Module development LightroomCC will not come to the top
LightroomCC load OK in the library module. However, when I click on an image and go to the module to develop the software stops working. I'm doing something wrong?
I also noticed that if I send a picture to Photoshop, it works. Also, if I send a picture to the Lightroom Slideshow, then click on develop it will go to the develop module, but only from slide show.
Wow, just got an email from Tanuj at Adobe. The solution is to go to the preferences, then Performance and uncheck the box ' processor graphics use.» And it worked. Thank you, Tanuj!
Peter
Tags: Adobe
Similar Questions
-
Internet Explorer will not come to the top. My router says I 54mpbs Exellent, but I can't go on the internet. Diagnose the problem button appears. When I run it, it says that my router is not working. I have wifi and my friend has the router and its connection is good. I also have a propellant that works great too.
Can you get far enough in IE to access the Tools Menu? If so try clicking Tools | Internet Options | Advanced and clicking the reset button.
-B-
http://www.officeforlawyers.com | http://www.OneNote-tips.com
Author: Guide to counsel for Microsoft Outlook -
I updated adobe and now windows vista will not come to the top!
I was doing something that requires adobe 9 or higher, so I updated to 10. Now my main screen will not come to the top. I can't do all the suggestions for troubleshooting because I can't get to my computer at all. I validated and it says windows Pascal more send activationsetc. and I can't update because I can't.
Try to start in safe mode (press F8 immediately and repeatedly after Power Up Self Test and before Windows starts) and uninstall Adobe Reader X. Then try to restart normally.
-
Interface 1130ag WLAN AP will not come to the top?
Hi all
For the first time, I installed a 1130ag and I can't bring up the interface without wire/radio?
I have connected it via http at the moment and have tried to activate the radio via the GUI, but it does not come to the top? (This is normally upward in this way with the year 1200)
Can anyone suggest anything?
Thank you very much
Nathan.
UK.
Have you defined a SSID? If you have not the radio will not come to the top.
-
Security Windows will not come to the top
lost all my programs, firewall windows, I click on the setting change a white csreen rises then real quick stop... click on Security Center, c:\windows]system32\run1132.exe comes upand said parameter is in good... lost my windows live sign on... my norton will not come up... i think I may have been hack in to
lost all my programs, firewall windows, I click on the setting change a white csreen rises then real quick stop... click on Security Center, c:\windows]system32\run1132.exe comes upand said parameter is in good... lost my windows live sign on... my norton will not come up... i think I may have been hack in to
It seems that your system has been infected:
Preform Malwarebyte s scanning:
http://www.Malwarebytes.org/ recommended
then the use of scan of preform
a-squared Emergency USB Stick files http://www.emsisoft.com/en/software/download/
After that, make sure that your system is free of viruses:
http://www.Avira.com/en/download/index.php
If you can not install anti virus Software, then try to scan online
http://housecall.trendmicro.com/UK/
and spyware:
http://www.systweak.com/AntiSpyware/
http://www.SurfRight.nl/en/downloads/ recommended
-
Old laptop will not come to the top. To get the files and documents for the new laptop
My laptop with Windows Vista will come is no longer. It is just sitting there waiting and waiting. I just got a new laptop with Windows 7. I can't all files and documents, etc. from the old laptop and put it on my new laptop? Can I do this using a USB Flash drive? Thank you
Saturday, January 22, 2011 18:39:30 + 0000, ashevilletom wrote:
My laptop with Windows Vista will come is no longer. It is just sitting there waiting and waiting. I just got a new laptop with Windows 7. I can't all files and documents, etc. from the old laptop and put it on my new laptop?
I do not know. The answer depends on what's wrong with the old.
Can I do this using a USB Flash drive?
# If you can not start the old laptop, you cannot transfer files from it
to the USB.If the problem with the old laptop isn't that hard drive has
has failed (and that's a big 'if'), you can pull the hard drive.
and get an external USB enclosure. Having done this, you can read
It is on the new laptop and copy files from it.Ken Blake (MS-MVP)
-
Static L2L Tunnel - will not come to the top
Hi all
Currently have a very big problem with a site that I can't go there for the moment.
We have one HUB ASA5505 SEC + a few other ASA connected via VPN L2L. We have static L2L 1 active, 1 dynamic L2L Active, and I am currently trying to add a second static Tunnel L2L.
I checked that each WAN Interface can ping each other, and both devices have full internet connectivity. There is no double nat or being content filtering. I noticed that my Client remote access VPN Cisco will not properly connect through the ASA despite full internet connectivity, but when I connect directly to a modem, I was able to connect properly. So apparently the ISP isn't blocking IPSEC traffic as far as I KNOW.
Static2 uses currently a temporary license of TAC since our license is currently waiting for arrival, but a release of version see the watch all VPN/3des features are enabled.
Here are the configs:
ASA5505-HUB hostname
domain xxxxxxx.local
activate the password xxxxxxxxxxx
names of
name 192.168.9.50 xxxxxxxxx
name 192.168.9.51 xxxxxxxxx xxxxxxxxxx description
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.9.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address xxxxxxxxxxxxx 255.255.255.248
!
interface Vlan3
nameif dmz
security-level 50
IP 10.10.9.1 255.255.255.0
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
switchport access vlan 3
!
interface Ethernet0/5
switchport access vlan 3
!
interface Ethernet0/6
!
interface Ethernet0/7
!
passwd xxxxxxxxxxxx
passive FTP mode
clock timezone CST - 6
clock to summer time recurring CDT
DNS lookup field inside
DNS server-group DefaultDNS
Server name xxxxxxxxxx
Server name xxxxxxxxxxxxxxx
domain xxxxxxxxxxxx.local
permit same-security-traffic intra-interface
permit inside_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 192.168.0.0 255.255.0.0
access-list 101 extended allow icmp a whole
access-list standard split allow 192.168.0.0 255.255.0.0
permit to_static1 to access extended list ip 192.168.0.0 255.255.0.0 192.168.14.0 255.255.255.0
permit to_static2 to access extended list ip 192.168.0.0 255.255.0.0 192.168.16.0 255.255.255.0< this="" is="" the="" problem="">
RTP list extended access udp any permitted any 10000 20000 Beach
RTP list extended access permitted tcp everything any 10000 20000 Beach
pager lines 24
monitor debug logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
MTU 1500 dmz
mask IP local RA-pool 192.168.99.1 - 192.168.99.126 255.255.255.128
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 75.146.188.94 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout, uauth 0:05:00 absolute
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.0.0 255.255.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
set of 20 SYSTEM_DEFAULT_CRYPTO_MAP crypto dynamic-map transform-set ESP-3DES-SHA
card crypto outside_map 10 correspondence address to_static1
card crypto outside_map 10 peers set xxxxxxxxxx
outside_map crypto 10 card value transform-set ESP-3DES-SHA
card crypto outside_map 11 match address to_static2
card crypto outside_map 11 counterpart set xxxxxxxxxxxxx< problem="">
card crypto outside_map 11 game of transformation-ESP-3DES-SHA
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet 192.168.0.0 255.255.0.0 inside
Telnet timeout 5
SSH timeout 5
Console timeout 0
management-access inside
dhcpd outside auto_config
!
dhcpd address 192.168.9.101 - 192.168.9.199 inside
dhcpd dns 192.168.9.2 xxxxxxxxxxx interface inside
dhcpd xxxxxxxxx.local area inside interface
xxxxxxxx dhcpd option 66 ip inside interface
dhcpd allow inside
!a basic threat threat detection
Statistics-list of access threat detection
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
type of policy-card inspect sip default_sip
parameters
Journal of decline in the shares of Max-forwards-validation
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the netbios
inspect the rtsp
inspect the default_sip sip
!
global service-policy global_policy
Group xxxxx-RA internal policy
xxxxx-RA group policy attributes
Server DNS value 192.168.9.2 xxxxxxxxxxxxx
Protocol-tunnel-VPN IPSec l2tp ipsec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split
xxxxxxxxx.local value by default-field
allow to NEM
IPSec-attributes tunnel-group DefaultL2LGroup
pre-shared-key *.
type tunnel-group xxxxx-RA remote access
Tunnel-Group global xxxxxx-RA-attributes
address-RA-pool
Group Policy - by default-xxxxx-RA
tunnel-group xxxxxx-ipsec-attributes
pre-shared-key *.
tunnel-group STATIC2_WANIP type ipsec-l2l< problem="">
IPSec-attributes tunnel-group STATIC2_WANIP
pre-shared-key *.
tunnel-group STATIC1_WANIP type ipsec-l2l
IPSec-attributes tunnel-group STATIC1_WANIP
pre-shared-key *.
context of prompt hostnameand...
ASA5505-STATIC2 host name
domain xxxxxxxx.local
activate the password XXXXXX
passwd xxxxxxxxxxx
names of
!
interface Ethernet0/0
switchport access vlan 3
!
interface Ethernet0/1
switchport access vlan 2
!
interface Ethernet0/2
switchport access vlan 2
!
interface Ethernet0/3
switchport access vlan 2
!
interface Ethernet0/4
switchport access vlan 2
!
interface Ethernet0/5
switchport access vlan 2
!
interface Ethernet0/6
switchport access vlan 2
!
interface Ethernet0/7
switchport trunk allowed vlan 1-2
switchport trunk vlan 1 native
switchport mode trunk
!
interface Vlan1
nameif dmz
security-level 50
IP 10.10.0.1 address 255.255.255.0
!
interface Vlan2
nameif inside
security-level 100
192.168.16.1 IP address 255.255.255.0
!
interface Vlan3
nameif outside
security-level 0
IP address xxxxxxxxxxx 255.255.254.0
!
passive FTP mode
clock timezone CST - 6
clock to summer time recurring CDT
DNS lookup field inside
DNS server-group DefaultDNS
Server name xxxxxxxxxx
Server name xxxxxxxxxx
domain xxxxxxxxxx.local
access extensive list ip 192.168.16.0 to_hq allow 255.255.255.0 192.168.0.0 255.
255.0.0
192.168.16.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.0.0 255.
255.0.0
pager lines 24
MTU 1500 dmz
Within 1500 MTU
Outside 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400Route outside 0.0.0.0 0.0.0.0 xxxxxxxxxxx
Global 1 interface (outside)
NAT (dmz) 1 0.0.0.0 0.0.0.0
NAT (inside) 0 access-list sheep
NAT (inside) 1 0.0.0.0 0.0.0.0
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.0.0 255.255.0.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
card crypto cmap1 match 10 address to_hq
card crypto cmap1 10 peers set xxxxxxxxxxxxxx
cmap1 crypto 10 card value transform-set ESP-3DES-SHA
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
No encryption isakmp nat-traversal
Telnet 192.168.0.0 255.255.0.0 inside
Telnet timeout 5
SSH timeout 5
Console timeout 0
management-access inside
dhcpd dns 192.168.9.2 xxxxxxxxxxxx
!
dhcpd address dmz 10.10.0.100 - 10.10.0.199
dhcpd lease 10800 dmz interface
dhcpd enable dmz
!
dhcpd address 192.168.16.101 - 192.168.16.131 inside
lease interface 10800 dhcpd inside
dhcpd xxxxxxxxxx.local area inside interface
dhcpd ip interface 192.168.9.50 option 66 inside
dhcpd allow inside
!a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
tunnel-group HUB_WANIP type ipsec-l2l
IPSec-attributes tunnel-group HUB_WANIP
pre-shared-key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
!
global service-policy global_policy
context of prompt hostnameAny help is appreciated
Hello
Seems to me that the ASA named STATIC2-ASA5505 lack some essential associated VPN configurations.
The encryption card is not attached to any interface
Configure this
cmap1 interface card crypto outside
The Crypto ISAKMP is not enabled on any interface
Configure this
crypto ISAKMP allow outside
Hope this helps
-Jouni
-
Why can't I play the games on Yahoo Games? Game will not come to the top.
Whenever I try to play a game like dominoes or canasta on Yahoo games, I go so far as to choose a group to play then the connection never ends. I went through all the steps in the help of Yahoo, with no improvement. I uninstalled and reinstalled flash player and it did not help. I have connected to my system of work from my home machine, and I'm able to go right into. I can go in my former office on Vista with no problems. Both of my computers are Wi - Fi, but my office is at the same time.
Hi EdieKnight,
· What happen when you try to play the games?
· You receive an error message/code?
· What web browser do you use?
· You play games online?
I suggest you to update flash and java and check if it helps.
http://get.Adobe.com/flashplayer/
http://Java.com/en/download/index.jsp
For reference:
Troubleshooting for Yahoo! Games issues: ensuring that JavaScript is enabled and updated
http://help.Yahoo.com/l/us/Yahoo/Games/Troubleshooting/browser-07.html
Troubleshooting for problems of Yahoo! Games: Flash Player update
http://help.Yahoo.com/l/us/Yahoo/Games/Troubleshooting/browser-06.html
You also contact Yahoo support for more help and information.
http://help.Yahoo.com/l/us/Yahoo/helpcentral/
Reply back with more information.
-
As I upgraded v38, I can receive and delete mail, read mail after right click on the name of box mailboxes to open in a new window (used for the mailbox just left click), but not compose a message, reply or forward. No error messages, but nothing happens when I click on write, answer or next button. I'm on Win7HomePro. That is what it is? Thank you!
OK, I downloaded a new copy and it seems that if I am OK now - at least, the window again message happens again.
-
HP Officejet 4630: Printer Wizard will not come to the top
After hours because the printer is offline (for no apparent reason) and download of new software and uninstall and reinstall the printer twice, the printer works now. However, I went to analyze and realized that the Printer Wizard has disappeared. He appears as one of the choices of the printer, it is not in my list of programs and icon Office disappeared. Would appreciate any help that I am quite frustrated and worried that I'll lose the printer again. Thank you
Well, the next thing to do would be to uninstall all software associated with the printer from the PC. Once done, download and install the latest drivers by clicking on this link.
Please let me know if it solves your problem.
-
Camileo H20 will not come to the top with the power of the battery
My Camileo H20 won't be to point to the power of the battery. It runs on AC power when connected to the charger. I noticed when I press battery/memory sometimes, it happens on battery showing - TOSHIBA - but goes out as soon as I stop fastening lid close the card cover. Bad contacts with battery maybe?
Any ideas?
Hello romancos,
have you noticed, there is an insulator on the battery?
It protects the battery while shipping to the France.
If you don t have, please delete.If the issue continues, please try another battery.
welcome them
-
Computer will not start at the top. I was first getting a 'file problem' message on nv4_mini.sys. After finding that someone else had the same problem and I responded went to try the solution but then started to get the message that the file: \windows\system32\config\system is missing or corupted. Have tried to do where I could start up in safe mode and cannot. Tried to boot from the installation CD, but when I try to make the system recovery and choose the system to recover nothing happens. This isn't regarding the password. I have a Dimension 4500 XP sp3
Hi BrianJ641,
Follow the steps in the article.
http://support.Microsoft.com/kb/307545
Note: When you are prompted to type the administrator password, you can type if you set the password. If the administrator password is blank, just press ENTER.
-
Layers will not appear on the top of my Flash files. Help, please!
I have a little problem, I created a test using Dreamweaver 8 site to show how layers will be show/hide on the overview of the buttons. The problem I have is that these layers which are placed on top of some files Flash will not be displayed when I transfer my buttons. Can someone tell me why? If you look below, you will find two links, "index1.html" shows layers will be show/hide, but that's because it isn't a Flash file in the blue zone dark. In "index2.html", you will see that the layers don't hide/show when I transfer my buttons due to the dark blue area is a Flash file. Is there a way to solve this problem in Dreamweaver 8?
index1.html
index2.htmlAll active content on a page will always come to the top, so to speak,
including Flash, some elements of form, Java applets and controls Active X.
This means that each one will push through the layers. It is not a good
Cross-browser/platform reliable way to solve this problem, but if you can be
confident in your visitors using IE 5 + or NN6 +, you can then use the Flash
setting wmode (However, Safari does not support this correctly!).Adobe articles:
http://www.Adobe.com/cfusion/knowledgebase/index.cfm?id=tn_15523
http://www.Adobe.com/cfusion/knowledgebase/index.cfm?id=tn_14201--
Murray - ICQ 71997575
Adobe Community Expert
(If you * MUST * write me, don't don't LAUGH when you do!)
==================
http://www.dreamweavermx-templates.com - template Triage!
http://www.projectseven.com/go - DW FAQs, tutorials & resources
http://www.dwfaq.com - DW FAQs, tutorials & resources
http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
=================="rmiman" wrote in message
News:ern2d7$p9p$1@forums. Macromedia.com...
> I have a little problem, I created a test using Dreamweaver site
> 8 to the
> show how layers will show/hide on the overview of the buttons. The problem
> I am
> have is that these layers which are placed on top of some Flash files
> don't
> appear when I transfer my buttons. Can someone tell me why? If you look at
> below
> you will find two links, "index1.html" shows that the layers will be show/hide
> but
> It's because it isn't a Flash file in the dark blue area. In
> "index2.html" you will see that the layers don't hide/show when I rollover
> my
> buttons due to the dark blue area is a Flash file. Is there a way of
> Difficulty
> it in Dreamweaver 8?
>
> http://www.rminc.com/medresource/index1.html
> http://www.rminc.com/medresource/index2.html
> -
HP Officejet 6700 Premium: Scan function screen does not come to the top when selected
After updating Windows 10, the scan function when selected in the application wizard does not come to the top. Installed the driver updated, no effect.
Hello
Thank you for using the forum.
You have downloaded and installed the FULL features of HP software?
Here is the link for convenience:
We suggest that you uninstall the current drivers before reinstalling the software downloaded full of features.
Hope that helps.
Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.
-
HP Officejet 6500 a Plus-710n, multi-page document will not feed through the top.
There is no error messages, just won't get out the paper. I am able to scan from the glass top, individually, but will not feed from the top on several pages.
Hi Ginny29,
I see that you are having problems with your printer. I'll take a look at the document below.
Let me know how it goes.
Maybe you are looking for
-
Apple Watch - no follow-up of discount in the form
My Apple Watch doesn't follow my workouts longer after completing the most recent update of the OS. Is this a known issue?
-
Firefox says "verify password" when I try to sign enamel, IE works
I think this happened shortly after I did some cleanup: delete cookies, cache, Recycle Bin and temp files, etc.
-
Why my mac is very slow to empty the trash?
I'm trying to fix an external hard drive, leaving all the files and the re-formatting it. However when I tried to trash the files after repair, it's delete files at a rate of one every 3-5 seconds. There are more than 1 million files to remove. How c
-
I can't take a picture to copy into the Clipboard on iPhone iOS 9.2!
Can someone help me figure out how to hold on a photo to copy it to the Clipboard? Function still works in the browser and inside the appa like whatsapp, but not on the photos! the 6s 9.2 iPhone iOS Thank you!
-
Adding extra RAM for laptop HP Pavillion
I know that I can add 1 G more RAM for my HP dv6000 laptop which currently has 1 gig of RAM for a total of 2 G. But since I upgraded the OS from Vista to Windows 7 with SP1 64-bit, clocked at 1.6 ghz, do I add even more to reach a total of 3 G or 4