WRT160N question. I'm about to blow my brain.

Similar Questions

• Question to E4200v2 about RITS

  I have a V2 E4200. 2.4 ghz and 5 GHz bands are both active and named differently. What I've read they should both appear in the list of networks when I connect other computers etc.? All I get is the 2.4 ghz.

  Everything about the router works fine as far as I know, can't seem to access the 5 GHz band. Maybe I'm missing something? I recently updated the firmware of the WiFi chip, but it's the same situation.

  Both groups have the same password with two of the first three letters on one.

  Thanks for any help

  Jim

  Hi Otisdog,

  Your router must release 2 networks, BUT not all computers/devices can detect the 5 GHz network. You have a double router broadband and if you want to see the 5 GHz network you must also use a card wireless dual band on your computers/devices.

• XBOX 360 WPA or WPA2 WRT160N questions

  Hello. I'm going to buy a wireless adapter for my Xbox 360 and I have a few questions.

  The Xbox 360 works with WPA2? If not and I turn it on for the WPA, I have to reset all my devices (1 laptop, 1 office, 1 Wii) with a new security code?

  Yes, you need to change all settings match those of your router.

• Question of memory about the implementation of win 7 64 bit

  I have an Acer 8920 G Intel [email protected] running win 7 64 bit.  under Vista, I had a limit of 4 GB, with Win 7, I can increase my memory to say 8 or 12 GB?  I think the limit is 16 GB right?

  I've updated a lot of systems.  I suspect your new Vista machine, was a 32-bit version.  32-bit systems can not 'see' more of about 3.25 G of memory, no matter how you equip with.

  64-bit systems can theoretically see a lot more.  The limitation will be with the chipset and BIOS of the particular model.  Yours has 2 memory slots.

  According to my experience, two systems of 4G equipped that are identical in all directions but is 32 and 64 other results in 15% performance improvement.  In addition, Win7 is about 10% faster than Vista SP2.

  Problem is the manufacturer produces a model, provides updates of the software of the chipset and BIOS that allow these improvements, but never reissues sheets.

  I found many systems including the specs say 2 pcs 2G each are at max.  In many of these systems, I discovered that they handled 2 PC 4 G each without problem.  Make sure that your BIOS is the last before trying this.

  It is essential that the 2 PC's are matched.  If they do not match, the memory does not work in mode Dual DDR2 is capable of.   Also, see if you can find the specifications for the memory CASE latency rate.  Some systems will not accept a higher speed and strips of larger memory than if they are provided with the right latency memory.

  Your probably provided with 2 PC 2 G DDR2 667.  I would not be surprised if DDR2 800 is not working and thus produce improved performance.  I found that this was the case in many systems.  You will find some DDR2 800 and 667 cost the same.  If the system will not work at 800, your 800 memory works well, but speed 667.

• Connection with the WRT160N questions

  It seems that I installed everything correctly, the ping is very strong and when I use my DS or netbook my network comes up, but after that I punched in the code, it says unable to connect.  It is infuriating simply me, it was the important task but one on my Christmas day.  I reset, installed everything again and got the same result.  It's almost like torture to see the strong signal it waiting for me, but being not not able to connect:------.

  Help someone?

  I'm not sure of what all you have tried - I would like to check see youy ir adapter drivers PC network are up-to-date - use Device Manager to check

  Double check your network settings on the router - and ensure that they match in the config to the PC network.

  And perhaps the needs of version of the firmware of the router to update - check here for the current version and the update- http://tinyurl.com/y9qpzde procedure

• A few questions about the recovery image installation

  A recovery USB drive created using the Recovery Media Creator contains the Windows operating system and is it the Windows key to reinstall - how it is activated. Is it different for the repair disk.

  Can be used for a new installation of Windows 7 on a new SSD? Is this just a case of connection and the recovery disc running on the new drive to th? How the recovery Partition can be re-created on a new SSD?

  Drop Hello

  I can see user Justinian gave detailed answers, and I hope you understand how it all works now. Of my overwiev aside:

  What exactly is recovery image?
  + Recovery image is an exact copy of a hard drive and contains the exact copy, byte by byte, a hard disk partition. The copy includes all the partition information, sectors priming, the table of allocation of files, installation of operating system and software application different. +
  + You are using installation Recovery CD/DVD/USB, you can restore your system after heavy data loss, caused by an accident of operating system, hardware failure or complete virus attack. +
  + Recovery image installation procedure allows the installation of system and easy to user. Unfortunately, it is not possible to restore only certain files from a disk image. +
  + Each recovery image is designed for a specific model laptop and it cannot be used for any other series of notebook. +

  With other words, recovery image is a software package that contains Windows operating system, all the drivers needed for some portable model, Toshiba tools, utilities, and also some other software. A lot of people don't like these additional software, but no you don't have to use it. all things you don't like you can remove it from the system.

  Activation of recovery image:
  When you buy the phone model you also purchase the license for the preinstalled OS version that you get with your machine. After start and contact to the internet OS will be checked and activation will be valid.

  Please note: you can reinstall original image recovery 100 times if necessary. There is not a kind of limitation, and whenever it will be activated.

  Take care of your recovery media (DVD/USB). Do not lose it.

  Of course, it can happen that you do not find your recovery media. In this case you can order.
  Recovery order - https://backupmedia.toshiba.eu/landing.aspx
  Questions and answers about ordering recovery DVDs - http://aps2.toshiba-tro.de/kb0/TSB0202TA0000R01.htm

  If you have any other questions do not hesitate to ask.

• Question about cart Counter and position header J-26 of the widget in Muse conflict

  I recently purchased the award-winning J - 26 ecwid widget. I must say handguns are a beautiful set of enhancements and tools design for Muse. The conflict in question is the Cart counter Widget. I corresponded with the promoter to get this resolved and I was wondering if someone had this problem; As far as I know, this widget was designed to work with the store to trade Ecwid. (You must ask the developer if there are others) When the "Meter of Cart" widget is placed in the header of my page on a master page of cart or basket, I can't work properly. It could be something I'm not set up correctly or something else. But when the widget is placed under the header, it seems to work. The problem above the header area is that the counter disappears and does not make the connection with the store ecwid or something? I'm not sure. I am currently using a widget of J - 26 called a light cart followed the v2.3.1 and works very well in the position of the header. So all that being said, is there anyone who has tried the trolley counter in the header that works? Added note: I created a site skeleton with a connection to my storefront as a tester site, thinking that maybe there was a code problem. After bad and without success, I gave up. Currently, I'm looking for a work around to make a secondary master page for the storefront and to build a fake header move real heading to zero, so I can place the counter of trolley in the body of the page. Even with that there are a few problems.

  If anyone has had this same problem, please let me know, or better yet if you have a workaround or some instructions on how to make it work just in case it might be something I do not correctly.

  Again, the widgets are a great addition and I rent the developer for these. Any person who sets up an ecommerce site and wants to mark their page with many options, check on widgets. Well done.

  Ben

  Bravo for the professionalism of J - 26. After a repair my muse files, the developer of J - 26 set to update some of the widgets behave nicely with MUSE. Yet if you look at my first post here, award-winning J-26 ecwid widgets are well worth your efforts. Especially when developers are willing to look at the questions that pop up... and offer a solution! There are a few questions, I have about some of the settings, but all-in-all the characteristics fixed it are resolved.

  I give J - 26 an A +.

  Thank you

  Ben

• Question about business and Service of Proxy

  Hi friends,
  I have a question about services and proxy services business IE I need to find the time it takes to call an operation on multipoint business of proxy service, how can I do in oracle service bus (OSB)? You can help quickly

  If your question is only about the performance analysis,
  try to activate the 'monitoring' on the 'operational' of the Service Proxy Service/Company tab.
  For the Proxy Services, if you activate at the level of the 'Action' you get a lot of information about each individual action in a power of attorney.

  See http://www.javamonamour.org/2011/06/osb-profiling-your-proxy-service.html

• (Redirected) A few questions about Alienware Alpha, didn't know where to ask sorry.

  Hi, I was watching and thinking about buying an alienware alpha, but I had a few 1 questions that I can't find any info on. So could someone please help.

  1st question and that is my main I need to know, can I run Ventrilo on it and play all the games at the same time or would I still need a laptop to use ventrilo to chat with friends?

  2nd video of question 1, I saw said that I could run non-steam game, is it true? I will mainly play steam games, but I want to just make sure I could still run games as League of legends and perhaps The Elder Scrolls online because he is going to play soon from what I've heard.

  3rd question and sorry about that one, but I don't know much about computers so I need to ask. I see that $700 and $850 versions have higher processors makes this mean for games? Also they have more big disks hard, it's just the space right storage? Sorry for this question, that I just want to ask before you buy

  Please any info on these 3 questions would be useful :) Thanks in advance.

  Better in this position in the Alienware owners Club Forum, here:

  http://en.community.Dell.com/Owners-Club/Alienware/default.aspx

  Bev.

• New Question: Add a 2nd 'Home' icon in the toolbar?

  In an old question, I asked about adding a second 'home' icon I could randomly onto the toolbar since the old old thubber it is more than that.

  At some point after this forum question - that was not answered - someone offered me an add-on that would provide the 2nd type of House, but in B & W icon. No one knows about it? I can find it is no longer. Thank you all.

  Hello

  You can also try to Custom Buttons. Please see this.

• I am about to replace my hard drive. How can I reinstall forefox and always keep all my favorites and other related information.

  Question
  I am about to replace my hard drive. How can I reinstall firefox and keep all my favorites and any other relevant information

  The profile is a file that store your personal information in a safe place

  • https://support.Mozilla.com/en-us/KB/profiles
  • here explain how to make a backup of https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information profile
  • here explain how to restore

  https://support.Mozilla.com/en-us/KB/recovering%20important%20data%20from%20an%20old%20Profile

• Watchdog question along with BACK Smurf attack on router and duplicate MAC hardware address

  Before we get into too much detail, you should know that my understanding of the internal processes of a MAC or any computer self-taught self and therefore flawed and elementary is at best.  Specifications for my MAC will be provided below my Epistle.   The bottom line is that I caught an employee a long time ago on my iMac while I'm out and I noticed that she was doing something with the watchdog.  I thought nothing of it at the time, but the watchdog of name stayed with me.  Since that time, over a year ago, there were several problems with why online banking and other fraud concerns.  If the 2 are linked, I have no way of knowing.  But my iMac is essentially useless at this point, there are countless accidents every day... but before you spend $3,000 on the new, I thought that it prudent to ask for assistance from several sources informed.  My console, I noticed several instances of the hardware MAC (DAD) duplicate addresses.  I'll give you the result below.  I have also connected to my router Xfinity and that this month there were 5 distinct "SMURF ATTACKS" or DOS attacks.  Yet once, I'll give you the result below.  And finally, by connecting to my computer in standard mode, watchdog daemon doesn't seem to exist. However, when in safe mode, there is, but he is unable to initialize.  I followed Davis Linc instructions (from a question someone asked about watchdog not booting not) and his bash script output will be provided below.  Any help would be appreciated I run my business from my iMac and say State it mildly, I'm tired of spending days trying to solve this problem.

  Be aware that, in my view, that my virtual RAM is low, although I can't find a definitive answer.  Support Apple says simply drag the hard drive and start over.  Maybe they have reason.  No matter, I know that I have provided too much information below, but I don't have the knowledge to know what is important and what is not germain to the issue.    Thank you in advance.

  I. SMURF ATTACK - denial of Service

  FW. IPv6 BEFORE drop, attempts of 1772, 2016/3/13 12:44:59	Firewall blocked
  FW. Fall of IPv6 ENTRY, 22 attempts, 2016/3/13 12:38:09	Firewall blocked
  Blocked Unallowed devices, 17 attempts, 2016/3/13 12:14:43	Machine blocked
  FW. IPv6 FRONT drop, 3209 attempts, 2016/3/12 23:57:02	Firewall blocked
  FW. Fall of IPv6 ENTRY, 251 attempts, 2016/3/12 17:46:33	Firewall blocked
  Device MAC: 70:48:0F:82:02:43, 11281 attempts, 2016/3/12 12:52:06	Machine blocked
  FW. LAN2SELF DROP, 2 attempts, 2016/3/12 09:31:22	Firewall blocked
  FW. IPv6 FRONT drop, 2622 attempts, 2016/3/11 23:56:33	Firewall blocked
  FW. Fall of IPv6 ENTRY, 301 attempts, 2016/3/11 23:17:54	Firewall blocked
  FW. IPv6 BEFORE drop, attempts to 2392, 2016/3/10-23:56:04	Firewall blocked
  FW. Fall of IPv6 ENTRY, 323 attempts, 2016/3/10-23:35:55	Firewall blocked
  FW. IPv6 BEFORE drop, attempts at 2669, 2016/3/09 23:57:34	Firewall blocked
  FW. Fall of IPv6 ENTRY, 186 attempts, 2016/3/09 23:38:57	Firewall blocked
  Device MAC: 38:71: A: 18:D2:C9, 14185 attempts, 2016/3/09 23:32:32	Machine blocked
  FW. IPv6 BEFORE drop, attempts to 2986, 2016-3-08 23:57:12	Firewall blocked
  FW. Fall of IPv6 ENTRY, 305 attempts, 2016-3-08 21:55:14	Firewall blocked
  FW. IPv6 BEFORE drop, 999 attempts, 2016/3/07 23:57:50	Firewall blocked
  FW. Fall of IPv6 ENTRY, 105 attempts, 2016/3/07-23:53:20	Firewall blocked

  WiFi] [1393]: Wifi WPA2-Personal security mode 3/2016/02 05:40:06Notice [Dhcpc] [2224]: erouter0 T1 expires, Enter rescued State 2016/3/02 01:11:12Notice [962] Firewall: DoS attack - SMURF ATTACK IN = erouter0 OUT = MAC = 10:86:8 c: 50: *: *: 00:13:5f:05:ab:e2:08:00 SRC = DST = 46.229.168.201 *.155.194.241 LEN = 40 TOS = 00 PREC = 0x20 TTL = 41 ID = 29965 PROTO = ICMP TYPE = CODE 13 = 0 2016 15:16:16Notice / 3 / 01 [Dhcpc] [2224] : erouter0 T1 expires, Enter rescued State 2016/2/29 05:08:01Notice [962] Firewall: DoS attack - Smurf Attack IN = erouter0 OUT = MAC = 10:86:8 c: 50:2 *: 00:13:5f:05:ab:e2:08:00 SRC = DST = 73.155.194.241 LEN = 40 TOS = 00 PREC 209.126.116.176 = 0x20 TTL = 35 ID = 31525 PROTO = ICMP TYPE = CODE 0 2016 = 13 / 2 / 28 04:26:41Notice

  II. customers blocking Shutdown

  My iMAC struggles to sleep and I noticed this from the Console.  Not sure if that means anything, but I wanted to offer it.

  com Apple.ctkpcscd (164)

  19/03/16 4:54:57.728 Photos [34785] PM: customers blocking the closure:

  IPXProjectBrowserController2 (0x7ff8dd84e480), County of registration = 1

  PAImageItemController (0x7ff8df12bd70), County of registration = 1

  IPXProjectBrowserModel (0x7ff8d8f86600), County of registration = 1

  IPXAlbumsBrowserController2 (0x7ff8dd840600), County of registration = 1

  PAImageItemController (0x7ff8de2af680), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda7da20), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda534f0), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda73b10), County of registration = 1

  IPXSharedTabBrowserModel (0x7ff8d8f81760), County of registration = 1

  RKBackgroundImageProcessingContext (0x7ff8db6b29e0), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda535a0), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda7db00), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda73bc0), County of registration = 1

  IPXDatabaseYearsController (0x7ff8ddcb6f70), County of registration = 1

  IPXMainWindowController (0x7ff8d8c47380), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda7c390), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda7d3d0), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda73c70), County of registration = 1

  _IPXOneDatabaseSpecificVersionsController (0x7ff8df01c0a0), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda7d480), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda73d20), County of registration = 1

  IPXDatabaseYearController (0x7ff8dda7dcf0), County of registration = 1

  IPXProjectEditorProxy (0x7ff8d8c42d90), County of registration = 1

  IPXDatabaseYearController (0x7ff8dda11bd0), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda7d530), County of registration = 1

  FaceRecognition (0x7ff8d8fa9f40), County of registration = 1

  IPXDatabaseYearController (0x7ff8dda7dda0), County of registration = 1

  IPXDatabaseCollectionsController (0x7ff8ddcb7220), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda7d5e0), County of registration = 1

  IPXAlbumThumbnailGenerator (0x7ff8d8d85a50), County of registration = 1

  IPXDatabaseYearController (0x7ff8dda7de50), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda7d690), County of registration = 1

  IPXFolderThumbnailGenerator (0x7ff8d8fceeb0), County of registration = 1

  PAImageItemController (0x7ff8de31e4a0), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda7d740), County of registration = 1

  IPXEditorModel (0x7ff8d8c41030), County of registration = 1

  IPXImportBrowserModel (0x7ff8d8c22230), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda7d7f0), County of registration = 1

  IPXDatabaseYearController (0x7ff8dda7e010), County of registration = 1

  IPXVersionsMonitor (0x7ff8de143b60), County of registration = 1

  IPXPhotosBrowserModel (0x7ff8d8f79d20), County of registration = 1

  IPXVersionsMonitor (0x7ff8de255a70), County of registration = 1

  IPXDatabaseCollectionController (0x7ff8dda7d8a0), County of registration = 1

  IPXDatabaseYearController (0x7ff8dda7e0c0), County of registration = 1

  IPXEditorModel (0x7ff8de626590), County of registration = 1

  IPXEditorModel (0x7ff8ddbaadf0), County of registration = 1

  IPXBadgesOverlayController (0x7ff8ddd5ab10), County of registration = 1

  IPXAlbumsBrowserModel (0x7ff8d8f86540), County of registration = 1

  19/03/16 4:55:03.411 Photos [34785] PM: customers blocking the closure:

  FaceRecognition (0x7ff8d8fa9f40), County of registration = 1

  IPXPhotosBrowserModel (0x7ff8d8f79d20), County of registration = 1

  IPXSharedTabBrowserModel (0x7ff8d8f81760), County of registration = 1

  IPXImportBrowserModel (0x7ff8d8c22230), County of registration = 1

  IPXAlbumsBrowserModel (0x7ff8d8f86540), County of registration = 1

  The closure of blocking app which seems to be Photos.   I would back up all your files here first - probably two external backups - then try a photo / iPhoto repair pass - stop pictures / iPhoto, then launch the application with the option key (also labeled alt on some keyboards) and command.   You should get a dialog box asking you if you really want to fix the library.   If this fails, I would export or copy everything I could and rebuild each photo / iPhoto or - given other issues here - the whole of the environment.

  Regarding the duplicate addresses, you have an airport or time Capsule?  And if you want and need to have Wi - Fi and network assets, wired (such as it is apparent that this is the case), you will need to configure Wi - Fi as a point of access (the ' bridge'), or configure separate subnets for traffic.   This can be automatic with some integrated network devices, but may require one manual configuration with others.   But if you have a Gigabit Ethernet connected and active cable, there is usually very little reason to have Wi - Fi connected and active.

  What did or didn't happen here with unauthorized access is not likely going to be addressed either through the forums, many different things can happen to a system that has been compromised or has suffered an attempt to compromise, unfortunately.

  In regards to your concerns around safety and handling, the system has been tampered with, Apple is correct.    Down your data to one or two probably of external storage devices and reinstall from verified distributions and do not migrate existing applications or tools.   Reinstall those distributions checked.    Also remove all products the security module, anti-virus or anti-malware tools can be added here - what that looks like Symantec is installed - according to the suppliers for this withdrawal.   Additional security tools can cause a variety of problems in the system.

  You'll want to have these external backups in all cases, as one of the causes of the reported behavior is a peripheral fault storage.  Systems to get slow and flaky when storage is a failure.   A Time Machine configured and running, or some other regular module backup tool, at least.

  What is happening outside your router's problem of Verizon and just the normal dreck that happens on the rest of the Internet.   This is not your problem, unless you opened Internet access paths to the inside through the router on your network, and so does the rest of the Internet your problem.

  I'd probably also avoid installing the software add-on from HP, if you print only and you don't need features beyond what is in the base OS X distribution.

  The process of CEPHtmlEngine consuming resources system generally involves the Adobe software; see the for more details on this Adobe forums.

• question of case structure

  I have 3 case structures in another... say I want to create a new structure of matter during all of these existing business structures. so you have real and it shows each of the structures case etc. When you go to false, all existing within the moment disappear.

  My question is, what about when you pass false, the exisiting structures arise, as sub set to true by default

  Thank you

  Right-click and duplicate the real structure, remove the additional false.

  /Y

• HP Pavilion g6-1200tx air winds (fan) questions

  laptop: HP Pavilion g6-1200TX

  Product number: QG468PA #ACJ

  operating system: Windows 7 ultimate 64-bit

  Mr President

  winds (fan) to air my laptop don't work properly and became quite noisy.

  This has led to very poor game performance. Earlier (6 or 7 months ago) while playing games (NFS THE RUN), the fan worked with great speed and therefore keep the laptop in a cool and also giving pretty good framerate between (18-25).

  But when I play now the fan remains completely rotate with very less speed and heat the laptop as radically. As a result the droped framerate (8-12). Even FULL HD videos run quite poorely.

  I spend loads of time to update all components (BIOS, chipset graphic everything), but it does not solve this problem.

  also, I restored my laptop and updated every thing, but again the rest of the question.

  I thing I should have my fan cleaned or replaced.

  Pls inform me of the cost for cleaning of the fan and also replacing the fan.

  I bought my laptop on October 25, 2011. Noida, Delhi, India.

  PLS ANSWER

  Thank you for visiting the Forums from HP Support. I'm sorry but this is a community of peer-to-peer HP customers and not a venue to contact HP directly. Most of the users here is consumers like yourself that offer solutions because they like to help others and HP employees that you see are here on their own abilities and not representing does not society.

  If you have additional or direct comments for HP on their products or services or questions on the repair, you can use the link below for contact information.

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  If you have other questions and concerns about the use of the forum, please do not hesitate to send me a private message.

• 1 problem and 1 Question

  I just got a Sansa discovered refurb 16 GB for Christmas and tried to get some movies on this thing.  Its been a real pain.  I have VOB so Any Video Converter files, I tried and it has lip sync problems.  Tried the settings from here: http://forums.sandisk.com/sansa/board/message?board.id=view&message.id=4413&jump=true#M4413

  and they did not work.  Tried the settings from here: http://forums.sandisk.com/sansa/board/message?board.id=view&thread.id=6068

  and he got the view to play videos but with the lip sync problem.  I tried to change the A / V sync basic, no luck.  video framerate to 29.97 is not an option, only 25 to 30 I think, but certainly not 29.97.

  I have not yet tried formatoz.com, but will probably tonight.  Any suggestions?  I have about 8 hrs a value of time lost so far...

  Now to the question: I have about 5 VOB files by film I would like to transfer and I was wondering whether or not point of view seamlessly pass the 1st mp4 to another.  If not, I'm pretty well, do anyone knows how to convert these 5 VOB files into a single file to be converted to mpeg-4 (mp4), or a shortcut to the 5 files just convert a mp4?

  Thanks in advance.  I usually love challenges, but it becomes a little hand.

  Well, I found a program called "Hand brake" courtesy of lifehacker.

  http://handbrake.fr/

  I think that should do it.  its supposed to be one of the best free programs out there, and you can use it instead of Any Video Converter.

  If for any reason any who does not work for me, I'll use some type of program "Carpenter" to make the case.  Check download.com and type of Carpenter.