more than 6 microphone does not work normally

Similar Questions

• How to solve my problem with the microphone?-it does not work normally (his jerky) after application of the reductions of noise/restrictions

  Hi il. I recently installed Adobe Audition7.2 on my windows 8.1 and I noticed the button sound recording from the microphone inside the program is disabled while at the same time, I could record using other programs on my windows. I worked with my AU and eliminate the background of an old audio recorded sample. ((mon micro intégré est donc bruyant) noise) I chose a very noisy place and crossed the effect / noise noise reduction of the restrictions/print capture. And then I went through effect / restrictions/noise reduction noise reduction process and apply the settings. Although it works and my sample file has improved (without noise), I encountered another problem, my mic does not work normally both in AU and other windows software. The recorded sound now go offshore and (rough) while recording. How can I solve the problem?

  I also followed the instructions on this link https://forums.adobe.com/thread/1546014?start=0 & tstart = 0 and installed ASIO4ALL... but this isn't work, the program may not work correctly for me.

  
  

  Thank you for your attention.

  If your microphone is sounding restless that you save (rather), there is problem on your Windows sound settings. As Steve G suggested it sounds like a form of blocking to reduce the noise. I don't know if this is an effect that Windows 8.1 can do to the incoming audio signal. If you find a way to turn it off.

• iPhone 5 s microphone does not work during phone call

  Hello! My iphone 5s works really well, sensors, speaker, camera, all right. Similarly, the microphone works really well when I make a call using 'whassapp', 'line', etc and I can record video, talking to Siri, using voice memo and once more my microphone works really well. BUT! When I make call and receive phone call my microphone does not work, they do not hear my voice at all. What will happen with my microphone when you use the cell phone call? HELP ME PLEASE!

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  If that doesn't work, restore your device to factory settings. Please note that this will delete the data on your device.

  Take a look this Apple Support article: use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo of iTunes on the screen of your device. After that on your computer, you should see the iTunes window saying that your device needs to be restored to factory settings. Click Restore.

  More info here:

  https://support.Apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/

• With the front camera, microphone does not work, but with the camera back, it works fine. Please give me solution

  whenever I have to video chat with anyone with front camera on they won't listen to me. Even when I record with fromt camera microphone does not work with the camera back, everything works correctly and even with siri, I can't talk more but when I take a call they can hear perfectly

  Get help with microphones on your iPhone, iPad and iPod touch...

• Internal microphone does not work in Satellite C850-B377

  The microphone does not work now. It worked very well but immediately stopped.
  Tried setting the sytem for a previous working restore point. But again same problem.
  Realtek is the audio driver installed.

  External Mike works very well.
  Anyone can help with this problem.

  Laptop bought the UNITED Arab Emirates and now in India and its less than 1 year.

  Can I get the service locally in India.

  Hello

  The internal MIC is part of the webcam module.
  What happens if you start the webcam, try saving and small clip? The sound recording is this too?

  Usually, you can change the recording devices in Control Panel-> sound-> recording tab
  Here, you can check what devices are available. Right click and check if hidden and disabled devices can be demonstrated.

  By the way: I had some problems with the playback of the sound after installing the Realtek audio driver. I uninstalled the Realtek audio driver and Device Manager remove the audio display Intel (in games, field audio video controller). In the peripheral zone system you could remove the controller high definition audio.
  Again, restart the laptop.

  Usually, removing devices should be recognized automatically. Then go again to the dashboard-> sound-> recording tab and check if other devices outside external microphone are available.

• Windows7 - Microphone does not work on my Satellite P300

  I just did a clean install of Windows 7 on my laptop & ^ now my microphone does not work. Does anyone know how to fix this please?
  The laptop model is a Satellite P300 22R.

  I already tried to install the drivers for Windows 7 & I think I've done everything, but this doesn't seem to work.
  Also in the center of the action in Windows 7 it always says I have a problem with my ATI graphic drivers. Also, I tried to fix this problem without success.

  You have installed all the drivers following order normal facilities:
  Win7
  Driver Chipsted
  Storage Manager
  Display driver
  Audio driver
  Driver modem
  LAN driver
  WLAN driver
  The Cam driver and so on?

• Satellite L50 - A - 16 H - Webcam + microphone does not work

  Hello

  I have a laptop Satellite L50 - A - 16: updating win8.1 64 bit.
  When I got this new laptop everything worked fine, but later it stopped working.
  I sent it to Toshiba for repair and ofcouse they made and works (the MB has been replaced?), but now, I noticed that my webcam and my microphone does not work. If I try to open the camera it says 'connect a camera' or on Skype, he asks the same thing.

  I read in the forums to look at the BIOS to enable, but there is no activation/deactivation button.
  I tried to search for a driver for the Webcam in the Toshiba site but I couldn't find: c
  and the microphone "working normally" but I when I try to call my friends can't hear me.

  I hope someone can help me with this problem, thank you very much :)

  You know what: best thing you can do as the ultimate test is to backup all your data and reinstall the original recovery image. By default the BIOS settings and install recovery image.
  After ding that you will have to re-buy factory and absolutely identical situation after laptop settings.
  Please test and send feedback.

  In my opinion, if the problem persists it could be hardware related issue. Maybe is cam not connected correctly.

• ThinkPad W530 problem - Microphone does not work do not

  Hello

  My W530 microphone does not work. Whenever any problem try to use (Skype, Audacity), it still shows a quick activity (about 0.5 ms), always with the same- and nothing more, ever.

  I installed the drivers from Realtek and lenovo drivers, nothing works.

  I did said wha in all other forumes (sound-> manage audio devices), - disable listening, disable all the featues or activate, as well as Ministry of the highest available parameters. Nothing helps.

  This has been done since I bought this computer a month ago.

  OS: Windows 7 64-bit

  Help, please

  Hi again, matanm

  At this point, I would contact service customer in Israel, that I can't think of any other software issue which could be responsible for this. It is also reinforced by the fact that the microphone did not work since you bought the machine. The number of support for Israel is + 972-3-531-3900.

  Best,

  Adam

• Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Computer laptop Toshiba Satellite A200, Vista, microphone does not work! Any help please!

  Hello

  Check with Toshiba support, online documentation and drivers (update or reinstall), and
  ask in their forums.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ========================================

  How to activate Audio devices hidden in Vista and Windows 7
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer (you want to be sure
  the mic input is enabled)
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-a-microphone-music-player-or-other-audio-device-to-your-computer

  -----------------------------------------------------------------------------------------------------------------

  Pilots may also need to be updated:

  Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek high definition
  Audio (this is an example and you can have an other name/maker).

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
  and then install the latest version. Restart and check after each test, not
  rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
  installed shows upward on the tab of the driver.
  
  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check see the
  Disconnected devices and show disabled devices - check your micro - highlight
  then on lower right properties. Make sure that the appropriate injector is selected and check
  other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

• microphone does not work hp dv6000

  Hey guys,.

  I have hp dv6000 laptop. The microphone is integrated and it doesn't work. It says that the driver is installed correctly but it is obviously not.

  What should I do?

  Thank you

  Hi yassena,

  Thank you for using Microsoft Windows forum.

  I suggest you all to first download and install Windows 7 driver compatibility.  Check your drivers in the Windows 7 Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx to check if your audio drivers for hp dv6000 are compatible.

  The drivers for your hp dv6000 seem not to be compatible with Windows 7 and this is why I suggest you to download the Windows Vista Compatible drivers from: http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=2093&lc=en&dlc=en&cc=us&lang=en&product=1842155 and running Windows Vista compatibility mode.

  You can also try to adjust the default microphone and check under the sounds in the recording tab.

  It seems that the microphone is not properly configured on your computer. You can try to solve the problems more microphone/line-in following the steps, in order, to test, check the connections and the hardware, update the audio drivers and configure the audio settings of Windows. If you follow these steps in the correct order, you will fix the problem or you will find that the audio software must be configured or updated.

  Step 1: Test of an audio signal

  1. click on start, then Control Panel.
  2. click on hardware and sound and then click on manage audio devices...
  3. click on the recording tab.
  4. to test the microphone, speak into it. To test the line, send a signal to the line at the port of devices audio source (press play on the audio player). Look at the gray bars next to the name of the device under the recording tab:
  * If the gray bars next to the device name turns green, this device is active and an audio signal is passed through the microphone or line-in port. This step shows that this problem is related to sound parameters in the software that uses the microphone. If you have not already done so, set the device selected by default and adjust levels. Once the device is set by default and levels are defined, use and adjust the sound recording or voice carrying software.
  * If the gray bars remain inactive and grey, the device does not have a signal. Leave the record open tab and go to the next step.

  Step 2: Check the volume levels and mute

  The volume of the speaker to the microphone and line - in may be activated or rejected. Use the following steps to check the volume of speaker for line and microphone levels.

  1. click on start and then click Control Panel.
  2. click on hardware and sound.
  3. click on sound.
  4. Select speakers, and then click Properties.
  5. click on the levels tab.
  6. click the button mute Microphone and on any other line that is cut.
  7. use the slider to increase the micro level and each line at least 75.
  8. click on OK.
  
  Step 3: Update the audio drivers

  You can see a front-end port microphone does not work, a recording device is missing in the recording tab, a microphone is not recognized when it is plugged in, or any other problem. There may be updates audio drivers that can solve this kind of problem. Use the following steps to ensure that the audio drivers are up to date.

  1. connect to the Internet.
  2. click on start and enter the Device Manager in the start search field.
  3. click on the plus sign next to sound, video and game controllers.
  4. right click on the name of the sound material and select software update of the driver...
  5. click on search automatically for a driver updated and wait for Windows to update the driver software.
  6 Windows checks a remote Web site to see if the update of the driver software is available.
  * If an update is available, let Windows install the update.
  * If an update is not available, proceed to the next step.
  7. once the update is successfully installed, test the microphone or line like that was made in step 1. If the problem persists, proceed to the next step.

  Step 4: Configuration of Windows registry settings

  By default, Windows 7/Vista automatically activates microphones and line - in ports. Use the following steps to set the microphone/line-in port to be the default port and configure the logging levels.

  1. If the recording in the Audio window tab is not selected, open the sound and click the recording tab and make sure the State is defined as below.

  1 - port microphone - work and set as default

  2 - line In - work

  3. digital (S/PDIF port) In - work

  4 - stereo Mix (mixer software) - disabled

  1. If several microphones or line - in ports are available, select the port you want to use. Click on set as default to make this device default audio input device.
  2. If the device you want to use contains a small circle with an arrow pointing down, the device is disabled. To activate the device, right-click the device name, and then select activate.
  3. once the selected device, click Properties, and then click the levels tab.
  4. adjust the slider up to 75% of its range.
  5. If the mute is enabled, click the button mute to reactivate the device. The mute button should show as a blue speaker without any red circle.
  6. If the Microphone Boost is available, adjust and + 20.0 dB.
  7. click OK to make the changes.
  8. test the microphone as was done in step 1 to determine if Windows is able to detect a signal from the microphone or line used. If you have completed all the steps and the microphone or the source device still does not work, the audio ports or the computer's sound hardware can be bad.

  It may be useful
  Aziz Nadeem - Microsoft Support

• Microphone does not work after upgrade from Vista Home Premium to Win 7 Home Basic-Sony Vaio VGN-NS25G

  Microphone does not work after upgrade from Vista Home Premium to win 7 Home Basic Edition. Laptop model Sony Vaio VGN-NS25G, bought in India

  My built-in mic not working anymore after the upgrade from Vista Home Premium to win 7 Home Basic Edition. Model laptop Sony Vaio VGN-NS25G was bought in India. I have taken the loacl Sony Service Center and they said that Windows 7 drivers for the microphone Sony was not yet available. They mentioned that the only way to fix the problem was to upgrade to Vista. Is this true? Where can I get these drivers for the microphone, and they are not available, when will they be available?

  Hello

  Method 1.
  Interestingly, I found the drivers for Windows 7 for this particular model of Vaio. Here is link thye:
  http://www.Sony-Asia.com/support/download/362654/product/VGN-ns25g/sectionfirst?subpage=detail

  I suggest updating all your drivers from the link above and drivers Realtek especially.

  Method 2. Set the default Microphone.

  Once the drivers installed to check if the microphone is the default value, here's how:

  Exercise the functions mentioned below to adjust the Microphone as default:
  1. Click Start and click on Control Panel.
  2. click on sound, then a new window will open.
  3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
  4. now check if the Microphone is listed there and right-click on it and choose activate.
  5. turn highlighted that Microphone and click "set as default".
   
  For more information see the articles below:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• On board Toshiba microphone does not work do not under Windows.

  Original title: built-in Microphone Toshiba-windows 8

  Recently updated to windows 8.1 (disaster), knocked out my microphone.

  Contacted Toshiba and reset back to manufacturers settings (windows 8)

  After resetting and windows set up Skype app will not force me to reinstall it from store, once done the microphone does not work.

  Impossible to identify all the audio options in windows 8, which could cut the microphone.

  Also my DVD stopped working, after you insert a disc, I get the message "Insert disc" and when you press on enter the disc ejects.

  Any help gratefully received

  Hi John,.

  Welcome to the Microsoft community.

  I understand the inconvenience you encounter after upgrade to Windows 8.1. You may not use the Microphone and also have a problem with your DVD player. Before proceeding, we need more information on this topic in order to help you further.

  1. If you're still in Windows 8.1?
  2. Is that what happens with individual DVD?

  I suggest to make the methods provided by Mr. Rajesh Govind, to the following link.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/my-headset-microphone-not-working-in-Windows-8/f4f1ad12-E7EA-4FFB-ac88-df5eed3298e6

  Note: Check even if you use the latest drivers for DVD.

  I hope this helps. Let us know if the problem is resolved. For additional assistance, feel free to contact us.

  Thank you.

• Recently installed Windows 7 on Pavilion dv6748us - internal microphone does not work

  I searched on the web, without success, to find how to solve this problem.

  I recently installed Windows 7, 32 bit, on laptop HP Pavilion dv6748us to my wife. Now its internal microphone does not work.

  Have got some advice "roadside" use a Windows Vista driver; Have no idea what is the driver or how to get it.

  Have found information about uninstalling driver realtek audio and reinstall an earlier version; Have no idea about it no more.

  Would appreciate an answer with a positive result.

  Thanks for any help.

  Hello:

  Looking at your system information, you may have one of two possible audio cards:

  Conexant HD audio or the RealTek HD Audio

  The fact that you could not install the RealTek HD audio driver tells me that you don't have a sound card RealTek. Check your device manager and look at your sound card and check what sound card you have.

  Here are the Vista 32 bit driver for the Conexant sound card:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3632100&prodNameId=3648286&swEnvOID=2093&swLang=13&mode=2&taskId=135&swItem=ob-63949-1

  Here are the Vista 32 bit driver for the Realtek sound card:

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3632100&prodNameId=3648286&swEnvOID=2093&swLang=13&mode=2&taskId=135&swItem=ob-59516-1

  If you have the Realtek audio card, I would download and install the driver of more recent, HD directly from RealTek site:

  Accept the agreement, download and install one on the list. Maybe it has been updated to solve the problem you are experiencing.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Paul

• IPhone 6s - microphone does not work on all applications except camera and calls

  Hey, I don't know exactly know what happened with my phone. Suddenly, my microphone work on LINE, Whatsapp and almost all other applications that use mic. Except, camera and when someone call me on my number.

  But it does not work on whatsapp and LINE calls. And it also does not work when I snapchat. Only works on the default camera Apps and call through my number.

  I tried:

  -restart my phone

  -hard reset and blink? Reset with the power and the "home" button.

  -read the micro support page. Still no solution.

  TL; Dr:

  my microphone does not work on every apps on my phone except calls through number and approx. of default camera it gives you just that silence when I play it on voice notes. But it works when I record yourself using videos on the default camera app.

  Hello Bllacke,

  Thank you for using communities of Apple Support.

  I see from your post, some applications have a problem to access your Microphone. I know how it is important to ensure that your applications have access to the Microphone and can use this feature. I have a few things I want to try.

  First, tap Settings on your iPhone and then scroll to the last section that lists your apps. Select the applications that use the microphone and make sure that the Microphone is activated (green).

  Then, follow the steps in the article below to close these applications:

  Force a nearby application on your iPhone, iPad or iPod touch

  Then, test the microphone in these applications again and see if it works.

  Best regards.

• Portege Z30-A-189: microphone does not work with the connected headphones

  Hello
  I have a Portege z30-a-189 ultrabook.
  Today, I wanted to use Skype with a headset for the first time and I noticed that when the headphones are connected, the internal microphone does not work.
  When I connect headphones that have the microphone, it works, but I want to use headphones that do not have microphone.
  I chcecked all in windows 10 sound settings.

  If you come on a site back, you will find the solution. (see my last post - realtek settings)
  https://Forum.Toshiba.EU/showthread...-in-headphones