Monitor cables do not work

Similar Questions

• HP 2159 m monitor audio does not work

  I would have assumed that the driver download, etc., would have set up correctly, but it does not work. (or I'm expecting something that does not happen?) For example, in listening to an Internet radio station, the only sound I get is from the hard drive & not the speakers in the monitor. Any ideas?

  How did your monitor connected to your PC?   VGA, DVI or HDMI?   VGA or DVI connections need an audio cable from the monitor to the audio output on the back of your PC.

  What model of PC you are using?

  I have this same split-screen on my e9280t PC connected via DVI with audio cable.

• Lightning cable does not work well

  Its already 3 weeks I use iphone to. the cable of the lightning that was in the box does not work well. I need to pull up to my phone charged. How can I solve this problem.

  Clean the lint on the connector of the lightning on the phone with a toothpick.

• Bluetooth/Hotspot tethering without cable does not work

  Hello world

  We have a weird put in place where Bluetooth does not (entirely).

  iPhone is last 9.3.3

  OSX is 10.11.4

  Setting up Personal Hotspot on the iPhone and then connecting via Wi - Fi laptop does not work. Error message "Unable to connect" standard and suggestion of using Wi - Fi diagnostics (also does not help).

  Go to Bluetooth prefs on OSX and the connection it does not work. Matching does not work, but we CAN see the iPhone. The WiFi scanner captures also the iPhone.

  If connect us the iPhone via the cable and then put in place a personal Hotspot, it does not.

  Surfing on the web, everything works. Disconnect the cable, and it stops again.

  I succeeded in pairing my iPhone to the laptop, so it seems apparent to another iPhone. I'm leaving work via cable uses a direct route via the cable which is a different connection method than live bluetooth signal?

  We have removed the Bluetooth of OSX preferences > no change.

  Reset us the iOS network settings > no change.

  Any ideas?

  Best regards, F.

  Have you looked at these?

  Share your Internet connection with Personal Hotspot - Apple Support

  iOS: System requirements for Personal Hotspot - Apple Support

  Get help with Personal Hotspot iOS - Apple Support

  Barry

• Satellite A100: Crossover Cable does not work

  I have a laptop TOSIHBA SATELLITE A100
  I tried to connect my laptop to another computer by Cable Crossover
  and he wasn't wotking, the sign (X) appeared to me as if the cable was not plugged.

  Note that (when I put my cable DSL ' it works well on the net)
  to know that I tried this cable with the other compuers, and it worked fine.

  Hello

  Strange?  :|
  I think that it s certainly not a physical LAN port problem because as you have already said the ADSL cable works fine.

  You have the right settings TCP/IP to connect to the other computer?
  Both computers must be in the same workgroup. In addition, you must set the IP fix, the subnet mask and the gateway!

  Also, try to remove the map LAN device manager and restart the laptop.
  After the new reboot the OS must load the required drivers and should recognize the card even once.

  Good luck

• Satellite U - LAN cable does not work after bios update

  Hello

  I recently installed upgrading the Bios that was detected automatically, and it seems to work fine. However, my LAN cable no longer works to connect to the internet. When I try to diagnose the problem, I tells me that I need to make sure that the cable is connected, but I can assure you that the cable is well connected.

  The cable worked fine just before the update to the Bios and I know it is not a problem with the connection of the cable itself because my other laptop always connects very well with it.

  Please can you help.

  Thanks in advance.

  Hello

  have you tried to restore the default settings in the Bios?

• Pay attention to the catalyst control center monitoring program does not work

  computer keeps displays the warning that monitoring program, catalyst Control Center does not work - what is it

  Hello

  ·         Did you make any changes before the show?

  ·         What operating system is installed on the computer?

  I suggest that you download and install the Catalyst Control Center from the AMD website and check if it helps.

  http://support.AMD.com/us/pages/AMDSupportHub.aspx

• HELP WITH LINKSYS WUSB100 attached to the USB EXTENSION CABLE - does not work

  Hello team,

  I own a LINKSYS WUSB100 usb adapter I used for my wifes desktop... I can connect to my home network to surf the net, but the signal is weak...  I decided to buy a 25' EXTNESION USB CABLE, which comes with a MALE AND FEMALE ends... I simply PLUGGED the cable on my DESK and PLUG the other end of the USB cable from the LINKSYS WUSB100 card and waiting for the COMPUTER TO RECOGNIZE the card without any problems... To MY SURPRISE, the computer would not have hired the LINKSYS CARD... He said "the search for new deivce, peripheral found but not hired"(Something like that)... in any case the desktype sees the device, but willl not hired there as a LINKSYS and I cannot search FRO all networks... As soon as I unplug the LINKSYS of the cable and plug it into the USB port of the computer - BAM my network comes up with a weak signal... Can anyone understand this? My cable is too long?

  Thanks a lot for all inpiut!

  DOn

  dax0007 at hotmail

  There is a standard length for the cable. It will not work with 20 foot extension... Try the cable up to 3-4 feet short and check.

• Source and program monitor buttons do not work in first Pro CC for me

  With the help of first Pro CC for the first time since the last update. When you use my MacBook Pro to change keys to play, mark, mark etc. do not respond when you press on using trackpad. Keyboard shortcuts do not work. Here is a screenshot of my screen and if anyone has any ideas based on what is stated at the bottom of my files on the left. Here are a few features on my mac:

  Model name: MacBook Pro

  Model identifier: MacBookPro11, 3

  Processor name: Intel Core i7

  Processor speed: 2.3 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 6 MB

  Memory: 16 GB

  Boot ROM version: MBP112.0138.B02

  Version of the SCM (System): 2.19f3

  NVIDIA GeForce GT 750M:

  Chipset model: NVIDIA GeForce GT 750 M

  Type: GPU

  Bus: PCIe

  The PCIe track width: x 8

  VRAM (Total): 2048 MB

  Provider: NVIDIA (0x10de)

  Device ID: 0x0fe9

  Revision ID: 0x00a2

  ROM revision: 3765

  gMux Version: 4.0.8 [3.2.8]

  Exhibition:

  Color LCD:

  Display type: LCD retina

  Resolution: 2880 x 1800

  Retina: Yes

  Per pixel: 32-bit color (ARGB8888)

  Main screen: Yes

  Mirror: Off

  Online: Yes

  Integrated: Yes

  Intel Pro of Iris:

  Chipset model: Iris Pro Intel

  Type: GPU

  Bus: integrated

  VRAM (dynamic, Max): 1536 MB

  Seller: Intel (0 x 8086)

  Device ID: 0x0d26

  Revision ID: 0 x 0008

  gMux Version: 4.0.8 [3.2.8]

  Hello

  Have you tried to reset the preferences?

  You can also try to rename the Adobe folder in the Documents to OldAdobe, but this will make you lose workspaces shortcuts and personalized keyboard.

  Let me know if this helps.

  Thank you

  Regalo

• Qosmio X 70-A - 11 Q-monitor HDMI does not work

  Hello

  I'm working on my laptop with 2 external displays. It is connected via the VGA and the other via HDMI. Everything worked fine until yesterday when my HDMI monitor could not be found.

  Things I've tried:
  I tested the moitor by connecting it with another computer, and it worked (with HDMI), then the monitor can not be the question.
  I also tried another HDMI cable... didn't work ether.
  BIOS is updated to the latest version
  graphic driver NVIDIA graphics card and the graphics card intel standard is updated to the latest version.

  Also a strange thing: when im in the menu of the BIOS while having VGA connected the screen keeps turning black for 1-2 seconds and then turn it on again

  Would be nice to get advice on what I can do :)
  Thank you

  Hello

  You are able to use the HDMI output port without connecting to another additional monitor to the VGA port? Please check because in my experience, it should be possible to use the HDMI or VGA port.

  However, I think that the problem might be related to one of the graphic card driver.
  Why? I think that a video output port would be controlled by a single graphics chip.
  In the case where you are using two monitors at the same time (VGA and HDMI) video card (nVidia or Intel) would control VGA port and the other HDMI port.

  I think that you need to reinstall the Intel display driver.
  First, you must uninstall the installed Intel display driver of the system (this in Device Manager). Then, you must restart the laptop. On the page of the Toshiba UE driver you will find the latest Intel driver v10.18.10.3308
  This driver is released to win 8.1 and 8 Win and Win 7

  Recommends that you install this version to fix the HDMI problem

• Satellite A110-137: serial USB 1.1 Cable does not work

  My computer is Satellite A110-137 and the operating system is Windows XP Home Edition v 5.1 service pack 2. Language setting is the Finland.

  I have a prolific USB driver cable RS232 2.0.0.26 version 1.1.

  It does not at all. When I try to connect it to a package Kantronics KAM radio modem using Hyper Terminal there is an error COM3 message: ei voi games. Tarkista porttiasetukset. (COM3: cannot open.) Check the port settings).

  The settings that I have are 9600 bps, 8 data bits, zero parity, 1 stop bit, hardware flow conrol. It's the same thing in device driver settings and the settings of the Hyper Terminal. It is 100% sure that the problem is somehow related to Toshiba or Windows XP as the same USB converter RS232 perfectly works and right the first time with for example Fujitsu ErgoPro have Windows 2000 (and it's a machine Pentioum 233, very old stuff indeed).

  I can't get any help of Prolific, their home pages seem to be offline now.

  Hello

  I studied a little on the net and it seems that this converter RS232 USB 1.1 creates a virtual serial port (possibly the com 3)
  As far as I know the built-in modem is using the same port.
  Possibly there could be compatibility problems.

  However, this is not a product of Toshiba and this is why I would recommend contacting support of the prolific.
  I've been on the site and it of online.

• EliteBook 8460p and external monitor/projector does not work

  We have several 8460 with the same question.

  They work fine until you try to connect to an external monitor/TV/projector and then the trouble begins.

  When you use Fn + F4 to establish a dual monitor output the external monitor and integrated display switches between the two, as if the PC cannot determine the display to use. On rare occasions, it works but it is not reliable. I ve it first met on a fair and when I tried it before the session, it worked fine. During the session it just started this behavior. I took it out and replaced the graphics drivers, BIOS and made sure that the resolution was not the issue. It worked fine and I returned it to the room of the lesson and he did it again.

  I started to believe that the projector was the wrong part here, so I didn't want to use the PC again on this fair, but no other computer shows no signs of distress.

  Since then, it was at the beginning of this spring, I ve seen and experienced the same problem with several computers of the same type and with different monitor and they all behave in the same way.

  I have spent some time now and searched the web but found nothing I ve doesn't explain anything around it and so far no update driver, and no other updates (including a full installation) has solved this problem.

  There are the HP Elitebook 8460p with AMD graphics card in the computer.

  There is no any other indication that something isn't going to the newspaper or whatever it is.

  Any suggestion of what may be the cause of this is useful.

  Hello and thanks for the reply.

  The original problem is old, from 2012, in fact and more or less no longer applies. Some of the more troublesome computers has been replaced with other models at the time and the 8460 p is used more or less entirely users who do not have the need for external screens.

  Have not seen it since a long time but we've updated the BIOS and drivers a couple of times so the current status is in fact "stable".

  Thus, we can say that the problem is not more, but whatever solved the problem is unknown.

• Cannot send email - can receive, moved to AAFC of fla. worked in fla on cable does not work online telephone wva

  cannot send emails, but receive them WORKED LAST WEEK on FLORIDA CABLE NOT HERE in AAC ON PHONE LINE HELP

  We don't need your address, we need your e-mail program. Windows Mail? Windows Live Mail? Hotmail? etc.

  Please post any error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread.

• Windows 8 audio via hdmi cable does not work on the desktop

  im running windows 8 on a desktop computer I plugged my TV I have the video works fine but my sound does not come through, and I don't have the option start normally with windows 7 and below so I do not know where to find the control panel. Anyone know how I can get it set up to run it. I go to a surround system from Panasonic connected to my TV through hdmi cables.

  Hello

  Thanks for the reply. I'm sorry to know that you are unable to see the high definition Audio Device and other options.

  1. What version of Windows are you using?
  2. What do you see under sound, video and game controllers?

  You can try the above steps through the steps below.

  Method 1

  1. press on Windows Logo key + X. Click on Device Manager.

  2. search for the sound, video and game controllers.

  3. under it, you will find high definition Audio Device.

  4 right-click on it, you will see turn off the option.

  5. click on disable.

  5. again right click on high definition Audio Device to activate.

  Method 2

  1. Press on Windows Logo key + X.  Click on Control Panel.
  2. Click hardware and sound.
  3. Double click on sound.
  4. Under the playback tab, you should see your HDMI device.
  5. Right-click on it and select set as default device.
  6. Click Ok.

  Hopefully now, you will be able to find these options. If the problem persists, get back to us. We will be happy to help you.

• New computer, new monitor, InDesign6 does not work as it should

  I recently bought a new laptop with dedicated graphics card and processor 6, Windows 7 operating system.

  I installed Creative Suites 6 to a new disc. Photoshop and InDesign worked as expected.
  Then, I connected a new monitor (Samsung 28 4 k ultra hd). While retained all Photoshop features, InDesign has lost much of its functions.

  For example, I can't spend the transformation tool free back to the selection tool.

  I am unable to the graphic design placed even if I have already when I first installed the software on the new computer using another monitor.
  While I can right click on the text to change the font and size, I can't click on the toolbar at the top to change the font and the font size.

  The functions that I'm trying to use are NOT greyed out.

  Things that I tried to solve the problem: installation from download instead of the disk, check / install updates.

  What can I do to return all features of InDesign on a computer and monitor that can handle more load?

  
  I thank in advance.

  Willi, this isn't Windows 7, Mac...

  Most likely, the problem is the following: panels and InDesign tools answer not to the clicks of the mouse (Windows 7/Vista)