Monitor does not immediately turn on

Similar Questions

• F1503 - led blue monitor does not power available. Unable to turn

  Hello

  I had my f1503 monitor into storage for a while and it finally worked its use. Properly connected all power and PC connections and changed the tension but no blue led light work and impossible to turn on the monitor. Checked the power adapter - green led on the power and 12,33 volts transformer showed at the end of the output of the power supply monitor.  The monitor plug was inserted into the grip. Help, please?

  That the monitor has a fuse that needs to be replaced?

  Hello Bruce123456,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having problems when your flat screen HP Pavilion f1503 monitor does not come. The problem you describe seems to be a physical problem, and I think it would be better if you contact HP Support for service options.

  I want to thank you for display on the HP Forums. Have a great day!

• HP monitor does not display "DVi signal.

  My HP LP2275w monitor does not display "DVI signal" when connected with a DVI cable (supplied), but when it is connected via a VGA cable and adapter DVI/VGA (both supplied) it works but no BIOS screen. It begins immediately with the logo of the VICTORY.

  I just bought new HP Pavilion 500-158eg, Intel Core i5-4440, with AMD Radeon HD8570, 2GB processor, running on WIN7 Pro 64 b. VGA and another port of the motherboard are initially blocked so I can connect the monitor only via the output HDMI or DVI on the graphics card.

  I should note that on my old machine without a name with the graphic upgrade ATI Radeon, there is no problem and I used the same cable. There was an electric shock that causes the collapse of the motherboard so I can't even re - check on the old machine. I can't verify if there is a problem with the DVI cable because all laptops in our housing have only the VGA output...

  All solutions?

  Concerning

  Disco96, welcome to the forum.

  The specifications for the computer show that they run win 8 64-bit.  Downgrade you for Win 7?

  Here's what the quick reference Guide shows for the monitor:

  Model: (LP2275w) product #: video (KE289A4) standard: (WSXGA +) Native resolution: Aspect ratio (1680 x 1050): (16:10) types of connectors: (DVI - I, (support HDCP) DP) cable/s included: (DVI - D to DVI - D, DVI - I VGA, DP USB,)

  Also, here are the i/o ports of back on the computer:

  Figure 2: Rear i/o ports

• Primary monitor does not work after last nights updated

  • I'm running Ultimate.
  • I have two monitors.
  • My primary monitor does not work.
  • I checked the VGA cables. This isn't the issue.
  • Edit: Just realized that my main monitor is a monitor "Westinghouse". -Who is a "Plug-in-and-play" monitor, there are no drivers.
  • Reinstalled the ATI drivers, did nothing.
  • SYSTEM RESTORED, still nothing.

  I ran the most recent update for final last night, then fell asleep. Everything worked before that date, but when I went to turn on my computer this morning, only my HP [my second monitor.] w17e worked. He said he was installing updates from last night, so I had no problem with him and thought it might show something once like this on the login screen.

  Once that has happened to the login screen, it showed it for a fraction of a second before disappearing. I entered my password and it connected as usual. After login, I turned off my monitor, and then back on, and it showed my normal desktop for a moment, [enough for me to close two-three programs] before she returned empty.

  Hello
   
  I recommend you to update the graphics drivers and see if it makes a difference. You must be logged on as administrator to perform these steps.
   
  1. open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in Device Manager, locate the graphics card and then double-click the device name.
  3. click Driver tab, then click on set to update driver and follow the instructions.

  Now, try to follow the link provided to update a hardware driver that is not working properly and check the question below.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I also suggest that you please check how to set up two monitors and frequently asked questions on how to set up multiple monitors in Windows 7 from Microsoft mentioned below, items

  ·    Setting up dual monitor is easy in Windows 7 http://support.microsoft.com/kb/976064
   
  ·    Multiple monitors: frequently asked questions http://windows.microsoft.com/en-US/windows-vista/Multiple-monitors-frequently-asked-questions
   
   
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Monitor does not work after windows update failed

  After the recent updates on my computer Vista installation seemed stuck to update 2. I pressed the off button and he turned his back and now my monitor does not display anything, he spends just the analog to the digital looking for a signal. I tried the computer to another monitor with different tracks and it's the same thing. Can anyone help?

  Starting in recovery system (from the Vista DVD) options and do a startup repair.

  Startup Repair is a Windows Recovery tool that can fix certain system problems that might be preventing Windows to start. Startup Repair scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair is a recovery tools in the System Recovery Options menu. This set of tools is on your computer's hard disk and on the Windows installation disc.

  Reference: http://windows.microsoft.com/en-us/windows7/Startup-Repair-frequently-asked-questions

  If the startup repair does not resolve the problem, try other system recovery options:

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7 Man is the only animal that laughs and cries; because it is the only animal that is struck by the difference between what things are and what they could be.

• Dell monitor does not stay on

  * original title - my monitor does not work *.

  OK so I bought this computer about 4 years ago and it worked just fine until when I tried to turn it on this morning it does not turn on. Then I tried again and it was the case, then half an hour later he died. After that, I tried to put it on the back again but this time, when I press the button it lights but when I let go of it, it turns off the coast. I tried unpluging but it does the same thing.

  My Dell flat screen monitor

  The computer does not work

  Also I umpluged computer from the monitor and the same thing happened

  Help, please

  Hi Uther 9,.

  If the monitor does not remain during the self test, it is defective.

  * Turn off the monitor
  * Remove all cables from the computer monitor
  * Turn on the monitor
  * The floating red/green/blue/white dialog box should appear on-screen on a black background and stay on

  However, it seems that you already have, is most likely a hardware problem:

  http://support.Dell.com/

  Thanks and good luck!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Reliability Monitor does not work in Win7 Ultimate

  Can someone shed light on why the reliability monitor does not work in Windows 7 Ultimate? Apparently, it has not operated since I installed the operating system on a dual boot w/Vista system as nothing recorded, nor any indication that current operations record is!
  I don't remember having a problem with the tools of Perf and Rel in Vista and performance monitor seems to work in Win7?
  I already read the thread on this issue which was published in January 2009.
  Any suggestions welcome!
  Thank you

  Hi dw_witless,

  Thanks for posting on Microsoft Answers!

  I suspect that data collection is not enabled. To follow the steps below to enable it:
  1 activate the data collection for reliability monitor
  Reliability Monitor uses data provided by the RACAgent scheduled task. Reliability Monitor will begin showing an indication of stability, and event information specific 24 hours after installation of the system.
  The RACAgent scheduled task runs by default once the operating system is installed. If it is disabled, it must be enabled manually in the software component for Microsoft Management Console (MMC) snap-in Task Scheduler.
  Membership in the local Administrators group or equivalent is the minimum required to complete this procedure.
  To enable the RACAgent scheduled task
  1. Click Start, click in the search box, type taskschd.msc, and then press ENTER.
  2. in the navigation pane, expand Task Scheduler Library, expand Microsoft, expand Windows, and click RAC.
  3 right-click RAC, click view, and click Show hidden tasks.
  4. click on RACAgent in the results pane.
  noteNote
  The RACAgent task name is maybe not completely visible. If you don't find it, expand the name column in the results pane.
  5. in the Action menu, click Activate.

  If the steps above does not
  2 reset the reliability monitor:
  1. turn off your Windows 7 problem report history.
  NOTE: You need to do step 6 at this link above to delete all the problems.
  2. If the Reliablity monitor is open, close it.
  3. open the Folder Options and select (dot) the hidden files and folders option, and click OK.
  4. open Windows Explorer and navigate to C:\ProgramData\Microsoft\RAC.
  5. to save the history of reliability data-
  WARNING: This is an optional step, you will not be able to restore these data if you do not back up this data and it will be gone for good. If you want to ignore this, go to step 6 instead.
  (A) copy the PublishedData and the StateData files and paste them to another backup location.
  6 open the folder PublishedData.
  7. Select all files in the folder and click on delete.
  8. click on Yes to approve it.
  9 open the StateData.
  10. Select all files in the folder and click on Delete
  11. click on Yes to approve it.
  12. If prompted by UAC, then you will need to click Yes to each UAC prompt for each file in the folder StateData approve deleting each file one by one.
  13. close Windows Explorer.
  14 emptying the trash.
  15 open the Options folder and select (dot) the do not show hidden files and folders option and then click OK.
  16 open the Reliablity monitor to see it reset now own.
  NOTE: If Reliablity monitor is already open, close and reopen.

  For additional help, you can also check out the article below which explains more on reliability monitor:
  http://TechNet.Microsoft.com/en-us/library/dd744567%28WS.10%29.aspx

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Envy laptop monitor does not light

  Just bought this HP Envy with Windows 8 just over a month ago.

  Today, after the installation of an HP recommended that Windows Update the monitor does not light.  The power led is on the internet led is activated and the CAP turns on if you press.  Still no monitor.

  Bought it at best buy and it's a drive of 1 1/2 at this store if I have to take it to Geek Squad

  If you have windows 8.1 on it then it looks like the update of kb2903939 killed. I fight with this problem since Christmas.

  Power cycle the cell several times without leaving start completely. It should bring up a screen of recovery. If you can find the path to start safe mode, you can uninstall kb2903939 and then restart. That fixed my problem.

  Otherwise, it should be a call to HP or Microsoft support.

• Why Thunderbird does not immediately

  Frequently, Thunderbird does not immediately and displays diagnostic tests, "Thunderbird on the response." It then displays the symbol of waiting (error in circle). He doesn't, but sometimes this happens with each key stroke. I'm about to give up Thunderbird and just use the Google interface for mail.

  https://wiki.Mozilla.org/Thunderbird: test: Antivirus_Related_Performance_Issues #McAfee

• Firefox has only display problems in the upper left region of only my Dell U3011 monitor; the monitor does not have these problems with any other application

  Some parts of the Firefox window are translucent, allowing the image of the desktop to show through. These regions are anything but great internet site central image which behaves normally. Unless the desktop is completely black this problem makes reading the tabs, address bar and the bookmark are difficult if not impossible. I encounter this problem only on my new Dell U3011 monitor. Firefox is the only application that has this issue on the Dell monitor. The monitor built into the laptop that animates the Dell monitor does not exhibit this problem. The laptop is a Lenovo W540 running Windows 7 64-bit. Thank you very much for your help. Steve Schupbach

  Hello stevesch

  first see : problem with Firefox going transparent troubleshoot and find a solution

  then with patience to see:

  questions/940393

  questions/940389

  questions/940374

  questions/940377

  questions/940384

  questions/940395

  Thank you

• Printer does not immediately appear under device & printers on Windows Server 2012 R2 VM. Printers appears after 15-20 min or more.

  Hi team,

  I have a question where adding a network printer is successful. I can see the printer in the Device Manager and I can print as well. However, it does not immediately appear under devices and printers and takes a long time to appear. Can someone help me please as soon as possible?

  Thank you

  Anand N V

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• PC health check-up according to my monitor does not have the minimum required display settings and change the DPI by default survey

  Original title: DPIdefsault level

  I am trying to install a pc health check-up for my laptop but it says my monitor does not have the minimum required display settings and change the default DPI level.  How do I do that?

  What version of Windows?  You can change the DPI on Windows XP but right click on your desktop, choose Properties, selecting the tab settings, clicking on advanced and change the dropdown to DPI.  Other versions of Windows have similar steps.

• my monitor does not automatically open on a startup computer or after sleep.

  MY MONITOR DOES NOT OPEN AUTOMATICALLY ON A BOOT UP OR AFTER SLEEP.  I HAVE TO CLOSE THE MARKET TO DO WORK. HE DID THIS FOR A FEW WEEKS.  THIS IS AN OLD 20 "AL2017 MONITOR.  JAKE

  We suggest to contact technical support in your region for further assistance in this matter.
  Acer Service & support

• Outlook Express 6.0 when I send an email, it seems that it does not completely turn off but it does and everytime I open OE, it turns off again and again and again, etc. Any ideas? Thank you

  I send an email, it does not completely turn off. A message that says that the task had not been completed, but no error message appears. The email goes off, and whenever I open OE it turns off again and again and again, etc. Any suggestions?

  Thank you

  You have the apparent corruption of dbx files, but an easy solution.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• Powers of laptop on but the screen (monitor) does not work.

  I have a HP compaq laptop 6720 (vista home basic, 1 GB of ram, intelcore,...)

  Powers of laptop on and all lights are working, but monitor does not work.
  Nothing on the screen, looks like no electricity on the screen or any contact of motherboard.
  Need your help,

  Kind regards.

  Hello

  If you don't see anything on the screen when you start, and this includes see the HP Logo, it would seem that it's a hardware problem.

  Contact HP Service or a good repair shop.

  See you soon.