Most of the apps on my mac stop responding after that I do something meaningful

Similar Questions

• Most of the apps I tried to download read "Installation failed".

  Most of the apps I tried to download read "Installation failed".  They stop at about 42 percent. Reads the message, "Installation is complete although some optional components failed to install correctly. (6) why is this, and how to fix it?

  Code 6 & Code 7 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

• Apple os 9.3.3 charged down behind my back and now my i phone will not open most of the apps because there is not enough memory.  I see that I have 40 GB of memory left on the cloud over 50.  Question, how can I use my pc to see what has been done

  Apple os 9.3.3 charged down behind my back and now my i phone will not open most of the apps because there is not enough memory.  I see that I have 40 GB of memory left on the cloud over 50.  How can question, I use my pc to see what has been downloaded on the cloud?

  Your question has nothing to do with iCloud. You should remove unnecessary data from your phone to free up about 10% of your phone's storage space.

• Hi, the Microsoft app (photoshop, indesign, illustrator) are missing my Mac, while everything is up to date on the creative cloud? How can I recover the app on my Mac hard?

  Hi, the Microsoft app (photoshop, indesign, illustrator) are missing my Mac, while everything is up to date on the creative cloud? How can I recover the app on my Mac hard?

  Hi Ludovic,.

  You can follow the article: CC help | Download, install, update or uninstall applications which will help you install your creative Cloud applications.

  Let is know if that's what you are looking for or looking for any other version of Adobe applications.

  Thank you

  Yann Arora

• Crush the display flashes for 2-3 minutes after that mini mac wakes up from sleep

  Crush the display flashes for 2-3 minutes after that mini mac wakes up from sleep

  If you have another Thunderbolt cable, plug it into the unused port on the

  Thunderbolt Display and then in the Mini and see if the same thing happens.

  What you can see is a precursor of the poster, built out of the cable.

  At least, it could eliminate a costly repair problem.  Although the cable itself is not

  expensive, opening to the top of the screen of TB to replace could be.

  Well that not connected on a Mini, I began to see in similar behavior my

  iMac, so that there was finally a break in the complete cable.

• Check no error in the app store so I don't know that my apple id pass is correct

  Check no error in the app store so I don't know that my apple ID pass is correct

  Go here > https://www.apple.com/emea/support/itunes/contact.html < and fill out the form

• I got the error message "display driver stopped responding and has recovered," when running windows experience index.

  This error continues to occur after I wiped the system and the drivers and reinstalled the. What should I do? My video card is an ultra 8800 which has never had any problems.

  Hello

  See the following article:

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista:

  http://support.Microsoft.com/kb/2665946

• I am trying to download the free trial for Mac, but it says that my system is no longer supported. Currently, my mac runs on 10.8.5 version but it seems impossible to update the mac. Someone knows how to fix this?

  I am trying to download the free trial for Mac, but it says that my system is no longer supported. Currently, my mac runs on 10.8.5 version but it seems impossible to update the mac. Someone knows how to fix this?

  Hi elizabethg,.

  Photoshop CC 2015 would require minimum Mac OS 10.9, therefor you can maximum download the trial version of Photoshop CC 2014 which is compatible with the version of Mac OS you have.

  Download link: direct download links of Adobe CC 2014: Creative Cloud 2014 Release. ProDesignTools

  We will also recommend you use Photoshop CS6 trial, because if in case you want to buy the trial then its available through the third party dealer as a standalone application.

  Download Creative Suite 6 applications

  Configuration of Photoshop

  Kind regards

  Mohit

• RALink RT3290 stops responding after waking up from hibernation, loss of connection

  RALink RT3290 802.11bgn Wi - Fi adapter (driver 5.0.37.0 25.11.2013) stops responding after waking up from hibernation, loss of connection. To recover, it must be restarted (toggle), what happens no wired connection, for example, obviously, drivers Ralink need good alarm clock a reset. Thank you in advance.

  Looks like that driver update solves the http://www.mediatek.com/en/downloads/ problem

• update the apps created from an old email address that is not in use most

  created from an old email address that is not in use most

  I am currently updating the purchased applications that were created when I got an e-mail and password. I have more access to this email address, nor I remember the old password. Any ideas? Thank you. Penny

  Then you will not be able to update this app.

  Either don't update or delete the app and install it with your existing apple ID.  Data may be lost in doing so.

• Apple music stops after playing a song! I use windows 10 and the new itunes. He stops playing after one, sometimes two song... radio too... Please help. I installed and all new authorized...

  Apple music stops after playing a song!

  I use windows 10 and the latest itunes on my laptop. He stops playing after one, sometimes two songs... radio too... Please help.

  I installed and all new authorized...

  Thank you...

  Markus

  same thing here for all my Mac or PC windows... they are "working" 8 months later... unreal

• Windows Vista (32 bit) stops responding after installing the program...

  Hello.

  Recently, my Dell XPS M1530 (Windows Vista 32-bit) has been extinguished during the execution of the system updates (we had a power outage during the night and I didn't) and would only start in safe mode. I moved all my documents on a portable HARD drive and reinstalled the operating system to try to save the computer.

  After I did that and reinstalled the drivers (downloaded from the Dell site via my system identification label), I started to load my programs on it (Adobe, Microsoft Office, etc.). After I install a program and exit the installation window, Vista stops responding. I can't click on the Start button (the mouse will go over it, but it does not allow me to select) or one of the other button I have in my toolbar. I can't click anything in the Dock of Dell at the top of my screen, either.

  The only way to turn off the computer must press and hold the Power button until the laptop turns off. I HATE doing this, but there is no other way to turn it off once a program has been installed.

  Any thoughts on what is happening here? I hope this is just some kind of error on my part - I can't afford to get a new machine. I wanted to upgrade to Windows 7 (my machine can handle), but I don't want the same problem occurs.

  Thanks for your help in advance!

  Hello

  As you re-installed Windows and the problem persists the rules well enough software. The power
  failure should be accompanied by a power surge or other that has caused a problem in the computer.

  Makes it sound like there are hardware problems that can probably be repaired. Have you looked at the system
  by a real computer store (not the leeks and the glances at a Best Buy or other stores) or Support of Dell.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cannot run most of the programs in Control Panel because it says that I don't have \WINDOWS\system32\rundll.exe'. on my hard drive

  I recently installed sp3 on my computor he had sp2 now when I access panel, I can't run any programs like display or add or remove programs or internet con. I tried the system restore but it will not go forward or backward I always got the error this file \WIndows\system32\rundll32.exe'. is not on the hard drive that I can reistall sp 2 with sp3 hope somone can help thanks lindell wood

  If you have installed SP3 and now the file is missing, the opinion of the Support Engineer Microsoft won't help you unless you have a genuine XP installation CD also is Service Pack 3.

  That's extremely unlikely, unless you did it yourself and some people have never seen a real installation of XP bootable CD in their life then, how is this will help...  But, this is a link to a Microsoft KB article.

  When you try to open a control panel applet, you see a message like this:

  Control Panel
  Windows cannot find 'C:\WINDOWS\system32\rundll32.exe '.  Make sure you typed the name correctly and then try again.  To search for a file, click the Start button, and then click search.

  If the file is actually missing, it was probably quarantined (actually deleted) programmatically your antivirus or anti-malware not specified that you use.

  You might want to reconsider anything not stated antivirus or antimalware you programs use and whether or not they are effective to protect your system.

  You can look in the c:\windows\system32 folder and see if the file is actually missing or not, but you should replace it somehow.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:
  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called rundll32 when the name of the file should really be called rundll32.exe (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

• Windows Media Player stops responding after you install a third-party product that registers its own version of the Wmp.dll file

  I installed a media player from a third party, and when I uninstalled it, I clicked YES to delete all files attached to it. After that, I am unable to open all the files or upload files to try to solve the problem. Can anyone help?

  Thank you

  Hi LiliaAG,

  You can try to uninstall and reinstall Windows Media Player and see if it helps. See the following links for the same thing.

  How to uninstall Windows Media Player 11 in Windows XP

  Download details: Windows Media Player 11 for Windows XP

  See also:

  Download Windows Media Player - Microsoft Windows

• IR remote stops working after that the system will switch to standby

  IR remote no longer works after that the computer goes to sleep.  I use Windows Media Center (Vista) to the TV and use the remote a lot.  The ONLY way to make it work is to restart the machine, which is a PITA.

  In the device, here is what is displayed Manager...

  Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  I tried uninstalling, reinstalling the driver, unpluging the receiver IR USB, displacement of ports, etc., the software MS difficulty he tried, but nothing works.  It allows to work all the time, but these last few months, you must restart the computer to operate the remote control.

  Any ideas?  Help, please.

  BTW, it is a HP Desktop Media machine, and the remote control is the standard HP remote given out with their machines.

  Here is the official Microsoft fix for error code 38:

  Code 38: Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory
  http://TechNet.Microsoft.com/en-us/library/cc772090%28WS.10%29.aspx

  Have you tried to deactivate "standby" and checked for the repetition of the problem with the IR remote?

  You can ask your question to the Media Center experts at the green button forum:

  http://thegreenbutton.com/

  Have a Word with the help of HP to see if they have a fix for the same.