More great option for OptiPlex SSD line

Similar Questions

• not enough options for the SSD drives?

  I intend to buy a desktop XPS 8700 special edition. I am disappointed that it doesn't give options for this model - for hard drives, only "2 TB 7200 RPM SATA Hard Drive 6.0 Gb/s + 256 GB SSD"-which is obviously a good combination, but for me, I think that a smaller SSD drive would be nice. "" Otherwise, I like the rest of the system. A friend who built his own PC says it has installed an SSD of 128 G and it is sufficiently large with Win8, MS Office, Photoshop and other large programs installed.

  So it of just a comment, is not a problem, but I hope that Dell would offer more options, including a drive to 3 or 4. A Dell technician suggested going to road work stations - but when I looked there, I was a little confused on the readers - workstations all seem to have several readers, probably for Raid configurations, which is something over my head and on my needs.

  Or is it a good idea to have a lot of free space on the SSD drive?

  Hi Hellogoodby,

  Thanks for your comments. It isn't that much of a difference in cost between the 128 GB and 256 GB SSD. Dell is probably buying in bulk from the right and customer demand now, most people want 256 GB or more. You are absolutely right that 128 GB is plenty for the OS and applications. I have a 250 GB Samsung Evo and have used less than 50 GB for the operating system, office and all my other apps.

• Three Options for Optiplex 780 follow-up?

  We have about 25 users who need 3 monitors for monitoring systematized and real-time data analysis. These users do not enter our requirement of workstation group. IE, they came away who need the performance of a workstation availability, although the need for the three monitors.  If it is difficult to justify one for their needs.

  I hope it has a healthy option available to provide any Optiplex 780 and 760 users with support for three monitors. I must point out, these are the models of office, the second most available small, who is probably the choice that much more limited. Currently we run the standard ati DVI and the adapter y - vga allowing them their two monitors. If we add a second video card flat with vga connector, the system would allow the three monitor is to be active? (windows xp and windows 7). I don't see a low profile card that would allow two monitors off the dvi (vga y adapater) more a stand-alone vga.

  Recommendations on how to do this without a rip and replace it?

  Thank you guys!

  Not looking at the whole picture.   DMS - 59 to two DVI has 2 outputs.  Out of each DVI DUAL LINK is the sense it has a DVI - D and DVI - A so he can do 1 digital and 1 VGA monitor with the 2nd cable Dell.     If you use 2 cables with 2 outputs DVI - A, you get 4 monitors.

  The other card more expensive that I linked has 4 DVI connections.

  

  Does not seem to you look at the links however to make me wonder if you're just a bot posting endless questions.

• m276nw: more great paper for hp laserjet pro 200 color mfp m276nw tray

  Is there an extra tray for the m276nw

  Sorry, the input tray 150 standard page is only available for the HP Laserjet Pro 200 m276nw Color MFP tray.

• More great update for Dimension 8250 desktop hard drive

  I have a desktop Dell Dimension 8250, BIOS A01, running Windows XP Home Edition (SP2) with 512 MB of RAM and a 120 GB EIDE internal hard drive.  I would replace this hard drive with a larger one.  Can someone tell me what is the largest disk that can be greeted by my computer?

  Thank you!

  TAH

  
  

• What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  I'm running an integrator system Windows 7 64 bit on an older system. What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  Original title: Windows 7 OEM System Builder

  I'm running an integrator system Windows 7 64 bit on an older system. What I would do is change the hard drives for some more great and maybe change the CPU. Is it possible to re - install the generator in system because I'm not changing the motherboard?

  Yes, you can reinstall Windows 7 OEM System Builder License on the new hard drive with the new processor.

  It will not be a problem in this case, since you don't "move" installation, you are doing a new installation. The less it will take is activation of the phone, as you change the hard drive:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• How to pre-order carrier free/unlocked iphone 7 more, pre order page his not giving an option for that.

  Hello. I wanted to buy an iphone 7 more factory unlocked. I'm going out of country next month so I have to use outside of US. I tried pre order but it is asking for my carrier, (I use Tmobile but I have to use this cell phone in another country) there is no option for iphone "carrier free/unlocked. How am I supposed to order free iphone carrier?

  7 iPhone more

  You will not have this option until Apple offers it. It should happen fast enough, but no specific timetable.

  Good luck

  GB

• Laptop: how to make my laptop for one SSD

  Hey everybody,

  I would spend my hard drive of the laptop to an SSD, what are some of the things that I should look for to upgrade successfully, and this may affect my 10 Windows license?

  Thank you

  Bill

  For some people, upgrade a laptop to an SSD can be like diving into the deep end of a pool.

  An SSD upgrade may involve extensive disassembly of your laptop, depending on the model.

  Some models have hard disks that are easier to access than others.

  There are the small, but important detail involving accepting the risk of damaging your computer laptop and breach of warranty.

  You will need to decide if you want to migrate your operating system to the new SSD or perform a new installation of Windows.

  If you have already upgraded the operating system of the Windows 10 laptop, your laptop will have a digital entitlement on license of Windows servers.

  It's the new Microsoft license model that makes a continuous activation of the operating system.

  As part of the installation where you see a box to put the 25 character license activation key, there is a link below that says, I don't have a key.

  

  That's what you need to click to continue installation.

  The type of SSD that will be compatible with your laptop depends on some things.

  The first is how your laptop comes to market.

  The second is that your laptop is an entry level or a top model with advanced features.

  The third is based on these interfaces on the card system of your laptop.

  Your laptop may have only SATA ports or it may also have an m2 or a mini PCIe connector.

  Older notebooks (before 2009) will have only 2.5 possible SATA SSD products as an SSD upgrade option.

  It is also dependent on the interface this SSD on your laptop system board and the type of memory and the controller from that your laptop is compatible.

  Which can be determined in several ways.

  The easiest way I know is to take the guesswork out of the purchase of upgrade.

  Which can be done using the information for one SSD manufacturer whose reputation is based on the provision of accurate information to potential customers.

  Check online on the Web from Crucial.com website to see what they offer as guaranteed products compatible SSD for your notebook.

  With the newer models which are eventually provided with SSD, the Maintenance and Service of Guide disks for each laptop will usually specify what memory and type of SSD drive is compatible.

  The Service Guide which has this information and maintenance lies in the support for your laptop computer portal in the section user guide.

  Use the product number of your laptop + support as keywords in a Google or other search engine search for the portal.

  Memory Crucial site is a great place to find compatible SSD products for your laptop.

  http://www.crucial.com/

  Should what brand of SSD I consider? Take a look at the following article.

  http://thewirecutter.com/reviews/best-SSDS/

  Types of memory SSD
  https://HiTech-us.com/articles/entry/241/SSD-memory-types.-what-to-choose

  Some portable model year 2015 and current high-end and ultrabooks are compatible with SSD NVMe m2.

  They are currently the fastest type of the available SSD.

  This is the, M.2 compatible computers laptops HP lists to third party sites.

  http://laptopmedia.com/laptop-m-2-ngff-SSD-compatibility-list/

  http://www.mydigitaldiscount.com/m.2-ngff-SSD-compatibility-list.html

  The following URL is a list of laptops compatible with mSATA SSDs.http://www.mydigitaldiscount.com/msata-ssd-compatability-list.html#HP-laptop

  Cloning utilities, such as the magician of Samsung, From Paragon Software migration OS 4.0 SSD and EZ GIG IV of apricot you will reduce the volume on the disk inherited to fit on your new SSD.

  USB cable to SATA 2.5 "SATA SSD

  

  You may be one of the lucky ones who installed the SSD and boots for the installer and everything is going as planned.

  Otherwise, it may not be recognized by the installer of Windows or the BIOS.

  Often, an SSD should be prepared before use.

  Many members frustrated author here threads in the forums after having this experience.

  Hold down the Windows key and press the X key.

  Who calls on a menu.

  Choose command-line (Admin).

  Type DiskPart and press to enter.

  Who calls the DiskPart utility.

  After the SSD has been prepared and installation began, the Windows Installer will change the drive letter to C: on its own.

  In the image below, the disks 2 and 3 are Samsung m2 NVMe SSD.

  Some laptops 17 inches come with more than one disk.

  Select the disk and using the command list is very important. If not, you could erase the content and the partitions of the disk with the clean command wrong.

  If the SSD has a GPT partition and a drive letter is assigned, it will be recognized by Windows install.

  

  Once the SSD has been established, you can start at your choice of media for a clean install, cloning of the OS migration or a resumption of the plant initiated by the use of the recovery media, that you created.

  Since 2012, computers laptops were shipped with BIOS, UEFI and GPT partitioned the disk rather than the old BIOS and MBR partition style.

  This means that you are using Windows install must also be to format GPT UEFI.

  There are free utilities available, such as RUFUS, which can be used with ISO created by Media 10 Microsoft Windows creation tool to create an installer of 10 Windows USB UEFI.

  For other versions of Windows RUFUS can also be used to create the type of installer of your choice.

  Cloning of your SSD for a Samsung 950 m2 Pro NVMe SSD using the software of Samsung Migration

• Hiding HP ENVY 15 t-j000 Quad Edition w/SSD and hybrid propulsion system. Swap disk for one SSD Question.

  Hi all!

  I bought the HP ENVY 15 t-j000 Quad Edition and opted for the WSSD 24Go cache as well as the hybrid drive 1 TB. Do I have a problem just buy a kit of cloning and spend the hybrid propulsion system to a full on SSD in the future if I choose to?

  I did some research but I can't isolate an answer if yes or no I might encounter problems on account of the Intel RST be "associated" with the traditional HARD drive caching.

  So I wonder if I can't just simply disable acceleration of RST, clone HARD drive for an SSD via a cloning kit, remove the HARD and the SSD drive and call it a day?

  Any help with this is appreciated!

  Purgingomen wrote:

  Thanks for the info but I was even more so, I was wondering if I would have a problem Exchange with a new SSD hybrid drive later by cloning.

  I thought that I would stick with the 8 GB of RAM and WSSD combo of cache/HDD for now and sometimes down the line (as in a year or two) to get rid of the HARD drive for a full on SSD, disable caching and at the same time move to 16 GB of RAM.

  But I don't know if yes or no the WSSD cache/HDD combo makes it difficult to clone and swap the HARD drive and then just leave the disc of "cache" of 24 gigas (which is more a cache drive) there to be upgraded later.

  -Rob

  Well, I think a pure 2.5 "SSD should work on the system but make sure the cache is removed. For the purposes of cloning, I suggest using the DD command:

  http://en.Wikipedia.org/wiki/DD _ (Unix)

• BlackBerry Smartphones Ringtones and the Notification Options for SMS text phone

  I can't locate the profile of notification area (by following the instructions in the guide) on my "BOLD" to change the ringtone for phone and notification options for calls and texts in and out of the Holster.  I go to application Options, but there is no section for phone or SMS texts and not even in the Advanced Options section.  I remember correctly, I was able to make these changes in the application of profiles under subsection advanced... but not on the "BOLD". In addition, I somehow deleted my phone icon application when I hide and rearrange my icons.  Any advice would be greatly appreciated.

  Go to the menu, profiles, scroll to the tip, press on in normal conditions (or which one is active), and you have the chance to change ringtones for phone, sms text, email and more.

  For the phone icon, switch between topics (menu, options, themes and switch to another and do the same to the ones you use) and check if you have the item on the screen, (you don't need the phone icon, press the green button and is exactly the same function)

• For a recent funeral where the mourners were mourners came from far and from all directions, I wanted to tag a photo of a card to send an email to allow them to find the crematorium (GPS was not an option for most!). This has resulted in

  For a recent funeral where the mourners were mourners came from far and from all directions, I wanted to tag a photo of a card to send an email to allow them to find the crematorium (GPS was not an option for most!). This has led many dotted lines of drawing and my usual 'technical fudge' draw a regular straight line then DAB the brush with the approximate background color at a regular interval would not be easy with the number of lines to draw. I look in vain for an option for me to do and was about to return to my "fudge" when I found the features of Style / dotted. Asked me if I wanted to replace the current Styles with those of dotted styles. Thas here no explanation of what he meant-Nevertheless, I selected Yes. My first line 'test' was off the card and several pixels wide I would have used - it was released as a sort of cross between an old 1960s DP Punch tape and an offset miniature piano keyboard. Clear and straight to the Styles/Reset Styles, I chose to replace the default style, thinking to be the inverse of the previous question. No luck - two months later, I can't yet draw a regular straight line. Outside re - install, how to return to where I was? I use Photoshop CS4 11.0 er

  Ianjalex

  On the tool Options bar, right click (Cmd + click on Mac, if I recall) button (far left) of the tool presets > reset all tools.

  You'd probably want to chart a path to achieve what you want (with dotted lines). Google or Bing "shot on way photoshop cs4" for more details.

• Change the default options for a NEW virtual machine in ESXI 5.1

  Hello

  I am looking for a solution change the 'default' options for a new virtual machine created in ESXI 5.1

  I want to have parameters such as 'cpu/memory HOT-add' default to enabled instead of disabled.

  There may be more options to change to a new virtual machine.

  All those who have an option to change the 'default' options for new virtual machines?

  THX

  You can change the/etc/vmware/config of vSphere host file and add the lines mem.hotadd = 'TRUE' and vcpu.hotadd = 'TRUE '.
  The settings then apply to any VM on this host when virtual machines are turned on...

  I just tried this on a 5.1 ESXi host and it seems to work perfectly...

  / Rubeck

• How to make a great show for the photos

  I want pictures to appear in a great show if you klick on them.

  But I can't find an instruction for what he...

  Can someone help me?

  You can do this with Widgets, for example with the blank publication (Windows > library Widgets > Compositions)
  

  1. Drag and drop the blank publication to your page.
  2. Then select the thumbnails (triggers) and fill it with content, you can change the color of background and outline of the people. You can move the triggers by double-clicking on them and then dragging them into position.
  3. Whenever you select a trigger of the larger target area is visible, you can insert larger images in this area and change the color background and outline of it.
  4. To hide larger images and do only appear when you click the small triggers, select the Widge on the page, and then click the blue arrow. This will display the options for the widget.

  

  I hope this helps. For more information on the use of Widgets, also see:

  Using widgets | Adobe Muse CC tutorials

  Good luck, hope this helps.

  CARI

• Options of the SSD in late 2013 Mac Pro update?

  Options of the SSD in late 2013 Mac Pro update?

  Mac Pro has 256 GB which is almost full despite the displacement of all the large files (Photos, downloads, etc.) out of the disc. I'm at a point where the Player update seems to be a must.

  OWC option seems a bit of a hack using a slower drive and a controller.

  https://eShop.MacSales.com/shop/SSD/OWC/Mac-Pro/2013

  MCETECH claims to use a new disk allowed Apple with trim shoring and the ability of bootcamp to use Windows (important to me).

  http://store.mcetech.com/mm/merchant.MVC?Store_Code=MTOs & Screen = prod & Product_Cod e = 1TBPCIESSD-MP13

  There are eBay sellers who claim to use the running game in recent versions of the end of 2013 Mac Pro.

  http://www.eBay.com/ITM/new-Apple-Samsung-1TB-PCIe-SSD-MacBook-Pro-iMac-MacPro-L ate-2013-2015-SSUBX-/ 151605593746

  and

  http://www.eBay.com/ITM/new-Apple-Mac-Pro-late-2013-1TB-PCIe-SSD-Flash-storage-M Z-KPV1T0R-0A1-605-00108/351601210482?_trksid=p2047675.c100005.m1851 & _trkparms = AI d 3% D 222007% 26algo % 3DSIC. MBE % 26ao %3 D 1% 26asc %3 D 38804% 26meid % 3Dff768b1c384b46d68010 bf8050452542% 26pid %3 D 100005% 26rk %3 D 4% 26rkt %3 D 6% 26sd %3 D 151605593746 & rt = nc

  two sellers have a very high rating, but I don't trust eBay.

  The MCETECH seems to ensure ongoing compatibility as it is a part of Apple.

  Any ideas or experiences with the above or other good known options?

  OWC option seems a bit of a hack using a slower drive and a controller.

  https://eShop.MacSales.com/shop/SSD/OWC/Mac-Pro/2013

  I think you're bad read the OWC page. They propose to replace the internal SSD stick with their largest capacity SSD stick. The external box is only for you to continue to use the original USB key (perfect condition) as an external drive, if you wish.

• When I click with the right button of the mouse on videos from facebook it shows no options for me to copy the link and etc.

  When I click with the right button of the mouse on videos from facebook it shows no options for me to copy the link and etc. It only shows the parameters for the flash player. How can I fix?

  You can find the URL of the thumbnail by following these steps:
  In the context menu, choose {inspect element}.
  Now, you can see the URL in the source down (perhaps you click the small arrow to the left of the line of seledted firstly to show).