Monitoring timer device as it stopped working and is causing closure Frequent downs.

Similar Questions

• A pop up window telling me:-mobile device service has stopped working and was closed

  original title: mobiledeviceservice has stopped working and was closed

  A pop up window telling me: -.

  Microsoft Windows

  MobileDeviceService has stopped working and was closed

  A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  The only opposition is to close. After closing, it ceases to appear after a few seconds. So, how to solve this problem?

  Hi Nati,

  1. when exactly you receive this error message?

  2. What is the full error message you get?

  3. you remember changes to the computer before the show?

  You can try to perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

• monitoring of device application has stopped working

  Hello - I'm having all kinds of problems with the Lexmark printers, but my current problem of the has to do with the above message.  I found a similar position from June 2009 who suggested running a scan, which I did and the info was provided:

  Windows resource protection found corrupt files but was unable to solve some of them.

  Details are provided in the CBS.log windr\logs\CBS\CBS.log newspaper

  I found the text document but you get an access denied message.

  Any suggestions?

  Thank you

  Lynne

  Hello

  As SFC scan has found errors and was not able to fix them, there is a strong possibility that the file system can are damaged. To resolve this problem, we will have to perform an upgrade on the spot. To do that follow the article below:

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

  Note: I recommend you back up your data before performing an upgrade on the spot

• -Pop-up message each time I log in that says: "ntvdm.exe has stopped working and it will be stopped."

  Greetings, West this pop up message annoyng which continues to appear a little each time, even if after I start my computer. It is said "ntvdm.exe has stopped working and he will be shut down", I close the window and aparently everything works OK. But it continues to if at all times, is there any problem? Why does this happen? Can it be fixed and how?

  My computer has an Intel Core Duo 2 CPU E6550 2.33 GHz, with 2 GB of RAM and my OS is windows vista business SP1 32-bit.

  Thanks for any help,

  Pedro Borba

  original title: ntvdm.exe stop working and will stop

  SALAM... I SAW UR QUESTION... HOWEVER, I KNEW THAT U HAVE PROBLEM WITH UR PROCESSOR FAN... PLEASE CLEAN IT WITH WIND TUNNEL YOU CAN FIND IN THE MARKET... AND BIOS PLEASE INCREASE THE TOLERANCE OF UR CPU TEMPERATURE... MY BEING of VALUE to 50 AND UR PROCESSOR IS HEATING BETWEEN 45 AND 55 degrees. TRY IT INSHALLAH IT WILL WORK... HOPE SOLVE UR PROBLEM...

  MOHAMMAD TOUSIF

• The last 3 times I clicked on auto updates of firefox firefox has completely stop working and I have to open the Explorer and again to download firefox.

  I'm afraid to update firefox since the last 3 times I did so firefox stop working and had to be reinstalled.

  I'm glad it works again. This is the important result and thanks for posting back.

  Repeated to uninstall and reinstall Firefox often do not help.
  Clicking on the pop-up of unknown or doubtful origin, it is always a bad idea.

  Screenshots will help if you are still having problems.

  Connects to any future reference is not to the internet, after a new installation may be related to problems with the firewall or your security software not recognizing Firefox.

  • Difficulty of problems connecting to websites after Firefox update
    • Configure the firewall so that Firefox can access the Internet
    • Configure the Windows Firewall to allow access to the Internet Firefox
  • Other issues, see Firefox cannot load websites but other browsers may

• Windows Audio device Graph Isolation has stopped working and was closed.

  I am running Windows Vista Ultimate 32 bit. My volume on the system tray icon has an 'X' on it, and when I mouse over it it says "audio service does not work." When I right click on it, the open Volume mixer is grayed out and unclickable. When I get my audio settings / sounds an error pops up saying "Windows audio service is impossible. You want to allow it? "I click on Yes and then he said: 'Windows Audio Graph insulation has stopped working and was closed. »

  the error report is:

  Signature of the problem «»
  Problem event name: APPCRASH
  Application name: AUDIODG. EXE
  Application version: 6.0.6001.18000
  Application timestamp: 47919284
  Fault Module name: AUDIODG. EXE
  Fault Module Version: 6.0.6001.18000
  Timestamp of Module error: 47919284
  Exception code: c0000005
  Exception Offset: c 000070 0
  OS version: 6.0.6001.2.1.0.256.6
  Locale ID: 1033
  Information additional 1:3502
  More information 2: a465924573e02e7dbf28b31e7ea12c28
  Additional information 3: a4b
  Additional information 4: 91409072175cd5a219bdca7388005249

  Additional information about the problem
  Bucket ID: 932674242 "

  This is on a DELL XPS M1710
  I uninstalled the driver and reinstalled, uninstalled the device itself and not reinstalled, no change.

  No software installation seemed promt it.

  What are my options?

  deafinhum,
  If you run the utility from the Vista DVD System File Checker, it will extract the files it needs to turn off the DVD to replace those damaged.  If this does not work, you will need to do a repair of your Vista installation.

  Here is an article to help you with the repair process.  Please let us know if you need more assistance.

  http://support.Microsoft.com/kb/936212

  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get a message saying that Windows Explorer has stopped working and when I restart it pop again.

  Hi I have windows vista basic and it worked very well until yestaday and I got a message saying windows Explorer has stopped working and when I click on restart 3 seconds later, he appears once again?

  original title: Windows Vista Basic worked fine until yesterday and now I get messages saying that Windows Explorer has stopped working.
  Hello

  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• keyboard randomly stops working and continues after reloading safari. Running El captain

  wireless keyboard randomly stops working and continues after reloading safari. Captain El running. He did once, using Word as well. On the occasion when his order in safari it works in Word and then stops again.  Y at - it a cache keyboard or something that needs resetting? Any help would be welcome.

  If your USB keyboard or wireless does not work

  Keyboard does not work

  Keyboard/mouse - troubleshooting wireless

  Reset an Apple Bluetooth mouse or Trackpad wireless keyboard (pairings and other common troubleshooting problems)

  Bluetooth devices no longer meet

  Sources of interference Bluetooth

  Sources of interference of Bluetooth (2)

  If your Wi - Fi connection is able to generate a 5 GHz signal, try this.

  Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

  Reset the NVRAM EXTRA memory

• Spooler subsystem app stopped working and was closed.

  When spooler subsystem app stopped working and was closed, which is causing this problem and how can I reinstall it and continue to use my computer, I installed a new program on my computer?

  Hello
   
  1. What is the name of the program you are trying to install?
   
  2. you receive an error code?
   
  3. what happens when you try to print?
   
  Refer, http://TechNet.Microsoft.com/en-us/library/cc766474%28V=WS.10%29.aspx
   
  Please follow the links below to solve the problem.
   
  Method 1
   
  In Windows Vista:
   
  a. click on start
   
  b. click Control Panel, click programs and features,
   
  c. click on Turn Windows features on or off, expand Print Services, clear the LPR Port monitor check box and select the Internet printing Client, and then click OK.
   
  If the steps are still not then continue to.
   
  Method 2
   
  This problem may occur if a printer driver that is installed on the computer is damaged.
   
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  
  322756 how to back up and restore the registry in Windows
  To resolve this issue, delete the printers and drivers for printers, then remove the items that are under certain keys in the registry. Follow these steps:
   
  a. If possible, remove all of the printers that are listed in the Printers window.
   
  To remove a printer, right-click the printer in the Printers window, click Remove, and then click Yes to confirm the deletion.
  
  (b) in the Printers window, on the file menu, click Server Properties.
   
  c. on the tab drivers, remove all the installed printer drivers.
   
  d. to remove a printer driver, click the driver, click Removeand then click Yes to confirm.
  
  Start the registry (Regedit.exe) editor.
   
  (e) export the following registry keys:
      HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Print
     
  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print
     
  f. remove all items listed under the following keys (do not delete the keys themselves):
      HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-2
      HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-3
  
  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Environments\Windows NT x86\Drivers\Version-2
  
  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Environments\Windows NT x86\Drivers\Version-3
  
  g. remove all items listed under the following keys by default:
      HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors
     
  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Monitors
  
  The list of default monitors includes:
  AppleTalk printing devices (when Services for Macintosh is installed)
  
  BJ language monitor
  The local port
  PJL language monitor
  Standard TCP/IP port
  USB Monitor
   
  
  "Windows NT Fax Monitor (if a Fax Modem is installed)"
   
  For more information on the items are not by default, click on the number below to view the article in the Microsoft Knowledge Base:
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
  
  h. remove all items listed under the following keys:
      HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers
     
  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Print\Printers
  
  I. close the registry editor.
  J. restart your computer and reinstall the necessary printers.
   
  I hope this helps.
   
   

• Windows Media Center Receiver Service stopped working and was closed. A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  Started getting the error Windows Media Center feared about 3 weeks ago.  I have tried the MS fix, reflected on the web for solutions, have run sfc/scannow (no violation of integrity) and nothing works.  Cannot restore system it's been 3 weeks.
  System was working fine 1 day and then bam... error messages began to appear.  I can always go into Media Center and listen to music or watch recorded shows.  I just can't watch TV or record something again.   I checked the Device Manager - material and everything works fine. Need help please...   Thank you.

  I guess that's the article that you are referring to?

  Error message when you start a Windows Vista-based computer: "Windows Media Center Receiver Service stopped working and was closed".
  http://support.Microsoft.com/default.aspx/KB/936229

  This site has some good ideas for you to try.

  How to fix the Windows Vista registry entries and files Media Center
  http://blogs.msdn.com/astebner/archive/2007/03/16/how-to-repair-Media-Center-files-and-registry-entries-on-Windows-Vista.aspx

  "Windows Media Center Receiver Service... "Error
  http://thegreenbutton.com/forums/p/50233/223005.aspx

  http://www.Google.com/search?q=Windows%20Media%20Center%20Receiver%20Service%20stopped%20working&hl=en&RLS=com.Microsoft:-AU & output = search & TBS = rcnt:1 & tbo = 1

  See if the System File Checker can help you?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  See if you can isolate some processes of third party as the culprit?

  310560 How to troubleshoot by using the Msconfig utility in Windows XP
  http://support.Microsoft.com/kb/310560

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/929135

• Receive the error "Windows Media Center Receiver Service stopped working and was closed" after the video card replaced

  I have a HP computer with Windows Vista Home Premium (32-bit) Service Pack 2.  He has a VISX PureTV tuner card and already had an NVidia GeForce 8400 graphics card.  This Setup has worked well for 2.5 years until what the graphics card died last week.  It has been replaced with an ATI Radeon HD3450 and both all Windows updates have made current.  Since that time, the TV tuner did not work.

  When you sign in to an account, it gives the error message "Windows Media Center Receiver Service stopped working and was closed".  I can use Media Center to watch the recorded video before, but if I try to watch live TV he hangs up and close Media Center.  If I try to configure the TV connection in Media Center it tells me that there is no tuner card.

  I looked at the map and see no problem and I tried it back in place.  He has the most up to date drivers (so does the new Radeon graphics btw).  I tried "Uninstall" in the Manager of devices and then put it back, but it was not good.

  "Windows Media Center Receiver Service Stopped Working and was closed" I tried all the fixes I've seen this error.

  I tried all the things I saw here and elsewhere related to this issue.  I did a "clean boot" with all non-Windows services and the disabled startup process.  He always did the same thing and gave the same mistakes.  It seems to be linked to a Windows service, and I hesitate to begin deactivation to track down.

  I ran 'sfc' in mode 'cmd' and he found no problem and none of the files to be fixed or could not fix.

  In the list of services, I changed the login for "Windows Media Center Receiver Service" to "Local System account", Local Service, Network Service and individual accounts, but no permits.

  I'm afraid I'm at the point of having to reload the Vista, but I don't know how to do this and want to avoid at all costs.  I don't have the recovery disks and software.  Is this enough?  Can I reinstall from the recovery disks without wiping everything aft of the configuratiion with which it was delivered?  I guess personal files will be OK (although I don't know this for sure), but I'm afraid I'll have to reinstall other applications, my family has developed over time and perhaps lose the media protected by DRM licenses.

  Someone has encountered anything like this or have any suggestions?

  Well, I finally stumbled into the solution.  It was caused by a conflict with another application.

  A few weeks before the card failure I had installed a program called video capture Replay Video Capture that I had bought a few months ago and never used.  However, at this time where everything including the TV tuner and Media Center worked well that's why I associate the problem with this software.  The problem comes after the system is rebooted the first time after installation.  In my case, it has not been rebooted until a few weeks later as part of the recovery of the fault of the graphics card.  Suddenly, the TV tuner did not work and I get the error messages mentioned in this title of the thread.

  I was at the end of my rope with this and was just to clean your system to do a reformat and reinstallation.  I uninstalled the Replay Videa Capture program to move it to another computer, and when you restart the computer I noticed that the error message disappeared.  Of course I went to the Media Center and could set up my TV tuner card and watch television.

  Looking for some info on this conflict, I found the following. (http://forum.applian.com//showthread.php?847-Conflicts-between-RVC-and-XP-Media-Center-OS&s=c0aec9897b51d550c47b919e73e59bfc)  It is difficult to say who is at fault in the present.  I'm sure that Microsoft accuses Applian for the encoder to mpeg (mcm2ve.ax) used in Replay Video Capture, while Applian says that the problem is a Windows process (ehrec.exe) that works all the time, hogging the tuner on the system device.  According to Applian other products similar to theirs have this conflict as well due to the process of Windows.

  Fortunately, there is a solution in this case.  Applian has released a new version of Replay Video Capture (version 4.2) that uses a different mpeg encoder and eliminates the problem.  Given the surprising lack of info about it on the Microsoft Web site, I wonder how many other people with this unresolved issue dealing with the same thing as me.  If you're like me and you don't usually need to reboot your PC for a few weeks at a time, you may never know to associate the problem with the application.  What a waste countless hours trying to diagnose, and most disconcerting, that's what I was about to go through a reformat and reinstall because of this.

  Thought I'd post here my problem resolution in the hope that it might help someone else.

• Display driver has stopped working and has recovered - Inspiron 7359 2-in-1

  This happens several times a day, please see the error message in the screenshot-"ha stopped working and also recovered display driver.

  The strange thing is that she mentions Windows 8 when I have 10 Windows running on the machine. I also removed the display driver and installed from the dell support web site. Also updated the BIOS from the same place.

  

  Had the same problem with an XPS 15 9530, to the point where it drove me crazy. I can confirm that, for a few days it's been corrected by installing the beta driver for Intel. You must uninstall the driver from Device Manager Dell, reboot and then install the beta driver.

• display driver has stopped working and recovered

  In my laptop, I get a message from the display driver has stopped working and my screen goes black and crash suddenly

  Details of my laptop are
  Compaq 620
  Windows 7 ultimate 32 bit
  Intel (r) Core (TM) 2 Duo CPU T6570 2.10 GHz
  Display map Mobile Intel(r) 45 Express Chipset Family (Microsoft Corporation - WDDM 1.1)
  Hitachi HTS545032B9A300 ATA Device driver
  Display Mobile PC screen 1366 * 768

  Help, please

  I would start by removing the current driver and installing the latest driver available.  (yours is 5 years old)
  

  
  

  "It is not a true crash, in the sense that the blue screen was launched only because the combination of material and video driver video was to be insensitive and not because of any exception processing synchronous".

  Since Vista, the components of "Timeout detection and recovery" (TDR) of the subsystem video OS have been able to do some really impressive things to try to find issues that would have led to the earlier OS like XP to crash.

  As a last resort, the TDR subsystem sends a video driver command "Please restart you now!" and wait a few seconds.
  If there is no answer, the BONE concludes that the combo of driver/hardware video has really collapsed in a heap, and it fires at this stop 0 x 116 BSOD.

  If playing with video driver versions did not help, make sure that the box is not overheated.
  Try to remove a side panel and a fan of big sector directly to the motherboard and GPU.
  Run it like that for a few hours or days - long enough to check whether the cooler temperatures make a difference.

  If so, it could be as simple as dust accumulation and inadequate cooling afterwards.

  I download cpu - z and gpu - z (both free) and keep an eye on the video time

  For more information please read this blog http://captaindbg.com/bug-check-0x116-video_tdr_error-troubleshooting-tips/  

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557263%28V=vs.85%29.aspx

• "Driver Installation module stopped working and was closed" error nvidia

  Today I installed the version of Vista Ultimate with SP1 (PTM51E - Bios 3.60)

  Since installing I can not any version of the nvidia drivers graphics card to install.

  "Driver Installation Module stopped working and was closed" is the error that happens every time.

  IM immensely frustrated by this

  Why you post twice?
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=114172#114172

  Recommended to follow only a single wire

• HP pavilion G4. Keyboard stopped working and Wifi off, unable to turn on the WiFi.

  I have a HP pavilion G4, Windows 7. Keyboard stopped working and Wifi off, cannot turn on the wireless device.  I use a keyboard usb type, but has no a wireless on/off button. I tried F12, ctrl + F12 or Alt + F12, etc. without effect. I tried the keyboard of the screen, but it also has wireless on/off button.

  Is there another way to turn on the wireless device?

  Thank you.

  First install the hp connection manager, open it and use the power in front of the wireless button to turn on the wireless connection

  link

  http://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54945.exe