HP pavilion G4. Keyboard stopped working and Wifi off, unable to turn on the WiFi.

Similar Questions

• Why my 8 Adobe has stopped working and I am unable to download the latest updates?

  My 8 Adobe has stop working and now I am unable to open everything about Adobe. I tried to update to the latest cersion, but don't succeed.

  The most recent version is Adobe reader X (10)

  I do as suggested by Azam and uninstall the previous version. Have you tried a system restore to an earlier date and then tried to uninstall. If you click on "help" in the toolbar of the Adobe Reader there may be an option "repair Adobe installation".

  You could also try to reinstall Reader 8 and try once again an uninstall.

  If all else fails I try and install Reader X in any case if you have a corrupted version of the 8

• Windows Media Center Receiver Service stopped working and was closed. A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  Started getting the error Windows Media Center feared about 3 weeks ago.  I have tried the MS fix, reflected on the web for solutions, have run sfc/scannow (no violation of integrity) and nothing works.  Cannot restore system it's been 3 weeks.
  System was working fine 1 day and then bam... error messages began to appear.  I can always go into Media Center and listen to music or watch recorded shows.  I just can't watch TV or record something again.   I checked the Device Manager - material and everything works fine. Need help please...   Thank you.

  I guess that's the article that you are referring to?

  Error message when you start a Windows Vista-based computer: "Windows Media Center Receiver Service stopped working and was closed".
  http://support.Microsoft.com/default.aspx/KB/936229

  This site has some good ideas for you to try.

  How to fix the Windows Vista registry entries and files Media Center
  http://blogs.msdn.com/astebner/archive/2007/03/16/how-to-repair-Media-Center-files-and-registry-entries-on-Windows-Vista.aspx

  "Windows Media Center Receiver Service... "Error
  http://thegreenbutton.com/forums/p/50233/223005.aspx

  http://www.Google.com/search?q=Windows%20Media%20Center%20Receiver%20Service%20stopped%20working&hl=en&RLS=com.Microsoft:-AU & output = search & TBS = rcnt:1 & tbo = 1

  See if the System File Checker can help you?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  See if you can isolate some processes of third party as the culprit?

  310560 How to troubleshoot by using the Msconfig utility in Windows XP
  http://support.Microsoft.com/kb/310560

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/929135

• Internet Explorer stops working and ends when I try to view the pdf

  I have a Pav dv4. Whenever I try to view a pdf file, Internet Explorer stops working and closes.

  Hello:

  Try a repair/reset to zero of the IE browser.

  See the link below. Use AutoCorrect it and then look at the screenshots below on the page to reset.

  http://support.Microsoft.com/kb/318378

  Paul

• Roxio Creator 2012 has stopped working and comes up with an error in the Visual C++ Runtime library.

  Original title: what is the number of the download version 03/03/2011 for Visual C++ 2010SP1 x 64 Redistributable?  It is newer than the 10.0.30319(x64)?

  Roxio Creator 2012 stopped running and comes up with an error in the Visual C++ Runtime library.

  Hello

  1. What is the exact full error message?

  2 is specific to the program the issue?

  3. you remember changes to the computer before the show?

   
  When was the update of Visual C++ 2010 installed and you can check the version in which it is most recent according to the installed update.
   
  Method 1:
  Install the latest version of Microsoft Visual C++ (x 64-bit) available at the following link.
  http://www.Microsoft.com/download/en/details.aspx?ID=14632
   
  Method 2:
  If the problem is specific to the program perform repair installation of Roxio for the following steps.
   
  (i) by clicking on the Start button, click Control Panel, clicking programs, and then clicking programs and features, open programs and features.
   
  (II) select the program Roxio and then to change or repair a program, click on change or repair.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
   
  In addition, if the problem persists after the question in the following link
  http://forums.support.Roxio.com/Forum/300-installationuninstallationupdate/

• USB mouse & keyboard stop working after the upgrade of Intel generic drivers drivers!

  Original Post: USB mouse & keyboard stop working after upgrade to generic drivers

  After you install Windows, the Generic USB controller drivers are installed. My mouse & keyboard as planned work & that are each recognized as "compatible mouse/keyboard HID."

  After I installed the Intel drivers for root USB controller, the mouse & keyboard stop working and are classified as unknown. Shortly after, they are considered HP USB Optical Mouse & HP USB Standard keyboard, however the drivers never properly install and they remain under unknown devices with a yellow exclamation point.

  I have searched high & low for these device drivers, they do not exist. I installed the drivers for all of the materials appearing on the site of the seller. This has happened on several computers, laptops and desktop computers.

  I've done all the troubleshooting I can think. Uninstalled all the controllers/USB hubs & restarted. Switched USB ports, I tried new mouse & keyboard, wanted Windows updates.

  The only way I can make it work is if I use the generic Windows drivers, who then recognized the mouse & KB "HID compliant". It seems that if I install Intel drivers, it recognizes the mouse & keyboard more in detail and he wants specific drivers to continue.

  Any help / suggestions would be greatly appreciated.

  Thanks for the reply.

  Because your computer is on a domain network, it would be better to be posted on the TECHNET forums. They are experts in your field of investigation and would be in a better position to answer your concerns.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=w8itprogeneral&filter=AllTypes&sort=lastpostdesc

  In the future if you have problems with Windows. Not to contact us. We will be happy to help you.

• Vista: All Windows updates suspended / "Module of Windows Installer has stopped working and Will Close."

  On my installation of Vista, all windows updates no longer work.  If I try and run them from Windows Update in Control Panel one starts to run but then it just hangs.  At the same time, I get a message "Windows install Module has stopped working and closes".  If you look in the services, it is crushed, but restarts.  The update remains always hung.  It doesn't matter what update I try and run, I always get the same result.

  When the computer is shut down, it also tries to automatically install updates.  These also hang on the first, which means that I have to force power off the computer.

  Don't know if this is related, but I don't think that SP2 already installed - it kept if crush (don't remember what was the error message).  When I restart in safe mode it tells me that I'm still on SP1.  I followed all the suggestions on how to get SP2 installed for the error I received, but nothing has worked.

  Do not really understand what I have really installed a lot of "_" on the PC, it is a "clean" installation (about 1 year now).

  Any ideas?  Really, I don't want to have to do a re-install, but I suspect that is where I'm heading unfortunately.

  Hi AndrewInNZ,

  Thanks for visiting the site of the community of Microsoft Windows!
   
  I would like to ask you some questions for a better understanding of the issue:
   
  (a) did you try to temporarily disable the security software and check if updates are smooth?
   
  (b) you are using a firewall in addition in instead of the windows firewall? If so disable (temporarily) of the third party firewall and look for updates.
  It is usually caused by a 3rd party firewall that it blocks the internal ports.
   
  Check out WERCON for more information-
   
  1) Click START | wercon.exe type in the search box start and click on enter.
   
  (2) select "View problem history", under 'Windows identified problems' with the right button on a problem, and then select "view problem details. Click "Copy to Clipboard" export to text document
   
  Also reset the Firewall setting:
   
  1) Click START | type FirewallSettings.exe into the start search box | Click on FirewallSettings.exe above | Select the Advanced Settings tab. Click 'Restore Defaults ' | Click on apply (if Hi-lighted) | Click OK

  Check the status of the service as well:

  Log in as administrator-

  Start button | Control Panel | System and Maintenance | Administration tools

  Double-click on Services

  (Provide the administrator password or a confirmation if prompted to do so.)

  Right click on the 'Windows Modules Installer' service, and then select Properties.

  Select the general tab - make sure that the startup type is manual

  Here is the link to solve problems connecting to Windows Update or Microsoft Update
  : http://support.microsoft.com/kb/818018/en-us

  If you want to check the version of the service pack of the operating system:
   
  Right-click on computer and select Properties.

  Hope this information helped!

  Thank you, and in what concerns:
  Aziz Nadeem - Microsoft technical support.
  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• AFN Updater has stopped working and was closed

  Original title:

  AFN Updater

  I get the following:

  AFN Updater has stopped working and was closed

  A problem with the application to stop working properly, Windows will notify you if a solution is available.

  The message stays all the time.  It has something to do with a phone, what can I say, but do not know how to get rid of it.

  Any suggestions?

  C

  Hello

  Search in the two programs and features and uninstall or look for a boot entry.

  "How to use MSCONFIG in Windows Vista"

  http://www.netsquirrel.com/Msconfig/msconfig_vista.html

  You can also use this free program to do, too:

  "Autoruns for Windows V11.32"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  See you soon.

• A pop up window telling me:-mobile device service has stopped working and was closed

  original title: mobiledeviceservice has stopped working and was closed

  A pop up window telling me: -.

  Microsoft Windows

  MobileDeviceService has stopped working and was closed

  A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  The only opposition is to close. After closing, it ceases to appear after a few seconds. So, how to solve this problem?

  Hi Nati,

  1. when exactly you receive this error message?

  2. What is the full error message you get?

  3. you remember changes to the computer before the show?

  You can try to perform a clean boot and check.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

• I was doing a pop-up error box that says: Winrscmde has stopped working and was closed.

  Original title: Winrscmde error message

  I was doing a pop-up error box that says: Winrscmde has stopped working and was closed.  A problem caused the application to stop working correctly windows will notify you if a solution is available.  How can I stop this, I don't know what is Winrscmde or what it does?

  Hello
   
  1. do you have this pop-up at starup?
  2 have you made any changes to the computer before the show?
  Winrscmde errors are usually due to the corruption of registry files.
  Method 1:
  
  Put the computer in a clean boot state, see if that helps.
  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135
  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.
  Method 2: Run the checker system (SFC) scan files and check if it helps.
  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista: http://support.microsoft.com/kb/929833
  Method 3:
  
  I suggest you make a system full scan just to be sure.
  Here is a link that will give you information on how to perform a full scan of the system:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest anti-malware
  definitions, download and run the Microsoft Safety Scanner again.
   
   
  , Note 1: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Vista SP2 after installing Spooler SubSystem App stopped working and was closed

  After installing Vista SP 1 and 2 my printers no longer work. the message that I get when the computer is

  "Spooler SubSystem App stopped working and was closed. A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  When I try to print it says I have to install a printer but then says turn the spooler.
  After turning on the spooler spooler turns his back on the coast.
  I tried to uninstall and reinstall printers, but it won't let me install printers.
  If I restore to previous date before installing SP1 and 2 printers work.

  Online, I see that many people have the same problem.
  I tried to contact Microsft but they tell me to contact HP
  and when I contact HP they tell me to contact Microsoft, as it was their problem
  I'm agree that Microsoft SP1 and 2 caused this problem.

  Hello Lonny Jones,

  Let's start by downloading the latest drivers and software from HP and see if that helps.

  When you install the drivers, it is important to perform the following actions:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver.

  4 reinstall the printer.

  Several references to printer:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

• 34957172.exe has stopped working and was closed. Windows error message

  Since the installation of Service Pack 2 for Vista, I receive the following error message that causes my computer to freeze - "34957172.exe has stopped working and was closed.  A problem with the application to stop functioning properly.  Windows will notify you if a solution is available. "How can I solve this problem

  Hi SherriTeille,

  (1) what is you receive the exact error message?

  (2) when exactly you get the error message?

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link

• Display driver has stopped working and has recovered - Inspiron 7359 2-in-1

  This happens several times a day, please see the error message in the screenshot-"ha stopped working and also recovered display driver.

  The strange thing is that she mentions Windows 8 when I have 10 Windows running on the machine. I also removed the display driver and installed from the dell support web site. Also updated the BIOS from the same place.

  

  Had the same problem with an XPS 15 9530, to the point where it drove me crazy. I can confirm that, for a few days it's been corrected by installing the beta driver for Intel. You must uninstall the driver from Device Manager Dell, reboot and then install the beta driver.

• The printer status window Interface stopped working and was closed. How can I fix it?

  When I try to print I get the following message from Microsoft Windows: Printer Status window Interface stopped working and was closed. A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  I have never received a Windows solution.  Once I have selected an email or other document to print and then click on print, nothing happens.  I then log out of windows and then reopen in an and the document will be printed.

  How can this problem be fixed?

  Hi all!

  This is usually resolved with a driver updated from the manufacturer.
  I highly recommend updating the driver to see if that takes care of the issue. If you need help, find the driver for your printer, please provide the make and model and I will do my best to find the right one for you.
  Thank you for using Microsoft Answers!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why that I get this message, Microsoft Windows Search Indexer stopped working and was closed

  Why that I get this message, Microsoft Windows Microsoft Windows Search indexing has stopped working and was closed [content] A problem caused the application to stop working correctly. Windows will notify you if a solution is available.

  Original title: he ceases to annoy me

  A problem with the operating system.

  I would also like to run a file system check to verify and repair the operating system files

  Run a file system check to check and repair your system files.

  To do what type cmd in start search box, and then right-click to run as administrator, then
  SFC/SCANNOW

  It may need be performed up to three times before success
  Let us know the results of the report at the end

  Read here for more information
  http://support.Microsoft.com/kb/929833