Error! : duplicate definition

Similar Questions

• error "duplicate definition of the function.

  How can I change the code below to avoid an error?

  It gives me an error "duplicate function definition. Of course, I learn fast enough and little error.

  thumpy.addEventListerner (MouseEvent.CLICK, onClick);

  function onClick(evt:MouseEvent):void {}

  var url: String = " " http://www.thumpersf.com '; '.

  var req:URLRequest = new URLRequest (url);

  navigateToURL (req, "_blank");

  }

  You are right about the two lines is necessary.  One involves the transfer of the event listener with the identification of the function of Manager in it:

  humpy.addEventListener (MouseEvent.CLICK, onClick);

  and the other is the actual event handler function

  function onClick (...

  The duplication error will arise when you have two functions sharing the same name...

  function onClick (...

  function onClick (...

  Unfortunately I do not see the history of the display when writing, so I don't know if it is possible that some other functions were duplicated, rather than that which is currently focused on until now.

  To answer your original question and rule the entrance/exit or not that code is the problem, change the code as follows:

  thumpy.addEventListener (MouseEvent.CLICK, clickThumpy);

  function clickThumpy(evt:MouseEvent):void {}

  var url: String = ""http://www.thumpersf.com "; "

  var req:URLRequest = new URLRequest (url);

  navigateToURL (req, "_blank");

  }

  (Don't sweat short-circuit the code...) If you're new to AS3, it is better to learn it realizing that there are three distinct parts to bond a URL did you watch... you can drive with one hand after completing some experiments using two)

• Error! : duplicate definition for 'org.kxml2.io.KXmlParser '.

  Hi all

  Below I have attached my code using KSoap2.

  The following error message get up when I run the project.

  ".. \lib\kxml2-min-2.3.0.jar(org/kxml2/IO/KXmlParser.class): error! ': duplicate definition for 'org.kxml2.io.KXmlParser', in: org.kxml2.io.KXmlParser.

  I looked in the forums of BB, but I can't solve this problem...

  Please tell me hoe to solve this problem

  package mypackage;
  
  import java.io.InputStream;
  import java.io.OutputStream;
  
  import javax.microedition.io.Connector;
  import javax.microedition.io.HttpConnection;
  
  import org.ksoap2.SoapEnvelope;
  import org.ksoap2.serialization.SoapObject;
  import org.ksoap2.serialization.SoapSerializationEnvelope;
  import org.kxml2.io.KXmlParser;
  import org.xmlpull.v1.XmlPullParser;
  
  import net.rim.device.api.compress.GZIPOutputStream;
  import net.rim.device.api.system.CoverageInfo;
  import net.rim.device.api.system.WLANInfo;
  import net.rim.device.api.ui.Field;
  import net.rim.device.api.ui.FieldChangeListener;
  import net.rim.device.api.ui.component.ButtonField;
  import net.rim.device.api.ui.component.Dialog;
  import net.rim.device.api.ui.container.MainScreen;
  
  /**
   * A class extending the MainScreen class, which provides default standard
   * behavior for BlackBerry GUI applications.
   */
  public final class MyScreen extends MainScreen
  {
      /**
       * Creates a new MyScreen object
       */
      public MyScreen()
      {
          // Set the displayed title of the screen
          setTitle("MyTitle");
          ButtonField bf = new ButtonField();
          add(bf);
          BenoListener benoListener = new BenoListener();
          bf.setChangeListener(benoListener);
      }
  
      public class BenoListener implements FieldChangeListener {
          public void fieldChanged(Field field, int context) {
              try {
                  String serviceNamespace = "http://www.google.com/Services/google/";
                  String soapAction = "http://www.google.com/Services/google/Login";
                  String methodName= "Login";
                  String result = "";
                  String begin = ""
                          + "http://www.w3.org/2001/XMLSchema-instance\" xmlns:xsd=\"http://www.w3.org/2001/XMLSchema\" xmlns:soap=\"http://schemas.xmlsoap.org/soap/envelope/\">"
                          + "";
                  String end = "" + "";
                  String soapBody =begin;
                  soapBody += "http://www.google.com/Services/google\">";
                  soapBody += "";
                  soapBody += "[email protected]";
                  soapBody += "";
                  soapBody += "";
                  soapBody += "12345678";
                  soapBody += "";
                  soapBody += "";
                  soapBody += end;
                  SoapObject rpc = new SoapObject(serviceNamespace, methodName);
                  SoapSerializationEnvelope envelope = new SoapSerializationEnvelope(SoapEnvelope.VER11);
                  envelope.encodingStyle = SoapSerializationEnvelope.ENC;
                  HttpConnection connection = (HttpConnection) Connector.open("https://services.google.com:8443/axis2/services/api/V1.0/GoogleServices"+ getConnectionParameter(),Connector.READ_WRITE);
                  connection.setRequestProperty("SOAPAction", soapAction);
                  connection.setRequestProperty("Content-Type", "application/x-gzip");
                  connection.setRequestProperty("Content-Encoding", "gzip");
                  connection.setRequestProperty("Accept-Encoding", "gzip");
                  connection.setRequestProperty("Content-Length","" + soapBody.getBytes().length);
                  connection.setRequestProperty("User-Agent", "kSOAP/2.0");
                  connection.setRequestMethod(HttpConnection.POST);
                  OutputStream os = connection.openOutputStream();
  
                  zipRequest(os, soapBody);
  //              os.write(soapBody.getBytes(), 0, soapBody.getBytes().length);
  //              os.close();
                  soapBody = null;
                  InputStream is = connection.openInputStream();
                  XmlPullParser xp = new KXmlParser();
                  xp.setFeature(XmlPullParser.FEATURE_PROCESS_NAMESPACES, true);
                  xp.setInput (is, null);
                  envelope.parse(xp);
                  result = (envelope.getResponse()).toString();
                  Dialog.alert("Result---"+result);
              } catch (Exception ex) {
              }
  
          }
  
          private String getConnectionParameter() {
              String connectionParameter = "";
              if (WLANInfo.getWLANState() == WLANInfo.WLAN_STATE_CONNECTED) {
                  connectionParameter = ";interface=wifi";
              } else {
                  int coverageStatus = CoverageInfo.getCoverageStatus();
                  if ((coverageStatus & CoverageInfo.COVERAGE_MDS) == CoverageInfo.COVERAGE_MDS) {
                      connectionParameter = ";deviceside=false";
                  } else if ((coverageStatus & CoverageInfo.COVERAGE_DIRECT) == CoverageInfo.COVERAGE_DIRECT) {
                      connectionParameter = ";deviceside=true";
                  }
              }
              return connectionParameter;
          }
  
              public void zipRequest(OutputStream io, String data) throws Exception{
                  try{
                      GZIPOutputStream gz = new GZIPOutputStream(io);
                      byte[] bytes = data.getBytes("UTF-8");
                      gz.write(bytes, 0, bytes.length);
                      gz.close();
                  }
                  catch(Exception ex){
                  }
          }
  
  }
  }
  

  I solved this problem of "Preverify" jar

• Error! : duplicate definition for 'org.kobjects.base64.Base64', in: org.kobjects.base64.Base64

  Hi, using ksoap 2 jar, I get following error. Someone can he figure out?

  "Error!: duplicate definition for 'org.kobjects.base64.Base64', in: org.kobjects.base64.Base64 '...

  Maybe you added two libraries with this class? for example ksoap2 and kxml?

• Duplicate definition

  Hello. I get the following message appears when I try to compile and run my project on the BB Simulator.

  Packaging Project ProjectName failed

  Error! : duplicate definition for 'org.kxml2.io.KXmlParser', in: org.kxml2.io.KXmlParser

  Now, it makes sense because I have references to kxml2 - ksoap2-j2me-core-prev - 2.1.2.jar and 2.3.9.jar, which contain the org.kxml2.io.

  My question is simple. How can I get rid of one?

  The two pots contain required files I am looking to just remove the org.kxml2.io of one or the other.

  Thanks in advance.

  Problem solved. Just find the .jar to your hard drive file and rename it so that the extension is .zip. Then from there, you can go and delete all you want.

  Be sure to rename it to .jar.

• widows system error: duplicate name exists on the network

  at startup I get the following: Windows system error: duplicate name on exists on the network, how can I get rid of this?

  Change the name of your computer? See if this helps: http://support.microsoft.com/kb/295017 - B -.
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• Adobe animate CC error 1172: Definition com.adobe.serialization.json:JSON could not be found.

  Hello

  All advice is appreciated.

  I have an AIR for iOS file is previously in Flash Professional CC 2015, with com.adobe.serialization.json.JSON and com.adobe.serialization.json.JSONParseError imported into a folder to parse and decode the JSON string for oauth2 procedure. Since I've upgraded to Adobe animate CC 2015, today when I open the file and I tried to publish the API, it returns the following errors:

  1172: definition com.adobe.serialization.json:JSON could not be found.

  1172: definition com.adobe.serialization.json:JSONParseError could not be found.

  1120: access of undefined property JSON.

  1046: type was not found or is not a compilation constant: JSONParseError.

  1046: type was not found or is not a compilation constant: JSONParseError.

  I don't know what caused it in the new CC animate and how to solve this problem. Please help if you can provide solutions and ideas. Thank you very much!

  Kind regards
  Yu

  This question is already answered here: Adobe animate error 1172: definition com.adobe.serialization.json:JSON could not be found

• Duplicate definition - error during the generation of project

  Hi eveybody,.

  I met a problem when I am developing. I copy the source from a computer code and put it in the new computer, build a new workspace and a new project, and then compile the code.

  It can pass all the verification code, but it built like this:

  Sorry to answer that for myself...

  I think it's because I add a few files such as *.rapc and * .debug. that is causing the problem.

  I remove and build well.

• Windows Update not working do not Error Message and Windows Defender cannot update Error Message definitions

  I have a laptop Dell 1501 with Vista Home Basic 32-bit.

  I ran CA 2010 Security Suite and you have scanned for Malware with regard to the Windows Update Error Message. He found none. I ran Microsoft Malware malicious tool, and it found. I ran Windows Defender and he found. I don't have CA and Windows Firewall to protect my computer and I have disabled both in trying to solve this problem of Windows Update and Windows Defender.

  I got this error 4 days ago. Here is what I tried:

  -I went on various Web sites, including Microsoft Support - and tried to solve the problem through services.msc and msconfig.exe. None worked.

  -J' noticed in msconfig. where it says start waiting next to Windows Update. There are 3-4 elements, which are affiliated to Windows Update and made sure they did not exist in the registry.

  -J' have to ensure that they were supposed to be automatic or manual under services.msc.

  -J' rebooted several times and nothing changes.

  Windows Defender does not update the definitions, and I do not know if this coincides with the release of Windows does not.

  I am at my wit's end and do not want to crash and burn my computer.

  I need serious help. Please, I beg you!

  Thank you.

  LRR100

  I had to call Microsoft. Alex tried to add registry keys and input upgrade.

  My Windows Update has almost been altered. It could be my mistake or it has become corrupted when running other services at the same time.

  I was sent a Windows 7 Home Premium Disc to upgrade and start over, as my Vista disk was corrupted as well.

  I would not recommend trying one of the suggestions listed on other sites. It's my personal opinion because I have in the past and it worsened my problem.

  I also wouldn't delete all programs (unless absolutely necessary) because I remove 4 MSMXL and he made their work more difficult.

  ________________________________________________________________________________________________________________________________

  Sometimes the only solution is to call Microsoft and they will evaluate if a charge of telephone support is necessary from the outset, before they run for your problem.

  Despite what you may have read, Microsoft Technical Support technicians are very efficient and kind.

  We inform you to open a slot during your day or even open your day for the problem to be solved.

  Mine took 2 1/2 hours, and they had to remind me the next day to make the order for the disk because it could not be done the same day.

  The more patient and kind you are, the best representative.

  Hope this helps and thanks for reading,.

  LRR100

• Adobe Animate error 1172: Definition com.adobe.serialization.json:JSON could not be found

  Hello

  All advice is appreciated.

  I have an AIR for iOS file is previously in Flash Professional CC 2015, with com.adobe.serialization.json.JSON and com.adobe.serialization.json.JSONParseError imported into a folder to parse and decode the JSON string for oauth2 procedure. Since I've upgraded to Adobe animate CC 2015, today when I open the file and I tried to publish the API, it returns the following errors:

  1172: definition com.adobe.serialization.json:JSON could not be found.

  1172: definition com.adobe.serialization.json:JSONParseError could not be found.

  1120: access of undefined property JSON.

  1046: type was not found or is not a compilation constant: JSONParseError.

  1046: type was not found or is not a compilation constant: JSONParseError.

  I don't know what caused it in the new CC animate and how to solve this problem. Please help if you can provide solutions and ideas. Thank you very much!

  Kind regards
  Yu

  The serialization code was one extra thing that you have a point. If you find these files (adobe/serialization/json and so forth) you should be able to put them in your project, and once again things would be ok.

  But you should think about not doing it. There are these routines were made native AS3 code and now work a lot faster.  Here is the documentation for the native:

  JSON - Adobe ActionScript® 3 (AS3) QAnywhere

• The ID of the table error duplicate

  Hello

  When I try to add an Array Manager, I get an error of "Table duplicate ID 'xxxxxx'" and I can not add the Bay Manager. I uninstalled and reinstalled SRM and still get the same error. Someone at - he seen this before?

  Thank you

  Hello

  Found the answer to this. There was a problem with the table IDs to the Compellent Enterprise Manager.

  Thank you.

• Error deploying definition search in PeopleSoft HCM 9.2

  Hi guys,.

  Today I try to configure ITS with my Peoplesoft. When I try to deploy the definition of research. I got this error " " ""

  PeopleCode compilation error (AddQueryFieldDefaultValueExpression is not a method of class CQRuntime. ((2.52) ^ PPT) for the PTSF_FEED program. SESFeedDataSource.OnExecute. (2 405)

  A PeopleCode program for the specified reference failed compile correctly for the given reason.

  In application designer, open the referenced program and examine the PeopleCode to locate the cause of the error. »

  Suggest this problem?

  Before thanks for your response.

  As indicated in the following doc, this problem has been fixed in PeopleTools 8.53.04 patch

  E ITS: deployment search definition with PeopleTools 8.53 and Oracle SES 11.1.2.2.0 problems [ID 1558997.1]

• the database error duplicate from one server to another server

  Hello
  
  I'm practicing duplicate database to a single database server to another server. Path material and pilot on 2 machines is the same. Here are my steps:
  -Clone site:
  1 change the listener.ora with content:
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain) (PORT = 1521))
  )
  )
  
  ADR_BASE_LISTENER = / u01/app/oracle
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (GLOBAL_DBNAME = orcl)
  (ORACLE_HOME = u01/app/oracle/product/11.2.0/db_1)
  (SID_NAME = orcl)
  )
  )
  ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER = WE
  2. stop and start receiving once again, show message as:
  Service "orcl" has 1 instance (s).
  Instance "orcl", status UNKNOWN, has 1 operation for this service...
  
  The command completed successfully
  3. create pfile from spfile file.
  4. stop and startup nomount with pfile is new pfile create in step 3.
  --------------------------------------- Source site
  1 edit tnsnames.ora with content like:
  VVCOREDB =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost.localdomain) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = vvcoredb)
  )
  )
  
  ORCL =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 10.254.1.235) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orcl)
  )
  )
  2 run the command of rman like these:
  RMAN > Connect target sys@vvcoredb
  RMAN > target password database:
  RMAN > Connect auxiliary sys@orcl
  RMAN > database auxiliary password:
  RMAN > DUPLICATE TARGET DATABASE for database orcl active spfile nofilenamecheck.
  
  Then the result show below:
  From Db double to 24-SEP-12
  using the control file of the target instead of recovery catalog database
  allocated channel: ORA_AUX_DISK_1
  channel ORA_AUX_DISK_1: SID = 63 type device = DISK
  
  content of Script memory:
  {
  backup that copy reuse
  TargetFile ' / u01/app/oracle/product/11.2.0/db_1/dbs/spfilevvcoredb.ora' auxiliary format
  ' / u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora';
  clone of SQL 'alter system set spfile = "/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora";
  }
  execution of Script memory
  
  Backup to starting 24-SEP-12
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = 74 type device = DISK
  Backup finished 24-SEP-12
  
  SQL statement: alter system set spfile = "/u01/app/oracle/product/11.2.0/db_1/dbs/spfileorcl.ora"
  
  content of Script memory:
  {
  clone of SQL 'alter system set = db_name
  "ORCL" comment =
  "reproduce" scope = spfile;
  clone to stop immediately;
  startup nomount clone;
  }
  execution of Script memory
  
  SQL statement: alter system db_name set = comment "ORCL" = "duplicate" scope = spfile
  
  Instance Oracle to close
  
  connected to the auxiliary database (not started)
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Db in dual at 24/09/2012 17:44:12
  RMAN-03015: an error has occurred in the script stored memory Script
  RMAN-04014: failed to start: ORA-01261: parameter db_recovery_file_dest destination string cannot be translated
  ORA-01262: Stat failed on a destination of the file directory
  Linux-x86_64 error: 2: no such file or directory
  
  I don't know what wrong with my pfile file? I said to correct my pfile site clone like this:
  ORCL.__db_cache_size = 1476395008
  ORCL.__java_pool_size = 16777216
  ORCL.__large_pool_size = 16777216
  ORCL.__oracle_base='/U01/app/oracle'#ORACLE_BASE the value of the environment
  ORCL.__pga_aggregate_target = 1342177280
  ORCL.__sga_target = 1979711488
  ORCL.__shared_io_pool_size = 0
  ORCL.__shared_pool_size = 436207616
  ORCL.__streams_pool_size = 0
  *.audit_file_dest='/U01/app/Oracle/admin/ORCL/adump '
  * .audit_trail = "db".
  * full = '11.2.0.0.0'
  *.control_files='/u01/app/oracle/oradata/orcl/control01.ctl','/u01/app/oracle/flash_recovery_area/orcl/control02.ctl'
  * .db_block_size = 8192
  * .db_domain = "
  * .db_name = "orcl".
  *.db_recovery_file_dest='/U01/app/Oracle/flash_recovery_area/vvcoredb '
  * .db_recovery_file_dest_size = 4070572032
  *.diagnostic_dest='/U01/app/Oracle '
  *. Dispatchers ='(Protocol=TCP) (SERVICE = orclXDB)"
  * .memory_target = 3313500160
  * .open_cursors = 300
  * runoff = 150
  * .remote_login_passwordfile = "EXCLUSIVE."
  * .undo_tablespace = "UNDOTBS1.
  
  Please suggest me I miss some steps when trying to duplicate database?
  
  Any suggestions are welcome.
  
  Thanks in advance!
  
  P/s: sorry for my bad English.

  This error is because the location of the controlfile specified in your spfile is not present on your server to clone. Change the location of the parameter cntrolfile in spfil or create the same location on the server.

  Published by: Slim on 24 Sep 2012 17:47

• ERROR DUPLICATE COLUMN NAME

  I get an error of duplicate column name to submit using automatic processing of line.
  
  I have a few items on the page with the same column name, but they appear under certain conditions. Even if I put in them NEVER occurs again.
  
  I would understand that you still can't duplicate names even if the elements are conditional?
  
  If this is the case, then Ill have to do with javascript or something. Pain cos apart from that, my form is quite clean
  
  Thanks for the help of anyones :-)
  
  Colin

  Since your sql does not deal with conditional columns, you don't CAN NOT use the same column name several times... Unless you write your own DML to manage updates/inserts & removes...

  Thank you

  Tony Miller
  Webster, TX

• 10.3 workspace error: same definition label for pages multiple .portal file

  Hello
  
  We apply unique Internet portal with three files .portal. The page label and the book definition for books pages are the same on all three .portal. This was done for re-use, because the underlying code base functional is the same for all three .portals.
  
  It was great working on weblogic 8.1.We are now trying to port it in weblogic 10.3, but construction did not reach 10.3 workspace studio, complain of the same label definition page/book existing in all three .portal.
  
  (1) why is 10.3 considering this as a mistake?
  
  (2) how is it possible to get rid of these errors? The server will complain also mistakes, or is it due to some restrictions on the studio 10.3 workspace?
  
  Help, please.
  
  Thank you

  Glad that helped! Here is the external link to the section of the portal development guide that explains the objets.book/.page and how to use them in your .portal.

  http://download.Oracle.com/docs/CD/E13155_01/WLP/docs103/portals/develop_portals.html#wp1011957