Modules running without permission

Similar Questions

• Flash player installs on several occasions without permission

  I have several times uninstall the Plugin Adobe Flash Player 12 and ActiveX Adobe Flash Player 12. These two settle on several occasions without permission. In Options > Options > advanced > updates, I have the option "check for updates but let me choose whether to install" checked, and it has been like that for weeks. I work from home and I'm on the net all sources of new aggregation day and without flash I don't get bombarded with ads flash constants and sudden noises, loud. However, these two will settle at least twice a day, forcing me to uninstall them manually every time.

  Cannot install plugins in Firefox. Plugins are software, like Firefox itself. They can only be installed by running the Setup program (.exe file).

  Flash Player is required to browse some sites, so it is safer to disable rather than uninstall it. To do so,

  1. Press Ctrl + Shift + A to open the Add-ons Manager.
  2. Click on Plugins on the left.
  3. On the right, the Shockwave Flash value "never enable" to turn it off completely. You can also set it to "Ask to activate" to be invited to start when you browse a site that has Flash content.
  • Management and uninstall plug-ins | Support for Mozilla

  If you insist to get rid of the Flash Player, there is an uninstall program that you can download to get rid of all installed versions. See the following page.

  • Uninstall Flash Player for Windows | Adobe support

• Vision Development Module run-time license?

  Hello everyone, I want to install an application to the University, I built on a laptop computer for use at another University. The application uses the driver NOR-IMAQdx for acquiring 2 USB, as well as various screw cameras since the vision development module. I know that there is no legal issue with Labview Run Time of distribution engine, but I would like to know where I stand with the side of the vision of the things. To install this application on the laptop I need to purchase the Vision Development Module Run Time License and software Acquisition of Vision for this laptop, if yes, how could I inculde it in installation? I noticed that the GUI installation gives me the possibility to include engines of execution and drivers, but I don't know how it works without the permit? Also, any idea on the cost? Any advice would be great, best regards, Joe

  Hey Joe,

  First the license covers the Module's development of Vision so should cover all the required drivers.

  You can download the runtime separately from here:

  http://search.NI.com/nisearch/app/main/p/bot/no/AP/tech/lang/en/PG/1/SN/catnav:, n8:13, ssnav:sup.

  You will need the license to activate it on the installation.

  Whether if it is a better idea completely, it depends on how you want to distribute your application.

  I hope this helps!

• without permission to download ocx

  I try to run geovision - get message "without permission to download ocx" help please

  Hi mitz,

  The reason why you get the error, 'without permission to download ocx' because you need to make changes to allow ActiveX.
  You need to go to Internet Explorer and make some changes.

  Go to tools, select Internet Options, then go to the Security tab and select Trusted Sites, then click the Sites button.
  Click Add and add the Web site to the zone of confidence. Under security levels, click on the custom level button.  Use the scroll bar
  and go to the ActiveX controls and plug-ins. For the settings, if permitted prompt Set or activate if the prompt is not available. Select ok
  and exit IE.

  Then try again and see if you can run Geovision.

  If this isn't the case, please answer back with errors and let us help you more.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• announcement on installs without permission

  There is this addon that installs without permission. 'S called it funklyrics 1.122 it seems to be able to turn on even after being disabled. It seems the ride through an update. The program itself seems to be harmless but implements small adds trying to sell the item you want to. I disabled it just one more time it updated today to ver 1.122 on 16/07/2013

  Is there a way to permanently remove this adware from Firefox?

  Well I feel a little like a donkey, but I deleted it. After the answer of cor - el I started looking for more after trying to delete it in safe mode. Found a folder to x 86 programs named "FunkLyrics" looked around inside and saw an uninstall program. Well, I have no trust in it and used windows to remove it. Some "files in Google Chrome" was also in the file does not mean it has been installed by Chrome, but I just installed Chrome. in any case Windows removed and it shows no more in the Add-ons. Needless to say that I also removed Chrome. I decided that I really don't need. Firefox is good enough for me.

  Thanks to everyone who helped me.

• Using Win 2000 Prof Installed Firefox 9.01 without permission how to go back

  Mozilla installed Firefox 9.01 without permission and is not compatible win 2000. How to uninstall and go back to 6.0 or 8.0?

  Firefox 9.0.1 is compatible with Windows 2000 SP4.
  
  http://www.Mozilla.org/en-us/Firefox/9.0/system-requirements/

  What specific problems with version 9.0.1 meet you?

• I am too blind to find the download of the SP1 2015 Vision Development Module Run-Time?

  Research on ni.com for 'Vision Development Module Run-Time 2015' brings me to a lot of results, but not "Vision Development Module Run - Time 2015 SP1".  Is this product late?

  The Vision Development Module 2015 SP1 has already been published a few days ago.

  Hello Guenter

  I could not find, too and study this.

  As a solution for the moment, you can use the

  Vision Development Module 2015 SP1 - National Instruments
  http://www.NI.com/download/vision-development-module-2015-SP1/5798/en/

  and when asked to choose what features must be installed uncheck everything except the TERM NI Vision 2015 SP1, see the attached picture.

  Best regards

  Kathrin

  Certified LabVIEW Developer (CLD)

• Development of applications that run without installed DAQmx

  We want to develop the executables that include optional calls to connected DAQmx hardware.  It will be used for purposes of internal development and allocation of customers. We would like to include optional features such as temperature logging using the thermocouple NI 9211/USB-9162 entry-level camera.  If a customer wants to use our application with record temperature, they can buy the necessary materials of NEITHER and install DAQmx drivers.

  The problem we are trying to solve is how to develop applications that work also for the case when a client does not want to buy the material and does not install the DAQmx drivers.  Ideally, we can include a button 'disable temperature logging' on relevant applications, which prevents all calls to the DAQmx drivers at run time.  For example by including calls in a business controlled by this button structure.

  The problem we seem to have is that executables resulting always require customers to install the DAQmx drivers, even if they don't need them.  It doesn't seem to be a way to make the optional installation, since the source screw included calls to DAQmx drivers, even if they will not be used by the customer.

  Clearly, a solution is to develop two families of screws and the applications, which include DAQmx calls and one who is not.  However, which will result in a horrible collection of code that will require the maintenance and parallel development.

  An alternative is to ask all customers to install DAQmx drivers.  Unfortunately, the size and complexity of downloads that results will be a significant deterrant.  It's already a shame that our distributed software is a 50 MB download, when the size of the code in C++ or VB would be less than a tenth of that.  Another factor of increase of 10 download is prohibitive.

  We must find a solution more clean.  All ideas, plase?

  We are currently with LabVIEW 8.5.1 and DAQmx 8.9.

  You can use the conditional structure conditional symbols and disable disable in the project to do. You can, for example, have a symbol called "HAVEDAQMX" and, say, use a 1 or 0 (or anything you want) to indicate that you want to run the project with or without DAQmx. In VI using the conditional turn off the structure. For HAVEDAQMX = 0 case put in the code to run without DAQmx. For HAVEDAQMX = 1 case put in the DAQmx code. When you build the application, if any will get used, and the other will be thrown.

  Attached is a simple project that does this. You can view the LabVIEW help for more information about the conditional structure disable.

• How to schedule tasks running without deleting?

  Today is holiday, but scheduled task does not, someone has suggestions on how to stop schedule tasks running without deleting?

  Thanks in advance for your suggestions

  Try to open the "Task Scheduler" in the control panel... Or, select run, type: services.msc

  MSC, locate the service, double-click "manual start" the value of autostart.

  close when through...

• Why did Windows using stealth tactics and install updates without permission or notice?

  Why did Windows using stealth tactics and install updates without permission or notice?
  It becomes a regular event, it also seems to restart in the middle of the night to set up these updates. I don't know what the intention but
  [Vista 32 bit] I returned this intrusion in the files to my PC and I always despise microsoft to decide to act like a pirate.  I'll give microsoft some time to answer this, but I expect to be as horrible as they are usually with the customer service.   So in a few weeks, I'll start to smear the name of microsoft as much as possible and sway anyone my possible to buy non-Microsoft products.

  Read here:

  Microsoft Update product team blog: Windows Update and automatic reboots

  http://blogs.technet.com/Mu/archive/2008/10/02/Windows-Update-and-automatic-reboots.aspx>

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows7/change-how-Windows-installs-or-notifies-you-about-updates>

  If you select the download updates but let me choose... option, no update will install without your approval. Suppose an update will require a reboot and does not approve the installation of an update until & unless you are ready to restart.

  You can change the AU for the "updates but let me choose whether to download and install them" setting. Once you have done this, you will need to approve the updates are downloaded, the updates are installed and where they are installed.

  I prefer "check for updates but let me choose whether to download and install them" setting.

  UTC/GMT is 13:33 Tuesday, January 31, 2012

• Windows 8 does not read DVD but CD runs without any problem

  Original title - I habe upgrade to windows 8 way back but my DVD player does not read DVD but CD runs without any problem

  DVD stalk does not read DVDs but reading the CD with no problems. Even in my computer drive shows as CD drive type.

  Hi Rohan,

  I suggest you try the steps suggested by AtishayMSFT dated dated March 6, 2012 at the following link:

  http://answers.Microsoft.com/en-us/Windows/Forum/hardware/DVD-drive-not-recognized-in-Windows-8/ad546c20-b916-4AD5-9858-52e10610ee14

  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows 7

• the system show my VM was running without any snapshots, but there are several delta files in data stores.

  Hello

  The system displays my VM was running without any snapshots, but in the data store, there are several delta as vmsd files, delta.vmdk files exist.

  
  

  is it possible to get rid of these files of delta file. Screenshot of PFA

  
  

  
  

  Thank you

  vm2015
  

  
  

  
  

  Create another cliché, and then use the option "Delete All" to delete all snapshots.

  That get rid of the files?

• If I run my query in Oracle, it runs without error, but when I run inside c# gives ORA-00911: invalid character

  I like to run below myQuery in c#, but saw the error. No idea what is the problem? If I'm running myQuery in Oracle, it runs without error. "I put all the +" before starting the myQuery line and "end of the line. but nothing changes.

  myQuery =

  with the CBC as

  (

  Select src.table_name src_table_name, src.column_name src_col_name, src.data_type src_data_type, src.data_length src_data_len, src.data_precision src_data_precision, src.data_scale src_data_scale,

  CBC. Nullable src_nullable, decode (T.Constraint_Type, 'P', 'Primary Key', 'U', 'Unique', ") as src_cons

  all_tab_columns CBC

  left join (select Cc.Column_Name, Uc.Constraint_Type

  of user_cons_columns cc, uc user_constraints

  where Cc.Constraint_Name = Uc.Constraint_Name

  and Cc.Table_Name = Uc.Table_Name) t

  on T.Column_Name = Src.Column_Name

  where table_name = 'INSTRUCTOR' and owner = "ERHAN"

  ),

  As TGT

  (

  Select tgt.table_name tgt_table_name, tgt.column_name tgt_col_name, tgt.data_type tgt_data_type, tgt.data_length tgt_data_len,

  TGT.data_precision tgt_data_precision, tgt.data_scale tgt_data_scale, tgt.nullable tgt_nullable,

  Decode (T.Constraint_Type, 'P', 'Primary Key', 'U', 'Unique', ") as tgt_cons

  from all_tab_columns tgt

  left join (select Cc.Column_Name, Uc.Constraint_Type

  of user_cons_columns cc, uc user_constraints

  where Cc.Constraint_Name = Uc.Constraint_Name

  and Cc.Table_Name = Uc.Table_Name) t

  on T.Column_Name = TGT. Column_Name

  where table_name = 'INSTRUCTOR' and owner = "SARIGUL"

  ),

  col_details as

  (

  Select src.src_table_name, nvl (tgt.tgt_table_name, first_value (tgt_table_name) more (order of nulls last tgt_table_name)) tgt_table_name;

  SRC.src_col_name, src.src_data_type, src.src_data_len, src.src_data_precision, src.src_data_scale, src.src_nullable, src_cons,

  TGT.tgt_col_name, tgt.tgt_data_type, tgt.tgt_data_len, tgt.tgt_data_precision, tgt.tgt_data_scale, tgt.tgt_nullable, tgt_cons

  the CBC

  outer join full tgt

  on)

  SRC.src_col_name = tgt.tgt_col_name

  )

  )

  Select *.

  de)

  Select the case sensitive option

  When tgt_data_type! = src_data_type or tgt_data_len! = src_data_len or tgt_data_precision! = src_data_precision or tgt_data_scale! = src_data_scale or tgt_nullable! = src_nullable

  then 'alter table ' | tgt_table_name | 'Edit ' | tgt_col_name | ' ' || src_data_type | ' ' ||

  -case when src_data_type null ('DATE') then

  on the other

  case

  When src_data_type in ('VARCHAR', 'VARCHAR2')

  then ' (' |) NVL (to_char (src_data_len), ' ') | ') '

  otherwise decode (nvl (src_data_precision-1),-1, null, nvl (to_char (src_data_precision), ' ') |) ', ' || NVL (to_char (src_data_scale), ' ') | ')')

  end

  end

  ||

  cases where tgt_nullable = 'Y' then 'null '.

  of another end 'not null '.

  || tgt_cons

  When tgt_col_name is null

  then 'alter table ' | tgt_table_name | 'Add ' | src_col_name | ' ' ||  ' ' || ' ' || src_data_type | ' ' ||

  -case when src_data_type null ('DATE') then

  on the other

  case

  When src_data_type in ('VARCHAR', 'VARCHAR2')

  then ' ('| nvl (to_char (src_data_len), ' ') |) ') '

  otherwise decode (nvl (src_data_precision-1),-1, null, nvl (to_char (src_data_precision), ' ') |) ', ' || NVL (to_char (src_data_scale), ' ') | ')')

  end

  end

  || tgt_cons

  When src_col_name is null

  then 'alter table' | tgt_table_name: ' drop '. tgt_col_name

  end alter_statement

  of col_details

  )

  where alter_statement is not null;

  using (OracleConnection conn1 = new OracleConnection (connectionString))

  {

  conn1. Open();

  Dim myQuery = "";

  using (OracleCommand = new OracleCommand (myQuery, conn1) crtCommand)

  {

  richTextBox1.AppendText (output);

  richTextBox1.AppendText (crtCommand.ExecuteNonQuery (). (ToString());

  richTextBox1.AppendText (output);

  }

  }

  VR;

  myQuery=
  @"with src as
  (
  ...
  ";
  

  That means a @ before the beginning of a string literal mean? -C# Foire - Site Home - MSDN Articles

  as an example

  OracleCommand cmd = con.CreateCommand();
  cmd.CommandText = @"begin apps.mo_global.init('SQLAP'); begin apps.fnd_global.apps_initialize(5710, 20639, 200); end; end;";
  cmd.ExecuteNonQuery();
  

  richTextBox1.AppendText (crtCommand.ExecuteNonQuery (). (ToString());                            

  is this correct? Not sure

  as example try

   using (OracleConnection conn1 = new OracleConnection(connectionString))
  {
      conn1.Open();
  
      string myQuery = "......";                  
  
      using (OracleCommand crtCommand = new OracleCommand(myQuery, conn1))
          {
              richTextBox1.AppendText(Environment.NewLine);
              // richTextBox1.AppendText(crtCommand.ExecuteNonQuery().ToString());
  
  OracleDataReader reader = crtCommand.ExecuteReader();
  while (reader.Read())
    {
      richTextBox1.AppendText(reader.GetString(0));
      // may be also
      // richTextBox1.AppendText(Environment.NewLine);
    }
  
              richTextBox1.AppendText(Environment.NewLine);
  
          reader.Dispose();
          cmd.Dispose();
          }
  
      con.Dispose();
  }
  

• How can / do I compeletely uninstall/remove the unwanted "Web Developer Extension" that was automatically installed on my computer without permission, when I reset Firefox in safe mode?

  Reset Firefox in safe mode. Click 'Help', then 'restart with modules disabled.

  After the reboot, Checked 'reset all the preferences of Firefox by default'

  Once completed, found three new tabs, one asking if I wanted to continue the previous session, a second Firefox, by saying: "Welcome to Firefox".

  And a third with the title, "Web Developer installed"

  By clicking on the tab took me to: http://chrispederick.com/work/web-developer/installed/11/ saying "the Extension Web Developer has been successfully installed."

  The new Web site, which also requested donations, seems not related to Firefox. Anyway, nobody has ASKED MY PERMISSION to install

  AM CONCERNED ABOUT THE EXTENSION NOT DESIREE AND WHAT ELSE IT CAN DO WITHOUT MY CONSENT.

  I DO NOT FAULT Chris Pendrick 'extension' on my computer, but do not know how to remove/uninstall completely.

  Can anyone help?

  https://support.Mozilla.com/en-us/KB/uninstalling%20add-ons#w_how-to-uninstall-extensions-and-themes

• Why User Account Control allow me on IE without permission after resetting IE

  A few days ago I couldn't get on the Internet because IE would not work and internet connection was ok so out of desperation I did a reset of the EI. It still does not work then a member of the family came and got it works, but now I get the popup to permission to the user account control every time that I log on the desktop by clicking the shortcut of IE.  I went into the folder security and disabled UAC and now I only get this popup whenever I click on the desktop IE. This never used popup lights up when clicking on the shortcut of IE, so something must have happened when I did the reset Internet Explorer.  Does anyone know how to keep control of user account for all but IE?

  I have a feeling that I accidentally changed a setting on IE and probably should not have an IE reset.but now the problem is that I like to keep the popup of User Account Control permission for everyone, but the IE shortcut on my desktop.

  Furthermore, family member right clicking on the desktop for IE shortcut and did something with run as administrator to get IE working again.

  My nephew looked at the problem that I had some time ago, but I told him to forget it because he really didn't have time to work on it. I just kept off UAC all these months and had no problems I do not download anything that I'm not sure. However, a few days ago I went back to this problem. I tried checking with the Compatibility tab, and as said above "Run as Administrator" was unchecked. This time I went to the contextual on properties of Internet Explorer and click on Advanced tab. Then I unchecked the run as Administrator box and I went back and UAC enabled and everything works well. Without UAC popups more!  I also did this for the exchange of information in the start menu and on the Quick Launch bar. For some reason any one on the keyboard had worked this time (he had not earlier) without a popup UAC even before I made the changes.  This is exactly what made me do some exploring more to see if I could get the other IE shortcuts to work.

  I believe that another Member of my family who had helped me to get IE to work when I had problems to make on the internet even after a reset IE active the option "Run as Administrator". He has not been bothered by the popup and said if I was annoyed by it just turn off like he said I had a very good program antivirus (Norton) installed on my computer and it always warns you if a program you want to install is safe or not safe.

  Hope this might help someone else who may have this problem.

  Holly