Montserrat Police not print or export

Similar Questions

• Export to PDF is not print all columns in a single page.

  Hello

  I have a report, export the report to PDF, but ALL the columns do not print on one page, he makes 2 or more printed pages.

  I agree if I have a horizontal scroll bar or the test size is reduced. Please see the recording and I would like to know if it's possible.

  We are unable to answer.  Certainly, it is not a limitation of PDF. You can have a PDF file to 200 inches wide (5040mm).

  But I don't know if SAP will do that for you. This isn't a question about Adobe Reader!

• Text converted to lines do not print

  I have an AICS3 document with text. The police is a little funny, but it worked. It shows in my document, but it will not be printed. I have fills of lines, it appears in my document, but it still does not print. I have placer place in an ID file, export it in PDF format. The text is displayed in the ID, but do not print. It appears so when I open the PDF file in Acrobat Reader, but not in Acrobat. In both cases, the text (which has been long converted vectorised text) does not print. Can anyone help? Given that the text has been converted with vectorized text isn't just a bunch of transparent traces? I even changed the filling with no luck. In general, I'm very tired of the way that we users are treated as criminals when it comes to fonts - without worrying if it is the problem here. I mean, what good is a font if you are unable to print it? Anyway, I digress. Any ideas anyone? I really want to do this thing printed.

  Thank you

  MGuilfoile

  G5/2500, OS 10.4.11, AICS

  Is - this possibly white text that has the "overprint fill" checked in the attributes Panel?

• LV does not print the barcode fonts

  

  It's the VI, I created to print a barcode. I set up the type size and police and then sent to the printer. But LV does not print the right font. When I made the same format in WORD and print, print correctly.

  Barcode font, I used is not installed on the local PC, but it is available in the printer driver. I guess this is the reason why print all fines. WHY CAN'T LV?

  You can simply use the TCP protocol to establish a connection to the printer on port 9100. The printer is set up to automatically close the connections that are inactive after 5 minutes. If you send only from time to time the label you must close the connection and reopen it when you send the next label. If you send a relatively steady stream of labels, you can leave the connection open.

• OfficeJet Pro 8610: HP OfficeJet Pro all-in-one 8610 do not print each attempt

  HP OfficeJet Pro all-in-One 8610 print intermittently

  11/09/2016

  This is a request for additional assistance from HP, Apple and AT & T Community Forums

  Machines and affected software:

  Printer HP OfficeJet Pro 8610 e - All - In - One.

  Serial number: CN4CNE3463

  Last updated: 06/09/16 (Version 5.0 (4.1.1 P, S; 5.17.1 F).)

  iMac 21.5 inch late 2009 (daily use)

  Serial number: W89415S5PC

  OS X El Capitan: Version 10.11.6

  MacBook Pro 13.5 inch late 2009 (occasional use)

  Serial number: W8942UW766D

  OS X El Capitan: Version 10.11.6

  MacBook Air 13.5 inches mid 2012 (daily use)

  Serial number: C02HX3ZADRVC

  OS X El Capitan: Version 10.11.6

  Wireless router: AT & T U-verse ARRIS NVG589

  more AT & T Wireless Access Point VEN501 device

  Wireless Router Range Extender: Linksys RE6500

  Multipoint unresolved printing problem:

  HP OfficeJet Pro 8610 had printed out successfully all the three above mentioned computers since the purchase of the 04/04/2015. End of August 2016 he started intermittently refusing to print wireless, sometimes do not connect wireless or holder from job to job.

  09/06/16 I posted the question on the Forum of community HP between 07/09/16 and 08/09/16 had dialogue on possible solutions. I followed the Commission received and interpreted it following recommended tasks - all without result:

  (1) sequential power off and cord power to the router Range Extender, OfficeJet 8610 Pro and iMac and removal after 60 seconds of powering the devices in the same order. Result: would not print.

  (2) off wireless to iMac. IMac connected to a printer via an Ethernet cable. Printer would not print.

  (3) tried to scan the printer for iMac's wireless: would not scan.

  (4) tried Scan via an Ethernet cable from the printer to iMac: Scan worked.

  (5) connecting iMac via an Ethernet cable to the router and printing system reset iMac to remove the printer and then added printer as directed by its name: HP OfficeJet Pro 8610 [455491]. The results have been mixed:

  (a) wireless to iMac to the router and Ethernet cable router for printer: test page printed.

  (b) the iMac to the router and wireless router for printer: test page will not print.

  08/09/16, having nothing specified by HP Community Forum, I contacted AT & T, the provider of my router and all my services (wireless, broadband, Internet, fixed phone) for the Support service.

  AT & T: recommended

  (1) make a new Setup wireless printing HP itself using my secure wireless network name and password, and then perform a reboot of the router. Between the two actions (new set-up and router reboot), the printer starts and print a previously submitted test page. To confirm that the printer was actually working, I turned off the printer, waited, he turned back and tried to print Test page: the page not print.

  (2) AT & T then told me to do a new manual of the printer setting. Just as I got Set Up on the screen of the printer, the printer prints the Test Page.

  AT & T told me that the printer should work fine now.

  Once I have shut down my system and restarted the 09/09/16, I found that I could not print anyway:

  Wireless to the router for printer

  Wireless to the router and Ethernet cable for printer

  Ethernet cable to the router and wireless to a printer

  Ethernet cable for printer

  Another experiment on 11/09/16 led to erratic printing depends on the original machine:

  1 iMac for HP printer: wireless printer for iMac gives not the Page of Test sent for printing, but a series of blank pages, followed by several pages of code and followed by more white pages. Code pages are all the same and then talking about the Cambria police (body).

  a. the first pages all State: %! PS-Adobe-3, 0% APL_DCS_Encodiong: UFT8% APLProducer: (Version 10.11.6 (Build 15 1)

  b. human beings second page with: 14 start/FontName dict / TJOLUV+ def Cambria

  Page 2 on three subsequent print reading attempts the same as above, except for a different set of letters before "+ Cambria". A UAXKPA, a JJCFBS, and the third is WOKHHG.

  2. yet, when I tried to print the Test Page of the MacBook Air and MacBook Pro wireless, printing is successful (i.e., the test page prints and do not print pages blank and coded.

  I'm sorely need a remedy to this overall situation.

  • What is originally intermittently, the HP printer?
  • What is originally a wireless printing and Ethernet to vary?
  • What is causing the iMac to print Virgin and code pages when the MacBook Air and MacBook Pro both print pages "regular"?
  • The question one demanding a new router?
  • DOE the question indicates the need to uninstall the printer and then perform a reinstall?
  • With all machine software updates could be software problems cross machine?

  Link to the firmware.

• Word 2007 does not print envelopes

  Using a HP Officejet Pro 8500 a network and the two latest drivers, do not print envelopes from a Windows Vista laptop or a desktop computer 7. Whether you use remittances. Envelopes dialog box or the impression to the separate envelope in the document page, do not print envelopes. Word and all other programs print OK. Address police is Arial, the color is automatic, envelopes feed themselves properly, I tried on the right, the left orientation and in the Center. I get a pass on the diagnosis of HP and Microsoft. Anyone know what is wrong, or what else can I try?

  I would suspect Word 2007 because the office is new, 2007 recently installed thereon, and Word 2003 on the old office printed envelopes with 8500 printer. But the laptop was 2007 since the release, and it printed envelopes on a Deskjet 6980 networking that is temporarily out of service. All programs Microsoft and HP are automatic updates.

  Posted 8lives

  Re: OfficeJet 8600 blank print envelopes

  corectly identify the parameter required in preferences! Paper/quality must be the size of envelope.

  Ceramic

• Samsung SCX-4100 does not print on the computer Windows 7 x 64

  I have a Samsung SCX-4100 printer.  It worked fine on two different computers of precedents, one with Vista and the other running Windows 7 (x 32).  I updated to Windows 7 Professional 64 - bit and charge computer driver Samsung x 64.  The printer appears installed but do not print.  It is listed on all my programs and, when told to print, the printer icon appears in the taskbar lower, but no document don't appear in the queue and the printer does not print anything.  Printing only that was the case, the installation, it printed on the test page correctly.  I used various troubleshooters in Windows, I've deleted and reinstalled the printer several times and nothing has changed.  I tried to re - setup the USB port to which the printer is connected, but I received this statement each time: "an error occurred during port configuration" and so I can't try to re - port.  I must tell you that I've initially left the programs and settings 32-bit for the 64-bit computer using the program PCMover, and I wonder if somehow I sent some incorrect settings to the new computer that are now interfering with the installation of the correct printer.  You have any ideas how I can fix, or help out at least that?

  For all those who may have been following this thread, as stated above, I have been unable to solve the problem using the recommendations provided by the technician above.

  However, after endless research and several experiments, I found a fix on another site:

  In Regedit, navigate to HKEY_LOCAL_MACHINE > SOFTWARE > policies > Microsoft > Windows NT > printers.
  Right-click on the Printers folder and select Delete to remove it.
  Restart the computer.

  It was the only thing that has worked to enable printers to work on my 64-bit machine.

  I hope this is useful to someone else who was pulling her hair on this issue.

  Brad

• Bar code is not printed on the documents

  I have a Windows 7 Starter on a laptop and I can not print the BARCODE on a document using a virtual printer that makes *.pdf or *.xps files.

  As it seemed that he lacked the interleaved2to5 police, I downloaded, but still does not print the barcode.

  Your best bet is to contact the company that makes the virtual printer software; This is what facing police in order to print it. If they have a Web site, check for a FAQ section or a user forum.

  SC Tom

• Brochure printing does not print all pages

  I have a file booklet that I printed from InDesign, a couple of months without problem. I went to print this week and the last pages 2 and 3 are not printing. I tried with a version of the file created by someone else. Same problem - last pages 2-3 didn't print. I tried to print to another printer, print from another computer. I always get the same result - the last 2-3 pages do not print. This happened to someone else? Anyone know what I can do about it?

  Thank you

  Tery

  An alternative:

  1. One of the manufacture of booklet scripts * for InDesign, allows to create a new InDesign doc "double width" properly imposed in the order of the brochure.
  2. Print the new Doc, or export it to PDF.

  * See, for example, the free script to the "http://sterlingcomputing.com/make-booklet-2016.html". (I am the author).

• Why I get a police error when I export my site in HTML.

  Why I get a police error when I export my site in HTML. I use typekit web fonts in the Muse? I am currently using only 2 typekit fonts in my design. Is there something that I am missing? Help, please.

  Hi Stacey,

  mac_heibu and Peter refer to a limitation of the export as HTML stream where you're not able to preview the fonts web Typekit exported locally because they are configured only with the URL of the site you specify in the export dialog box. Assuming that you are not running in any error export, is not not able to preview the exported local content is not a matter of concern as Typekit web fonts should work when you download content from the site to your FTP host.

  However, the error you mentioned is a problem that won't be solved itself when you download to your host.

  Please see my response to mrbenoit2 above and get back to me, if you still see the error.

  Abhishek

• Turn off printing when exporting to PDF from Indesign

  Hi I need to create a form T & C, which will be sent to outside customers, sales team have requested that this be readable but not printable in PDF format in one small step in safeguarding the environment. In fact, I reached last week and now for the life of me can not work out how to do it again. Anyone would be able to help?  Thank you, Claire

  NB: unchecking the "print layer" in the layer box Options does not work, unfortunately or not checking the "Unprintable" option in the attributes window. I have a feeling that it was something in the export dialog box, but certainly not an ermissions of security as the PDF option that I created last week does not require a password and does not print.

  I would create your security in Acrobat Pro.

  Open the PDF file and choose file > properties > Security.

  Set a Permissions password. Set up the document for printing. This does not require a password to open the document, but would require only a password if you want to change the settings.

• Form to be completed online will not print the second page

  I created a form with two page Acrobat with Adobe InDesign.  Everything seems to be in agreement with the form, except that the second page does not print.  The first page prints fine, but the second page closes like a blank page without content in the form or the data entered by the user.

  2012-2013 development funding application

  Thanks to you all.  My Department has been able to help me.  Because the form was created in InDesign, I've exported as an interactive PDF and could not change the printing options.  Something in the configuration of InDesign required Postscript drivers and all our internal printers contain PCL drivers.  They added the PS drivers and we are now able to print the second page.

• Do not print the fonts

  We bought a font for a specific job and InDesign, it prints without a problem, but none of these pdf default options make a printable pdf.

  Our postscript printer will not print pages with fonts.

  The only way to print a pdf file is a flattening transparency that makes all contours.

  Can you tell me if we need to make the flattening of contour round, or something more easy is possible?

  Police attached form.

  Best regards :-)

  

  There seems to be a problem with the police SpudAFTatty.ttf or Acrobat of it management.

  InDesign printed the file correctly and properly handled a pdf file imported with the police.

  9.5.0 of Acrobat and Adobe Reader 8 cannot print the police at all. The first document used the police SpudAFTatty and SpudAFCrisp, in that order.

  I created new documents with the SpudAFCrisp before SpudAFTatty, printed correctly SpudAFCrisp, SpudAFTatty did not print and my 5500 Bizhub Pro with a Fiery RIP turned a page in error log.

  Of the print from Acrobat dialog box, advanced features, I've deselected convert TrueType to Type1. The file is then printed correctly.

  I don't think there's a reasonable expectation to relay this information to potential end users, service providers and anything with certainty; but it is the best fix I think.

  I think that remember me Dov Issacs (?) referring to an update of this feature in AA 10; It could have been an obscure advanced feature different however.

  Edit - I hope that there are no sensitive data in the screenshot, English is my only language.

  PM Peter Spier or Bob Levine if it needs removal.

  [screenshot deleted on demand]

  Post edited by: Daniel Flavin

• An eps file is not printed

  Real noobie here. Using InDesign CS4. I created a brochure from a downloaded template. It has 18 images eps, who all display them correctly on the screen. When I print, 17 of these images of fine print, it prints nothing. I related to the image, but it does not help. I did export to inx/open/save as indd, which did not help, either. I would appreciate any help/suggestions.

  TYIA,

  Mike

  I wonder if it's a converted file from Quark.

  Select the graphic with the direct Selection (white arrow) tool, and then go in the attributes Panel. My guess is that it is set to not print. Just uncheck that.

  Meanwhile, may I also suggest a good book? Sandee Cohen Visual QuickStart Guide is a must for beginners to InDesign. You may also qualify for a subscription of one month to Lynda.com.

  Bob

• ID CS4 - text on a path does not print

  Hello experts,

  I'm nervous of preparation very big book for printing (Bible, 1300 + pages, very complicated layout). Everything was done in ID CS2 and several reprints have been OK - now I jumped to CS4 converted the book and that's problem is here. Text placed on the upper edge of the frame (through type on a path tool) disappears in PDF (snapshot included) resulting. However, the text in the frame itself is OK. Problem is that the path is a part of the textflow, so it cannot be easily replaced. It was absolutely impossible (for me) to force the ID to print the pages correctly (print or export worked). I reinstalled everything suite CS4 - and now about 75% of cases are OK the rest once again not. (before reinstalling nothing of the text was OK...)

  I can't change the layout or positioning of executives because ID will begin to recompose the text (works by this composer CS4 sometimes differently compared to CS2 ) is very risky because of the necessary additional proofreading. I can't yet go back to CS2 document - tried by INX double conversion - failed - text mentioned above is still invisible. And the original document from CS2 cannot be used because of the hundreds of corrections for new edition that all of them were made in CS4. So now what to do - I would really appreciate help from experts.

  Vlad Jurco

  Very well. I got the file and looked it over. Here are my findings:

  There seems to be an obscure bug in InDesign.

  Here's what happens:

  Vlad sent me a 178 page document. Most of the text flow between

  single and multiple blocks of text column, with under section headers

  text on the path of several blocks of text column beneath them. The

  first of all, 89 pages exported correctly. All pages from the 90th

  page exported without text on the path.

  (1) it does not appear that corruption of the text boxes. I created

  new images with text on path and text exported still hurt.

  (2) it doesn't have to do with the length of history. I have

  divide history in the Middle, and the same text was still missing on

  Export

  (3) export (text marked, etc.) Changing settings do not seem to

  have an effect.

  (4) the export of parts did not help.

  (4) after the split of the text, I removed all pages before the

  problematic page and the missing text was all there on the export.

  I conclude that this is a bug involving

  (a) text on a path

  (b) that belongs to the text Threading

  (c) on page 90 and on.

  If anyone is interested in building a new doc to confirm this; be my

  Comments!

  I see two ways to solve the problem.

  (1) divide the documents all less than 90 pages.

  (2) cut the text of the text on the path and paste it into the new text frames

  (while removing the paths of the Threading).

  Since there are a lot of Mid-page overlap heads; If you were building

  This from scratch, I would recommend using column flow here: http://www.in-tools.com/plugin.php?p=4

  Substances

  http://www.in-tools.com