Most of the squandering of speed

Similar Questions

• Satellite P305D-S8828 - fan runs most of the time

  On my new Satellite P305D - S8828 17 "fan seems to work most of the time, fled to 01:45 for: dry then on new 50." I have the schema defined on "balanced" & the unit is based on a cooler aluminium frame (no fans on radiator).

  Basically, ventilation under the unit must be very very good compared to flat on a desk. Room temperature. is about 78 F. The unit is basically idling & the fan runs at low speed most of the time. Sometimes it ramps at high speed for about 30 seconds. I can go to Circuit City and check another, but anyone know if this is normal behavior?

  I tried a non-Toshiba notebook & I do not remember the fan being audible to all! This laptop was horrible buttons on the touchpad well, so I prefer this Toshiba.

  I think that the fan runs up constantly when a movie is playing. I heard a change in BIOS to set the fan turns too, but do not know what is available on this platform. Any help is appreciated, because I can still return unit for something else.

  BTW, Wireless G is on, but no traffic running on AC & battery not charging. The fan is sometimes we'RE for: 30 & off at 01:00.
  Thank you

  Hello

  you already updated your BIOS to the latest version? If not already I highly recommend you to do a BIOS update might improve these things like fan control and other equipment low-level things related.

  Check this [SITE | http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp] for a BIOS update that applies to your machine.

  Welcome them

• laptop (Dell Inspiron) with Windows 7 Home Premium is now slow to most of the activities - loading of the pages in the browser, etc.

  I heard that after a few years of use, Windows-based computers lose their ability to function. This happened to me before and I bought a new laptop. Now, I think that it happens again. The laptop (Dell Inspiron) with Windows 7 Home Premium is now slow to most of the activities - loading of the pages in the browser, etc... He is also declining my VPN connection occasionally, but also my direct connection is very slow. Latency shows speedtest software provided by the ISP in addition of 250 ms, download speed of 1 MB/s (compared with 8 planned) and 0.05Mbps download. The ISP has corrected this once, but I'm wondering now if it is the computer which is slow rather than on the network because my laptop works well on the same network/router. Is there one solution to this other than another new laptop?

  Jonathan,

  You say that your computer is slow, but all of the examples you give are rather than slow computer operations slow network communications.  To avoid any unnecessary work, check how fast the computer is on the tasks that don't use any network.

  If it works fine for tasks not network then you can concentrate on the problems of network as being the only concern.

  It has also become very slow for no network tasks you should study other causes.  Just as an example: If, like me, you sleep / turn off the computer when you are not using it then defrag will never work, so you can run it manually to make sure that doesn't cause problems.   Describe your symptoms in this thread so that someone can advise on the best course of action.

  In the unlikely case where you must run Dell Factory Image Restore, then the instructions are in your manual PC *.  Before doing this, run Dell Datasafe Local Backup then click on Backup, recovery to create - media allows you to create a bootable USB of the partition that you can use the normal procedure that failing Dell Factory Image Restore [to do this, even if you have already solved your problems so that you could face if the hard drive has failed never completely].

  * Procedure Dell Factory Image Restore [excerpt from the manual for Dell Inspiron 1545]

  1. turn on the computer.

  2 when the Dell logo appears, press several times to access the Advanced Boot Options window.

  Note: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop; then, shut down your computer and try again.

  3. Select repair your computer.  The System Recovery Options window appears.

  4. Select a keyboard layout and click Next.

  5. to access the recovery options, log in as a local user. To access the command prompt, type administrator in the user name field, and then click OK.

  6. click on Dell Factory Image Restore. The Dell Factory Image Restore welcome screen appears.

  Note: Depending on your configuration, you may need to select Dell, then Dell Factory Image Restore factory tools.

  7. click on next. Data delete screen is displayed.

  Note: If you do not wish to continue Factory Image Restore, click Cancel.

  8. check the box to confirm that you want to continue reformatting the hard drive and restoring the system software to the factory condition, then click Next.  The restore process begins and may take five or more minutes. A message appears when the operating system and the applications installed in the factory have been restored to the State of the plant.

  9. click Finish to restart the system.

• Implementation error "Applicatipn has stopped working" at the opening of most of the applications.

  * Original title: Windows error

  Applicatipn has stopped working

  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  Basically, this error comes with most of the applications on my Windows 7 Professional 64 X bit. This error comes up with Gadgets, games and other applications. I don't really know what to do. I tried to clean the disc, search for viruses but everything seems fine. Could someone help me with this situation?

  Hello

  Error: Windows Explorer has stopped working
  http://support.Microsoft.com/kb/2694911

  Crashes Windows or freezes<- try="" these="" first="" and="" the="" methods="" do="" apply="" to="" your="">
  http://support.Microsoft.com/kb/2681286#method22

  Performance and Maintenance<- check="" these="" especially="" the="">
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-7&V2H=win7tab1&V3H=winvistatab1

  Other methods of troubleshooting to use according to your needs:

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Open the troubleshooter of Performance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at Applications.
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp
  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - set
  SEE drivers to hide Microsoft - update those without drain in their names. (Also
  updated the BIOS and drivers from the chipset on the site of the constructor/the system motherboard).

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  How to stop Windows 7 automatically install drivers
  http://support.Microsoft.com/kb/2500967

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Should we leave how much free space on the C drive before affecting the performance and speed?

  Hello!

  Hard drive of my new PC (C) is 1 TB (processor Samsung 7i, Windows 8.1). It doesn't have any other disk/partition. How this space is safe to use to store large files (videos, esp., stored in the native video library file) without harming the performance and speed?

  And if I create another partition (D) and just use it for storage, it will make much difference compared to the above?

  Thank you!

  Anna

  Sunday, March 1, 2015 10:59 + 0000, AnaFilipaLopes wrote:

  And if I create another partition (D) and just use it for storage, it will make much difference compared to the above?

  Planning your Partitions

  The Question

  Partitions, how much should I have on my hard drive, what do I use
  each of them for, and what size should each one be?

  It s a common question, but unfortunately this doesn t have a
  only simple, just answer to all the world. A lot of people will respond with
  the way they do, but their response isn't necessarily best for the
  person seeking (in many cases it isn't right even for the person)
  response).

  Terminology

  First, let's rethinking the terminology. Some people ask "should I".
  partition my drive? That s the wrong question, because the
  the terminology is a little strange. Some people think that the word
  "partition" means divide the drive into two or more partitions.
  That s not correct: to partition a drive is to create one or several
  partitions on it. You must have at least one partition to use
  He who think they have an unpartitioned disk actually
  have a player with only one partition on it and it s normally
  Called C:. The choice you have is to have more than one
  partition, not that it's the partition at all.

  A bit of history

  Back before Windows 95 OEM Service Release 2 (also known as Windows
  95 (b) was published in 1996, all MS-DOS and Windows hard drives have been set
  using the file system FAT16 (except for very tiny to aid
  FAT12). That 16-bit only because were used for addressing, FAT16 has a
  maximum 2 GB partition size.

  More than 2 GB of hard disks were rare at the time, but if you had
  one, you must have multiple partitions to use all the available
  space. But even if your drive was not larger than 2GB, FAT16 created
  Another serious problem for many people - the size of the cluster has been
  more great if you had a larger partition. Cluster sizes increased from 512
  bytes for a partition to no greater than32Mb all the way up to 32 KB for a
  partition of 1 GB or more.

  More the cluster size, the space more is wasted on a hard drive.
  That s as space for all the files is allocated in whole clusters
  only. If you have 32 KB clusters, a 1 byte file takes 32 KB, a file, a
  greater than 32 k byte takes 64 k and so on. On average, each file
  about half of his last group waste.

  If large partitions create a lot of waste (called "soft"). With a 2 GB
  FAT16 drive in a single cluster, if you have 10,000 files, each
  lose half a cluster of 32 KB, you lose about 160 MB for relationships. This s
  back in an important part of a player that probably cost more than $400
  1996 - around $ 32.

  So what did the people? They divided their 2 GB drive in two,
  three or more logical drives. Each of these logical drives has been
  smaller the real physical disk, had smaller clusters, and
  so less waste. If, for example, she was able to keep all the partitions
  less than 512 MB, cluster size was only 8 KB, and the loss was reduced to a
  a quarter of what it would be otherwise.

  People partitioned for other reasons also, but back in the days of
  FAT16, it was the main reason to do so.

  The present

  Three things have changed radically since 1996:

  1. the FAT32 and NTFS file systems came along, allowing a larger
  partitions with smaller clusters and so much less waste. In
  with NTFS, cluster sizes are 4 K, regardless of the size of the partition.

  2 hard drives have become much larger, often more than 1 TB (1000 GB) in
  size.

  3 hard drives have become much cheaper. For example, a 500 GB drive
  can be bought today for about $50. That s 250 times the size of this
  Player 2Gb typical 1996, about one-eighth of the price.

  What these things mean together which is the reason to be old to have
  multiple partitions to avoid the considerable wastage of disk space left.
  The amount of waste is much less than it used to be and the cost of
  that waste is much less. For all practical purposes, almost nobody does
  should no longer be concerned about slack, and it should no longer be
  has examined when planning your partition structure.

  What Partitions are used for today

  There are a variety of different ways people put in place several
  scores of these days. Some of these uses are reasonable, some are
  debatable, some are downright bad. I'll discuss a number of Commons
  partition types in the following:

  1. a partition for Windows only

  Most of the people who create such a partition are because they believe
  If they never have to reinstall Windows properly, at least they
  He won t lose their data and he won t have to reinstall their applications.
  because both are safe on other partitions.

  The first of these thoughts is a false comfort and the second
  is downright bad. See the analysis of the types of partition 2 and 4
  below to find out why.

  Also note that over the years, a lot of people who find their windows
  partition that has begun to be the right size proves to be too
  small. For example, if you have such a partition for Windows and later
  upgrade to a newer version of Windows, you may find that your Windows
  partition is too small.

  2. a partition for installed programs

  This normally goes hand in hand with the partition type 1, a partition for
  just Windows. The thought that if you reinstall Windows, your
  installed application programs are safe if they are in another
  partitions is simply not true. That s because all programs installed
  (with the exception of an occasional trivial) have pointers to the inside
  Windows, in the registry and elsewhere, as well as associated files
  buried in the Windows folder. So if Windows, pointers and
  the files go with it. Given that the programs need to be reinstalled if Windows
  the fact, this reasoning to a separate partition for programs not
  work. In fact, there is almost never a good reason to separate
  Windows of the software application into separate partitions.

  3. a partition for the pagefile.

  Some people think mistakenly that the pagefile on another
  score will improve performance. It is also false; It doesn t
  help and often I hurt, performance, because it increases the movement of the head
  to get back to the page to another file frequently used
  data on the disk. For best performance, the paging file should normally
  be on the most widely used score of less used physical player. For
  almost everyone with a single physical disk than the same drive s
  Windows is on C:.

  4. a partition for backup for other partitions.

  Some people make a separate partition to store backups of their other
  or partitions. People who rely on a "backup" are a joke
  themselves. It is only very slightly better than no backup at all.
  because it leaves you likely to be simultaneously the original losses
  and backup for many of the most common dangers: the head crashes and other
  types of drive, serious glitches to power failure, near lightning
  strikes, virus attack, even stolen computer.  In my opinion,.
  secure backup must be on a media removable and not stored in the
  computer.

  5. a partition for data files

  Above, when I discussed separate Windows on a clean partition,
  I pointed out that separate data from Windows is a false comfort if
  He of done with the idea that data will be safe if Windows ever
  must be reinstalled. I call it a false comfort that's because
  I'm afraid many people will rely on this separation, think that their
  data are safe there and so do not take measures to
  Back it up. In truth the data is not safe there. Having to reinstall
  Windows is just one of the dangers to someone a s hard disk and not
  probably even one. This kind of "backup" falls into the same
  category, as a backup to other partitions partition; It lets you
  sensitive to the simultaneous loss of the original and the backup on many of
  the most common dangers that affect the entire physical disk, not
  just the particular partition. Security comes from a solid backup
  diet, not how partition you.

  However, for some people, it may be a good idea to separate Windows and
  programs on the one hand of the data on the other, putting each of the
  two types into separate partitions. I think that most people
  partitioning scheme must be based on their backup system and backup
  plans are generally of two types: whole hard disk imaging
  or data only backup. If you back up data, backup is
  usually facilitated by the presence of a separate with data only partition;
  to save just the score easily, without having to
  collect pieces from here and elsewhere. However, for
  those who backup by creating an image of the entire disk, there is
  usually little, if any, benefit the separation of data in a partition of
  its own.

  Furthermore, in all honesty, I must point out that there are many
  very respected people who recommend a separate partition for Windows,
  Whatever your backup plan.  Their arguments haven t convinced
  me, but there are clearly two views different here.

  6. a partition to image files

  Some people like to deal with the images and videos as something separate
  other data files and create a separate partition for them. To my
  the spirit, an image is simply another type of data and there is no
  the advantage in doing so.

  7. a partition for music files.

  The comments above related to the image files also apply to music
  files. They are just another type of data and must be dealt with the
  just like the other data.

  8. a partition for a second operating system to dual-boot to.

  For those who manage several operating systems (Windows Vista, Windows
  XP, Windows 98, Linux, etc.), a separate partition for each operating
  system is essential. The problems here are beyond the scope of this
  discussion, but simply to note that I have no objection to s
  all these partitions

  Performance

  Some people have several partitions because they believe that it
  somehow improves performance. That s not correct. The effect is
  probably low on modern computers with modern hard disks, but if
  whatever it is, the opposite is true: more music mean poorer
  performance. That's because normally no partition is full and it
  so are gaps between them. It takes time for the drive s
  read/write heads to cross these gaps. Close all files
  are, faster access to them will be.

  Organization

  I think a lot of people overpartition because they use scores as a
  organizational structure. They have a keen sense of order and you want to
  to separate the apples from the oranges on their readers.

  Yes, separating the different types of files on partitions is a
  technical organization, but then is to separate different types of
  files in folders. The difference is that the walls are static and
  fixed in size, while the files are dynamic, changing size automatically
  as needed to meet your changing needs. This usually done records
  a much better way to organize, in my opinion.

  Certainly, partitions can be resized when necessary, but except with the latter
  versions of Windows, which requires a third-party software (the and the
  possibility to do so in Windows is primitive compared to the third-party
  solutions). These third party software normally costs money and not
  any point and how stable it is, affects the entire disk.
  with the risk of losing everything. Plan your partitions in
  first place and repartitioning, none will be necessary.  The need
  to repartition usually occurs as a result of overpartitioning in
  the first place.

  What often happens when people organize with partitions instead
  records are that they make a miscalculation of how much room they need on each
  This partition, and then when they run out of space on the partition
  When a file is logically, while having plenty of space
  on the other hand, they simply saving the file in the score of "poor".
  Paradoxically, therefore, results in this kind of score structure
  less organization rather than more.

  So how should I partition my drive

  If you read what came before, my findings will not come as a
  surprise:

  1. If your backup set is the image of the entire disk, have just one
  single (usually c partition :));

  2. If you backups just data, have two partitions one for Windows and
  application programs installed (usually c :)), the other for data
  (normally D :).)

  With the exception of multiple operating systems, it is rarely
  any advantage to have more than two partitions.

• Need help with the remapping of speed

  So here's my question. (check the photo below to see the chronology)

  I'm working on a script and I have a clip somewhere in the middle of this timeline. Now, I put two markers that close off the area of the clip I want to idle. And then I drag the rubberband now at 50%. This causes the clip obviously become longer.

  But the problem is that it doesn't push the clip that comes later, it submerges just sort of and I lose a part of the clip that I put in slow-mo.

  http://gyazo.com/0cce5ab07e22897f21a25e3308a9cbb5.PNG Here is a picture of my calendar.

  So my question is how can I make sure that the clip is pushed forward automatically?

  I know how to solve this problem with some dragging and pulling, but I want to be as effective as I can not get into bad habits.

  Thank you!

  If all you want to do is simply slow down or speed up a clip, use the settings speed/duration - it is probably the simplest way to induce a change in speed. It is a change of pace, you can also do it with the time remapping effect - which is what I think you did.

  The advantage of the time remapping effect, is that it allows variable speed changes within a single instance of an element. For example, suppose that you would like your item to start at 100% speed, slow down immediately at 25%, then immediately speed up to 200%. You can do this with speed/duration, simply by razoring the clip to the specific points where you want the speed change occur and then change the setting of the speed/duration to this instance of the item. With the time remapping effect, not only can you do this without having to cut the clip, but you can also create "ramps" from one speed to the other - where the aspect of variable speed. You can even freeze a clip or reverse the trend, all without having to edit the clip into small pieces. This can result in a much smoother effect, but it would still be not what you're after. Redefinition of the time has a bit of a learning curve, but it's really the most powerful of the two. Simply decide what is best for your application.

  An additional advantage and I may be wrong on this, but I think that using the remapping effect temporal results function of (theoretically) more high quality speed change effect thanks to an algorithm different or some-such. It uses different techniques to generate the interpolated images created in a change of speed, which should look smoother than if they were done with the command of speed/duration.

  Hope the helps a little.

• 10.0 Safari cannot connect to most of the servers

  With the help of El Capitan 10.11.6 on a MacBook Pro 2011 which has worked fine until... I did the update of Safari 10 today (with iTunes and Camera RAW updates, iTunes is very well and I do not use RAW images). Now Safari does not load most of the sites. For example: Google and work, but apple.com and ask.com discussions.apple.com do not work. "Safari can't connect to the server. Don't use not VPN or OpenDNS, no change in Network preferences.

  Have you tried:

  Restarted Safari

  Connected to the Admin ACCT. (Safari works fine it; loading all pages, so this problem is specific to my normal user account)

  Caches allowed via the menu Developer

  Deleted cookies

  Restarted Mac.

  Turned off WiFi and reset modem and router

  Added the new network location & remove the old (by suggestion of Apple forum)

  Turn off all extensions of Safari (Pinboard, LastPass, JSblocker)

  Ran Malwarebytes using current data files (found nothing)

  Anyone have any other suggestions?

  Safari - no support for third-party modules can cause Safari to suddenly quit, or have performance problems

  Safari does not load a page or webpage elements are missing

  Safari / other browsers - Web site does not

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

  If it works in safe mode, try to run this program when it is started normally, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• Why most of the work has disappeared from the artist list in the update of iTunes 12.5.1 and 10 IOS and how I get it back?

  Update to the latest version of iTunes on my iMac and update my iPhone to IOS10 why most of the work in the list of artist in my iTunes library disappeared, and how do I get it back?

  Hello

  If you use iTunes game, try here > get help with iTunes - Apple Support

• The membership tab IS on and still no button send and most of the other options are not the useablee

  Under file, display, editing and all the other tabs, most of the functions does not work. The Send button is not working either.

  Hello

  To better help you with your question, please provide us with a screenshot. If you need help to create a screenshot, please see How to make a screenshot of my problem?

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.

  Thank you!

• Apple os 9.3.3 charged down behind my back and now my i phone will not open most of the apps because there is not enough memory.  I see that I have 40 GB of memory left on the cloud over 50.  Question, how can I use my pc to see what has been done

  Apple os 9.3.3 charged down behind my back and now my i phone will not open most of the apps because there is not enough memory.  I see that I have 40 GB of memory left on the cloud over 50.  How can question, I use my pc to see what has been downloaded on the cloud?

  Your question has nothing to do with iCloud. You should remove unnecessary data from your phone to free up about 10% of your phone's storage space.

• Can't remove most of the songs or videos in 12.4.1.

  Can't remove most of the songs or videos in 12.4.1. Delete does not appear in the context Menu. After finding duplicates, remove is grayed out in the Menu of the song. Drag to the trash does not work. Delete key does not work. Keyboard shortcuts do not work. That is what it is? I double videos and unwanted songs and I can't get rid of them!

  Withoutascent

  These options are not available in smart playlists, if that's where you are trying to delete.

• I get an 'Error Javascript applet' ad in most of the pages in Firefox?

  It is a problem for me with most of the Web sites when I try to open them in Firefox. It does not exist in other browsers (IE, Chrome).

  This has been fixed (by guigs2; Thank!)

• Why most of the files by e-mail in local folders open with the Message Search screen?

  Not much more to say. Instead of open and display the message headers and the preview window, most of the E-mail files opens with message search window. It seems that the size of folders or something small to display headers of message, messages in the folders.

  There are a lot of free disk space (300 MB +) on the drive where the local folders.

  Is there a setting in Thunderbird I can shape where I can change this behavior?

  Thanks for your help.

  With anti anti-virus programs we just recommend the creation of an exclusion for the Thunderbird profile folder and see the people for the antivirus provider. Malwarebytes (my experience is the free version) is limited. but this seems to be the information you need https://helpdesk.malwarebytes.org/entries/23474946-How-do-I-stop-Malwarebytes-Anti-Malware-from-blocking-scanning-a-file-or-program-that-I-trust-

  Note that the exclusion should be for your mail and your e-mail IMAP folders. To get the path to them. Open correct information in the menu help and select the button display folder. Because these files do not contain any executable files or files that would be open by other thing than Thunderbird there should be very very little risk of such an exclusion (I won't tell. Because it's always the exception that proves the rule)

• Thunderbird is very slow, most of the time does not? (user uses McAfee). RESOLVED after user removed the virus using McAfee

  "After a windows update and an adobe flash update yesterday / this morning, thunderbird either works very slowly and most of the time, it is not meet and crashing." I doesn't have any setting on my computer. So can you please help me, so I can read my mail

  McAfee released an update problem. Please contact McAfee support helps to correct your settings from McAfee. I heard good things about their cat in today.

• SQLite Manager does not work with the v11. Until make you it easier to go back to older versions or newer versions stop, breaking most of the modules I won't use Firefox

  SQLite Manager does not work with the v11. Until that make it easier to return to older versions or newer versions stop, breaking most of the modules I use FirefoxHow to come back at 10 Firefox?

  Update Firefox 23.0 which published yesterday afternoon.

  • https://www.Mozilla.org/en-us/Firefox/all/