Bluetooth/Hotspot tethering without cable does not work

Similar Questions

• Lightning cable does not work well

  Its already 3 weeks I use iphone to. the cable of the lightning that was in the box does not work well. I need to pull up to my phone charged. How can I solve this problem.

  Clean the lint on the connector of the lightning on the phone with a toothpick.

• sortedAscending without sortingKeys does not work

  I try to rearrange my ListView. There is now just the opposite of how it should be. That's how I:

  GroupDataModel {
       id: fromDataModel
       grouping: ItemGrouping.None
       sortedAscending: true
  },
  

  But it does not work. It is not matter, unless sortingKeys is present, sortedAscending has no influence.

  I'm not sortingKeys, because I have only one thing in the list, and I don't want to be ordered as I received it.

  I propose to replace GroupDataModel with ArrayDataModel. It can also store a list of maps, but is not reorganize its inputs.

• BlackBerry Smartphones Upgrade causes the connection Bluetooth to the desktop software does not work

  I'm a business traveler road warrior who lives and dies by my BlackBerry synced with my laptop.  I just spent most of November on the road and worked hard the BB and laptop.  The two worked perfectly.  I was able to sync the BB to the laptop with Bluetooth or USB cable and not problems.  Since I was AT & T, I could use the BB as a modem for laptop and get 3G service everywhere wherever I was going.  Life was good back in the day... November 2010.

  Then... I get some downtime and decide to meet the guests of the BlackBerry software desktop that there are updates available for the desktop software and software of the device of 9000 "BOLD".  I decided that since I have no immediate need and criticism so I can update.  So I update.

  I updated the software to version 5. something to 6.0.0.43 version.  Once the software has been updated, I get a prompt to upgrade the 9000 to a new version of software for device.  So I move from 4.6.something to 5.0.0.82 2.

  I do a couple of synchronization with the USB cable and I feel good.  Then I try to sync using bluetooth.  No joy.  Unable to get the desktop software to see the Blackberry.  The 9000 "BOLD" connects to Windows 7 OK and I can even use the laptop as a speaker.

  So I go through the "Add bluetooth device" menu and office procedures.  During the search of a device discoverable bluetooth, the 9000 "BOLD" is so I clicked and respond OK.  Then I went back to the Bluetooth Configuration screen where nothing appears.  I can't add the 9000 "BOLD" for Desktop software.  Something is not.

  Nothing is more exasperating to have everything to work perfectly, apply the updates recommended by the provider of the software, and then have things get broken and stop working.  Before after the Desktop software prompts to upgrade, I worked flawlessly.  After you apply the upgrade of Desktop software and device software upgrade, I can not connect with Bluetooth.

  I searched on the Internet until I no longer have to read in order to find a solution but can't seem to find a solution.  Maybe I'm just angry with RIM and these horrible upgrades that utility that I really liked.

  Let me answer a few questions before someone decides to help him.

  Is your BlackBerry detectable, so she can be found and associated with?  Yes, I updated the device discoverable.

  You can pair your BlackBerry with Windows 7 64 bit?  Yes.  No problem.  I can use the laptop running Windows 7 64 bit as a speaker with the BB.

  Could you have made other changes that may have caused the problem?  Nope.  I did not follow the guidelines of RIM in updgrading Desktop software and device software.  I suppose that, in this case, I followed the destruction of the RIM.

  You do backup your BlackBerry 9000 "BOLD" before upgrading the device software?  Yes.  I'm not stupid and don't trust any upgrade for the exact reasons, I'm writing on this forum.

  You have a Windows 7 restore set where you can go back to a point in time before you upgraded the Software Desktop 5 point. something to 6.0.0.43?  Yes.  I have a restore point.

  Do you have confidence that you can do both a restore of Windows 7 to get something back to 5. AND then to restore the device to 4.6.something?  Man, that thought makes me sick at heart.  I trust both RIM and MSFT to do their work and we know that RIM was screwed up, or I wouldn't be here today.

  Can anyone help with obtaining of BlackBerry Desktop Software 6.0.0.43 (updated 5.something) version to see and the pair with a BlackBerry 9000 "BOLD" which had 6.0.0.43 improve software 4.6.something to 5.0.0.82 device 2?

  It is confirmed.  5.0.0.82 2 is total c * p.  Who knows what complete insanity due to RIM out a such terrible and wounded many customers update.

  I was able to downgrade from 5.0.0.82 2 to 4.6.0.304.  Compatible bluetooth and connected seemlesly, even if the connection has been very sloew the order of minutes of time to the Desktop Manager.

  Here are the instructions to downgrade.

  1 remove the newer operating system of your PC by going to control panel > Add/Remove programs.

  2. next, download and install the earlier version of the operating system. BlackBerry operating system downloads

  Find here the operating systems:

  http://BlackBerryFAQ.com/index.php/BlackBerry_Operating_System_Downloads

  3. install the older operating system to the computer by running (double click) the downloaded file.

  4. go into c:\program files Research in motion\apploader and delete the file named "vendor.xml."

  (I had to look for vendor.xml as I have Windows 7, but when I found and deleted things work as described).

  5. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

  These instructions worked like a charm.  Connected to Desktop Manager and did a sync as soon as the 9000 "BOLD" restarted.  Apparently, the problem was my stupidly following the recommendation to upgrade the operating system to 5.0.0.82 2.

  ****************************************************************************************************

  I found these other topics in this forum.  A couple of them express my feelings.

  1. "BOLD" upgrade to the new OS 5.0 ATT, worked for six hours and now quite dead

  2 BOLD 9000 update

  3 bold 9000 problem after upgrade to 5.0

  4 KB24307
  It is a question has already been given that is reviewed by our development team. No resolution time is currently available.

  5. problem with 5.0.0.82 2

  Good comments in this thread!

  6. upgrade to 5.0.0.82 2 now no visual voicemail (ATT)
  Just another thing about the 5.0.0.82 2 upgrade... IT SUCKS DO NOT! The SMS is now garbage as it collects all text messages and combines a conversation and you cannot choose to delete or restart without deleting the text entering of this person and everything behind it. Until the Bugs are worked out stay away 5.0 versions (anything ending in par.822 and earlier) just my 2 cents worth

  7. problems with the new OS 2 and put 5.0.0.82 at level of the desktop software?

  Good comments in this thread!
  8 losing sound on 9000 "BOLD" after downloading the OS 5.0
  I suggest that you go to 4.6 this latest OS 5.0.0.82 2 is broken.  RIM has published a BONE broken to the unsuspecting public.

• Satellite A110-137: serial USB 1.1 Cable does not work

  My computer is Satellite A110-137 and the operating system is Windows XP Home Edition v 5.1 service pack 2. Language setting is the Finland.

  I have a prolific USB driver cable RS232 2.0.0.26 version 1.1.

  It does not at all. When I try to connect it to a package Kantronics KAM radio modem using Hyper Terminal there is an error COM3 message: ei voi games. Tarkista porttiasetukset. (COM3: cannot open.) Check the port settings).

  The settings that I have are 9600 bps, 8 data bits, zero parity, 1 stop bit, hardware flow conrol. It's the same thing in device driver settings and the settings of the Hyper Terminal. It is 100% sure that the problem is somehow related to Toshiba or Windows XP as the same USB converter RS232 perfectly works and right the first time with for example Fujitsu ErgoPro have Windows 2000 (and it's a machine Pentioum 233, very old stuff indeed).

  I can't get any help of Prolific, their home pages seem to be offline now.

  Hello

  I studied a little on the net and it seems that this converter RS232 USB 1.1 creates a virtual serial port (possibly the com 3)
  As far as I know the built-in modem is using the same port.
  Possibly there could be compatibility problems.

  However, this is not a product of Toshiba and this is why I would recommend contacting support of the prolific.
  I've been on the site and it of online.

• HELP WITH LINKSYS WUSB100 attached to the USB EXTENSION CABLE - does not work

  Hello team,

  I own a LINKSYS WUSB100 usb adapter I used for my wifes desktop... I can connect to my home network to surf the net, but the signal is weak...  I decided to buy a 25' EXTNESION USB CABLE, which comes with a MALE AND FEMALE ends... I simply PLUGGED the cable on my DESK and PLUG the other end of the USB cable from the LINKSYS WUSB100 card and waiting for the COMPUTER TO RECOGNIZE the card without any problems... To MY SURPRISE, the computer would not have hired the LINKSYS CARD... He said "the search for new deivce, peripheral found but not hired"(Something like that)... in any case the desktype sees the device, but willl not hired there as a LINKSYS and I cannot search FRO all networks... As soon as I unplug the LINKSYS of the cable and plug it into the USB port of the computer - BAM my network comes up with a weak signal... Can anyone understand this? My cable is too long?

  Thanks a lot for all inpiut!

  DOn

  dax0007 at hotmail

  There is a standard length for the cable. It will not work with 20 foot extension... Try the cable up to 3-4 feet short and check.

• Windows 8 audio via hdmi cable does not work on the desktop

  im running windows 8 on a desktop computer I plugged my TV I have the video works fine but my sound does not come through, and I don't have the option start normally with windows 7 and below so I do not know where to find the control panel. Anyone know how I can get it set up to run it. I go to a surround system from Panasonic connected to my TV through hdmi cables.

  Hello

  Thanks for the reply. I'm sorry to know that you are unable to see the high definition Audio Device and other options.

  1. What version of Windows are you using?
  2. What do you see under sound, video and game controllers?

  You can try the above steps through the steps below.

  Method 1

  1. press on Windows Logo key + X. Click on Device Manager.

  2. search for the sound, video and game controllers.

  3. under it, you will find high definition Audio Device.

  4 right-click on it, you will see turn off the option.

  5. click on disable.

  5. again right click on high definition Audio Device to activate.

  Method 2

  1. Press on Windows Logo key + X.  Click on Control Panel.
  2. Click hardware and sound.
  3. Double click on sound.
  4. Under the playback tab, you should see your HDMI device.
  5. Right-click on it and select set as default device.
  6. Click Ok.

  Hopefully now, you will be able to find these options. If the problem persists, get back to us. We will be happy to help you.

• Satellite A100: Crossover Cable does not work

  I have a laptop TOSIHBA SATELLITE A100
  I tried to connect my laptop to another computer by Cable Crossover
  and he wasn't wotking, the sign (X) appeared to me as if the cable was not plugged.

  Note that (when I put my cable DSL ' it works well on the net)
  to know that I tried this cable with the other compuers, and it worked fine.

  Hello

  Strange?  :|
  I think that it s certainly not a physical LAN port problem because as you have already said the ADSL cable works fine.

  You have the right settings TCP/IP to connect to the other computer?
  Both computers must be in the same workgroup. In addition, you must set the IP fix, the subnet mask and the gateway!

  Also, try to remove the map LAN device manager and restart the laptop.
  After the new reboot the OS must load the required drivers and should recognize the card even once.

  Good luck

• Satellite U - LAN cable does not work after bios update

  Hello

  I recently installed upgrading the Bios that was detected automatically, and it seems to work fine. However, my LAN cable no longer works to connect to the internet. When I try to diagnose the problem, I tells me that I need to make sure that the cable is connected, but I can assure you that the cable is well connected.

  The cable worked fine just before the update to the Bios and I know it is not a problem with the connection of the cable itself because my other laptop always connects very well with it.

  Please can you help.

  Thanks in advance.

  Hello

  have you tried to restore the default settings in the Bios?

• (Redirected) Microsoft M4000 without transceiver does not work on XPS 12 convertible

  Hello

  Hoping someone can help.

  I recently bought a Dell XPS 12 to replace a Dell Studio (Handed down for children) but wanted to keep the MS Wireless Mobile Mouse 4000.  I left the radio in the Studio and wanted to use the bluetooth in my XPS 12 to allow me to use her mouth on two laptops wireless.

  When I run discovery on the 12 XPS Bluetooth it does not detect the mouse.  I was hoping to use the bluetooth transceiver integrated of 12 theXPS... is this possible?

  Thanks in advance.

  Hi Samd_77,

  Please this post in the forum Networking, Internet and wireless for faster assistance.

  http://en.community.Dell.com/support-forums/network-Internet-wireless/

• I have a bluetooth hands-free, but it does not work with my laptop. How can I connect it?

  My laptop is Toshiba satellite L455D-S5976 with windows 7 Home premium 32-bit. Its display driver installation. You can the page where I can download the driver.

  [Moved from comments]

  Hi Sameer,

  1. What is the brand and model of the hands-free Bluetooth?

  2. what exactly happens when you try to connect the hands-free kit with the computer?

  3. have you installed the Bluetooth drivers on the computer?

  I suggest you follow the links that may help you solve your problem below.

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also:

  Add a Bluetooth device to your computer

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• Cannot send email - can receive, moved to AAFC of fla. worked in fla on cable does not work online telephone wva

  cannot send emails, but receive them WORKED LAST WEEK on FLORIDA CABLE NOT HERE in AAC ON PHONE LINE HELP

  We don't need your address, we need your e-mail program. Windows Mail? Windows Live Mail? Hotmail? etc.

  Please post any error message in its entirety. You can left click on it to highlight then right click to copy and then paste in this thread.

• help with without trial-does not work! Everything started and says expired!

  I recently created an account with adobe. I wanted to do the free trial for Illustrator. Tonight, I tried to download the program twice. He has reached 100%, and said trial arrived at expiration. I really don't understand!

  Trial mode expires prematurely
  ------------------------------

  http://helpx.Adobe.com/x-productkb/global/trial-software-expired-early.html

• Download Nikon D90 photos via a cable of Photos does not work. The picture freezes and does not matter. Any ideas?

  Download photos of Nikon D90 Photos OS El Capitan 10.11.16 cable does not work. The picture freezes and does not matter. Any ideas?

  Try with Capture of Image (in your applications folder)

  LN

• Helix Bluetooth does not work

  Hi all, I need help with my new Helix (3698 - 6CG)

  I have been using this machine for almost a month and bluetooth never even appeared in Windows. With all the drivers installed, BIOS updated to the latest version of Bluetooth does not work nor appeared already in the Device Manager.

  Bluetooth is enabled in the BIOS and the Bluetooth service in Windows Services but no change. Deactivation and reactivation in the BIOS (with several reboots) was also without success.

  I tried the official driver from Broadcom, also, but the pilot could not even detect my bluetooth device.

  Recently, I've upgraded to Windows 10 to see if it solves the problem but still no change. I installed the official driver of Lenovo Bluetooth. The installation was quick and successful, but still no bluetooth, after all.

  I think I've tried all the possible solutions, but there is still no Bluetooth in the Windows Device Manager.

  What could possibly do now?

  Thank you in advance!

  Thank you very much for your advice!

  I transformed my Helix in a partner of Lenovo service and found it was missing the Bluetooth device. The same problem.

  I had an agreement with the reatiler so they will order a corresponding with Lenovo Bluetooth module and install in my Helix free. Problem seems solved :-)