Motion by lines on a map

Similar Questions

• How to add directional lines on a map in a phone book to show the destinations?

  Directions in iPhoto do not match the real software. How do I add directional lines on a map to show where we left and where are final destination will be?

  What version of iPhoto do you use?  Or you use 'Photos for Mac', as you post the pictures to Mac forum?

  In iPhoto 9.6.1 between that you can add markers place lines by activating the lines in the options for the cards.  The value 'Lines' 'Right' or 'curve '.

  

• draw lines on a map in paint

  Hello

  How to draw a line on a map in the painting of windows 7 with the line tool?  in older versions of paint, I could draw a line and click and then move to the next area.  in windows 7, I can draw a line, but there are two white dots at each end.  I clicked, double clicked, right click... nothing changes.  the only way to get the line to stay on the plan is to stick and the back arrow.  If I paint multiple directions on a map, it gets old fast.

  so, how to draw any line of the size of the point a to point b and he can stay?

  Thank you

  After experimenting with the whole program, I can now draw lines and place them where they should go on any card.  He just took the time to experiment and try different methods.

• What should I use to draw lines on a map?

  Is it a drawing of the tool that you can attach to your computer to draw lines? The cursor is not precise enough to draw lines on a map (jpeg). Is there a tool I can buy and fix to draw on my screen using PS?

  Thank you post again - I recommend no doubt using the pen for what you are trying to do. Trying to map free hand lines is very difficult, but the pen tool offers precise control. I have outlined some steps for you to follow below.

  1. open your image and select the Pen tool from the toolbar, as shown below.

  

  2. I would recommend zoom in your image to make it easier for you to track on the lines of the complex plane. To do this, select view > Zoom In, or hitting "control +" (Windows) or ' command + ' (Mac) on your keyboard.

  

  3. then create a new layer by clicking the new layer in the layers panel, as shown below. Draw your lines of card on a new layer to preserve your original map image in case you make a mistake or want to start over.

  

  4 using the Pen tool, tracing on the lines of the map of your boot image. Here I begin to Bellevue and suite I90 to Ellensburg. Using the tool pen takes some practice. To get detailed help about how to use the pen tool, watch videos of Terry White I linked in my previous post.

  

  5. Once you have finished tracing over the lines of the map, go in the tracks Panel by clicking on the "Paths" tab in your layers panel.

  

  6. in the tracks Panel, click the icon of the path highlighted below. This caresseront the way you created using your most recent Brush tool settings - I will go into this more again to the next step.

  

  7. you can see that the way that I created with my pen tool has been rubbed with yellow and aligns very well with the original line of the card. You can change the size and color of your run by selecting the Brush tool in the toolbar and clicking the tools described below.

  

  8. when I have to zoom out, you can see I have drawn precisely the line of the card. I did it very quickly so with patience, you can create extremely accurate map lines.

  

  I highly recommend watching the video of Terry White on how to use the pen tool. The pen tool is the best way to create very relevant and precise lines apart from the purchase of an external drawing tablet.

  I hope this has helped! Good luck!

• How to draw lines on a map with CS4

  I have CS4 and would like to know how to draw lines on a map image. I'm a beginner, so what do I do?

  It's about CS6, but CS4 would be a similar process:

  Here's a way to draw a line:

  

  Select the pen tool.

  

  Make a new layer which will be placed on top of the existing layer in the map.

  

  Draw a line with the pen tool, you can see the points that I made to create curves.

  Here is more information on the pen tool: http://psd.tutsplus.com/tutorials/tools-tips/photoshops-pen-tool-the-comprehensive-guide/

  http://www.Tutorial9.NET/tutorials/Photoshop-tutorials/pen-tool-basics-in-Photoshop/

  

  In Photoshop, you have to go back to the options bar and select "shape". This allows you to place a 'coup' on the path (line) that you just created. Otherwise, it will not be displayed.

  

  You can see the settings in the Option bar above, I did. I made that Fill was placed on 'none', and I chose a color for my race, but also a point of size for the thickness of the line until its visible on my card.

  

  It comes to the final.

  Good luck!

  Janelle

• wall of lines on the map in illustrator?

  I work with a geographer who has exported a file .ai from the Arc GIS mapping software. I have no problem editing the file it has generated, but the two lines below have not come as they appear here. I tried to find a way to reproduce these using the function of race but so far no luck. for the bottom one using a white dotted line on a continuous black line looked very much like a straight line, but when applied to curved lines needed for this art that they also staggered, "boxes became the shape of the keys and lost their aspect square points. Anyone know how to get this effect of changeable lines?

  

  Create 2 squares (a zero filled) and their project with the brush you, choose the point clouds brush.

  

  Set the rotation relative to the path

  

  You will have 2 shots in your appearance. One is the brushstroke for places, the other a regular feature. Add a transformation command to compensate for one of the paths so the trike's not going until the middle of the square.

  .

  You can use a dotted rather than scatter brush, but that wouldn't work for your triangles.

  There are small flaws with the help of brush of scatterplots (without distortion) or brush model (distorted, maybe too) features on the curved parts, but if your curves are minimal, as shown in the example, you'll have to worry about that.

• How image card lines on a map

  How can you get lines map image on a map of the State? Here is an example of a card that I want to use with lines of panoramic. I want the hyperlink to pages using Dreamweaver.

  

  You need to export in the form of "layers" of photoshop first. This will create a separate files for each of the layers (lines & card separately).

  You can then use the tutorial link I gave you to the 'layer' these images upward in an area of your Web site. You can link images with lines anywhere you want.

  However, for starters, you can use the polygon hotspot so that it can work. Maybe later when you have time, take a look at the tutorial reference that I posted.

• Limit the number of lines A map can use

  Hello
  
  I try to use the "world/world_wo_gr.amap" card, but I'm having a problem for the page to load.
  
  When I assign a value to each countty map does not load, but when I reduce the number i.e. to countires starting with A or B or C, then the page load very well. Is there a limit on the number of rows that a card can process?
  
  I have a table with contains the country and dial code and I am just by selecting in that it contains 237 lines.
  
  This card works
  
  SELECT NULL LINK, COUNTRY LABEL, c_desc
  FROM (select the country "Country Code - ' |") ISO_COUNTRY_CODES |', dial the Code - ' | COUNTRY_CODE CC_INFO c_desc
  where substr (country, 1, 1) in ('A', 'B', 'C'))
  
  http://Apex.Oracle.com/pls/Apex/f?p=16335:4
  
  
  
  but this map fails to load completely
  
  SELECT NULL LINK, COUNTRY LABEL, c_desc
  FROM (select the country "Country Code - ' |") ISO_COUNTRY_CODES |', dial the Code - ' | COUNTRY_CODE CC_INFO c_desc)
  
  http://Apex.Oracle.com/pls/Apex/f?p=16335:6
  
  
  
  
  Any ideas?

  Hi Andy,.

  You have reached a limit that has been put in APEX 4.0 on the maximum number of rows retrieved for a query of card. That limit was not enough high for examples like the one you reported, where the result set could potentially return 200 + folders for all points on the selected card. This limit has been removed in the APEX 4.0.1 and you will now be able to retrieve the complete set of results for your card. By default, the lines in the map Wizard max will be now set to 300, but that can be changed on the page "Query" in the wizard, or on the page of the map, as for the chart series. Sorry for the inconvenience, Andy, but the solution will be available in our next version 4.0.1 patch APEX.

  Kind regards
  Hilary

• Remove lines from the file export with scripts

  Hi all

  I'm trying to remove some lines after their mapping in FDMEE given a condition. Here I have an example of the source file:

  Account	Currency	Currency source	Company	Amount
  100000	EUR	USD	XX	100
  100000	USD	USD	XX	120
  200000	EUR	AUD	XXX	10
  300000	EUR	EUR	XXX	20
  200000	AUD	AUD	XXX	10

  I want to remove from the export file, lines that are red. I mapped to the column currency to ignore all the currencies EUR (maybe it's not necessary) to have:

  Account	Currency	Company	Header 4
  100000	EUR	YY	100
  100000	IGNORE	YY	120
  200000	EUR	YYY	10
  300000	EUR	YYY	20
  200000	IGNORE	YYY	10

  Currency source is not necessary, but I am without mapping it. I'm new in FDMEE and in the scripts, but I thought that maybe a script custom or an AftExportToDat but I'm naïve... Could someone help me please?

  Thank you!

  Hello

  using custom application as application target in FDMEE?

  If you define mappings to IGNORE as Simon suggests that they should not be exported to the file. They are always exported? I do not expect that

  If the lines are exported so that you can use AftExportToDat to remove currency field lines to IGNORE.

  Probably, you will need to create a new empty file, then go through the lines of your export file and write that in the new file if CURRENCY <> IGNORE

  Better would be to Enable export file value not so you can write your own script to export the data in the event your want to TDATASEG for the current LOADID

  (Ex: SELECT...) OF TDATASEG where LOADID =? AND the MOTTO <> 'IGNORE')

  where? fdmContext ["LOADID'] is passed within the parameter list

  Concerning

• Is it possible to make a moving line of the 'Flight Plan of Indiana Jones' style?

  Hello

  I was wondering if I could recreate a red moving line (on a map) which goes to show that people of progress have already done.

  Do you remember the scene from Indiana Jones movies (and old movies of BW) where the plane flies over the map.

  I just need a way to have a movement of aircraft/dot/X from A to B drags a red line behind it. There is no need of a dotted line.

  Is this possible?

  If Yes, so that the learners to drag this object themselves along a defined path would be too much to ask for, I guess...

  Thank you very much!

  I see, that's why I think that the approach of the State is best, but it will not be animated.

• Can I specify more than one master para to the mapping of the page?

  Hello

  I want to map the same master page to be used by the four different tags. Should I create a new line in the mapping for each table or can we separate the names of tags by a comma and a space, for example, 'body, Bullet, Heading1, Note "?

  I tried the latter and should work, but it did not.

  Thank you

  Sean

  >... to create a new line in the mapping for each table...

  That works and it has no side effects I've seen.

  It appears, moreover, that FM applies the Member from the first tag found para which has a MasterPageMaps table entry, so multiple matches per page, even contradictory, are not a problem, as long as obtaining the Member first found is OK with you.

• to access shared folders on the cmd line?

  Hi, I'm trying to copy files to the shared folders on the command line. some research I found a few references to use the net use command to associate files with a virtual drive:

  NET use z:
  . host\y (where there is the shared folder)

  or

  NET use z:
  . host\shared folders\y

  However, the syntax is wrong, or this is the wrong approach entirely. pointers would be much appreciated

  Thank you!

  Either you use:

  "NET use."
  VMware-host\Shared files.

  This will be the map a network drive that contains folders in it...

  ... or you use the deep link:

  "NET use."
  VMware-host\Shared Folders\vmware»

  to directly map a shared folder as a network drive.

  BTW: The best way to know what you need on the command line is to map the "Shared Folders" in law by clicking on it in Windows Explorer and then run "net use" to see how it has been mapped.

  André

• FDM mapping of natural credit/debit accounts and changing the sign of the amount

  Hi people,
  
  Any help with this would be really appreciated. I know that FDM interpret tracking by Dr. as positive numbers and those followed CT as negative, but it does not distinguish if this figure relates to an expense (account of natural flow) or income (natural credit) account... I need FDM to interpret natural credit account type (receipts) as its flow as a negative and a positive still. For natural flow (expense accounts), I need the balances to be always positive and the credit balance to be always negative.
  
  How can we achieve this MDF? is there a built-in feature or do we add script? Ideally I need to do during the mapping phase and not the import... THX!

  You can reverse the sign of the accounting in the FDM account mapping, there is a ceckbox that select you / deselect in each line of the mapping. This is how to enforce the good signange for accounts.

• limit 'Remove all' to one mapping

  Hi all
  
  Activities-> maps, when I click on 'Delete All' for mapping explicit, it automatically delete other applications (LIKE, IN maps). Can someone tell me how to limit this "Delete All" option for perticular mapping (SIMILAR, either EXPLICITLY or IN between).
  
  Also, how can I select all the lines in the map downloaded both table?
  
  
  Thanks in advance,
  Lisa

  Hi Lisa, what you feel is out of the box feature. All mappings are stored in the same underlying table grouped and identified uniquely by location and Dimension code. The web interface is divided into groups on separate pages for readabilty that only, i.e. it will not limit what is removed. To do this a selective deletion, you would havve to write some custom sql to do a selective delete. I don't advise it doing so a better alternative would be to do the following:

  (1) export mappings that you want to selectively to bulk delete for excel
  (2) remove the mappings that you want to remove from the Excel template
  (3) in the web interface 'delete all '.
  (4) import the updated Excel model which has the deleted selected mppings.

  Not sure what you mean by selecting all the lines, but you will not be able to do it via the web interface

• SQL help (line column... a little)

  I'm a little weird to write query. I want to turn rows into columns, but they must be grouped by line # as well. They will have to be group by tracking #...
  
  The other issue is, the system can have 5 minimum options and a maximum of 7. Here are the options...
  
  So, in reality, he will be taking a set of lines (misc 5-7) and returning to the side to make the columns. But, the new column headers are always defined like this max 7 and 2 can be cancelled on if not available...
  
  Confusing even explain... insert statement for example 2 below... we have 6, 7 criteria we met...
  
  ----------------------------------------------------------
  Sector of activity
  Type
  Did you review the user guide?
  Application
  Enter your Message
  Have you reviewed the FAQs?
  Tracking number of EIS
  -----------------------------------------------------------
  
  
  
  
  
  Insert into the TABLE
  (FIELDVALUES CAN ONLY BE TRACKINGNUMBER, NM_PARM)
  Values
  (323646, 'application', "DRI INT");
  Insert into the TABLE
  (FIELDVALUES CAN ONLY BE TRACKINGNUMBER, NM_PARM)
  Values
  (323646, 'Enter your Message', 'test');
  Insert into the TABLE
  (FIELDVALUES CAN ONLY BE TRACKINGNUMBER, NM_PARM)
  Values
  (323646, 'have you seen the FAQ document?', 'No');
  Insert into the TABLE
  (FIELDVALUES CAN ONLY BE TRACKINGNUMBER, NM_PARM)
  Values
  (323646, 'have you reviewed the user's guide?', 'No');
  Insert into the TABLE
  (FIELDVALUES CAN ONLY BE TRACKINGNUMBER, NM_PARM)
  Values
  (323646, "line of Business", "AUTO");
  Insert into the TABLE
  (FIELDVALUES CAN ONLY BE TRACKINGNUMBER, NM_PARM)
  Values
  (323646, 'Type', 'Suggestion');
  Insert into the TABLE
  (FIELDVALUES CAN ONLY BE TRACKINGNUMBER, NM_PARM)
  Values
  (323647, 'application', 'BEST');
  Insert into the TABLE
  (FIELDVALUES CAN ONLY BE TRACKINGNUMBER, NM_PARM)
  Values
  (323647, 'Enter your Message', 'test');
  Insert into the TABLE
  (FIELDVALUES CAN ONLY BE TRACKINGNUMBER, NM_PARM)
  Values
  (323647, 'have you seen the FAQ document?', 'No');
  Insert into the TABLE
  (FIELDVALUES CAN ONLY BE TRACKINGNUMBER, NM_PARM)
  Values
  (323647, 'have you reviewed the user's guide?', 'Yes');
  Insert into the TABLE
  (FIELDVALUES CAN ONLY BE TRACKINGNUMBER, NM_PARM)
  Values
  (323647, 'Number of EIS path', 'none');
  Insert into the TABLE
  (FIELDVALUES CAN ONLY BE TRACKINGNUMBER, NM_PARM)
  Values
  (323647, "line of Business", "MAPS");
  Insert into the TABLE
  (FIELDVALUES CAN ONLY BE TRACKINGNUMBER, NM_PARM)
  Values
  (323647, 'Type', 'Question');
  COMMIT;

  with "TABLE" as
  (
  (select 323646 TRACKINGNUMBER, 'Application' NM_PARM, 'DRI INT' FIELDVALUES from dual)
  union all
  (select 323646 , 'Enter Your Message', 'test'  from dual)
  union all
  (select 323646 , 'Have you reviewed the FAQ document ?', 'No'  from dual)
  union all
  (select 323646 , 'Have you reviewed the User guide ?', 'No'  from dual)
  union all
  (select 323646 , 'Line Of Business', 'AUTO'  from dual)
  union all
  (select 323646 , 'Type', 'Suggestion'  from dual)
  union all
  (select 323647 , 'Application', 'BEST'  from dual)
  union all
  (select 323647 , 'Enter Your Message', 'test'  from dual)
  union all
  (select 323647 , 'Have you reviewed the FAQ document ?', 'No'  from dual)
  union all
  (select 323647 , 'Have you reviewed the User guide ?', 'Yes'  from dual)
  union all
  (select 323647 , 'ISW Tracking Number', 'none'  from dual)
  union all
  (select 323647 , 'Line Of Business', 'CARDS'  from dual)
  union all
  (select 323647 , 'Type', 'Question'  from dual)
  )
  , t as
  (
  select distinct TRACKINGNUMBER tn from "TABLE"
  )
  select
   (select FIELDVALUES from "TABLE" where NM_PARM = 'Application' and TRACKINGNUMBER = t.tn) "Application"
  ,(select FIELDVALUES from "TABLE" where NM_PARM = 'Enter Your Message' and TRACKINGNUMBER = t.tn) "Enter Your Message"
  ,(select FIELDVALUES from "TABLE" where NM_PARM = 'Have you reviewed the FAQ document ?' and TRACKINGNUMBER = t.tn) "Have you reviewed FAQ?"
  ,(select FIELDVALUES from "TABLE" where NM_PARM = 'Have you reviewed the User guide ?' and TRACKINGNUMBER = t.tn) "Have you reviewed User gui?"
  ,(select FIELDVALUES from "TABLE" where NM_PARM = 'ISW Tracking Number' and TRACKINGNUMBER = t.tn) "ISW Tracking Number"
  ,(select FIELDVALUES from "TABLE" where NM_PARM = 'Line Of Business' and TRACKINGNUMBER = t.tn) "Line Of Business"
  ,(select FIELDVALUES from "TABLE" where NM_PARM = 'Type' and TRACKINGNUMBER = t.tn) "Type"
  from t
  

  Application Enter Your Message Have you reviewed FAQ? Have you reviewed User gui? ISW Tracking Number Line Of Business Type
  ----------- ------------------ ---------------------- --------------------------- ------------------- ---------------- ----------
  DRI INT     test               No                     No                                              AUTO             Suggestion
  BEST        test               No                     Yes                         none                CARDS            Question