Similar Questions

• What card PCI adapter USB can I use on my Satellite C

  Hello

  My USB port of remaining work has now passed away, and I'm stuck because I can't print longer (especially children can not print their homework!) I discovered recently the understanding that I can get either the replaced motherboard (expensive so not an option!) or get a * card with USB ports * on what goes into the card reader at the front of the laptop?

  No one knows exactly what I buy as all this seems quite complicated for me!

  Any help would be greatly appreciated! Thank you, Kerry.

  Hi Kerry

  Can you tell us more about your Toshiba laptop?
  What model do you have?
  Have you tested the functionality of all USB ports?
  How old is your laptop?
  I want to say if the warranty is still valid contact the nearest Toshiba service and ask for help?

  You have a new printer with WLAN indoors. If so, you can print using the WLAN connection.

• Box 8472 s NOR-USB CAN be used only

  I have the box 8472 s for a while and have not until I do works in themselves. Is this a way to config box 8472 s CAN, without connecting any clock and trigger signals to the module?

  If you can, please give me an example VI?

  Thank you

  HS can and LS can use different physical layers that are not compatible. They refer not only to the speed that they can communicate. You will use the 8473 to talk to a HS CAN network and the 8472 to talk to a network CAN LS. You cannot mix HS and LS nodes in a single network.

• Already have a bootable Windows 10 USB, can I use it with Bootcamp?

  Already have a Windows 10 USB bootable. I converted to an ISO using an Apple Guide file. Bootcamp says:

  In addition, on Bootcamp it shows Windows 7 or later version instead of Windows 8 or later.

  1. Please make sure that your USB Installer is not an installer 32-bit/64-bit mixed. If it is greater than 4 GB, it's a mixed Installer.

  2. Please download an ISO 64-bit of the https://www.microsoft.com/en-us/software-download/home for your desired version of Windows. You may need your product key for Windows 7.

  For Windows 10, MD5sum values

  OpenSSL md5 Win10_1511_English_x64.iso

  MD5 (Win10_1511_English_x64. ISO) = a0d4271b7537732a060909fd39d54829

  OpenSSL md5 Win10_English_x64.iso

  MD5 (Win10_English_x64. ISO) = 23e397a21a9e01f141c64b7e1260314a

• Satellite Pro 4320 - can I use 256 MB of ram in slot A or B?

  Can I use 256 MB of ram in the slot A or B or 128 MB maximum size?

  Memory module 128 MB is a size that can be used in a slot.
  As I remember the unit supports the 64 MB internal memory and 2 external slots for extension of memory.
  The device supports max 320Mo memor 64 MB + 256 MB (2x128MB)

• for control voltage can we use usb-6001?

  where can I find the usb-6001 software and driver?

  You can certainly use a 6001 to control the tension... in line with the specifications of the device.

  Driver belongs to DAQmx, available here: http://www.ni.com/download/ni-daqmx-14.1/4953/en/

• How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?

  I want to integrate the ANSI C sample program ReadDigPort - ExtClk.c in my own big package.

  I want to use the internal clock of the BNC NI USB-6259 (.. 80 kHz 120 kHz).

  In the document:
  High speed M: Series Multifunction DAQ for USB - 16-bit, up to 1.25 MECH built-in BNC connectivity. / s,.
  is written:
  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  How can I use internal clock case OR USB - 6259 BNC for the acquisition of digital data in my own big software?
  With what other subsystem on the device can generate a source of the clock? How?

  It is possible to set a clock on an internal counter (for example ' Dev1/ctr0"):
  Creates channels to generate digital impulses that define the freq and dutyCycle and adds the channel of the task that you specify with taskHandle.
  DAQmxCreateCOPulseChanFreq (taskHandle, "Dev1/ctr0" units, clockName, idleState,
  initialDelay, freq, the duty cycle); works

  But it is not possible to drive this internal clock to a terminal (for example "/ PFI0/Dev1"):
  DAQmxErrChk (DAQmxCreateCOPulseChanFreq (taskHandle, "/ PFI0/Dev1", clockName, units, idleState, '))
  initialDelay, freq, the duty cycle); does not work: error DAQmx: measurements: type I/O of the physical channel does not match the type of I/O required for the virtual channel you create. Name of the physical channel: PFI0. Name of the virtual channel: clock

  The sample clock source can be derived from an external terminal (for example "/ PFI0/Dev1"):
  Sets the source of the sample clock, the sample clock rate and the number of samples to acquire or generate.
  DAQmxCfgSampClkTiming (taskHandle, "/ PFI0/Dev1", maximumExpectedSamplingRate, DAQmx_Val_Rising, ")
  DAQmx_Val_ContSamps, bufferSize); works. Acquire or generate samples until you stop the task

  But it is not possible to derive the internal counter of the clock (for example ' Dev1/ctr0"):
  DAQmxCfgSampClkTiming (taskHandle, "Dev1/ctr0", maximumExpectedSamplingRate, DAQmx_Val_Rising,
  DAQmx_Val_ContSamps, bufferSize); does not work. Error: Acquire or generate samples until you stop the task: make sure that the name of the terminal is valid for the specified device. See Measurement & Automation explore valid names of terminals. Property: Property of DAQmx_SampClk_Src: DAQmx_SampClk_ActiveEdgeSource device: Terminal Source Dev1: Dev1/ctr0

  Hi datafriend,

  using what it says is correct:

  Or sample DI source clock: Any PFI, RTSI, HAVE sample or convert clock, AO, Ctr n out internal and many other signals sample clock
  The digital subsystem doesn't have its own dedicated internal synchronization engine. Therefore, a sample clock must be provided another subsystem on the device or from an external source.

  This means that if you do not use an external signal as clock you can use the sample clock to HAVE it on board or at the output of the internal counter.

  There are also 2 ANSI C examples in this regard:

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4485

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4488

  So in both cases you have to use a fictitious task you need only for the generation of the internal clock (HAVE or CTR)

• Can I use two USB 6211 to replace a USB-6009

  Hello

  I got a labview vi., 5 output channels digital, 2-channel digital input, 2 analog inputs are necessary for the execution of this vi.  Initially a 6009 usb is used to run the vi. But I have only two usb ports 6211 now, which has digital to digital for each data acquisition 4 inputs and 4 outputs. I wonder, can I use two usb 6211 to run the vi. ? What should I do?

  Reverse lines are wrong, does that mean it will display 0 for false and 5 V 1.

  Active drive is the normal mode of the digital output: it generates tension when said.

  I forgot one thing: that you are behind the wheel of these lines, how much power do you need?

  Analog output is less powerful, it can give only 2-4 mA, while the digital output 6009 could give 8 my.

• Can I use a 6343 OR USB as an entry grounded to trigger an injector?

  Hello forum members

  I'd like to be able to fire a solenoid valve high speed (low impedance about 1.6 ohm) with a peak and hold the pilot injector (from AEM).  The output of the P & H driver is activated when the trigger on input is connected to the Earth.  Can I use the 6343 to provide this ground trigger?  I read somewhere in the manual that I might be able to use a PFI or DIO line as output a 0 at the wheel.  Is that what I'm looking for?

  Thanks in advance,

  -Mike

  Mike,

  On the second page of the document, he says: trigger impedance: 220 ohms, shot at 12 V input impedance ("draw" 60 my).

  IF YOU CONNECT THIS TO A LINE OF DIO, YOU MAY DAMAGE THE USB-6343!

  What you want is a driver as the series of ULN200x of ICs.  They can handle the 12 V and 60 my. Pour reversed are available as well as high logic of the DIO line will be on the ground in the entrance to the injector driver.

  Lynn

• Can I use my time capsule as desktop mounted hard shore via thunderbolt a usb cable

  Can I use my time capsule as desktop mounted hard shore via thunderbolt a usb cable

  No, but you can with an Ethernet one.

  (144234)

• Can I use a USB on an iPad Pro?

  I am looking for an iPad 12.9 pro with a memory of 128 GB. Also obtain loghning usb and keyboard. My question is this: can I use a USB stick with this for transfer autour files?

  For example: I'm starting a word on a desktop document, except at thumb drive and want to continue to work with the iPad Pro. Can I transfer the file to the iPad to change, resave the said folder and then go back on the desk with her?

  Could also transfer other files with this set autour upward?

  I need solutions for mobility and stationery and was looking to use it for small, things go, then an iMac for the intensive stuff.

  My idea would work out?  Thank you for your time and your help.

  You can use the portable hard drives Seagate/Western Digital Wireless

  OR

  These are your only alternatives for of SanDisk USB flash drives.

  https://www.SanDisk.com/home/mobile-device-storage/ixpand

  https://www.SanDisk.com/home/mobile-device-storage/connect-wireless-stick

  Good luck!

• Firefox uses a huge amount of memory on my computer. I continue to receive alerts from high memory usage. Can I do to solve this problem?

  Firefox uses a huge amount of memory on my computer. I continue to receive alerts from high memory usage. Can I do to solve this problem?

  300-400 MB is not huge.

  How much RAM do you have?
  
  How AVG reports that Firefox uses?

• can I use a Transcend 64 GB SDXC UHS Ultra TS64GSDU3 high speed class 3 memory card in my macbook pro

  can I use Transcend 64 GB SDXC UHS Ultra TS64GSDU3 high speed class 3 memory card in my macbook pro

  Should be good:

  On the SDXC - Apple Support and SD card slot

• Can I use a module of RAM 2 GB in Satellite M105-S1021

  My TECRA stopped with the BSoD (on another thread) and I had to leave my old Satellite M105 - S1021 and try and get it going again.

  First problem was running PRO XP without service pack and it was a * LEGAL * XP home upgrade - tries to install the SP, I received the product key was not valid message - cannot find the CD of XP Pro I used I called MS Support (sounded like in India) and vain - I expected to be provided with a valid key BUT NO! Why MS play the stupid guys like that on a software product is stupid IMHO and brief overview just puts a bad taste in the mouth and make me want to go to UBUNTU LINUX.

  So I had to search in a room full of hardware and PC (sad hoarder I have still a few BACK/WIN 95/98 machines) until I found a CD of XP PRO with a product key if I had XP PRO installed on this Satellite laptop and installed the latest SP

  BUT then I discovered that this laptop as well as it having previously PRO XP without a service Pack installed, there only 448 MB of RAM installed.

  Looking at the memory Crucial site they recommend an upgrade to 2 GB BUT it's 1 GB x 2. Opening the door of memory I see that I don't have that one not slot the two connectors.
  An upgrade to 2GB created using two modules of 1 GB Mem is therefore not possible.

  So my Question is:
  Can I upgrade to 2 GB using a slot OR slots on this L/T only able to take modules 1 GB Mem - I guess as I can / could get a module DDR2 PC2 - 5300 Mem.

  OR only can I put in a single module of 1 GB Mem.

  Can you please first tell us we are discussing here on laptop Tecra or your old Satellite M105 - S1021?

  For the Satellite M105-S1021 I found follow the news:

  Memory5
  -Configured with 512 MB DDR2 533 MHz SDRAM (using a memory module, a memory xpansion open housing)
  -256MB (min) / 2048MB (max), 512 MB of memory accessible service more accessible by the user memory available slot for 256 MB, 512 MB or 1024 MB DDR2 PC4200 533 MHz SDRAM.

  Compatible memory modules:
  PA3412U - 2M 51 Toshiba 512 MB DDR2-533 memory Kit
  PA3411U-2M1G Toshiba 1 GB memory DDR2 - 533 Kit

• Re: Satellite X 200-can I use the 800 mhz memory modules?

  Hello.

  I have a X 200 with 2024 MB of ram.
  I want to spend to 4048 MB ram.

  Is it possible to buy memory ddr2 667 or 800 mhz can I use?
  I think that my motherboard is as follows:
  Intel PM965 Express chipset.

  If its so I can only use ddr2 667 mhz, can I then use any mark at all, or is it special that toshiba recommends?

  You should be able to use the 800 Mhz modules, because the FSB supports 800 Mhz also.

  Greetings