
AuthenTec TouchChip fingerprint coprocessor uses the v1.5.0.289 driver. their website States that the error is a problem with Microsoft. See this link:
http://support.AuthenTec.com/Knowledgebase/KBview/tabid/843/ArticleID/443/WUDFRd-failed-to-load-for-the-Device.aspx, or search their Knowledge Base for "WUDFRd failed to load for the device.
I see that the other members of the forum answers have similar problems, but they still have to find a solution. is that someone in Microsoft could provide an update for a fix?
Yes! After two years, I found a solution. I installed a previous version of Lenovo sw fp and it fixes attention on win 7 sp1 2 t60. I've been running for about 3 weeks and warning went on two PCs. then, download and install IN1FGP08WW1.exe. It is fp s-o of Lenovo in UTEK and there the pilot to clear the warning. BUT it's not as safe as the current Lenovo sw fp. Apparently, she was abandoned when authentic bought UTEK because of this. as I understand it, if someone has physical access to your pc they can decifer pw of windows in the registry. This isn't a big problem for me.
-
Hi all
I create connection in Jdeveloper to the repository of content both are 11.1.1.6.0 version. I'm creating RIDC Socket type Socket.
everything by testing the connection I get under Error.UCM runs in other ways machine come IP. trying to connect from my local Jdeveloper.
Test failed:
Failed to load the metadata server using GET_DOC_METADATA_INFO content model.
Permission denied. Address ' XX. XX. XX. XX'(IP) is not an authorized remote socket address. (IP replaced by XX...)
Why his error.do showing that I need to put any changes of the UCM let me know problem question
Please give me an idea about this error and the solution for the same.
Concerning
Siva seryTo eliminate the first manifesto, see this post: fail to connect to the content if server use 'web' for the RIDC socket type and check that the other IP is allowed, amongst, IPs (you can use a mask, or type it directly) - do not forget to restart the server after the change.
If this does not help, test, if other services such as DOC_INFO_BY_NAME can be called via RIDC, or if they have the same problem.
-
Essbase Error Error: 1002097 failed to load the database
Hello
I use essbase 7.1. I'm having a problem when I try to run any calc start application or database or do anything Essbase gives me an error: 1002097 failed to load the database. I restart the services, essbase, but nothing happens. Any help would be great.
Thank youBrowse the backup and restoration guide that is located at http://download.oracle.com/docs/cd/E10530_01/doc/nav/portal_1.htm. While he is a guide of the system 9, recovery has not changed between 7 and 9. I guess it all depends on what type of backup you did.
-
Failed to load the script fails with class "HostSriovInfo" error
Hi all
We have just improved of RHEL5 to RHEL6 and tried to load the SDK v6. * SOME * our standard perl scripts that collect data of the inventory of the vCenter servers assorted fail with the following error:
Unable to load the 'HostSriovInfo' class on line 52 of usr/local/share/perl5/VMware/VIMRuntime.pm.
However, we are able to run a connect.pl of vCenters successfully all with the same credentials. Here from the ideas that could help us solve?
Thank you
-Mike Gray
Unfortunately, the modules are not versioned, each version uses the same name "VIM25Stub.pm" in this case. The likely problem here is an older (from VIM25Stub.pm<5.5, since="" 5.5="" introduced="" that="" object="">5.5,>
Can check to see how many files VIM25Stub.pm is on the system, and if they are the same (simple md5sum would work).
My 6.0 vsphere SDK VIPerl install system:
$ sudo find /-name VIM25Stub.pm - type f-exec (md5). 2 >/dev/null
MD5 (/ System/Library/Perl/5.18/VMware/VIM25Stub.pm) = 6740555623a9613b4f9a50b29b457eaf
You can just check if the name of the package is in the file (make sure you get one that Perl is picking up it is @INC).
$ egrep - r "HostSriovInfo". / *
./VIM25Stub.pm:package HostSriovInfo;
./VIM25Stub.pm:VIMRuntime::make_get_set ('HostSriovInfo', 'sriovEnabled', 'sriovCapable', 'sriovActive', 'numVirtualFunctionRequested', 'numVirtualFunction', 'maxVirtualFunctionSupported');
-
Failed to load the JDBC driver when you run the update of the base
I use dev studio to extract data in the pipeline to an Oracle database using an adapter record, on version 3.1.1 short. I get errors when running the update of the base:
ERROR 22/03/13 17:13:37.273 UTC (1363972417273) {config} forge: (AdapterRunner): unable to load the JDBC driver: oracle.jdbc.OracleDriver. com.endeca.edf.adapter.plugins.JdbcAdapterException: cannot load JDBC driver: oracle.jdbc.OracleDriver. at com.endeca.edf.adapter.plugins.JdbcAdapter.loadDriver(JdbcAdapter.java:256) at com.endeca.edf.adapter.plugins.JdbcAdapter.execute(JdbcAdapter.java:91) at com.endeca.edf.adapter.AdapterRunner.run(AdapterRunner.java:168) at com.endeca.edf.adapter.AdapterRunner.main(AdapterRunner.java:43) caused by: java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver to java.net.URLClassLoader$ 1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged (Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:303) at Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:301) at java.lang.ClassLoader.loadClass(ClassLoader.java:248) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:316) at java.lang.Class.forName0 (Native Method) at java.lang.Class.forName(Class.java:169) to com.endeca.edf.adapter.plugins.JdbcAdapter.loadDriver(JdbcAdapter.java:252)... 3 more
ERROR 22/03/13 17:13:38.291 UTC (1363972418291) FORGE {config}: the java process evaluating the manipulative java class 'com.endeca.edf.adapter.plugins.JdbcAdapter' failed. Check the file ' / u01/oracle/VIS/apps/apps_st/comn/Oracle/endeca/Discover/./logs/forges/Forge/Edf.Pipeline.RecordPipeline.JavaManipulator.LoadOracleItems.log ' for more information.
ERROR 22/03/13 17:13:44.840 UTC (1363972424840) {baseline} FORGE: Forge failed with 2 errors and 0 warnings.
Pass on the adapter check crossings are defined as follows:
DB_DRIVER_CLASS = oracle.jdbc.OracleDriver
DB_URL = JDBC: thin: username / [email protected]:1521:VIS
SQL = select * from XXFCI_ENDECA_ITEM_DATA
I've set up the classpath as a variable that is defined in environment.properties as follows:
forge.javaClasspath = ${ENDECA_PROJECT_DIR}/config/lib/java/ojdbc6.jar;${ENDECA_PROJECT_DIR}/config/lib/java/AdvJDBCColumnHandler.jar;${ENDECA_PROJECT_DIR}/config/lib/java/javaManipCommon-1.1.jar;${ENDECA_PROJECT_DIR}/config/lib/java/jakarta-oro-2.0.8.jar;D:/Endeca/CAS/3.1.1/lib/recordstore-forge-adapter/recordstore-forge-adapter-3.1.1.jar
I'm passing forge.javaClasspath as an argument through the DataIngest.xml variable. The arguments that I am passing in DataIngest.xml are as follows:
< args >
< arg > - vw < / arg >
< arg - > pruneAutoGen < / arg >
< arg - > javaClasspath < / arg >
< arg >$ {forge.javaClasspath} < / arg >
< / args >
I wonder if the versions of javaManipCommon - 1.1.jar and jakarta-oro - 2.0.8.jar are correct for version 3.1.1 of short. How will I know? What else can I do to fix this?
Any help you can give would be appreciated!
Thank you
Becky Bradberry
Senior Oracle consultant
Promote the ConceptsYou run this under Linux or Windows? The path of the log file looks like Linux, but your classpath is configured to use windows (semicolons instead of colon) separators.
Concerning
Michael
Maybe you are looking for
-
How to display two windows of the tab at the time of salme
I want to get some data from a web site in another web site, and that's why I want to reduce to a minimum the two windows so that they are displayed at the same time
-
Satellite A100: Recovery DVDs would not work
I'm trying to recover from the State factory, and when I boot on the dvd, it give me and error.is there anyway I could get this to work?
-
I transferred the names and addess to Yahoo, how to make and send
I'm stuck after transfer names and addresses. How should I continue so I'm able to use Yahoo mail?
-
card n wireless Broadcom 4322 part no 582564-002
I have a pavilion dv7 4045ea windows 7 64 bit and you want to upgrade the card with the n broadcom wireless card wireless 4322. In the maintenance and care guide it lists the map above for the region of the United Kingdom, but does not so I t is a ca
-
new pavilion 27bw monitor VGA only with Dell vostro1720 at startup, displays 27bw, but Windows is marketing, laptop computer mojnitor displays and 27BW does not work, goes into standby mode. OSD menu does not display the options any suggestions?