Monitor shows lines and different reasons when starting

Similar Questions

• Pavilion dv9535nr - monitor shows lines with different colors, and then turns into blackout curtains

  I have a strong desire to help my father who is a sailor searching for an answer regarding his problem with his laptop.  His laptop is very important to him, because he uses this fact to his work, particularly in the preparation of reports and other kinds of things. They do not have Internet connection that's why I'm the one who send right now for this message.

  The problem is that the laptop has no display after having turned it on, it just show a few colored lines, and then after a while, the monitor is totally blackout curtains.  My father tried to use his laptop, even if it does not display, he provided his password and had pressed enter and heard the sound of the operating system. The sound he heard was similar to the sound at the start of the BONE.  He even tried to close the session blindly and he could again hear the sound you hear when you connect on a Vista operating system.

  I would like to ask if the problem is on the LCD screen, video card or even with the software? If it's a hardware problem, could you tell if my father could buy the piece of hardware he'd be able to fix his laptop?

  If you have ideas to share, I'd be very happy.  Thank you in advance.

  OK, I'll post my message here.  Thanks for the tips! Have a great day!

• InDesign crashes for long periods: Activity Monitor shows CEPHtmlEngine and launchd "not responding" in these crashes

  I use a MacBook Pro, latest OSX, last InDesign CC and in the last week or so I knew some crashes that last a few seconds, some lasting a few minutes and a few I completely outside of the force. Tonight, I started to look at the activity monitor utility in these crashes and see a process called CEPHtmlEngine, which is the parent process InDesign CC. This shows that red / is no answer when InDesign does. Makes sense. It is the only process hanging in addition to InDesign.

  Anyone know what this is and if there is anything I can do to fix things? I'm placing a screengrab below InDesign and CEPHtmlEngine activity monitor window. They are not suspended for the moment, but it shows 27 recent crashes - in case it helps anyone.

  

  Things I've tried:

  -restart

  -rampage of indesign preferences

  Here's what happened after I did these two things:

  A blockage on the Welcome screen (beachball was there with the grey/blue square preloader, but the beachball is a like a vampire for the screenshots and does not)

  

  And here's what looked like the activity monitor.

  

  And to add to the mystery, now that I keep looking at the activity monitor, launchd (1) is also a process does not not during crashes. This seems independent of the issue of CEPHtmlEngine, at least in the activity monitor shows me. And he has 71 blocks these compared to the 27 of CEPHtml or so.

  

  Thanks in advance for your ideas!

  Post an update in the case where this help someone else. The problem is apparently solved. Here's how:

  I ended up running Disk Warrior and got a report of pg 54 worth of irreparable errors. 50 of these pages have been because Universal Type Client of the Extensis Office so that I could access their fonts so I installed freelance. ~ 500 files had given resource that is proven to be damaged. I decided to uninstall using instructions and a Terminal here script

  http://www.Extensis.com/support/knowledge-base/uninstalling-universal-type-client-on-Mac-o s-x.

  I had to change the default security preferences to enable.

  then indesign wouldn't launch because extensis (parent utc) has a plug in called FMCore that indesign necessary at the launch - universal type of thinking was always there (indesign didn't know it was uninstalled). and by clicking on a button to ok the missing extension does not work. There was not clickable.

  

  Then, I uninstalled indesign and reinstalled, trashed prefs, I met the same problem of FMCore.

  It turns out that the uninstall/reinstall indesign was not necessary. I searched my computer for plugins to extensis, trashed all the (they were in my folders app pshop to indesign, illustrator). After that I've trashed those, indesign finally launched with no crashes and seems spry and nimble again.

  just to be sure that all the pain was gone, I reused diskwarrior and am coming especially clean.

• Crash of Vista, graphic error, green lines and broken at the start lines.

  OK, maybe complicated I don't know.

  Occasional at startup, my screen will be covered in white or green lines and will prevent windows to start so I have to manually turn my pc and turn it on again.

  At first, it was just a problem visually but now its my PC randomly crash. The dotted green line will suddenly appear all over screen of, freeze my PC and I have to restart again.

  It's random, it is not the case whenever I turn on the PC but when it does it is a pain.

  Any information you can give me would be great

  Here is a picture to help identify what I will speak about.

  http://uploadpic.org/view-PIC.php?IMG=93670

  See you soon

  Hello, daz18

  This seems to be either a driver, or more likely a hardware problem. Errors that distort the screen you describe is extremely rare with only software.

  Check with the manufacturer and make sure that you have the latest video drivers for your computer.

  Try to run the memory diagnostics tool: click Start, type memory in the search box and open the Diagnostic tool memory and choose whether you want to restart now or later. After the restart of the tool must be running and then windows starts to tell whether or not it finds problems.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The logon process failed to show safety and connection options when ctrl alt delete is pressed.

  Original title: nothing just won't even ctrl alt del

  When I start my laptop, windows 7, I think that 64 - bit and it starts normally but after a second, I can't click anything on my taskbar and I can click on the Start button but nothing in it. I can't right click on the toolbar to start the Task Manager or press ctrl shift esc. When I press ctrl alt del, it will take a few seconds to load then the screen will go black and say that the logon process failed disppay of safety and connection options when ctrl alt delete is pressed. When I click on one of the icons on my desktop, there was the circle of rotation as if his tent but then going to give up. The problem started a few days ago and I did a system restore to 2 days before it happened and it changed nothing. I have avast and found no virus and I had a legitimate registry cleaner/Fixer and ran both in safe mode and found about 360 registry errors and starts normally again and the same problem persists. If you need more information to help me I will give it to you.

  Hi Sheriff.

  Thanks for posting your question in the Microsoft Community.

  As you have tired almost all the possible troubleshooting steps and the issue can be generated if there is a corrupted user account.

  . Did you recent hardware or software changes to your computer before the show?

  I suggest you to check the question in the new user account.

  Follow the steps in the link.

  Create a user account:

  http://Windows.Microsoft.com/en-in/Windows7/create-a-user-account

  If everything works well in the new user account, then I suggest you to transfer data and settings to the fixed aid corrupt the link profile.

  Fix a corrupted user profile:

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I also suggest you to check the error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. click Start.
  b b.. in the search box, type eventvwr.msc and press enter.
  c. click the Application in the observer of events (local).
  d. Locate the event log on the right side of the event viewer window.

  Reference:

   

  Open Event Viewer:

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)? :

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

   

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• In iMac Activity Monitor, Disk Monitor shows 26 son of Firefox, when 2 are open. Why?

  Is it normal that my iMac Activity Monitor to view 26 Firefox threads when I only have one tab open? Should I worry about this?

  Probably, you are referring to the process of Firefox.
  
  Each process can threads within a process to perform specific tasks in parallel, see multiple threads in a specific active process is quite normal.
  
  Only one thread can be active at the time and the other waiting to be taken up (allocation at the time).

• Cc14 Photoshop and lightroom installed and works, but when starting the creative program cloud says: no program installed, mand shows that old programs like SP6 to install

  Hello!

  When I start the creative cloud, information that any programs not installed and I can download SP6. But I installed the latest versions of photoshop and lightroom works correctly.

  My system is windows 7 64 Bit PC.

  I had to uninstall the program creative cloud because he didn t react a few days ago. Then I installed again and now I have this wrong behavior.

  Does anyone know how to tailor the program creative cloud correctly?

  Thanks in advance

  Andreas

  Make sure that you had not changed the language on creative cloud desktop

  Also try to perform steps below

  On the desktop creative cloud on the right side click gear icon and exit Creative Cloud App

  Then right-click on the creative cloud desktop shortcut and choose Properties.

  Then click on the Compatibility tab

  In compatibility mode ' ' make sure that ' run this program in compatibility mode for "check-box is disabled."

  If it is checked, uncheck it and click on apply, Ok. Then launch Creative Cloud application and try.

• The monitor shows red and green lines

  my laptop is to jump up and down with green and red lines through it

  original title: my screen jumps up and down and has green and red lines through it

  It is normally a sign of a graphics issue.

  Download the latest graphic drivers:

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  If the problem persists on board graphic Hardwarre could be at fault.

  Contact the manufacturer of the laptop computer,

  See you soon.

  Mick Murphy - Microsoft partner

• Windows resource monitor shows only a CPU core when he should have four.

  Windows 7 Home Premium 64-bit, SP1
  Intel Core i3 2330 m-hyperthreading

  Resource monitor normally indicates two nuclei and Hyperthreaded (a total of four graphs) when seen on the tab CPU recently single core (one graph) is displayed. This change is caused by one of the updates of Windows or an indicator of a hardware problem? Is there a recommended KB or a patch that solves it?

  original title: change of resource monitor (?)

  You asked: "what version of Windows 7 do you have?" ... Home Premium x 64, SP1 as indicated at the beginning of my first post.

  As my screen name, incurably curious, says I couldn't let it go. Assistance in the meantime, I searched tirelessly and found a cure. I had to make a change through msconfig. I don't have any idea how the settings have been changed because no one else is using this machine.  [????] (Microsoft Security Essentials and Malwarebytes returns own scans; so I doubt that the cause is associated malware.) The following explains what I've done and the results.

  1. I went into msconfig > startup > advanced options and find the number of processors, set one. The arrow to expand a menu drop-down has also shown that a single processor. Which did not make sense because my processor Intel Core i3 2330 M's two core with hyperthreading.
  2. I unchecked the box and restart the computer.
  3. I returned the number of processors as described in #1 above. Expand the menu gave me the choice of 1, 2, 3 or 4 processors. I chose two and checked the box.
  4. I rebooted the computer again.
  5. I checked the monitor of resources (via the Task Manager) and found multiple graphics, I'm used to the display. The graphics are labeled: Service use of the CPU, CPU 0, 1 parked CPU 2 CPU and CPU3 parked.
  6. Parked CPU1 and CPU3 parked show no activity, which is expected. These show only activity when hyperthreading is active, which is rare with the programs I run. Only programs written specifically to hyperthreading use the feature.
  7. CPU utilization service CPU2 and CPU0 show activity as expected.
  8. Manager tasks shows four graphs still now.

  The reason why I know not what to expect is that I have upgraded RAM and completed cooling there are a few months and one of my tools use resource monitor to control the computer. (I used other means to monitor the internal temperature). I managed to run enough programs to use more than 7 GB, the 8 GB available RAM and CPU usage Dungeon in the range of 75 to 100% for more than an hour during trials. Hyperthreading (CPU1 and CPU3) clearly indicated to be active too. Time CPU ran in the range 165F without additional cooling and order of 125-130 with additional cooling.

  I will wait for return of the answers with explanations and/or questions until I got this mark as resolved.

• Satellite L675: characters show twice and delay keypad when typing

  For some reason, there always seem to be a delay seconds on the keys of the keyboard, including the numeric keypad. Several times, has been ignored, a character or the character appeared twice.
  Vey frustrasting that I always come back to add or delete a character.

  When I run a program of word in safe mode, it works fine. Someone told me that it may be a software problem that the problem does not occur in safe mode.
  I'm very careful with the laptop that I don't know that there is no release.

  Any feedback is greatly appreciated.

  Thank you.

  Hello

  Try a BIOS update.
  I read here in the forum that this solves the problem of keyboard similar to yours.

  Welcome them

• User ID and incorrect password when starting

  I recently upgraded to windows 7 Home premium. I have two users set up accounts and one is the administrator.i a password set in place for each of them. every time I start my computer or it is restarted, instead of the login screen come up it says username and password incorrect. It does this every time. It of like she tries to log on automatically or something. I have no idea. Also, he did this on my previous version of windows vista. I searched and searched for a solution to the problem, but I could not solve the problem. IM lost on how to fix this. anyone has any info to help me? I can give more information if necessary. Thank you

  Press the Windows key + R , type control userpasswords2 in the box and click OK .  Put a check mark in the box, users must enter a user name , and then click OK.

• I have an acer 2006 copyright edition 32 bit operating system computer and each update since 2007 has no im always getting error code 8000fff and different numbers that start with Ko failed

  Windows update error codes kb937287 kb960714

  each update since 2007 has no...

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair (upgrade AKA on-site) installation will fix it!

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My control panel shows only one user, but when I start it shows two users on the logon screen. and I know no other password

  My control panel shows only one user, but when I start it shows two users on the logon screen. My user is an administrator. But I do not know password of another user. I am currently using as an administrator. But I also want other user password. Answer please

  Your machine has only two accounts: admin and guest. I saw a few messages before which the poster makes an additional account on the log on screen that does not exist. Since there is not, it cannot be used.

  Also note that you play a game at high risk, having only one administrator account. This forum deals daily with posters including one and only the admin account went bad for one reason or other. Something about it now while you can: create, test, and document a spare, even admin account that you have a spare emergency House key.

• Had a recent fall and rebuild and don't get 'My recent Documents' show more when 'Start' is clicked.

  Original title: my recent Documents

  Had a recent fall and rebuild and don't get 'My recent Documents' show more when 'Start' is clicked.

  Floowed instructions in 'HELP' to customize, Advanced and list but do not work.

  Help please.

  Thank you

  Bill

  Hi Bill,

  ·         What version of Windows XP you are using?

  If you are using XP Professional, follow these steps.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link.  http://support.Microsoft.com/kb/322756

  Step 1: Follow these steps:

  (a) click on Start and then run.

  (b) type gpedit.msc in the run box and press on enter.

  (c) in the Group Policy Editor, navigate to:

  User configuration > administrative templates > Start Menu and taskbar

  (d) double click on menu to delete Documents from the Start Menu.

  (e) select not configured.

  Step 2: Follow these steps:

  (a) click on Start then on Run.

  (b) type regedit.exe in the Run dialog box, and then press ENTER.

  (c) access: HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer

  (d) right-click NoRecentDocsMenu to select change.

  (e) change the value to 0.

  (f) access: HKLM\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer

  (g) right click NoRecentDocsMenu to select change.

  (h) change the value to 0.

  (i) leave the registry (Regedit.exe) editor.

• The slide show feature does not work when I used my Apple TV new 4th gen. I have all the minimum requirements for Macbook and Macbook OSX the Airport express. The slide show starts and stops after that 7 photos are displayed on the TV. If I change the

  The slide show feature does not work when I used my Macbook with new Apple TV 4th gen. The slide show stops after that display 7 photos and display to select the options for the slide show is displayed on the screen. The selected interval was 5 seconds. If the interval is spent in 3 seconds the slide show would work for a time and then to display random images. Has worked with Apple on this issue Support Mike and he managed to reproduce the problem. Since I'm in the return period of 14 days for this product, I returned it to the Apple store

  Welcome to the Apple community.

  After returning, I'm not really clear on what your question.