Change the target fpga

Similar Questions

• How can I change the target directory for NOR-DAQ 6.9.3?

  I try to install NOR-DAQ 6.9.3 on a new laptop computer.  I tried to change the target directory, but the installer does not allow me to change it.  Is it possible to change the directory?

  When you say that the installation program does not let you change the directory target, you receive an error?  In my view, is it possible to change the target directory by selecting the feature in the feature tree, then by manually changing the target directory to the bottom of the installer.  When this is done, a pop up will occur who says a new folder will be created to save the files to.

• Change the target of the library Variable shared by program

  I have a project in real time with the code that runs on a host PC and a cRIO who communicate using a library of shared on the cRIO variables. I am hosting the variables on the cRIO because who has worked much better than the accommodation on the host PC. For normal operation, this structure works perfectly.

  However, I'm now trying to implement a system that will allow the user to choose if they want to actually run the code on the cRIO or run a simulated system. The simulated system would occur on the host PC, so it is logical for this application for variables to be located on the host PC.

  To account for these two cases, I would change the target of the variable shared library depending on whether the real-time system is running or if the simuation is executed. I can do easily manually simply by dragging the library in the Project Explorer, but prefer to automate this process.

  In short, I try to develop a code that will change the target of a shared library of variable.

  I tried to do that by opening a reference to the project file, using the properties to get the library reference and change the target. However, the target property is read-only. Is there another way to do this or I'm stuck having to do it manually?

  It turns out that I had a version of the shared library Variable on the cRIO, so even when I welcomed the variables shared on the host PC, he always wrote in the cRIO. In fixing this issue, I have been able to accommodate the library on the host PC and get all what to run much more simply.

• How to use the target FPGA and co. on the same chassis cRIO?

  I have a cRIO system consisting of a master chassis 9074 with several modules IO and EtherCAT 9144 slave unit.

  I want to run a CIE (see: http://zone.ni.com/devzone/cda/epd/p/id/5333) on the chassis of the master, this uses the analytical engine. At the same time I have to do some very urgent measures if I want to use the Board in hybrid mode, using analysis and FPGA engine at the same time (as described here: http://digital.ni.com/public.nsf/allkb/0DB7FEF37C26AF85862575C400531690.)

  But as soon as I add the FPGA target at one of the chassis, the feature of the ice on this chassis stops working. After some research, I found that the CIE can initialize is no longer the modules belonging to the frame that has the target FPGA on it. Error in the method Init of the CIE is: 65700 (indeterminate). This occurs when you try to use "for a more specific class' on the modules configured with a target FPGA on it.

  Someone knows what can cause exactly this problem and perhaps provide a solution/work around?

  Many thanks in advance.

  Hybrid mode requires you to have a bitfile compiled running on the FPGA to be able to read the Scan Interface IO Variables.  Move the target FPGA at the RT target module will allow Interface of scanning for this module, but the frame will always mode Interface of LabVIEW FPGA.

  

  To get fair access to the scan mode for the frame, right click on the chassis in the project, and choose Properties.  Then, modify the Scan Interface programming.  If you want to continue using the programming of FPGA and the Scan Interface set (hybrid mode), you will need to compile a bitfile (empty if you do not want programs on the FPGA again or containing your FPGA code).  By compiling, the support of the module scan mode for the modules under your RT chassis is compiled in your custom bitfile.  Then, on your VI RT, you need to use reference FPGA VI open to your newly compiled VI.  Once this VI is deployed and ongoing implementation, you get the data from you are the CIE.

  For more information, see this knowledge base article and Reference Interface of Scan CompactRIO and procedures.

• How to change the target of the .exe or shortened using the c language file

  Hi all, I use windows xp and there is a project in which I want to change the target of the file .exe and shortcut using the c language can any body help me with it, or give me any link I can gather some knowledge about this

  People who write programs and software to hang out in the MSDN forums, not here.  Visit the MSDN forums Web site and they will be able to help, if anyone can.

  http://social.msdn.Microsoft.com/forums/en-us/categories

• Number of cycles in the target FPGA VI

  Hello to everyone.

  I'm working on a project where I use sb RIO 9636. I subtract a number of past and present of the encoder pulses. Here, I have attached VI that I use as target VI. When I use simulated I/O lets say that the program works correctly. When I compile VI on sbRIO I noticed that the LED indicator named x = y? never flashes (even if she flashes simulation).  Also, when I put indicaton on the number of cycles of control, counting starts from a few very very valuable.

  Could someone help me?

  Thanks in advance.

  Hi Chupka993,

  I suspect that part of the behavior of the that you describe, is that when you change the clock of the loop, you change the speed at which the loop works. As GerdW said, this loop timer setting gives your code a rate at which it should run. For example, defining 1ms means that your code inside this loop executes once per millisecond, or 1000 Hz. ticks would work similarly, but I think the timescale ticks of the FPGA clock which is generally 40 MHz on our devices.

  When you have the timer set to 1 millisecond loop, the code in the loop executes 1,000 times per second, and your iteration count would be 1000 times before update output, which means that your code runs a full 1000 iterations once per second. If you change the clock of the loop of 2 milliseconds, the loop will run 500 times a second sense that your 1000 iterations would take 2 seconds to run. I think that the behavior you're seeing is because the iterations are produce faster that you intend.

  You need to understand exactly how much time it should take your loop to run 1000 times and then set the timer loop to the appropriate value to achieve this goal.

• date and time of transfer to the target fpga

  Hello world

  Can I transfer the date and time of real time on target fpga in a sbRIO?

  Thank you

  Hello

  You don't know why you would want to try this, can you clarify?  You cannot send the timestamp as it is, but according to what you want to do, there will be a solution.  This describes how a timestamp is stored in LabVIEW, but you probably want to send/receive something more easy to handle on FPGA.

  Michael.

• In the target FPGA read/write control function?

  Hi people,

  I learn a lot from the sample project FPGA, including how you can easily retrieve and set controls and indicators in an FPGA using the read/write control function running in an RT target.

  However, I can't find a way to do something similar in a FPGA target.  I've been down this road before - that is, trying to move the data in/out a looping VI FPGA (void) to a (parent) FPGA VI - where my memory points to reach what I needed use.

  So I was happy to see the palette FPGA enabled me to drop the control functions to read/write on a FPGA vi target.  But alas there where tons of errors (not compatible son for target, etc.) and I guess now it's not possible.

  So, just to be sure, I'm not missing something, is there something like control functions to read/write to use in an FPGA for read/write in an another FPGA (looped)?

  In addition, why would I be able to read/write on a FPGA vi control functions if they are not supported?  (Sorry for the n00b question)

  Thank you

  Steve

  maherhome wrote:

  You're right that I don't have this knot in my palette.  However, I also do not seem to have a Refnum Occurrence in the palette is in the FPGA (see below), but I need to synchronize several loops of FPGA and added research using the textfield in the VI editor (and if compiles and runs).  So 6 months to Labview and I'm fuzzy on how the palette is restricted

  I don't know what you're trying to prove here. There is no control of refnum in search in your image. Occurrences are available in FPGA, and for control of refnum for one you just right click on a function of the instance and create a control. If you can create a valid thread of a certain type of data, then you can create a control or the indicator for it, regardless of the question to know if this type of control or indicator appears in the palettes. However, the functions that you can use in the block diagram are limited by what is available in the palettes.

  maherhome wrote:

  Regarding orders read/write for the FPGA/lights, I'm surprised that the infrastructure developed to allow read/write between RT and FPGA has not mobilized to allow read/write between FPGA and FPGA.  The elements of memory function, but they are less convenient.

  You may have noticed that you cannot compile the individual parts of an FPGA VI and combine them later; This is because when you compile an FPGA VI, all its subVIs are essentially merged to create a single block diagram (with additional logic if one not reentrant Subvi is used in multiple locations, this is why it is not recommended on FPGA). The subVIs no longer exist in the FPGA compiled; reading and writing a control on them would make no sense. If you want similar behavior, use global variables - but understand that global variables store values in FPGA logic resources. Using the elements of memory (or FIFO, which can also store in memory) leaves more fabric available FPGA logic by storing data in resources specially designed for this purpose.

• Change the target application in FDMEE

  Hello

  I currently have HFM1 as my application target in FDMEE. Now, I need to change for HFM2. I registered in FDMEE HFM2. But not able to find where to change application target to HFM2 to start loading data to the new application. Any suggestions...

  Thanks in advance

  Hello

  FDMEE will provide the ability to select the application target while creating the import format... Assign this import format to the new location, you create and target Application will automatically fill...
  So, if you want the same 6 locations / import formats to point to HFM2, then you must create the objects to new (first import format) then location and other objects.

  Please let me know if it helps.

  Thank you

  HP

• Error 404 page not found when changing the target agent owner

  I use OEM 12.1.0.3. For all other target (DB, earphone, host, etc), I was able to change my account to another account owner.

  I sailed to targets-> all targets-> (right click on the target)-> target-> administrator access implementation.

  I used the "Change owner" button on this page for all the targets successfully. However, when I click on "Change in ownership" for the target of the agent, I get an error page 404 not found error. Has anyone seen this happen before? Is there a workaround to emcli that I can use?

  You can use the verb emcli change_target_owner to change the property of a target.

  Syntax:

  emcli change_target_owner

  -target = "target_name:target_type".

  [- target = "target_name:target_type"]

  -owner = "current_target_owner_name."

  -new_owner = "new_owner_name".

  EX:

  emcli change_target_owner-target = "myhost.oracle.com:3872:oracle_emd"- owner = "SYSMAN" - new_owner = "LNHAN"

  For more information on the verb, see:

  The verb reference

  Yes, I saw the "Not found" error when you attempt to change the property of a target of the agent from the console in EM 12.1.0.3. The operation works very well in 12.1.0.4 EM well.

  Kind regards

  -Loc

• change the target name in the Configuration of the analysis

  I need to change the name of the target in "Configuration of the analysis.
  but this isn't one of the options that can be changed...
  
  Basically, the target database name is ORCL.
  but we have several servers that have the same sid (ORCL)...
  
  There are moments when all the shows of the MA is ORCL (for examle the target research and monitoring desktop widget)
  and I can't tell what server he is...

  Hello

  I ran into similar problems. We have two parallel deployments of our databases, where we db1, db2, db3 on site1 and site2. It is a RAC configuration. Here's how I solved it:

  1. move all the databases of the grid, that you may have discovered.
  2. ensure that all hosts have agents and enrolled in the grid.
  3. navigate to targets-->--> addition of database, data bases
  4. Enter the host name of the place where to find the database.
  5. when the agent detects it, at this time, you can name the database you want. I would recommend calling it something like db1_site1.
  6. set your dbsnmp passwords and check the connections are successful.
  7 confirm the addition of these objectives in grid control.
  8. repeat the previous steps for the other sites.

  It worked pretty well for us. Additionally, make sure that your grid control unit can communicate with your databases on port 1521, or the listening port, since it sends commands to the listener of the GC box to validate the actions that you take in the user interface.

• Media Center. How can I change the target file during the recording of television? For example a hard disk separated.

  I need more space to keep TV recordings but don't know how to change the location of the destination file.

  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/94af8135-22ac-4d3d-bc2b-8a13afd04e6b

• Device's built-in FTP Explorer: change the target port?

  I have a simple NAS server that I like to use at school, but my router messes up when I try to open the default FTP port, which is 21, so I need to change the port.

  To access the NAS I use the built-in functionality of Windows Explorer FTP because I can't run a FTP program.

  The thing is, just now I managed to access the server without fault, but our router keeps closing the port, while it is properly set up now.

  Now my question is, when I enter ftp://sitenamehere in the search bar of Windows Explorer, can I specify which port to use?

  Obviously, I could continue with the purchase of a new router, but I don't have the funds for it right now.

  Help to alleviate this will be great.

  Thanks in advance for reading.

  ****.

  Just found out there is a problem with the server itself.

  The port is closed because the router sees not the server as an active device as I run it in safe mode.

  Seems I have to find a solution for this. Damn.

• Can I change the target of the link of a menu bar item.

  I have a menu bar on my website www.essentia.ie one of the buttons is home/welcome and is linked to http://www.Essentia.IE/index.html . I to him as www.essentia.ie (high field) well that these links have the same effect, it is causing difficulties for my SEO man. Is it possible to change this.

  Construction of Adobe Muse CC 7.3 5

  15 "MacBook Pro

  Thanks in advance

  Niall

  Yes, you can, but you need to change the type of menu to "manual".

• Cannot add to the target FPGA project

  I installed labview 2010 with en FPGA in real time

  In MAX under hardware, I see RIO0 under RIO devices.

  I also installed NI - RIO3.0, that I can see in MAX.

  When I try to add my FPGA PCI-7831R target in my project I don't see not all FPGA targets.

  How can I add my PCI-7831R to my project?

  LabVIEW FPGA and real-time 2010 require NEITHER RIO 3.5.1.  NOR-RIO 3.0 won't the good support for LabVIEW to create targets in the project, even if the FPGA will be detected in MAX.  You can install OR-RIO http://joule.ni.com/nidu/cds/view/p/id/2144/lang/en3.5.1.