Most recent version of the guest operating system as the host of the basic version?

Similar Questions

• How can you change the guest operating system on a host after 4.0 set to level.

  On ESXi 3.5 U4 all FreeBSD guests were built with "Other Linux (32 bit)".  How can I change them to FreeBSD (32 bit) now that I've upgraded to 4.0?  I stop the host and I tried to change it but it does not give me the option to FreeBSD.

  The virtual machine must be turned off before upgrade you your virtual hardware. If you click on a turned off the virtual computer, you will have an option that says upgrade virtual hardware

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• Does anyone know the hard drive id assignment in windows guest operating system.

  I have a guest operating system windows 2003 host VMware ESX 3.5 U4.

  There are 4 new added HDD by using configuration settings for this virtual machine.

  2 SCSI hard disk 0:1

  3 SCSI hard disk 0:2

  4 SCSI hard disk 0:3

  hard drive 5 SCSI 1:0

  And then in windows 2003, these four hard drives have been recognized as disc 1-Disc 4 with new Volume F, E, H, G.

  So my question is how much is hard disk scsi 2 0:1?

  What is the relationship?

  Depending on your response, I think that following the relationship, is this correct?

  Fix.

  André

• The VM startup slow down, delay long before the guest operating system begins startup

  Evaluation of VMWare to set up the VM for the maintenance of the software. Set up a virtual machine, install Windows 7 SP1 32-bit, everything works well. Once started, the performance is excellent.

  The symptom is that when you start the virtual machine, either starting from cold boot or suspend, there is a significant delay before the power of VMware on / start screen is displayed. Once it appears, the operating system starts starting (or the recovery of wakefulness) quickly and performance is normal after that. During the start-up period, the whole system is insensitive, host and guest operating system.

  See the extract of newspaper below to 09:54:28.619 moment where the delay occurs followed by the entry concerning 09:55:11.625 time when start continues, a delay of 43 seconds during which nothing seems to happen and the system does not respond. After that, everything is fast.

  Any ideas or suggestions?

  More info...

  VMware Player version 6.0.1 build-1379776

  Host PC: Dell Optiplex, Intel Core2 Quad Q9650 3.00 GHz ABLE to

  Installed memory: 4.00 GB (3.25 GB usable)

  Boot disk C: Intel SSD, 180GB (where the VMware is installed)

  Data disk F: Seagate 1 TB (where the virtual machine)

  SE host: Windows 7 Professional 32-bit SP1

  Guest OS: Windows 7 Professional 32-bit SP1

  excerpt from VMware.log:

  2014 02-19 T 09: 54:28.619 - 05:00 | VMX | I120: VMMEM: initial booking: 1442MB (1024MB = MainMem)

  2014 02-19 T 09: 54:28.619 - 05:00 | VMX | I120: MemSched_PowerOn: minGuestSize ball 104857 (80% size required min 131072)

  2014 02-19 T 09: 54:28.619 - 05:00 | VMX | I120: MemSched: mem reserved (in MB) min max recommended 128 2493 2493

  2014 02-19 T 09: 54:28.619 - 05:00 | VMX | I120: PShare: activated 1 1 Adaptive scanRate [16, 400]

  2014 02-19 T 09: 54:28.619 - 05:00 | VMX | I120: MemSched: mem 5159 262144 np 35890 pg 590258 anon

  2014 02-19 T 09: 55:11.625 - 05:00 | VMX | I120: MemSched: numvm 1 locked pages: num 0 max 605661

  2014 02-19 T 09: 55:11.626 - 05:00 | VMX | I120: MemSched: locked Page limit: host 638514 config 638208 dynam 613853

  2014 02-19 T 09: 55:11.626 - 05:00 | VMX | I120: MemSched: minmempct 50 minalloc 0 admitted 1

  2014 02-19 T 09: 55:11.626 - 05:00 | VMX | W110: NUMA: application of automatic dimensioning VM ignored

  configuration (.vmx) VM file:

  . Encoding = "windows-1252".

  config.version = '8 '.

  virtualHW.version = "10".

  scsi0. Present = 'TRUE '.

  scsi0.virtualDev = "lsisas1068".

  SATA0. Present = 'TRUE '.

  memsize = "1024".

  MEM.hotadd = 'TRUE '.

  scsi0:0. Present = 'TRUE '.

  scsi0:0. FileName = "BCDEVVM.vmdk".

  SATA0:1.present = 'TRUE '.

  SATA0:1.filename = "E:".

  SATA0:1.DeviceType = "cdrom-raw"

  ethernet0. Present = 'TRUE '.

  ethernet0. ConnectionType = "bridged".

  ethernet0.virtualDev = "e1000".

  ethernet0.wakeOnPcktRcv = "FALSE".

  ethernet0. AddressType = 'generated '.

  USB. Present = 'TRUE '.

  EHCI. Present = 'TRUE '.

  ehci.pciSlotNumber = "35".

  Sound.Present = 'TRUE '.

  sound.virtualDev = 'hdaudio '.

  sound.fileName = 'speakers (SoundMAX Integrated D.

  Sound.AutoDetect = "FALSE".

  MKS. Enable3D = 'TRUE '.

  Serial0.present = 'TRUE '.

  Serial0.FileType = "thinprint".

  pciBridge0.present = 'TRUE '.

  pciBridge4.present = 'TRUE '.

  pciBridge4.virtualDev = "pcieRootPort"

  pciBridge4.functions = '8 '.

  pciBridge5.present = 'TRUE '.

  pciBridge5.virtualDev = "pcieRootPort"

  pciBridge5.functions = '8 '.

  pciBridge6.present = 'TRUE '.

  pciBridge6.virtualDev = "pcieRootPort"

  pciBridge6.functions = '8 '.

  pciBridge7.present = 'TRUE '.

  pciBridge7.virtualDev = "pcieRootPort"

  pciBridge7.functions = '8 '.

  vmci0. Present = 'TRUE '.

  hpet0. Present = 'TRUE '.

  usb.vbluetooth.startConnected = "FALSE".

  displayName = "BCDEVVM."

  guestOS = "windows7"

  NVRAM = "BCDEVVM.nvram."

  virtualHW.productCompatibility = "hosted".

  gui.exitOnCLIHLT = "FALSE".

  powerType.powerOff = 'soft '.

  powerType.powerOn = 'soft '.

  powerType.suspend = 'soft '.

  powerType.reset = 'soft '.

  extendedConfigFile = "BCDEVVM.vmxf".

  gui.lastPoweredViewMode = "full screen".

  UUID. BIOS = "56 4 d d2 32 bb c9 b7 bd 3 c d2 46 59 38 e3 e6 f2"

  UUID. Location = "56 4 d d2 32 bb c9 b7 bd 3 c d2 46 59 38 e3 e6 f2"

  Replay.Supported = "FALSE".

  Replay.FileName = «»

  scsi0:0. Redo = «»

  pciBridge0.pciSlotNumber = "17".

  pciBridge4.pciSlotNumber = "21".

  pciBridge5.pciSlotNumber = "22".

  pciBridge6.pciSlotNumber = "23".

  pciBridge7.pciSlotNumber = "24".

  scsi0.pciSlotNumber = "160".

  usb.pciSlotNumber = "32".

  ethernet0.pciSlotNumber = "33".

  sound.pciSlotNumber = "34".

  vmci0.pciSlotNumber = '36 '.

  SATA0.pciSlotNumber = "37".

  scsi0.sasWWID = "50 05 05 62 bb c9 b7 b0.

  ethernet0.generatedAddress = "00: 0C: 29:E6:38:E3.

  ethernet0.generatedAddressOffset = '0 '.

  vmci0.ID = "1508260067".

  vmotion.checkpointFBSize = "134217728.

  cleanShutdown = 'TRUE '.

  softPowerOff = 'TRUE '.

  USB:1.speed = '2 '.

  USB:1.present = 'TRUE '.

  USB:1.DeviceType = "hub".

  USB:1.port = "1".

  USB:1.parent = "-1".

  SATA0:1.AutoDetect = "FALSE".

  tools.syncTime = "FALSE".

  unity.wasCapable = "FALSE".

  tools.remindInstall = "FALSE".

  toolsInstallManager.updateCounter = '1 '.

  checkpoint.vmState = «»

  Monitor.virtual_mmu = "automatic".

  Monitor.virtual_exec = "automatic".

  USB:0. Present = 'TRUE '.

  USB:0. DeviceType = 'hidden '.

  USB:0.port = "0".

  USB:0.parent = "-1".

  USB. Generic.AutoConnect = "FALSE".

  serial1. Present = 'TRUE '.

  serial1. FileName = "COM1".

  floppy0. Present = "FALSE".

  Hello

  I know what you want to say as I've seen sometimes as well. But especially on older hardware or if there are problems with regard to particular resources. For example I saw this on an ESX host (yes I know product different) where there was a problem with the storage not enough providing IOPS / s.

  I saw also this on older versions of Linux (IIRC 7) workstation where the host had an Atom based CPU, there I updated to more RAM and a more recent version of the workstation and the problem disappeared.

  Then I also saw it on the 4/5 merger when my host operating system was out of memory and I tried to start another operating system to prompt anyway.

  I do not consider a normal behavior for the slow start and does not respond, it is an indication that the hypervisor is seeking some resources, but does not receive them fast enough.

  The reasons can be many. Indeed things like antivirus could be biting you if she tries to analyze all files (including virtual disks) at their opening.

  FWIW, I also understand the support response as would be expected if your host is a bit thin on the resources (for example, trying to start a VM 1 GB on a host Win7 with only 3.5 GB of RAM) and if the virtual machine runs OK after the initial startup delay, it's mostly just an annoyance.

  --

  Wil

• Performance problem with the guest operating system

  Hello gurus - I have one of the most unusual questions, I ran into a few time.   Here it is:

  I have a guest w2008R2 OS - installed in a 5.1 version of VM 7 vSpherer - which has an Emulex LPe 12002-E 8 GB dual HBA port is assigned to the as 2 PCI (1 device per port) via DirectPath devices

  The guest operating system has an application that performs backup tests.   WWPN of the HBA is zoned in the fabric and declared in the interface of Compellent Storage Center and everything is good here. the application creates a replay of a volume, mount it as a drive, read all the blocks, then dismantles and moves then repeat the process with what ever additional volumes should be safeguarded.   It is so cool I have do this with a VM right and not a physical host?  (would be cool if I had work NPIV but that's another story, not with technology HBA vendor support...)

  So, what's the problem?   Well, the bed the mounted disk backup will work extremely slow as slow as 5MB\sec flow, then during any other activity takes place on the system the flow jumps up to 150MB\sec all of a sudden and will continue to run fast for a long time and finish jobs on time with each work taking a little more than an hour.  But when the slow going the same work (all jobs are the same, they are simply by reading all the blocks of a bunch of 200 GB volumes and wrote a set of NULL value, do not forget this is just test) takes up to 10 hours to complete.

  I think that what is the culprit?   POWER MANAGEMENT.

  I have just about each performance counter and the journal of events known to man and I don't see anything abnormal on the table, ESXi virtual machine, nothing.  But what I see in the newspapers is any kind of activity that could happen in a transparent manner to save energy.

  FACTS on this case:

  -Reservation of memory is defined (it must be for directpath otherwise, you can't power on the virtual machine)

  -Booking CPU - has not been defined before an hour ago, I gave her just a small reserve for this rule, so I do not know if this will help alleviate the slow flow, or have an effect on what I think is a question of power (unit linked) management

  -windows power management is set to high performance never-ever - but not until an hour there doesn't I changed advanced settings for USB Disabled------turned off.  PCI peripheral energy saving setting was already off.  Which is in contradiction with my theory.  But maybe, just maybe, something is broken somewhere, or could be a bug... blah blah blah

  -the HBA, Emulex, as it appears in Device Manager in the guest OS doesn't have a power management tab to disable the feature, I don't see that the adapter VMXNET3 had this tab, and I turn off the power save setting to be conservative, do not think that it was the culprit, but as there is no real data running through the NIC.  The data is simply to be read from the disk mounted, not copied on any wire Ethernet.  never the less, in the Emulex properties is a Details tab and a selection of power data, and performance data indicate you what power mode, the device is, as well as feeding supported systems.  D0: full power, but D3, which shows as supported by the device, is an energy saving mode.   I could not yet attend the setting at the time of slow activity, my good intention as soon as possible. He is currently shooting in D0, full power.

  This is so what I have to offer on this, I hope that its just...   If I'm missing something, or if others have experienced this massive loss of unknown flow without reason and have resolutions, please share.

  If there is a way for me to disable power on the Emulex HBA management inform you please, I don't mind if I stop to enter the firmware, if that was even possible.  But if possible I would disable it immediately before any new tests are executed.

  The root cause of this issue has never been identified by VMware support which for me is a question of ugly.  Reservation of CPU for the VM using directpath IO with HBA installed in it corrected the problem.  I'd be leary with direct path IO.

• CPU pegged at 100% in the guest operating system

  Hi all

  New to this forum, so I hope I'm posting in the right place. Note that I'm not our VMware admin, but rather, I have a server I have to admin that has been converted to VM via the P V. apparently process, our group has converted nearly 50 PMs successfully and of course one of mine is the only one who has a problem now. We have a custom application that has been developed to synchronize data between ESRI GIS and databases SAP. The code is about 7 years old and runs on a version of Oracle (9.2) and is Java based, both on the same vintage. It is not possible to upgrade by the creator going out of business and not having is not the source code. I ask this to understand that the problem is probably with the programming, but thought it was worth it.

  Anyway, one of our guard batch process fail with a Java out of memory error on the virtual machine. It works well on the PM. A consultant ran the diagnosis with a Profiler memory on the virtual machine and concluded that the program never went beyond 256 MB and we have 1 GB allocated to the guest. We now consider the CPU issues. The only other thing we know is different is a matter of hyperthreading (HT). The PM is certainly HT'd (1 physical CPU showing that 2) and it does not appear that this setting met on the virtual machine. When you run the package on the PM, we see 2 CPUs in the Task Manager, and neither hits 100% for more than a few seconds for the whole process. On the virtual machine, we see a flatlined CPU and it is 100% most of the time until it fails about 15 min in.

  The sysinfo on the virtual machine shows a 2400 MHz CPU, while the PM shows (2) 3400 MHz CPU (due to HT). I checked all my other virtual machines, and they are all 'show' 2400 MHz, so this must be a virtual standard machine type? I think that the virtual computer guest has access to the CPU ramp according to the needs, but then I'm not clear why the task manager would show that he attached the entire lot? It is likely that task manager prompt indicates whether flatlined to 100% of a 2400 Mhz CPU, even if she isn't really the most? If this is really the most, our admin should not be able to increase the dedicated CPU (I looked at the console with him and did not see an obvious option for this)? Is it possible to enable hyperthreading on the * comments * OS to mimic what has had on the PM? We cannot add another CPU to the guest due to licensing issues. Oh yes, the guest operating system is windows server 2003 and VMware ESXI 4.1 server. Thank you very much!

  G

  The speed of the CPU that you see is the speed of the physical processor in ESXi hosts. You cannot increase this speed, however - licensing - usually, you can assign two vCPUs, virtual machine as a dual CPU core instead of 2 processors. This option has been added to ESXi 4.1. See http://kb.vmware.com/kb/1010184 for more details.

  What you need to do is to set the number of processors to 2 and add the advanced parameter cpuid.coresPerSocket = 2.

  André

• I uninstalled the old version of Adobe Reader and tried to download the most recent version; However, I get a message indicating that the new version is already installed.  Adobe is not listed as an Application on my computer.

  I was unable to update Adobe Reader in my computer; then I uninstalled the program.  When I tried to download the latest version of Adobe, I received a message stating that the most recent version of Adobe is already installed on my computer. I don't see Adobe on the list of applications on my computer, any suggestions on what to do? Thank you...

  Hi annac88455204,

  Could you please tell me which OS is running on your system?

  You must remove all traces of the previous versions of reader in order to download a new.

  On windows platform, you can try running the cleaning from the indicated link tool:Download Adobe Reader and Acrobat cleaning tool - Adobe Labs.

  Restart the computer and then try to download the new version from the links provided: https://get.adobe.com/reader/enterprise/

  Please let us know if this solves your problem.

  Concerning

  Sarojini

• T of what guest operating systems will start the VMware Support for EFI?

  Is there a list of support guest OS for the EFI firmware?  Mianly supported by VMware - do not try, fail, call support technique etc etc.   My experiences on the TP forums, I guess that there is not.  Some OS (such as Windows Server) come with a screen to choose BIOS/EFI firmware.  If not, you need to go to setting > Hard Drive OPtions-> advanced _ > boot using EFI.  In particular there at - it versions of Linux that you give you option of BIOS/EFI firmware before the confutation of VM is complete, so the hard drive then be custom.

  We will officially support the EFI firmware for any guest operating system to which all the following conditions are met:

  • We list this guest operating system, supported in the VMware Compatibility Guide for operating systems and your virtualization product.
  • The guest operating system supports EFI in the operating system installation media.
  • Support the guest OS EFI has no catastrophic flaws (for example Fedora 12 x 64, FreeBSD 11, Centos 6.0 through all the 6.2 have catastrophic flaws).

  New computer virtual assistant of 11 workstation has only the option of EFI firmware for Windows clients.  Special mention, do not yet support us Easy Install for non EFI customers in 11 workstations.  For all other customer support EFI OSes, you can do a manual installation after choosing the EFI firmware in the virtual machine settings > Options > Advanced > Boot with EFI instead of the BIOS.

  I don't understand your concern about the personalization of the hard drive... Could you elaborate?

  See you soon,.

  --

  Darius

• Help. The CPU has been disabled by the guest operating system. Power off or reset the virtual machine. WHY?

  Greetings.

  I have a 5.5 with an operating system Red Hat 5.10 ESXi environment. The OS worked fine until a few days ago. ESXi displays the error "the CPU has been disabled by the guest operating system. Power off or reset the virtual machine. I Don t know why my server displays the error if my environment was OK. Could be a kernel problem? operating system problem?

  Ideas?

  Thanks for the help.

  Have a look here. http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=2000542

  Did you recently patch your VM? Looks like when the guest operating system runs the incorrect commands that it can have a deactivated processor.

• CPU has been disabled by the guest operating system error

  Running VMPlayer 3.1.3 version 324285 build on Windows 7 Enterprise 64 bit with 8G of memory.

  When I try to install some VMs based on Linux of ISOs, in a few seconds, I get the error:

  "The CPU has been disabled by the guest operating system. You must turn off or reset the virtual machine at this point. »

  (See also the screenshot attached)

  This happens on other ISOs based on Linux/Windows. I googled the web & VMTN, but have not found relevant

  answer my question.

  Thanks in advance

  Alex

  Hello

  What operating system is tryining install you?

  Take a minute to watch in VMware Compatibility Guide: search guest conductor /and try to upgrade to a version 3.1.4 If your system does not support the direct execution of 64-bit.

  Concerning

• Sharing of content between the guest operating system

  Hello

  Y at - it a simple way to share content between operating systems.

  We have invited several BONES that make similar task. Run us simultaneously with the slightly different variant, but basically, most of the files that are needed in each guest operating system are the same.

  What I want to achieve is to build a repository of centralized files accessible across operating systems. I'm running Win7 and WinXP Win2008 OSes on ESXi 5 comments.

  I found this thread, but it is too old.

  http://communities.VMware.com/message/630923#630923

  I'm hoping there have been changes since that thread has been discussed.

  Thank you

  Well, I can't tell you much about the user experience expected without knowing the network load. However, if install you the file server as an another VM on the same host, you will have at least a 1GBit/s connection between the virtual machines.

  André

• the movement of the cursor and other keys mapped to the guest operating system

  Host operating system is fedora 10.  Guest operating system is Windows XP Pro.  The arrow of special keys, group of 4 and at home, delete, insert, etc., group of 6 on a typical keyboard on the host computer are not mapped to the guest OS.  Anyone know how this can be corrected?

  Thank you

  Jeepers

  Same problem for me, but I found the solution via google a few weeks ago and I think there's a post on this forum about this as well. But here's my version...

  in your user directory, it must be a directory .vmware.

  Inside this directory must be a file named config, otherwise create it

  in the config file should be a line like this:

  xkeymap.nokeycodeMap = true

  If this isn't there, add it.

  Remotely close sessions and reconnect. Problem solved!

  Other messages on the Internet are talking about doing this on the host machine when running VMware workstation, but it works well enough for the VMware remote console.

  Sure just what do you on the computer that is running the Remote Console and not the host machine, run the virtual machine.

• Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  Try to add a page to a pages document. It worked until now but just finished page 13 with text and photos and cannot add another page, using macbook pro with El Capitan and the most recent version of the Pages.

  You have placed your beam to insert at the end of your text on page 13 and then apply Insert menu: Page Break? In the v5.6.2, Pages I just add a new page to a section of four pages to this approach.

• I have Firefox 38.2.0 and it tells me that it is the most recent version but online there is version 40 + and it won't let me install it.

  My OS is Windows 10. I have Firefox 38.2.0 and it tells me that it is the most recent version. However, I got emails telling me to upgrade to the latest version which seems to be in the 40s. When I go to the https://www.mozilla.org/en-US/firefox/new/ website, it tells me
  "Looks like you are using an older version of Firefox."

  So I click on upgrade and it loads a file "stub". I close in Firefox, go to the folder where the file is located and run it. At the end of the process, he told me that Firefox still works and I have to close it for the new version to load. Then I go to the Task Manager, and he told me that no request to don't run! I went through this process three times without any positive result.

  What to do?

  I'll answer your question, but I suggest not changing your version of Firefox until find us out if having to do any with your plant, discussed here: https://support.mozilla.org/questions/1078897

  At some point, there are two different versions of Firefox:

  • Public release of the standard/large: currently Firefox 40.0.2
  • Extended support release (ESR): currently Firefox 38.2.0

  The version of ESR is intended for companies who need maximum stability for their users. New features usually are not added for at least six months, although security patches are issued approximately every six weeks.

  You want to switch to the standard version? If so, this is how I suggest to do:

  Clean reinstall it

  We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (not incompatible, corrupt or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

  (A) download a fresh Installer for Firefox 40.0.2 of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

  (B) the release of Firefox (if any).

  (C) to rename the program folder, either:

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\FxESR
  

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\FxESR
  

  (D) run the installer downloaded to (A). It should automatically connect to your existing settings.

  Note: Some plugins can only exist in the old folder. If it is missing something essential, present in these files:

  • \FxESR\Plugins
  • \FxESR\browser\plugins

• Sometimes, I get a notice from a site that Firefox needs an update. When I go into FIrefox, it says that I use the most recent version. What is happening?

  I wonder if these sites are trying to make me download malware or virus. If I go to the Firefox site and it says that I use the most recent version, I think Mozilla tells me and wonder "why a site told me that I have to update? I hope only that Mozilla and not blindly download something without studying. Am I paranoid?

  No, it's a scam which is the link to the site, mozilla does not use a site to ask you to update, it uses an automatic update.

  You can report it here

  • http://www.Mozilla.org/en-us/legal/fraud-report/index.html