Satellite A110-137: serial USB 1.1 Cable does not work

Similar Questions

• Satellite A215 S4767 Chicony USB 2.0 camera does not work with Skype

  I have a Toshiba Satellite A215-S4767 with Vista Ultimate 32.
  I checked the drivers and they work, I have 10 Diretcx and it works.

  When I open the camera program, it works well.
  I put the camera program is not at initial start-up of laptop.
  I start the laptop, Skype open and figure that the camera does not work and say to check what I've done.

  Yesterday, I had installed the Skype 5.5.0.114 version and the camera has functioned well, I upgraded Skype version 5.5.0.117 and the camera started not to work.

  Hello

  > Yesterday I had installed version Skype 5.5.0.114 and the camera has functioned well, I upgraded Skype version 5.5.0.117 and the camera started not to work.

  This means that it is not software for laptop problem or a webcam, but maybe it s Skype related issue.
  You should check if the webcam has been chosen correctly in Skype video settings.

  If this does not work, uninstall the 5.5.0.117 version of the system, reboot the laptop, clean the registry using CCleaner (freeware tool) and then after reboot again to install the 5.5.0.117 again if not check the 5.5.0.114 a version that worked correctly in the past.

• Satellite A110 - after Vista upgrade media control button does not

  Hello, could someone help me?

  I upgraded my laptop Satellite A110 to Vista. Media button control does not work after upgrade to vista.

  Help, please...

  Hi guys

  You consider right. You must install the Vista Toshiba value added package.

  I found this TSB Toshiba

  TOSHIBA value added V1.0.25 for VISTA contains 3 different version. What is right for my cell phone? http://support.toshiba-tro.de/KB0/TSB7801XK0005R01.htm

  You must check your key for laptop specifications and then use the right file and drivers.

  Maybe this could be some help how to determine the amount of buttons on the right:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26254

  Best regards

• When I connect the USB and LAN cable does not my trackpad

  Hey guys how are you.

  When I connect the USB and LAN cable does not my trackpad

  How can I fix this error. Please teach me.

  Which macbook model do you have?

  a USB mouse still works?

  your keyboard still works?

  No matter which USB port you use?

  No matter what USB device allows you to create this error?

• 3 USB ports on 4 does not work on Satellite A660-12th

  Hi, I have a problem with my laptop french: 3 or 4 of my usb ports does not work.

  My laptop is a:
  Satellite A660-12th
  Reference: PSAW3E-02700GFR

  I almost tried everything:
  -reinstall all drivers
  -Uninstalling the root USB controller and restart the computer
  -Finally to format my laptop and clean reinstall.

  -3 ports still does not work and I do not know how to solve them.

  I bought an of 2 TB external HARD drive and its driver is installed but not recognized by the last working USB port. I really need to fix the other 3. Could you help me?

  Wait a moment have you tested all 3 USB ports only for external 2 TB HDD?
  How USB ports do not work if you connect a USB mouse or a USB flash memory stick?

  Page plug Toshiba says that this laptop supports 3 2.0 USB ports: 1 left, 2 right
  The one on the left is a port eSATA/USB 2.0 supporting sleep and fresh.

• Satellite 1900-803: Hi-Speed USB 2.0 card does not work

  I have a portable satellite 1900-803. I recently bought and installed a Belkin Hi-Speed USB 2.0 Notebook Card, but it does not work. Manual of the card says that after the successful installation, I'd see a second 'USB bus controllers' heading which I did not. I even it was replaced by another one thinking that there could be some problems with the drivers, but it still does not work. whenever I plug in a device such as an mp3 player, a digital camera or a usb storage device, windows locks all of a sudden upward, won't move the cursor, the function ctrl-alt-del does not work and the worst of it, I can't turn off the machine!

  the map shows that it runs on any 32-bit location.

  I have the manual and the Device Manager to see if mine is a 32-bit, but I don't really know. This is probably the reason why it doesn't work? or is there another reason to make it work not? If this is the reason why, is there a way where I can upgrade my laptop's pc card slot to make it work?

  Help, please.

  I posted this question yesterday morning and did not get a single response. is it because it has to do with an older laptop? Please, someone, help...

  Post edited by: wes0702

  Hello

  Have you checked the Bios? I guess that the Bios Toshiba was preinstalled on your laptop. Am I wrong? There should be an option to change the PC Card controller mode.

  Here, you can change the mode of the automatic selection, CCIP compatible controller or card bus/16-bit.
  If the card supports 32-bit so you should use the 16-bit option.

  I think you should play a little with this option and possibly that the card will work.

• Chicony USB 2.0 camera does not work on Satellite P205-s6267

  Please help me!
  I bought a toshiba satellite p205-s6267
  everything works but the built-in webcam does not work, I tried many links and read many forums and have not found a solution.
  I tried to install all the drivers and it does not work
  If someone can give me a good driver or software for this, please help
  Thank you

  Hello

  give me your hand, I'll help you ;)

  Here, my friend, the link of all links that will guide you to the resolution (I hope so :))):

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24169&MessageID=88745

  If it does then I really Don t know what...

  Welcome them

• Chicony usb 2. camera Webcam does not work in xp toshiba s300L

  My Webcam Chicony USB 2 does not work on Windows Live or Skype.  Video œuvres in a trial, but I cannot enable video calling. Computer is computer S300 laptop Toshiba Satellite - operating system Windows XP, IE 8.   Have tried everything... Suggestions appreciated.

  Hi Jojololo,

  ·         Did you do changes on the computer before the show?

  ·         What version of Windows Live Messenger?

  If you use Windows Live Messenger 2009, there are two main webcam / video configuration menus.

  a. start Windows Live Messenger and sign in.

  b. before connecting to anyone, open the menu "Tools" then click on "Configuration video / Audio»

  c. perform the tests and click on 'next' and confirm the webcam of video display, and then click "Finish."

  d. before connecting to anyone, open the menu 'Tools' and then click 'Options '.

  e. Select "Staff" and put a check mark next to "Webcam - enable others to see that I have a webcam".

  f. click 'Apply' and then click 'Ok '.

  g. sign out and EXIT Windows Live Messenger completely to save the new settings.

  If this does not work, I suggest you visit the following sites for help:

  Windows Live Support

  http://windowslivehelp.com/community/

  Skype support

  https://support.Skype.com/

  Hope this information helps.

• Lightning cable does not work well

  Its already 3 weeks I use iphone to. the cable of the lightning that was in the box does not work well. I need to pull up to my phone charged. How can I solve this problem.

  Clean the lint on the connector of the lightning on the phone with a toothpick.

• Bluetooth/Hotspot tethering without cable does not work

  Hello world

  We have a weird put in place where Bluetooth does not (entirely).

  iPhone is last 9.3.3

  OSX is 10.11.4

  Setting up Personal Hotspot on the iPhone and then connecting via Wi - Fi laptop does not work. Error message "Unable to connect" standard and suggestion of using Wi - Fi diagnostics (also does not help).

  Go to Bluetooth prefs on OSX and the connection it does not work. Matching does not work, but we CAN see the iPhone. The WiFi scanner captures also the iPhone.

  If connect us the iPhone via the cable and then put in place a personal Hotspot, it does not.

  Surfing on the web, everything works. Disconnect the cable, and it stops again.

  I succeeded in pairing my iPhone to the laptop, so it seems apparent to another iPhone. I'm leaving work via cable uses a direct route via the cable which is a different connection method than live bluetooth signal?

  We have removed the Bluetooth of OSX preferences > no change.

  Reset us the iOS network settings > no change.

  Any ideas?

  Best regards, F.

  Have you looked at these?

  Share your Internet connection with Personal Hotspot - Apple Support

  iOS: System requirements for Personal Hotspot - Apple Support

  Get help with Personal Hotspot iOS - Apple Support

  Barry

• Satellite Pro A120: my Ghost image created new does not work

  fokes, all the ideas that we are stuck and as normal phone support fate with a cracker of a response... "it seams Ghost is too recent." and unsupported. "

  have a master machine installed and the installer under windows xp pro and about 60 bits of software school, smartboard and network settings. preparation time was about 2 days, so don't want to do the other 11 manually...

  I took the image via the network and then sent to a new machine, and bingo, he sits on the bios screen, now enter the detailed checks so I can see what the bios checks the hard drive is fine and its just hanging somewhere on the wick between bios and where the hard drive takes over.

  OK test 2, take the hard drive of the machine master and make a ghost of disk to disk to a new machine, image ends fine, replace the hard drive in the machine, try to start new machine, bingo same problem lies just to the bios.

  After each test, the machine master fine boots.
  have you tried the main hard drive in two new machines, its fine
  have reinstalled xp pro cd on two hard drives, it must be installed fine
  running spinrite all 3 disks that are very well
  Ghost does not all problems with the master drive
  have tried a fixboot and fixmbr chkdsk on the new machines after they have been imaged, still no start

  This is the first time we had a problem with the ghosts of the machines of tosh in 7 years, (copied about 50 machines so far this year, as some of this model) just woundering if they changed something in the batch or the version of the bios?

  answers please as soon as possible, thank you very much
  Andy

  Hello

  I can't give you a precise answer why your new created Ghost image does not work, but I found this Toshiba useful knowledge base article

  Norton Ghost 8.0 BACK tool is not put on the road correctly if you try to make an image of your drive or partition.
  http://support.toshiba-tro.de/KB0/TSB5400Z20008R01.htm

  and

  Norton Ghost 8.0 or 8.2 BACK tool is not put up properly on machines with S - ATA if you try to make an image of your drive or partition
  http://support.toshiba-tro.de/KB0/TSB6801JL0006R01.htm

  Maybe your allowed some ghost image parameters that are not supported by satellite Pro A100 or missing some drivers SATA or IDE!

  It seems in any case, there is nothing wrong with the Toshiba laptop. All functions using the Toshiba Recovery CD. Created your new image is not 100% good!

• Satellite L650-12 q - recovery of Windows 7 does not work

  Hello

  I have Windows 7 Home Premium (64-bit) edition in my laptop Toshiba Satellite (L650-12 q) and after a new start the Windows stopped working. I have a recovery disk that does not load (I'm done with the pointer in a blank screen) and the drive to install windows 7 would not work either (same thing). Safe mode no longer works.

  This probably means that the partition has a problem I'm wrong? -J' used Ubuntu Live CD, which confirmed that c:\ cannot be mounted while d:\ can.

  The problem however is double: a) I'm not sure that aspect of my data is accessible or not (I can't check) and b) I can't reinstall Windows, as Windows 7 installation process does not work.

  Any ideas please on what to do next? I want to access the partition, have searched on the internet (even tried with a Windows 98/XP boot disk), but had no chance that the partition is written in a newer way, which is not detected by them...

  Thank you in advance.

  > I have a recovery disk that was not loaded (I'm done with the pointer in a blank screen)...
  Do you use it for the first time?

  In any case, try to start the recovery disk, follow these steps:
  -Launch the laptop model and when you see the Toshiba screen home press F12 repeatedly to enter the boot options
  -When the boot menu appears to place the recovery disc into the optical disc drive
  -in the menu choose the CD/DVD drive and press ENTER
  ODD must start recovery disc playback.

  What happens when you do this?

• Satellite L300D - installed XP and now my wifi does not work

  I spent from Vista to XP and now my wifi does not work. I was told that I don't have the drivers.
  Can someone help me? I have a Satellite L300D-01N. Please help me, I don't know much about this kind of stuff.

  Thank you

  You can download drivers Toshiba from here: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  There is however no driver XP for the L300D. But I found a LAN driver for XP wireless that would work.

  Select:
  Laptop
  Satellite Pro
  Satellite Pro L series
  Satellite Pro L300

  Download and install
  -Wireless Lan Driver Realtek Semiconductor Corporation Windows XP 6.1116.1226.2007

  If this does not work, you can have an Atheros Wireless LAN card. If this is the case, look at the other models for an Atheros Wireless LAN Driver XP.

• Satellite A100-499 - function for the WiFi button does not work

  Hello, I have a Toshiba Satellite A100 - 499 PSAA9E.

  I formatted my laptop and installed XP with SP3. I downloaded and installed the drivers (in the right order) for this OS of the toshiba - Europe.com and everything is going well except Fn + F8. It is assumed that this combination has toggle Wifi & Bluetooth. When I switch side 'off' position and I press the keys, appears a message saying that I should switch to position 'on' but when I switch lateral position 'on' and I press Fn + F8 it does nothing.

  If I want to disable the wi - fi I have to do it with other methods: the function key does not work correctly.

  Any clue?
  Thanks for the advice (and sorry for my English).

  When the WLAN switch is on orange LED is also on?
  You can scan area available networks?
  Have you tried to use the WLAN without using FN + F8?

• Satellite L30 PSL33E: Link to the energy saver does not work

  Problem: someone can help me find, this driver download

  Power Saver link does not work when I want to download the driver (WIN XP).

  http://support.toshiba-tro.de/tools/satellite/SL30/XP/TPS/pwrsav-psl30e-XP-70307q-en.zip

  Hmm, are you 100% sure?  :|

  I checked the link and it works for sure!
  Check again