More than 2 GB of Ram on Qosmio G20 (PQG20E)?

I tried to install 4 GB of Ram on a G20-106, but not even the BIOS load. BIOS version more recent (v1.40) is running. Is there really a limit of 2 GB on this machine and if so, why?

Hi mate,

Yes, the machine is capable of managing the 2 GB of RAM because it s a chipset limitation. The chipset is a 915 PM to intel and you can read about the limitation by clicking on the following link: http://www.intel.com/Products/Notebook/Chipsets/915PM/915PM-overview.htm

and checking the "Technical Documents" where the data sheet also indicates a limitation of 2 GB RAM.

Hope I was able to clear your mind. :)

Welcome them

Tags: Toshiba

Similar Questions

  • B310 recognizing no more than 4 GB of Ram

    My B30 acknowledges no more than 4 GB of Ram, although Windows 7 Home Premium 64-bit and the motherboard maximum of 8GB.

    The link here confirms it:

    http://forums.Lenovo.com/T5/IdeaCentre-desktops-home-servers/processor-change/m-p/1070365/highlight/...

    Someone at - it a solution?

    Reinserted memory sticks and alls fine now :-)

  • Satellite L40-12 X - more than 2 GB of RAM?

    Hello
    I was wondering if there is any solution how to enable the support of more than 2 GB of RAM on laptop Satellite L40 12 X? I'm running Vista 32 bit, but each additional MB account...

    Jérôme

    Hello

    You already use the max RAM. It is based on the chip set. For Intel 943GML is 2 GB maximum RAM, you can use.
    I'm sorry.

  • Allow the use of more than 4 GB of RAM on 32-bit Windows

    Hello, I am running Windows 7 32 bit on a computer that has more than 4 GB of RAM (10 GB to be exact), but I understand that Windows 7 32 bits by default can only use 4 GB of RAM. My processor No. Execute (Data Execution Prevention) active and PAE (physical address Extension) also active. Although it seems that EAP is that the rest of my RAM visible and not usable (which makes me question why something as useless as that would be understood as a feature). Is there anyway I can get Windows 7 is therefore able to use all of my RAM? I would prefer a solution that won't let my totally unstable system but nothing will work.

    Hello, I am running Windows 7 32 bit on a computer that has more than 4 GB of RAM (10 GB to be exact), but I understand that Windows 7 32 bits by default can only use 4 GB of RAM. My processor No. Execute (Data Execution Prevention) active and PAE (physical address Extension) also active. Although it seems that EAP is that the rest of my RAM visible and not usable (which makes me question why something as useless as that would be understood as a feature). Is there anyway I can get Windows 7 is therefore able to use all of my RAM? I would prefer a solution that won't let my totally unstable system but nothing will work.

    Hi tjratis20,

    The link below will give you a pretty good idea what exactly the EAP.

    https://msdn.Microsoft.com/en-us/library/Windows/desktop/aa366796 (v = vs. 85) .aspx

    Upgrading to a 64-bit operating system would increase significantly the amount of memory available. See the link for Windows memory limits below.

    https://msdn.Microsoft.com/en-us/library/Windows/desktop/aa366778 (v = vs. 85) .aspx

  • Adding more than 4 GB of RAM to a VM Server 2008 32-bit

    Hi, can you tell me if it is possible for a Server 2008 Standard 32-bit VM for more than 4 GB of RAM? I activated the EAP, but it made no difference. Is there something specific that needs to be done as is a virtual machine?

    This is a Limitation of Windows

    Even with active EAP 4 GB maximum on 32 bits, see insert from the link:

    http://msdn.Microsoft.com/en-us/library/Windows/desktop/aa366778 (v = vs. 85) .aspx #physical_memory_limits_windows_server_2008

    Please allow points to useful/correct answers

  • Can I add more than 4 GB of RAM for my 37 s Inspiron from Dell?

    I am running Windows Vista Home 64 bit. My computer is now about four years old, but I don't have the money to drop on a brand new computer. However, I found a graphics card that must adapt to the inside and the race (it was recommended to the user who is running a system like mine on another post on the forum). Now, I just need a RAM upgrade, because I do not think that 4 GB enough for me anymore. Once I update the graphics that I intend using this PC mainly for gaming. I did my research and I think that if I upgrade the graphics and RAM, I should be able to do what I want to do with this computer. Ideally, I would switch to 8 GB of RAM, but I'll settle for 6 GB. I just need to know if it is possible to operate this computer with more than 4 GB of RAM, because I've not heard elsewhere.

    It is not a model 37 s, but if you mean the 537 s, the maxium of RAM is 4 GB. http://www.crucial.com/store/listparts.aspx?model=Inspiron%20537s&cat=RAM

  • What happens if you put more than 16 GB of ram in an iMac 2011?

    Hello

    I just bought two cards of 8 GB of RAM, which gives me a total of 16. Apple says it's 2011 limit of the iMac, but I still have more than two dwellings and two maps of RAM of 2 GB that accumulate to a total of 4. So in total, I have 20 GB of RAM. So my question is, what do I do if I put all the 20 GB on my iMac? Would it be correct? It would start? He would kill it?

    Sorry if my question is confusing!

    Thank you!

    Depending on the tool Advisor in memory in Crucial , you can have up to 32 GB. The RAM sticks installed in pairs are the best.

  • HP Paviillion g6 2230tx what happens if more than 8 GB of ram?

    Hello
    I have HP Pavilion 2230tx g6. I bought laptop with 4 GB of RAM (1 x 4). Then I switch to 8 GB (2 x 4). I heard that this model can use no more then 8 GB of RAM. But my question is what happens if I try you put 12 GB (1 x 4, 1 x 8) or 16 GB (2 x 8 or 1 x 16) of RAM? I need more than 8GB to work! Thanks for all the tips and advice!
    PS. Maybe it's patch or update for 2230tx change the max RAM size?

    If it is not visible in the BIOS, then it is the restriction of the BIOS or motherboard - if you have the freedom to test out you can go for that.
    If the config is compatible to the system, Windows will load normally but usable RAM may be 8gigs right even if you load the RAM size more in it.

  • I am not able to access more than 2 GB of RAM under Windows 7 64-bit. How to solve this problem?

    I bought a new laptop - Asus X42JY with 6 GB of RAM. My system properties computer watch 5.86 GB usable memory. But I can't seem to access more than 2 GB. During the use of games and video editing software, they start to get stuck when the piston reaches 2 GB mark. The CPU Gadget even refrigerators up to 34% of RAM. How can I solve this problem?

    Hello

    Thanks for the reply.

    You can read these articles and check if that helps.

    Diagnosing memory problems on your computer: http://windows.microsoft.com/en-US/windows7/Diagnosing-memory-problems-on-your-computer

    Limits of memory for Windows versions: http://msdn.microsoft.com/en-us/library/windows/desktop/aa366778(v=vs.85).aspx #physical_memory_limits_windows_7

    Usable memory may be less than the memory installed on Windows 7 computers: http://support.microsoft.com/kb/978610

    Let us know if you need assistance with any windows problem. We will be happy to help you.

  • Can I have my HP mini 210-2080NR updated with more than 1 GB of RAM it came with?

    I have a HP mini 210-2080NR. I would really like the amount of RAM upgraded fom the he arrived with more than 1 GB. Is this possible and if so, how it will manage?

    Hello

    Yes you can, you can upgrade to 2 GB and because she has only 1 slot you have to throw 1 GB and 2 GB, put on it. I replaced the RAM for my daughter about 2 months back. He encrypted his 28 our Australian dollars and 5 minutes of my time.

    Kind regards

  • First elements 14 accidents system Win7 and acquires more than 8 GB of RAM when opening a project (48 clamps, 6 min on the timeline). Is there a solution?

    First elements acquires more than the 8 GB of RAM, I have in my computer, loading my project. Project contains 48 clips, the entire video has a length of about 6 min.

    It is often possible to kill ss14 and avoid a reboot of the system, but sometimes only a reboot can solve the lock.

    Sometimes the loading of the project does not exhaust the available RAM, and in these cases the continuation of the work with projects are possible without any RAM problems more (including rendering).

    Is there a solution?

    kirschnw

    What operating system is involved?

    What are the properties of these 48 clips (still images and video, just one or the other)?

    The complexity is the structure of the timeline, and what effects you apply for this clips - lots of reduction of stabilization?

    Are exhaust you the virtual as well as physical memory (RAM) in all of this?

    Please provide more details.

    Thank you.

    RTA

  • ESXi 5 for host with more than 32 GB of RAM

    Hello, Dear Sirs!

    I'm tempted vmware ESXi 5 on our small server and it works fine (server has 16 GB of RAM). Thank you!

    Now, we decided to perform a small upgrade and increase RAM, say, up to about 90 GB.

    I hear a guy (and also various discussions here and there, applied to different versions of ESXi and ESX) this license free (but still required registration) of ESXi allow only up to 32 GB of RAM. Is this true for the 5th version of ESXi. In other places (like http://blogs.vmware.com/vsphere/2009/06/esxi-vs-esx-a-comparison-of-features.html), this information do not confirmed.

    If this is the case, we would like to purchase a license. But here, I stuck too: what type of license do we choose?

    I am confused with vSphere, vCenter, and many other things, never tried they...

    It seems like we don't have that one server, so I guess we are a staff of vSphere, do we?

    BTW, there are several processors (as I know) and each of them has several nuclei. Do take effect on the process of choice?

    Thank you very much!

    Sergei Petrunin

    Welcome to the community,

    For the current licenses, see http://www.vmware.com/files/pdf/vsphere_pricing.pdf

    Free hypervisor is indeed limited to 32 GB of physical memory, while all the other editions (paying) are licensed per processor/socket, without any limitation on the hearts by taking power or memory. In your case - assuming you ESXi host have not more than 2 Sockets - I suggest that you take a look at the edition of Essentials.

    André

  • Specification of the RAM for Qosmio G20-110

    What spec ram do need me for a Qosmio G20-110?

    Your Qosmio can be upgraded to 2 GB upwards and you can use follow Rams:
    DDR2 400/533 MHz 512 MB (PA3412U - 1 M 51)
    DDR2 400/533 MHz 1 GB (PA3411U-1M1G)

    Good bye

  • What is the maximum RAM on Qosmio G20 - 126

    Hi I looked on the Crucial web site for an upgrade of memory, they report that RAM maximum supported is 2gig (2x1gig) and I was wondering if anyone has tried using 4gig (2x2gig).

    Hello

    According to the specification of your Qosmio G20-126 notebook can handle only with max 2 GB of Ram. With other words: you can use the module of 2 x 1 GB only. I found the info your device comes with 2 x 515 MB. If you want to buy the 1 GB RAM module are compatible one with the PA3411U-1M1G part number.

    Good bye

  • Can I use 4 GB of RAM in Qosmio G20-128

    Hello

    can I install 4 GB of ram with 2 + 2 GB DDR2 kingmax, or the limit is 2 GB in total?
    Thank you

    No, you cannot upgrade the memory to 4 GB.
    The Qosmio G20-128 takes max 2 GB (2 x 1 GB) of memory.

    Best regards

Maybe you are looking for