Most of the problems have been repaired, but now a new.

I am running Windows XP SP3 on HP Pavilion a708n PC. A previous issue [July/August 2012] with Chkdsk to run each time you start. I used cmd prompt and input: chkntfs /X C: and amended the registry key to: autochk k: C *. I ran Chkdsk 'My - Tools', no problem found.

I edited the registry key to the default setting. Everything was going well for about a week, then the "blue screen" starting: "autochk * program not found skipping autocheck.» I can always run Chkdsk. I also ran it in the Recovery Console thought that can stop the 'blue screen' message, but he did not. Now, these last three days, I can't run defrag; I get this error message: "Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume HP_ PAVILION [C:]. Please run Chkdsk /f.' I have done this and still cannot run Defrag - same message opens.

I know that the file "autochk.exe" is in 4 four files:

#1) C:\WINDOWS\$NtServicePackUninstall$

C:\WINDOWS\I386 #2)

(#3) C:\WINDOWS\system32

(#4) C:\WINDOWS\ServicePackFiles\i386

On each folder click RT., click Open (file) point autochk icon and this message appears: "unable to run autochk.exe in Win 32 Mode."

Panda Security [apparently] missed a Trojan Virus before that. PC was not running as usual - very slow start and opening various programs has been slow.

I have downloaded Microsoft Safety Scanner Utility and it found the Trojan horse which is not respected in Panda scans. I did a few other "tweeks" as running Sfc/Scannow - no corrupted files have been found. SFC/Cachesize = 50, set and Sfc/Purgecache. I also removed the two latest .NET Framework Windows updates. Since I installed these two .NET Framework Updates, run Net Frame repair and everything picked up his old back gear and everything seems to work very well conducted.

I also uninstalled PandaIS2012, using their uninstall program / Web site by running twice by their instructions by e-mail and installed PandaIS2013. The SCANINICIO file seems to always stay in [their] registry key, but is no longer start-up with Inicio. They are the same - they both use the same way to open Inicio.exe. Panda helped with everything, but now no longer SCANINICIO address in the registry, but not at the start.

There is a lot of information, but most likely, it has an impact on the question of Defrag/Chkdsk.

You'll appreciate help that you can give me.

Thank you all. Barney Bear

Your C volume was marked 'dirty' - more than a minute.

If you are looking for your system to get a XP file you're likely to find in several places - look at your example:

#1) C:\WINDOWS\$NtServicePackUninstall$

C:\WINDOWS\I386 #2)

(#3) C:\WINDOWS\system32

(#4) C:\WINDOWS\ServicePackFiles\i386

#3, that's where the 'good' copy workload of autochk is supposed to be.

#2 is a copy of autochk shipped with your system of the factory and probably is outdated

#4 is a copy of autochk got installed when you installed the Service Pack 3 on your system (it should be the same as #3)

#1 is the backup copy of the original autochk that was made when you installed SP3 if you never uninstall SP 3, which will be handed over (do not uninstall SP3).

You can see that Elizabeth23 has a copy in the dllcache folder and so, if you, but you will not see that if you do not include the files and folders hidden in your search. Files in the dllcache folder are backup copies of critical XP system files that are used as spare parts (automatically) whenever a critical file goes missing.

Elizabeth23 also has one in the cdmcons folder, as it has the installed XP Recovery Console (you can't).

When you try to defragment a volume and Disk Defragmenter reports:

Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume: (c :))
Please run Chkdsk /f.

This means that the volume that you want to defragment was marked 'dirty' XP. This is not necessarily all of the data has been lost on the volume, it simply means that XP thinks that the volume should be checked to find errors because of something that happened before.

You won't be able to defragment the volume until the dirty bit has been removed.

This does not mean that a disk check is scheduled to run, and you can't cancel what needs to happen in this case because this isn't the problem.

Also the dirty bit is not set on a volume, you can still run a disk defrag with a record of date of arrival in the meantime (try).

Therefore, enter commands to reset or erase a disc awaiting review or suggestions for changes to the registry to make changes is a waste of time - that is not the problem (make sure Microsoft hired technical support engineers and the 'experts' Forum moderators).

A volume can be marked as dirty, if the system underwent a power interruption (power failure, pulling plug, removing the battery, button / stop), abandoned restart or an abnormal termination. One of these events?

When XP starts, it automatically checks the bit of impurity on each volume. You can also tell XP to ignore the bit of impurity on any volume, but this probably isn't a good idea in case there is a real problem that needs to be fixed. If you have a hard drive where the dirty bit will not disappear, you can tell XP not to check that and that might mean readers is a failure.

If the starting XP detects that the volume is dirty, it will be automatically run the check disk with error correction (chkdsk/r) and try to fix the problems detected.

If the chkdsk command succeeds, it clears the dirty bit, then you can defragment the volume.

You can check the status of your bit of impurity from a command prompt window.

To do this, click Start, run and enter in the box:

cmd

Click OK to open a command prompt window.

For example, to query the bit of impurity on drive C, type:

fsutil dirty query C:

The sample output:
Volume c is dirty
Volume C: is dirty

Is the volume of your sale or it is not dirty?

Tags: Windows

Similar Questions

PDFs with parts of the text have been highlighted, and now, suddenly, these docs print without the appropriate text highlighted. Never happened before. As seen on the screen, highlighting appears, but when you print, it's gone. Help, please.

PDFs with parts of the text have been highlighted, and now, suddenly, these docs print without the appropriate text highlighted. Never happened before. As seen on the screen, highlighting appears, but when you print, it's gone. Help, please.

Try to turn on the print with comments. The comments really are your strengths.

Hello... I have a subscription plan on CC and notified just updates are available, so I've updated bridge CC of PS, CC2014 PS and Lightroom 5. All updates have been successful but now CC PS displays a button that says trial start. All applications say ' d

Hello... I have a subscription plan on CC and notified just updates are available, so I've updated bridge CC of PS, CC2014 PS and Lightroom 5. All updates have been successful but now CC PS displays a button that says trial start. All applications say ' day '. I'm on a Macbook Pro running the Mavericks. All advice appreciated. Thank you

You can go to help > disconnect... restart PS and if you see "buy this product", click that and connect.

You can also disconnect from Creative Cloud Desktop app (gear icon > account preferences > D├⌐connexion restart your computer and log in.)

Ask in the forum of creative cloud Adobe Creative Cloud

So those who fail. You must contact the Support by chat or phone

Contact the customer service

Gene

How findout if all the partitions have been deleted and now a laptop that has Windows 8 operating system using Windows Vista with a shell IE 9?

I bought a laptop broken at a friend's House. It is not used for the operating system windows 8 and wanted to use the Windows Vista operating system. Son of friends put in place this laptop for it, which was new when she bought in a retail store. Is there a way I can find out whether all the partitions have been deleted during the installation of Vista? I still see window 8 logo that I sign as an administrator user on this laptop.

When I log on this computer, the previous owner of the screen name is the only one that appears. I go in Control Panel, click Add another account, then I see the screen name I posted. I could use the WiFi from my PC at home that Win 7 OS.

When I started working with the laptop, I was able to bring control of the camera. Now I thought that the version that I use does not allow this operation. Be happy with any Positive help with my problems.

Thank you

Phil W.

Hello

Start > type CMD

Right click on CMD and select run as administrator

Type diskmgmt.msc

Press enter

This opens where you can view the partitions on the disk management system

Who has installed Windows Vista, your son or friend? Fact that they create a dual boot environment or reformat?

http://www.technorms.com/8438/Windows-8-create-hard-drive-partition

Multibooting requires separate partitions on the hard drive of your computer for each operating system. To create and format a partition, see create and format a hard disk partition.

To check if a dual boot system in place, start > Type msconfig

Click on the Startup tab

You see two operating systems listed? Windows 8, Windows Vista

http://www.groovypost.com/HOWTO/Microsoft/Vista/how-to-change-default-OS-for-dual-boot-system/

I think that Windows 8 has the following partitions

400 MB Partition Recovery (contains recovery information dated from before my upgrade)
- 300 MB EFI System Partition
- 350 MB Partition Recovery (contains information for recovery of my upgrade)
- 17 GB Partition Recovery
- 220 GB of Partition primary
Windows Vista has drive C and drive D

Done reformatting refers to a hard disk or partition that already has been formatted or that contains data on it. Reformatting a disk deletes all the data on the disk.

Had computer problems, they have been corrected, but I have no sound icon on the toolbar. How can I get an icon?

Had problems with my computer, they have been corrected, but I have no sound icon on the toolbar. How can I recover this icon?

Control Panel > wounds etc. > display the icon in the systray (or similar) is checked.

If for any reason any who does not, re-post giving error messages that may appear when you try to play a song or video.

See you soon,.
Jerry

Sierra update once the photos has been repaired all of my albums have been removed, videos and all album

After the update of Sierra once the photos has been repaired all of my albums have been removed from my album of videos from photo library and all, only defalt albums that are there are people, last imported and my photo stream.

If the videos, Burst, Slow Mo, time, selfies are all gone?

Please help someone

Videos are, Burst, Slow Mo, time, selfies albums in the missing sidebar or the content of these missing albums?

You have a copy backup of the library made just before your Sierra improvement?

I have version 6 Creative Suite Design Standard disc. When I tried to install the software on my new laptop, several components have been installed, but Acrobat and Illustrator were not. The system returned the following message: "Adobe genuine software c

I have version 6 Creative Suite Design Standard disc. When I tried to install the software on my new laptop, several components have been installed, but Acrobat and Illustrator were not. The system returned the following message: "Adobe genuine software check failed." The product you want to install is not genuine software remains, and seems to be counterfeit. Please report a piracy or contact customer support for assistance. This is the drive I bought from Adobe and running on my old laptop. I have the right product and serial numbers, which allowed me to install several other components of the software.

Warning: "Adobe software real failure of Validation...". » | Windows

I changed from a PC to a MAC and have reformatted my external hard drive with my photos. Originally LR pointing the reader as reader J but now I can not use a letter. Y at - it anyway to solve this problem. My catalogue works fine?

I changed from a PC to a MAC and have reformatted my external hard drive with my photos. Originally LR pointing the reader as reader J but now I can not use a letter. Y at - it anyway to solve this problem. My catalogue works fine?

In the library, go to the folders Panel, right-click on each folder of upper level and "updated to the folder location".

Until a few days ago I was able to print a PDF from Acrobat Reader ms in Windows 7. Now I get "the document could not be printed." The next panel says "there are no pages selected to print," even if all the pages have been selected. Thoughts?

Until a few days ago I was able to print a PDF from Acrobat Reader ms in Windows 7. Now I get "the document could not be printed." The next panel says "there are no pages selected to print," even if all the pages have been selected. I've uninstalled Reader and reinstalled, but the problem remains. I also tried to repair the installation and that doesn't work anymore.

Thanks for the tip. It turned out that kind Reader has been commissioning in protected mode. I changed the setting and it prints now as before.

Thank you

Are there still known issues with Lightoom 5 and El Capitan with respect to attachment? I know that problems have been resolved with CC Lightoom

Are there still known issues with Lightoom 5 and El capitan with respect to attachment? I know that problems have been resolved with Lightoom CC. I looked on the Internet but most of the references are Lightoom CC. Ive got all the updates with Lightoom 5, (Camera RAW 8.1), but also Apple, (El Capitan 10.11.3), but my Nikon D800 will not always tie.

HAL P Anderson wrote:

The problem is in the SDK (SDK) of Nikon. He used features of OS that changed with El Cap. All previous versions of LR were broken by the Exchange operating system. For LR 5 to work, it must be associated with the new SDK of Nikon, and Adobe is not reissue of older versions.

The result is: LR5 and previous versions will continue to not be able to attach Nikon under El Capitan. I'm sorry.

HAL

Although what you say is maybe true, I'm not sure, but there were reports of people that says exactly the opposite. Home of Nikon has not worked in 2015/6 but continued to work in LR 5 on the same Mac running 10.11.x.

It seems iPhotos can where the photos have been tokens without GPS information?

I had to travel to Iceland two weeks ago. I had turned on my 6s iPhoone, while GPS receiver.

The picture on my iPhone and my Macbook Air can identify where I toke the photos to see the name of the place that I toke the photos and place the thumbnails to the right position on a map.   That's great!

But I can't find that there is GPS data in each photo EXIF Info!   I tried to read the GPS data by using the command line or from an extract tool: exiftool...    NO GPS data in photos EXIF Info!

Why can't data from GPS location in photos exif info, while the pictures can say where the photos have been symbolic?

The reason why I want to dig the GPS data in the photos I have token by iPhone 6 s is:

my camera does not have a GPS receiver to build-in.   I want to get the GPS data in the token of photos from iPhone 6s then write on photos without GPS data using tools such as exiftools.

Thank you for your time.

Li

But I can't find that there is GPS data in each photo EXIF Info!   I tried to read the GPS data by using the command line or from an extract tool: exiftool...    NO GPS data in photos EXIF Info!

Most of my photos iPhone 5s is the GPS tags display. How you have exported photos to see the EXIF data?

When you export the edited versions, select "location information". File > export > export... photos.

When you export the originals (file > export non-original), activate the sidecar file.

Then you should be able to see the GPS values with exiftool or outline:

The first pictures after activating the iPhone have no tags GPS, if you the dishes inside or the iPhone has not yet found enough GPS satellites.

Cannot open any programs, I think that somehow the files have been changed to .lnk files

Original title: I'm unable to open programs in my Start Menu.

When I click on an item in the beginning, all programs selection and click it, instead of opening, I get the name of the program, for example Microsoft Works... LNK and that's all I get the program never opens. I think somehow that the files have been changed to .lnk files but do not know how it happened

This happened for several months and I'm sure that there is an easy solution to return to what it was but don't know what. I tried the system restore, but that did nothing and don't know what to do next. Any ideas? Thank you... betseyd112

original title:. LNK files

Hello

1. what operating system you are using on the computer?
2. did you of recent changes on the computer before this problem?
3 are you facing this problem with a particular program or all programs?

See the methods and check if that helps.

Method 1: refer to the article for help.
When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program
http://support.Microsoft.com/kb/950505

If the problem persists, create a new user account and check if that helps.

Method 2
Create a new user account-
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

Let us know the status of the issue.

my photos are saved in my photo file, but they have been digitized and now say adobe PDF and post to Facebook, someone knows why or what I can do?

my photos are saved in my photo file, but they have been digitized and now say adobe PDF and post to Facebook, someone knows why or what I can do?

Hello

Thanks for posting your query in Microsoft Community.

According to the description, you are facing problems with display PDF document on the website Facebook. To quickly provide a solution, answer these questions:

1. web browser Whish is do you use?

2. you receive an error message or error code?

3. what operating system is installed on the computer?

4 did you do changes on the computer before the show?

If you are using Internet Explorer then I suggest you to follow these steps and check if it works.

Method 1: You can open Internet Explorer mode without modules and check if the problem persists.

Run Internet Explorer in "no Add-ons" mode

a. click Startand type Internet Explorer in the box to start the search.

b. click Internet Explorer (No Add-ons). Internet Explorer opens without Add-ons, toolbars, or plug-ins.

c. test Internet Explorer to verify that it works correctly.

You can also follow step 4 of section to disable without add-on.

Internet Explorer is slow? 5 things to try

http://Windows.Microsoft.com/en-AU/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

Method 2: Reset Internet Explorer settings

Follow the steps in the KB article and check out them below if the problem persists.

How to reset Internet Explorer settings

http://support.Microsoft.com/kb/923737

Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

No pilot of the plane have been found.

No pilot of the plane have been found. Make sure that the installation media contains the correct driver, and then click OK.

Hi CraigKeller,

Please see the thread with a similar problem and fix possible:

http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/no-device-drivers-were-found-when-trying-to/5b105b56-a0cc-441b-8559-ca5feac9105a

I hope this helps!

Photo Gallery-tags used for photos of the Windows remain even if the photos have been removed

Picture of Windows Gallery__

Tags used for photos stay in the computer even if the photos have been removed. The remaining tags in UNROLLING in the space where you can enter a tag are no longer relevant and are just a nuisance.

Tags used for photos stay in the computer even if the photos have been removed. The remaining tags in UNROLLING in the space where you can enter a tag are no longer relevant and are just a nuisance.

=================================
Rename the database library file will force
Photo Gallery to create a new file the next time, he is
launched.

Anyway... the following article explains how to find
Pictures.PD4:

Stops Windows Live Photo Gallery (944221)
answer or does not start
http://support.Microsoft.com/kb/944221/en-us

After Renaming Pictures.pd4 you will need to re-catalogue
your photos and some tags may be lost. If the name change
Pictures.PD4 does not solve the problem... you can delete
the new Pictures.pd4 file and change the name of the
origin to Pictures.pd4 and the catalog file should
be restored.

In later versions of Windows Live Photo Gallery...
the name of the file is Pictures.pd5.

Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

Most of the problems have been repaired, but now a new.

Similar Questions

Maybe you are looking for