Monitoring the application

Similar Questions

• change which monitor the application appears on when it opens

  A single application appears on the secondary monitor when it opens. As long as my laptop is docked, it is ok, because I can move it from one to the other. But when she is not locked, and I opened this request, it's like he's still stuck on the secondary monitor - can I use Alt - tab to switch to this app, but I can't, I can't move it, even with keyboard shortcuts (Alt-space-M for move, Alt-space-X to enlarge full screen, Alt-space-R to reduce full-screen Alt-space-N to reduce in the taskbar. All seem to work - it's flashing the task bar if I have the minimize, flashes back - in the sense that the secondary monitor is if it was docked - when I Alt - tab him - except that Alt-space-M don't move it on the laptop screen. Naturally, I can click on it in the tasks, but who was just the same effect as Alt-tab - I still don't see it.) V annoying!

  Try these:
  1. a click right a free space of the desktop, select "Properties".
  2. click on the tab "settings".
  3. click on the mouse on the seconary Graphic screen.
  4 UNCHECK "extend my Windows desktop on this monitor.
  5. click on the chart of the main monitor
  6. make sure that "use this device as the primary monitor" is CHECKED

  If you don't know who's 1 and 2, press "identify". It should display a huge and gigantic '1' on the primary monitor.

  Or if it does not, right-click on the application in the taskbar, click on move, then use the arrow keys to move the program. The mouse cursor hangs in the window of the program and you can use the mouse to place the program on your screen, simply use the arrow keys at the start.

  I hope I could help

• How to monitor the application connects to the journal on the unit or using slog2info w view

  I'm debugging on the device (purchased at Bell, runing 10.0.9.2372) production with the latest version of the SDK (SDK native 10.0.9.2372). I can't monitor connects using the View Log or slog2info w command described here: http://developer.blackberry.com/cascades/documentation/getting_started/tools/debugging.html

  I use QNX Momentics IDE. After you add the view "Journal of the unit", "All" is the only option in "BufferSet" and "Buffer" menu drop-down, and no newspaper appears after starting my application. The status shows "Listening target ' 169.254.0.1", pending the first event... ». Are there any additional installation required to monitor logs in this view?

  I have also tried running a SSH session and used the command 'slog2info w '. The command works on Simulator (Dev Alpha 10.0.10.263), but it returns immediately without any output on my device. The 'slog2info' command works, but it only dumps the log. I need to monitor the output log while I am debugging it. Do I have to activate what anyone on the device to make the command 'slog2info w' work, or I did something wrong here?

  Thank you

  You are following this with a devmode running app, right? In other words, not one signed?

  This has worked for you before, or is this the first attempt?

  Some few people have seen 'slog2info w' stop posting any output. A reboot or two (of the aircraft) usually "fixed."

• Monitor the application Oracle DB connection

  The Oracle cartridge can monitor the connection of the application of Oracle DB connection on each server?

  How is that possible?

  Depending on the type of applicatino, there may be a way to monitor this side application.

  You are running a server to something that exposes this information using JMX or Java applications? You run this with application .NET or something that can be exposed using WMI?

  Are the connections mapped on the process that we have?

  Golan

• Y at - it somewhere I can find a list of items that is supposed to be running in activity monitor and those that should raise red flags?  I know the list varies depending on the applications and installed process but a base line would be nice

  Y at - it somewhere that I can find a list of explanations or definitions of applications that are running in the monitor of activity as well as a list of items that should raise red flags?  I realize account from the list will vary depending on the applications and programs installed and running, but it would be nice to have a base line of what should be expected and considered safe or normal.  There are too many items to research and one at a time.

  No, not so much.

  You have a problem you're trying to solve?

• Open the application help in the specified monitor

  Hi all

  I work in a project that requires multiple monitors, each showing a different VI. Each of these screws has a 'Help' button that will open the help file compiled from the location mentioned in the hard drive. Now, I would like to open this help in the specified monitor. Suppose that if the user clicks on 'Help' in the second monitor, I would want this window to open it in the second monitor. Any suggestion on how to achieve this?

  Thanks in advance,

  Luxama

  Thanks Shivam Awasthi and Germain. By help, I mean the help files compiled with extensions *.hlp or *. chm. I use 'online Help Control' VI under range of dialogue & User Interface to open the help file. But it is still open in the monitor by default/primary. I would like to open in the monitor specified programmatically. I should be able to open it in according to watch her the user tries to access them from.

  Now I have the solution since the last post in this thread. I used the 'restore the window' and 'Move the window' live in the attachment to move the application window to another monitor by specifying limits entry.

  Thanks again.

  Luxama

• conditionally quickly monitor the key based on LabVIEW being the application of the update in Windows

  Hi all

  I use LV 2009 in Vista.  I use a VI dynamic, in addition to higher level, to monitor the key pad.  It works great except for the fact that when I have another application open during the execution of the LabVIEW application, it still meets the press of button.  that is so that the use of the calculator and pressing the ESC key to clear the display, LabVIEW reacts as well.

  LabVIEW will know if it is the "application of the update" in windows environment?  I know he can tell it is windows that are in front, but what about other applications?  I think to use this to filter keys when LV is not the front application.

  Thank you!

  Charlie

  This is the vi registered under a vi 2009

• Losing the application window in the passage of several single screen monitors.

  I'm having a problem in windows 7 on my laptop when I spent several monitor to work to a single monitor at home because I was running spread on 2 monitors applications seem to leave orders I had open on the second monitor not visible when I switch to the single monitor at home and reopen the app. Is there a function I need to run to get these missing controls reappear on the single monitor.

  If you move the application to the main screen window before closing, it opens on the main screen next time.

  If the application window is on the wrong monitor, you can move:

  1. place the mouse on the icon of the application in the task bar, so that the preview of the window appears above it.
  2 right click on the preview of the window.
  3. If the word move is dimmed in the menu, click restore , and then right click on the preview again.
  4. click on move .
  5. press and hold down the left arrow key to move the window to the main screen.
  6. press enter .

  Boulder computer Maven
  Most Microsoft Valuable Professional

• How to monitor the status of the application - REST

  Hi all

  I was following the blog using vCAC 6.X REST API - Part 2 - elastic sky to request a REST. I was able to post the request. It returns the response immediately after the successful presentation.   How to monitor demand? "The response of the application object has assigned to the header 'rental' property https:// < < hostname > > /catalog-service/api/consumer/requests/56428808-f9a0-4bac-b83d-ce75ddc86b78 '.

  I tried to use URLs of 'place' that didn't work.

  var requsetRest = vcacHost.createRestClient (vCACCAFEServicesEnum.CATALOG_SERVICE);

  var response = requsetRest.get ("consumer/applications/56428808-f9a0-4bac-b83d-ce75ddc86b78");

  
  

  Any help appreciated.

  
  

  Thank you
  

  I was able to get the application to the vcaccafeenitiesfinder.getCatalogItemRequest method.

• How to monitor the use of the Hyperion applications

  Hi all
  We have developed a classical Planning Application in Hyperion 11.1.2
  The application is running in production mode, and now we want to monitor the use of this application, in this regard, I have following questions:
  (1) how to activate the newspapers?
  (2) how to monitor the time of connection and disconnection of each user
  (3) how to check the amount of data entered in a particular week
  (4) how to check that data are entered against how much the faculty members?

  I won't pretend to know what should I know about this subject, but I get this question of a large number of customers. So, here is my answer. There is no right way to monitor who logs and how many times they connect. If you enable the audit DATA, that you can do is to see when a user loads the data and how often they do. This does not match the connection, but planners usually don't connect to display data (which are normally made in EN or SmartView), they connect to load/update of data. With active audit DATA, you can query the HSP_AUDIT_RECORDS table, which is where the audit is stored, and see how many times the user load the data and the last load of data. Is not correct, but it is far more closely than any other method I've found.

  Example of the last connection (really last loaded data)
  SELECT USER_NAME AS 'User', time_posted as 'Last Login Time' OF HSP_AUDIT_RECORDS WHERE TYPE = "data";

  You can use a similar query to count the number of data loads.

  This would also show you what the user has launched it to business rules.

  Another option would be to enable SSAUDIT on the planning application in Essbase (this is done in the Essbase - google SSAUDIT server configuration file). This will create 2 files. The first is a file index or pointer. There will be a line for each record, via a web form or SmarView load. The second file contains all of the loaded data. The first file will tell you that loaded which lines in the second file and what time he did. The downside is that each connection between planning and Essbase uses the ID of the source of data for planning. So, it always shows the same loading data ID and will not be the real of the user who did it.

  Note that users do not have to connect through planning. They can directly connect to Essbase. All financial reports that would be misunderstood by looking only at the planning.

  If you really want the actual load, you really watch the Essbase and Essbase application log files. Would not show you users, but could show you the number of queries, the data loads, etc. You could analyze these logs in a relational table for quick access to the use of the query.

  That's a lot of things to take. Unfortunately, to answer your question, it is not a quick option, "click here."

  Utility to analyze the logs can be found at http://code.google.com/p/jrightlog.

  ------------
  Kyle Goodfriend
  http://www.in2hyperion.com

  Please be sure to assign the post as answered and answers as response or useful if others can benefit from your experience.

• monitor the remote JVM to a web application

  I have a web application hosted by tomcat. Any application is hosted on the server. Can I follow JVM's behavior through my system?

  Follow the following steps
  If you have access to the server only

  Step 1: define the suite JAVA_OPTS in file catalina.bat tomcat/bin
  JAVA_OPTS = - Dcom.sun.management.jmxremote = true - Dcom.sun.management.jmxremote.port = 7091 - Dcom.sun.management.jmxremote.ssl = false - Dcom.sun.management.jmxremote.authenticate = false

  Step 2: Redeploy application

  Step 3: open JRMC marks a new connection. Give the Ip address of the server where tomcat is deployed and jmx port 7091.

  you will be connected to the remote JVM hosting the application

• BakerlessPillowwork in the Application Support folder

  I went looking for suspicious files after clicking a download link shaded and found this in my root (?) Record of Support request. Mention this because otherwise I would have thought it was a new file placed by an update, but I have not updated my OSX in awhile

  

  Inside the BakerlessPillowworks folder is an application of process simply called 'agent' and .plist files.

  

  

  I force quit on the process of 'agent' in the activity monitor and put the folder in the trash on a case where (are not empty, but I think that all signs point to him having to be removed)

  I found nothing else on this file for my bets are that it is new, but I hope that someone else could have seen or have a better idea of what it is or what to do.

  Thank you in advance, I made an account just for this post

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  You may have installed one or more variants of the Trojan 'InstallMac '. Please take the following steps to disable.

  The criminal behind this attack tries to make the malware difficult to remove by varying names of the files it installs. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Back up all data before proceeding.

  1 triple - click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  ~/Library/LaunchAgents

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return. A folder named "LaunchAgents" opens.

  Press command-2 key combination to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click on this title to sort the content by date. This will make the related files easy to identify regardless of their names, because they will have the same modification date.

  2A inside of the folder that you just opened, there may be files with the name of all these forms:

  something. AppRemoval.plist

  Something.download.plist

  Something.ltvbit.plist

  Something.notification.plist

  Something.Update.plist

  Here, something is usually an empty string of sense, for example one of the following:

  Epolife

  InstallMac

  Javeview

  Kuklorest

  Manroling

  Otwexplain

  Here are examples, not a comprehensive list. The chain could be anything, and there might be more value of something. Looking for a group of files with the same date of change who match the description.

  Lately, the striker of "InstallMac" a were quick strings 'AppRemoval', 'download', 'ltvbit' and 'update' in the names of its records. For example, you might see file names such as these, instead of the above:

  something. AppVemoral.plist

  Something.dolnwoad.plist

  Something.btvlit.plist

  Something.uadpte.plist

  You may have more than one copy of the malware, with different values of something.

  Place all of these in the trash. If there are other files whose name begins with something, those in the trash also move. You can get a caveat that some files are locked; Delete them anyway.

  Once you've done that, we may not have anything left in the LaunchAgents folder; in this case, you can remove the folder, but otherwise does not delete it. Other files in the folder are not necessarily malicious (though they may be, if you have also installed another type of malware).

  Log off or restart the computer. The Trojan horse should now be inactive.

  3. This step is optional. Open the folder as in step 1:

  ~/Library/Application Support

  and move it to the trash of the subfolders with the name, something you found in step 2.

  Do not move the Application Support folder or anything else inside.

  4. open the Applications folder. If there is an element named something, or "Hell Zip", or with any of the other names listed in step 2, then drag it to the trash.

  If in doubt, press option-command-4 key combination to get the apps by date added. Look at the apps that have been added since you first noticed the problem. If there is one, that you don't recognize, drag it to the trash.

  You can get an alert that the item is locked. Confirm that you want to move to the trash.

  Empty the trash.

  If you receive an alert that the application is running, force it to quit.

  5. from the Safari menu bar, select

  ▹ Safari preferences... ▹ Extensions

  Uninstall all extensions, you don't know that you need. When in doubt, remove all of them. None is required for normal operation. Do the equivalent with Chrome and Firefox browsers, if you use one of the people.

  If the window does not open, restart the computer in safe mode. Some caches maintained by the system will be rebuilt.

  6. replace the search engine and home page in each of your browsers, if either has been changed. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

• AppleTV pairs with the watch but subsequently does not appear in the application of the watch.

  I have 2 AppleTV, a connected by wifi, domestic one on the LAN by ethernet.  Those on ethernet not showed as a selection on the application of the monitoring, so I "added feature" on the application Remote, the Apple Watch appeared in the matching section of the AppleTV remote and was easily matched.

  But even if the AppleTV can see the watch for matching it still does not offer as one of the selections, just connected wifi AppleTV and my iTunes home sharing.

  Just rebooted, removed and re-paired the watch with the ethernet connected AppleTV and still it is not offered as an option in the Remote app.

  How could he be watch for matching and not for actual use?

  Hi Bob

  Guidelines for the use of Apple Watch as a remote for Apple TV Apple inform that this is possible when the devices are connected to the same Wi-Fi network:

  "You can use Apple Watch as a remote control for your Apple TV, when you are connected to the same Wi - Fi network."

  More information:

  Use Apple Watch as a remote for iTunes or Apple TV - Apple Support

• My iMac is freeze-Up When Safari using (no memory for the application)

  My iMac (OSX v10.9.5, 2.7 GHz, Intel core i5) freezes frequently (more than once a week) while using Safari (v9.1).  Safari suddenly stops working and the fearsome death spinning beach ball begins.  Quit smoking force works sometimes, but most of the time, all the computer freezes and I have to do a hard reboot of the computer power off then restart it from scratch.

  I left my open activity monitor and when it froze again today, I could see that the contents of the Web seems to be the problem area.  The Force Quit window says that my system is out of memory the application.

  When the computer is finally thaws after reboot, it works fine for a while then all of a sudden stops working when Safari freezes.  He has done when I'm on Safari, surfing on the internet or when it is in "standby".  Is not serious.

  Another thing, lately partial images appear on the screen and then disappear.  Images pixelated also but my office.  Makes me feel like the hard drive is about to crash.

  I was wondering what could be hogging memory? Web content?  How should I do if I can use my computer without having to reboot several times a week?  Thanks for your help.

  HotHunt

  

  How much memory you have installed? The image you posted shows nothing about what is the use of memory and how much. For this you use the activity monitor.

• How can I remove the application dropbox to my Imac?

  iMAC 21.5 Inc.

  OXS X El capitan

  10.11.3 Versie

  How can I remove the application dropbox to my Imac?

  I get a warning when I click on the dropbox app to delete!

  Thank you very much

  ollylibby

  Official instructions are here-> https://www.dropbox.com/help/41

  It helps tremendously if you actually post the text of the error message that you receive.

  You may need to view the activity monitor, search for dropbox and stop all processes before removing the Dropbox app in the folder/Applications.